Repaints Trend Reversal for ThinkorSwim

Repaints
Status
Not open for further replies.
royalrock said:
http://tos.mx/VNXwnbK --imported this successfully but does not show up any where...can you help
Click to expand...
Sorry to say that you're not following the discussion and misunderstood my post. The link that I posted is to display that I do know how to make a custom column in a watchlist for a complicated code. The custom column that I'm discussing is for the Trend Reversal indicator. Solving that problem is the issue that I'm asking. Please read my previous posts. This link http://tos.mx/VNXwnbK is only an example. It is not the problem that I am asking about. I already have this link http://tos.mx/VNXwnbK as a functioning custom watchlist column and I'm not asking about it. I'm asking about making the Trend Reversal Scanner into a custom watchlist column, because I went through the same process to try to make it as the example link that I posted. The link is only an example to show you that I know the process, but it is not working for the Trend Reversal indicator. So I did use the process that MerryDay suggested and it worked for the link that I posted, but did not work for the Trend Reversal indicator.

These are two different unrelated indicators. One is the Wavy Tunnel indicator which I did not have any problem with and is already functioning in my ThinkOrSwim and the other is the Trend Reversal Scanner which I went through the same process, but I cannot get it to function. Although I did go through the process of using the Wizard to apply the code to a custom column, there is something in the code that is preventing it to complete the process. This is what I cannot figure out over numeral attempts. I came to a point after a large number of attempts to try to get it to work, so I'm seeking help from this forum to find out why. So the last several posts that you showed me is not related to what I'm asking, because you're showing me the use of an indicator that I already have in use. You're showing me how to use the Wavy Tunnel indicator and not the Trend Reversal Scanner. The Wavy Tunnel indicator is not related to the Trend Reversal Scanner and is not my question.

Does anyone know how to use this indicator in a custom watchlist? This is what I've got so far and I cannot get it to work. Help someone?

Code: 
# Trend Reversal Scanner
# Scanner by https://usethinkscript.com/u/theelderwand
# Discuss https://usethinkscript.com/d/183-trend-reversal-indicator-with-signals-for-thinkorswim

def price = close;
def superfast_length = 9;
def fast_length = 14;
def slow_length = 21;
def displace = 0;

def mov_avg9 = ExpAverage(price[-displace], superfast_length);
def mov_avg14 = ExpAverage(price[-displace], fast_length);
def mov_avg21 = ExpAverage(price[-displace], slow_length);

#moving averages
def Superfast = mov_avg9;
def Fast = mov_avg14;
def Slow = mov_avg21;

def buy = mov_avg9 > mov_avg14 and mov_avg14 > mov_avg21 and low > mov_avg9;
def stopbuy = mov_avg9 <= mov_avg14;
def buynow = !buy[1] and buy;
def buysignal = CompoundValue(1, if buynow and !stopbuy then 1 else if buysignal[1] == 1 and stopbuy then 0 else buysignal[1], 0);

def Buy_Signal = buysignal[1] == 0 and buysignal == 1;
def Momentum_Down = buysignal[1] == 1 and buysignal == 0;

def sell = mov_avg9 < mov_avg14 and mov_avg14 < mov_avg21 and high < mov_avg9;
def stopsell = mov_avg9 >= mov_avg14;
def sellnow = !sell[1] and sell;
def sellsignal = CompoundValue(1, if sellnow and !stopsell then 1 else if sellsignal[1] == 1 and stopsell then 0 else sellsignal[1], 0);
def Sell_Signal = sellsignal[1] == 0 and sellsignal;


input method = {default average, high_low};
def bubbleoffset = .0005;
def percentamount = .01;
def revAmount = .05;
def atrreversal = 2.0;
def atrlength = 5;
def pricehigh = high;
def pricelow = low;
def averagelength = 5;
def averagetype = AverageType.EXPONENTIAL;
def mah = MovingAverage(averagetype, pricehigh, averagelength);
def mal = MovingAverage(averagetype, pricelow, averagelength);
def priceh = if method == method.high_low then pricehigh else mah;
def pricel = if method == method.high_low then pricelow else mal;
def EI = ZigZagHighLow("price h" = priceh, "price l" = pricel, "percentage reversal" = percentamount, "absolute reversal" = revAmount, "atr length" = atrlength, "atr reversal" = atrreversal);
rec EISave = if !IsNaN(EI) then EI else GetValue(EISave, 1);
def chg = (if EISave == priceh then priceh else pricel) - GetValue(EISave, 1);
def isUp = chg >= 0;
def EIL = if !IsNaN(EI) and !isUp then pricel else GetValue(EIL, 1);
def EIH = if !IsNaN(EI) and isUp then priceh else GetValue(EIH, 1);
def dir = CompoundValue(1, if EIL != EIL[1] or pricel == EIL[1] and pricel == EISave then 1 else if EIH != EIH[1] or priceh == EIH[1] and priceh == EISave then -1 else dir[1], 0);
def signal = CompoundValue(1, if dir > 0 and pricel > EIL then if signal[1] <= 0 then 1 else signal[1] else if dir < 0 and priceh < EIH then if signal[1] >= 0 then -1 else signal[1] else signal[1], 0);

def bullish = signal > 0 and signal[1] <= 0;
plot upArrow = bullish;
upArrow.SetPaintingStrategy(PaintingStrategy.BOOLEAN_ARROW_UP);
#upArrow.SetDefaultColor(CreateColor(145, 210, 144));
upArrow.AssignValueColor(Color.Light_Green);
#AddLabel(yes, "Buy", Color.Lime);


def bearish = signal < 0 and signal[1] >= 0;
plot downArrow = bearish;
downArrow.SetPaintingStrategy(PaintingStrategy.BOOLEAN_ARROW_DOWN);
#downArrow.SetDefaultColor(CreateColor(255, 15, 10));
downArrow.AssignValueColor(Color.Pink);
#AddLabel(yes, "Sell", Color.Pink);

# AddLabel(yes, if Bullish then ("Buy", Color.Lime) else Bearish ("Sell" , Color.Pink);

# =========================================
# Buy/Sell Signal
# =========================================
plot BuyAlert = bullish;
plot SellAlert = bearish;

BuyAlert.AssignValueColor(if BuyAlert then Color.Green else if SellAlert then Color.Red else Color.White);
AssignBackgroundColor(if BuyAlert then Color.Green else if SellAlert then Color.Red else Color.White);

Alert(BuyAlert, "Buy", Alert.BAR, Sound.Ring);

AddOrder(OrderType.BUY_AUTO, BuyAlert, tickColor = Color.Dark_Green, arrowColor =  Color.Dark_Green, name = "Buy");
AddOrder(OrderType.SELL_AUTO, SellAlert, tickColor = Color.Dark_Red, arrowColor = Color.Dark_Red, name = "Sell");

AddLabel(yes,
        if BuyAlert then Concat("BUY@ ", AsText(hl2, NumberFormat.Dollar)) else if SellAlert then Concat("SELL@ ", AsText(hl2, NumberFormat.Dollar)) else "", if BuyAlert then Color.Dark_Green else if SellAlert then Color.Dark_Red else Color.White);
Click to expand...
 
Last edited:

New Indicator: Buy the Dip

Check out our Buy the Dip indicator and see how it can help you find profitable swing trading ideas. Scanner, watchlist columns, and add-ons are included.

Download the indicator

Picard said:
Ok. I made the Trend_Reversal_Scanner Alert, but I need it to repeat for every buy signal. Does anyone know how to do that?

http://tos.mx/sZoZpVF
Click to expand...

Code: 
#Heiken_Ashi based on Sylvan Verboort's Trading with HA Candlestick Oscillator
#Bon Bon _last update Jan 17th 2021
#Influenced by script from HoboTheClown / blt,[URL]http://www.thinkscripter.com[/URL], TD Hacolt etc.
#MTF based on HannTech's MTF_MACD script
#update 1/2/21 - changed the default moving average to TEMA.  Changed the period to 35.
#update changed reversal arrows to reversal bubbles with price

### YOU MUST HAVE THE STYLE SETTING FIT STUDIES ENABLED ###
#hint: The style setting Fit Studies must be enabled to use these bars.


input period = 50;
input hideCandles = yes;
input candleSmoothing = {default Valcu, Vervoort};
input show_bubble_labels = yes;
input bubbles = yes;
input arrows = yes;


#input smoothingLength = 3;

input movingAverageType = {default  TEMA, Exponential, Hull };

def openMA;
def closeMA;
def highMA;
def lowMA;

switch (movingAverageType) {
case Exponential:
    openMA = CompoundValue(1, ExpAverage(open, period), open);
    closeMA = CompoundValue(1, ExpAverage(close, period), close);
    highMA = CompoundValue(1, ExpAverage(high, period), high);
    lowMA = CompoundValue(1, ExpAverage(low, period), low);

case Hull:
    openMA = CompoundValue(1, HullMovingAvg(open, period), open);
    closeMA = CompoundValue(1,  HullMovingAvg(close, period), close);
    highMA = CompoundValue(1,  HullMovingAvg(high, period), high);
    lowMA = CompoundValue(1,  HullMovingAvg(low, period), low);

case TEMA:
    openMA = CompoundValue(1, TEMA(open, period), open);
    closeMA = CompoundValue(1, TEMA(close, period), close);
    highMA = CompoundValue(1, TEMA(high, period), high);
    lowMA = CompoundValue(1, TEMA(low, period), low);

}


HidePricePlot(hideCandles);

def haOpen;
def haClose;

switch (candleSmoothing){
case Valcu:
    haOpen = CompoundValue(1, ( (haOpen[1] + (openMA[1] + highMA[1] + lowMA[1] + closeMA[1]) / 4.0) / 2.0), open);
    haClose = ((((openMA + highMA + lowMA + closeMA) / 4.0) + haOpen + Max(highMA, haOpen) + Min(lowMA, haOpen)) / 4.0);
case Vervoort:
    haOpen = CompoundValue(1, ( (haOpen[1] + (openMA[1] + highMA[1] + lowMA[1] + closeMA[1]) / 4.0 ) / 2.0), open);
    haClose = ((((openMA + highMA + lowMA + closeMA) / 4.0) + haOpen + Max(highMA, haOpen) + Min(lowMA, haOpen)) / 4.0);

}

plot o = haOpen;
o.Hide();

def haLow =  Min(lowMA, haOpen);
def haHigh = Max(highMA, haOpen);

#Zero Lag System - MetaStock Crossover Formula
#zero-lagging principle
#Zero-lagging TEMA average on closing prices

#Medium-term price reversals - upward trend

def avg = 34;
def TMA1 = reference TEMA(haClose, avg); # triple exponential moving average (TEMA) of 34 bars
def TMA2 =  reference TEMA(TMA1, avg);
def Diff = TMA1 - TMA2;
def ZlHa = TMA1 + Diff; #Zero-lagging TEMA average on closing prices - medium term uptrend;

#Medium-term price reversals - downward trend
def TMA1_ = reference TEMA((high + low) / 2, avg);
def Diff2 = TMA1_ - TMA2;
def ZlCl = TMA1_ + Diff2; #Zero-lagging TEMA average on closing prices - medium term doenwardtrend;

def ZlDif = ZlCl - ZlHa; # Zero-Lag close - Zero-Lag HA(green candle) Uptrend when ZlDif is equal to or greater than zero

#uptrend {green candle}
def keep1 = if (haClose >= haOpen and haClose[1] >= haOpen[1]) then 1 else 0;
def keep2 = if ZlDif >= 0 then 1 else 0;
def keep3 = if (AbsValue(close - open) < ((high - low) * 0.35)) and high >= low[1] then 1 else 0;
def keeping = if (keep1 or keep2) then 1 else 0;
def keepall = if keeping or (keeping[1]) and close >= open or close >= (close[1]) then 1 else 0;

def utr = if keepall or (keepall[1]) and keep3 then 1 else 0;

#downtrend red candle

def keep1_ = if (haClose < haOpen and haClose[1] < haOpen[1]) then 1 else 0;
def keep2_ = if ZlDif < 0 then 1 else 0;
def keep3_ = if (AbsValue(close - open) < ((high - low) * 0.35)) and low <= high[1] then 1 else 0;
def keeping_ = if (keep1_ or keep2_) then 1 else 0;
def dkeepall_ = if keeping_ or (keeping_[1]) and close < open or close < (close[1]) then 1 else 0;

def dtr = if dkeepall_ or (dkeepall_[1] - 1) and keep3_ == 1 then 1 else 0;  #downtrend
def upw = if dtr and (dtr[1]) and utr then 1 else 0;
def dnw = if !utr and (utr[1] ) and dtr then 1 else 0;

def results = if upw then 1 else if dnw then 0 else results[1];

#Change the color of HA and Japanese Candles - turn off to show only HA on chart
#AssignPriceColor(if haClose >= haOpen
                 #then Color.GREEN else
                 #if  haClose < haOpen
                 #then Color.RED else Color.WHITE);


#Heiken_A script

#####################################################################################################
input charttype = ChartType.CANDLE;

def haopen_ = if haClose <= haOpen
              then haOpen + 0
             else Double.NaN;

def HAhi   = if haClose <= haOpen
              then haHigh
              else Double.NaN;

def HAlo =   if haClose <= haOpen
              then haLow
              else Double.NaN;


AddChart(growColor = Color.RED, neutralColor = Color.CURRENT, high = HAhi, low = HAlo, open = haopen_, close = haClose, type = ChartType.CANDLE);

def HAclose1 = ohlc4;
def HAopen1  = if haClose >= haOpen
               then CompoundValue(1, (haOpen[1] + haClose[1]) / 2, (open[1] + close[1]) / 2)  
               else Double.NaN;

def haopen_1 = if haOpen <= haClose
               then HAopen1 + 0  else Double.NaN;

def HAhigh1  = haHigh;
def HAlow1   = haLow;


AddChart(growColor = Color.GREEN, neutralColor = Color.CURRENT,  high = HAhigh1, low = HAlow1, open = haopen_1, close = haClose, type = ChartType.CANDLE);

#####################################################################################################
#Buy and sell signals
def trend =  haClose >= haOpen;
def trendup = trend and !trend[1];
def trendd =  haClose < haOpen;
def trendDown = trendd and !trendd[1];

AddChartBubble(bubbles and trendup and trendup, HAlow1, ("Reversal:"    + round(HAlow1, 2)), Color.GREEN, no);

AddChartBubble(bubbles and trendDown and trendDown, HAhigh1, ("Reversal:"  + round(HAhigh1,2)), Color.LIGHT_RED, yes);

#Alerts
input alerts = yes;
def bull = if haClose > 0 and haopen[1] <= 0 then 1 else 0;
def bear = if haclose < 0 and haopen[1] >= 0 then 1 else 0;
Alert(alerts and trendup[1] == 1, "Up   ", Alert.BAR, Sound.Chimes);
Alert(alerts and trendDown[1] == 1, "Down ", Alert.BAR, Sound.Bell);

#Arrows instead of bubbles
#def trend = haClose >= haOpen ;
#plot trendup = trend and !trend[1];
#trendup.SetPaintingStrategy(PaintingStrategy.BOOLEAN_ARROW_UP);
#trendup.SetDefaultColor(Color.CYAN);


#def trendd = haClose <= haOpen ;
#plot trendDown = trendd and !trendd[1];
#trendDown.SetDefaultColor(Color.MAGENTA);
#trendDown.SetPaintingStrategy(PaintingStrategy.BOOLEAN_ARROW_DOWN);
 
Picard said:
Ok. I made the Trend_Reversal_Scanner Alert, but I need it to repeat for every buy signal. Does anyone know how to do that?

http://tos.mx/sZoZpVF
Click to expand...
I use this one all the time. If I'm watching a certain ticker but want to watch/look at others, I simply open a multiscreen with the symbol in it and surf on the other screen the alert will still popup for all you have open with the indicator on. I use this in as short as 1 minute time frame. But I only play certain symbols/well known symbols. for example AAL AMC AMD DAL JBLU JETS NKE PEP KO SPXL TQQQ TSLA T TAN UBER LYFT AAPL SNAP SPY /MES QQQ. I want to learn how to convert this to Trade Station to auto trade with it. You still have to know the basics and understand trend direction but you can make consistent money with it, even on just a few stocks. I didn't make this I just added sound. But I hope it helps you out.

Code: 
# Trend Reversal Scanner
# Scanner by [URL]https://usethinkscript.com/u/theelderwand[/URL]
# Discuss [URL]https://usethinkscript.com/d/183-trend-reversal-indicator-with-signals-for-thinkorswim[/URL]

def price = close;
def superfast_length = 9;
def fast_length = 14;
def slow_length = 21;
def displace = 0;

def mov_avg9 = ExpAverage(price[-displace], superfast_length);
def mov_avg14 = ExpAverage(price[-displace], fast_length);
def mov_avg21 = ExpAverage(price[-displace], slow_length);

#moving averages
def Superfast = mov_avg9;
def Fast = mov_avg14;
def Slow = mov_avg21;

def buy = mov_avg9 > mov_avg14 and mov_avg14 > mov_avg21 and low > mov_avg9;
def stopbuy = mov_avg9 <= mov_avg14;
def buynow = !buy[1] and buy;
def buysignal = CompoundValue(1, if buynow and !stopbuy then 1 else if buysignal[1] == 1 and stopbuy then 0 else buysignal[1], 0);

def Buy_Signal = buysignal[1] == 0 and buysignal == 1;
def Momentum_Down = buysignal[1] == 1 and buysignal == 0;

def sell = mov_avg9 < mov_avg14 and mov_avg14 < mov_avg21 and high < mov_avg9;
def stopsell = mov_avg9 >= mov_avg14;
def sellnow = !sell[1] and sell;
def sellsignal = CompoundValue(1, if sellnow and !stopsell then 1 else if sellsignal[1] == 1 and stopsell then 0 else sellsignal[1], 0);
def Sell_Signal = sellsignal[1] == 0 and sellsignal;


input method = {default average, high_low};
def bubbleoffset = .0005;
def percentamount = .01;
def revAmount = .05;
def atrreversal = 2.0;
def atrlength = 5;
def pricehigh = high;
def pricelow = low;
def averagelength = 5;
def averagetype = AverageType.EXPONENTIAL;
def mah = MovingAverage(averagetype, pricehigh, averagelength);
def mal = MovingAverage(averagetype, pricelow, averagelength);
def priceh = if method == method.high_low then pricehigh else mah;
def pricel = if method == method.high_low then pricelow else mal;
def EI = ZigZagHighLow("price h" = priceh, "price l" = pricel, "percentage reversal" = percentamount, "absolute reversal" = revAmount, "atr length" = atrlength, "atr reversal" = atrreversal);
rec EISave = if !IsNaN(EI) then EI else GetValue(EISave, 1);
def chg = (if EISave == priceh then priceh else pricel) - GetValue(EISave, 1);
def isUp = chg >= 0;
def EIL = if !IsNaN(EI) and !isUp then pricel else GetValue(EIL, 1);
def EIH = if !IsNaN(EI) and isUp then priceh else GetValue(EIH, 1);
def dir = CompoundValue(1, if EIL != EIL[1] or pricel == EIL[1] and pricel == EISave then 1 else if EIH != EIH[1] or priceh == EIH[1] and priceh == EISave then -1 else dir[1], 0);
def signal = CompoundValue(1, if dir > 0 and pricel > EIL then if signal[1] <= 0 then 1 else signal[1] else if dir < 0 and priceh < EIH then if signal[1] >= 0 then -1 else signal[1] else signal[1], 0);

def bullish2 = signal > 0 and signal[1] <= 0;
plot upArrow = bullish2;
upArrow.SetPaintingStrategy(PaintingStrategy.BOOLEAN_ARROW_UP);
upArrow.SetDefaultColor(CreateColor(145, 210, 144));

def bearish2 = signal < 0 and signal[1] >= 0;
plot downArrow = bearish2;
downArrow.SetPaintingStrategy(PaintingStrategy.BOOLEAN_ARROW_DOWN);
downArrow.SetDefaultColor(CreateColor(255, 15, 10));

#Alerts
input alerts = yes;
def bull = if signal > 0 and signal[1] <= 0 then 1 else 0;
def bear = if signal < 0 and signal[1] >= 0 then 1 else 0;
Alert(alerts and bullish2[1] == 1, "Up   ", Alert.BAR, Sound.Chimes);
Alert(alerts and bearish2[1] == 1, "Down ", Alert.BAR, Sound.Bell);
 
@BenTen I need help with the if condition on this indicator.

Code: 
if showPriceBubble == 1 then
{
AddChartBubble((barnumber and U1), if isUp then low else high, if showarrows and signal > 0 and signal[1] <= 0 then "Reversal:" + low else "" , if Colorbars == 3 then Color.PLUM else Color.UPTICK, no);
AddChartBubble((barnumber and D1), if isUp then low else high, if showarrows and signal < 0 and signal[1] >= 0 then "Reversal:" + high else "" , if Colorbars == 3 then Color.PLUM else Color.DOWNTICK, yes);
}

I have set input showPriceBubble = 1

I am getting a syntax error with the if condition. What am I doing wrong here?
 
@graci117 Here's an example:

Code: 
input bubbles = yes;
AddChartBubble(bubbles and signal, low, "example text", Color.light_green, no);
 
Hi everyone, just started using this indicator (the script on the first post) and I'm amazed at its accuracy. It's really helped me take a more cautious approach to my trading.

Id like to add a simple sound effect when either a green or red bubble pop up. It would be great if the sounds were different for each color. Any idea how I can go about that? I'm not a pro when it comes to thinkscript but I'm not totally unfamiliar when it comes to basic coding.

Thanks!
 
@tnil
  • You can read these guidelines of how to find the posts in this thread that talk about alerts. This simple trick will allow you to skip reading all 71 pages and let you just read the posts about how to write alerts for this indicator.
  • This is a repainting indicator so its "amazing accuracy" is not really amazing. Go to this post to find out more.
  • Lastly, the post about the basics of a good strategy might be of interest.
HTH
 
MerryDay said:
@tnil
  • You can read these guidelines of how to find the posts in this thread that talk about alerts. This simple trick will allow you to skip reading all 71 pages and let you just read the posts about how to write alerts for this indicator.
  • This is a repainting indicator so its "amazing accuracy" is not really amazing. Go to this post to find out more.
  • Lastly, the post about the basics of a good strategy might be of interest.
HTH
Click to expand...
@MerryDay Thanks for the heads up. I did indeed find what I was looking for using the search.

And of course Ill be cautious using this script, I was just comparing it to other trend reversal indicators I experimented with. I always refer to my RSI and 30 day hourly chart before making any commitments. This is just a nice addition.
 
BenTen said:
Someone shared this indicator via a thread on Futures forum. I don't know the original name so I called it the reversal indicator. It uses moving averages, ZigZag pattern, and Fibonacci to generate reversal signals on your chart.

One thing to note is that this indicator will repaint. The Buy and Sell signal will disappear if the candlestick closed above or below the stop loss line. You can use that as a trigger point to cut losses early if that happens.

  • Green = Buy Signal Bars
  • Purple = Neutral
  • Red = Sell Signal Bars

42bpQGm.png


thinkScript Code

Rich (BB code): 
def price = close;
def superfast_length = 9;
def fast_length = 14;
def slow_length = 21;
def displace = 0;

def mov_avg9 = ExpAverage(price[-displace], superfast_length);
def mov_avg14 = ExpAverage(price[-displace], fast_length);
def mov_avg21 = ExpAverage(price[-displace], slow_length);

#moving averages
def Superfast = mov_avg9;
def Fast = mov_avg14;
def Slow = mov_avg21;

def buy = mov_avg9 > mov_avg14 and mov_avg14 > mov_avg21 and low > mov_avg9;
def stopbuy = mov_avg9 <= mov_avg14;
def buynow = !buy[1] and buy;
def buysignal = CompoundValue(1, if buynow and !stopbuy then 1 else if buysignal[1] == 1 and stopbuy then 0 else buysignal[1], 0);

def Buy_Signal = buysignal[1] == 0 and buysignal == 1;

#Alert(condition = buysignal[1] == 0 and buysignal == 1, text = "Buy Signal", sound = Sound.Bell, "alert type" = Alert.BAR);

def Momentum_Down = buysignal[1] == 1 and buysignal == 0;

#Alert(condition = buysignal[1] == 1 and buysignal == 0, text = "Momentum_Down", sound = Sound.Bell, "alert type" = Alert.BAR);

def sell = mov_avg9 < mov_avg14 and mov_avg14 < mov_avg21 and high < mov_avg9;
def stopsell = mov_avg9 >= mov_avg14;
def sellnow = !sell[1] and sell;
def sellsignal = CompoundValue(1, if sellnow and !stopsell then 1 else if sellsignal[1] == 1 and stopsell then 0 else sellsignal[1], 0);

def Sell_Signal = sellsignal[1] == 0 and sellsignal;

#Alert(condition = sellsignal[1] == 0 and sellsignal == 1, text = "Sell Signal", sound = Sound.Bell, "alert type" = Alert.BAR);

def Momentum_Up = sellsignal[1] == 1 and sellsignal == 0;

#Alert(condition = sellsignal[1] == 1 and sellSignal == 0, text = "Momentum_Up", sound = Sound.Bell, "alert type" = Alert.BAR);

plot Colorbars = if buysignal == 1 then 1 else if sellsignal == 1 then 2 else if buysignal == 0 or sellsignal == 0 then 3 else 0;
Colorbars.Hide();
Colorbars.DefineColor("Buy_Signal_Bars", Color.GREEN);
Colorbars.DefineColor("Sell_Signal_Bars", Color.RED);
Colorbars.DefineColor("Neutral", Color.PLUM);
#___________________________________________________________________________

input method = {default average, high_low};
def bubbleoffset = .0005;
def percentamount = .01;
def revAmount = .05;
def atrreversal = 2.0;
def atrlength = 5;
def pricehigh = high;
def pricelow = low;
def averagelength = 5;
def averagetype = AverageType.EXPONENTIAL;
def mah = MovingAverage(averagetype, pricehigh, averagelength);
def mal = MovingAverage(averagetype, pricelow, averagelength);
def priceh = if method == method.high_low then pricehigh else mah;
def pricel = if method == method.high_low then pricelow else mal;
def EI = ZigZagHighLow("price h" = priceh, "price l" = pricel, "percentage reversal" = percentamount, "absolute reversal" = revAmount, "atr length" = atrlength, "atr reversal" = atrreversal);
def reversalAmount = if (close * percentamount / 100) > Max(revAmount < atrreversal * reference ATR(atrlength), revAmount) then (close * percentamount / 100) else if revAmount < atrreversal * reference ATR(atrlength) then atrreversal * reference ATR(atrlength) else revAmount;
rec EISave = if !IsNaN(EI) then EI else GetValue(EISave, 1);
def chg = (if EISave == priceh then priceh else pricel) - GetValue(EISave, 1);
def isUp = chg >= 0;
rec isConf = AbsValue(chg) >= reversalAmount or (IsNaN(GetValue(EI, 1)) and GetValue(isConf, 1));
def EId = if isUp then 1 else 0;
#plot EnhancedLines = if EId <= 1 then EI else Double.NaN;
#EnhancedLines.AssignValueColor(if EId == 1 then Color.GREEN else if EId == 0 then Color.RED else Color.DARK_ORANGE);
#EnhancedLines.SetStyle(Curve.FIRM);
#EnhancedLines.EnableApproximation();
#EnhancedLines.HideBubble();
#Price Change between Enhanceds
def xxhigh = if EISave == priceh then priceh else xxhigh[1];
def chghigh = priceh - xxhigh[1];
def xxlow = if EISave == pricel then pricel else xxlow[1];
def chglow = pricel - xxlow[1];
def showBubbleschange = no;
AddChartBubble(showBubbleschange and !IsNaN(EI) and BarNumber() != 1, if isUp then priceh * (1 + bubbleoffset) else pricel * (1 - bubbleoffset) , "$" + chg , if isUp and chghigh > 0 then Color.GREEN else if isUp and chghigh < 0 then Color.RED else if isUp then Color.YELLOW else if !isUp and chglow > 0 then Color.GREEN else if !isUp and chglow < 0 then Color.RED else Color.YELLOW, isUp);
#Price at High/Low
def showBubblesprice = no;
AddChartBubble(showBubblesprice and !IsNaN(EI) and BarNumber() != 1, if isUp then priceh * (1 + bubbleoffset) else pricel * (1 - bubbleoffset) , if isUp then "$" + priceh else "$" + pricel , if isUp and chghigh > 0 then Color.GREEN else if isUp and chghigh < 0 then Color.RED else if isUp then Color.YELLOW else if !isUp and chglow > 0 then Color.GREEN else if !isUp and chglow < 0 then Color.RED else Color.YELLOW, isUp);
#Label for Confirmed/Unconfirmed Status of Current Enhanced

#Bar Count between Enhanceds
rec EIcount = if EISave[1] != EISave then 1 else if EISave[1] == EISave then EIcount[1] + 1 else 0;
def EIcounthilo = if EIcounthilo[1] == 0 and (EISave == priceh or EISave == pricel) then 1 else if EISave == priceh or EISave == pricel then EIcounthilo[1] + 1 else EIcounthilo[1];
def EIhilo = if EISave == priceh or EISave == pricel then EIcounthilo else EIcounthilo + 1;
def EIcounthigh = if EISave == priceh then EIcount[1] else Double.NaN;
def EIcountlow = if EISave == pricel then EIcount[1] else Double.NaN;
def showBubblesbarcount = no;
AddChartBubble(showBubblesbarcount and !IsNaN(EI) and BarNumber() != 1, if isUp then priceh * (1 + bubbleoffset) else pricel * (1 - bubbleoffset) , if EISave == priceh then EIcounthigh else EIcountlow, if isUp and chghigh > 0 then Color.GREEN else if isUp and chghigh < 0 then Color.RED else if isUp then Color.YELLOW else if !isUp and chglow > 0 then Color.GREEN else if !isUp and chglow < 0 then Color.RED else Color.YELLOW, if isUp then yes else no );
#Arrows
def EIL = if !IsNaN(EI) and !isUp then pricel else GetValue(EIL, 1);
def EIH = if !IsNaN(EI) and isUp then priceh else GetValue(EIH, 1);
def dir = CompoundValue(1, if EIL != EIL[1] or pricel == EIL[1] and pricel == EISave then 1 else if EIH != EIH[1] or priceh == EIH[1] and priceh == EISave then -1 else dir[1], 0);
def signal = CompoundValue(1, if dir > 0 and pricel > EIL then if signal[1] <= 0 then 1 else signal[1] else if dir < 0 and priceh < EIH then if signal[1] >= 0 then -1 else signal[1] else signal[1], 0);
def showarrows = yes;
def U1 = showarrows and signal > 0 and signal[1] <= 0;
#U1.SetPaintingStrategy(PaintingStrategy.BOOLEAN_ARROW_UP);
#U1.SetDefaultColor(Color.GREEN);
#U1.SetLineWeight(4);
def D1 = showarrows and signal < 0 and signal[1] >= 0;
#D1.SetPaintingStrategy(PaintingStrategy.BOOLEAN_ARROW_DOWN);
#D1.SetDefaultColor(Color.RED);
#D1.SetLineWeight(4);
def barnumber = BarNumber()[10];

AddChartBubble((barnumber and U1), if isUp then low else high, if showarrows and signal > 0 and signal[1] <= 0 then "Reversal:" + low else "" , if Colorbars == 3 then Color.PLUM else Color.UPTICK, no);
AddChartBubble((barnumber and D1), if isUp then low else high, if showarrows and signal < 0 and signal[1] >= 0 then "Reversal:" + high else "" , if Colorbars == 3 then Color.PLUM else Color.DOWNTICK, yes);

def revLineTop;
def revLineBot;

if barnumber and D1 {
revLineBot = Double.NaN;
revLineTop = high[1];
} else if barnumber and U1 {
revLineTop = Double.NaN;
revLineBot = low[1];
} else if !IsNaN(revLineBot[1]) and (Colorbars[2] == 2 or Colorbars[1] == 2) {
revLineBot = revLineBot[1];
revLineTop = Double.NaN;
} else if !IsNaN(revLineTop[1]) and (Colorbars[2] == 1 or Colorbars[1] == 1) {
revLineTop = revLineTop[1];
revLineBot = Double.NaN;
} else {
revLineTop = Double.NaN;
revLineBot = Double.NaN;
}

plot botLine = revLineBot[-1];
botLine.SetDefaultColor(Color.LIGHT_GREEN);
plot topLine = revLineTop[-1];
topLine.SetDefaultColor(Color.LIGHT_RED);

#Alerts
def usealerts = no;
#Alert(usealerts and U1, "EI-UP", Alert.BAR, Sound.Bell);
#Alert(usealerts and D1, "EI-DOWN", Alert.BAR, Sound.Chimes);
#Supply Demand Areas
rec data1 = CompoundValue(1, if (EISave == priceh or EISave == pricel) then data1[1] + 1 else data1[1], 0);
def datacount1 = (HighestAll(data1) - data1[1]);
def numbersuppdemandtoshow = 0;
input showSupplyDemand = {default Pivot, Arrow, None};
def idx = if showSupplyDemand == showSupplyDemand.Pivot then 1 else 0;
def rLow;
def rHigh;
if signal crosses 0 {
rLow = pricel[idx];
rHigh = priceh[idx];
} else {
rLow = rLow[1];
rHigh = rHigh[1];
}
def HighLine = if datacount1 <= numbersuppdemandtoshow and showSupplyDemand != showSupplyDemand.None and !IsNaN(close) and rHigh != 0 then rHigh else Double.NaN;

def LowLine = if datacount1 <= numbersuppdemandtoshow and showSupplyDemand != showSupplyDemand.None and !IsNaN(close) and rLow != 0 then rLow else Double.NaN;

def hlUp = if signal > 0 then HighLine else Double.NaN;
def hlDn = if signal < 0 then HighLine else Double.NaN;

def showsupplydemandcloud = no;
AddCloud(if showsupplydemandcloud then hlUp else Double.NaN, LowLine, Color.LIGHT_GREEN, Color.LIGHT_GREEN);
AddCloud(if showsupplydemandcloud then hlDn else Double.NaN, LowLine, Color.LIGHT_RED, Color.LIGHT_RED);
#Store Previous Data
def EIsave1 = if !IsNaN(EISave) then EISave else EIsave1[1];
def EIsave2 = EIsave1;
rec priorEI1 = if EIsave2 != EIsave2[1] then EIsave2[1] else priorEI1[1];
rec priorEI2 = if priorEI1 != priorEI1[1] then priorEI1[1] else priorEI2[1];
rec priorEI3 = if priorEI2 != priorEI2[1] then priorEI2[1] else priorEI3[1];
#Fibonacci Extensions
rec data = CompoundValue(1, if (EISave == priceh or EISave == pricel) then data[1] + 1 else data[1], 0);
def datacount = (HighestAll(data) - data[1]);
def numberextfibstoshow = 2;
rec cpo = if dir[1] != dir then 0 else 1;
def showFibExtLines = no;
def showtodayonly = no;
def today = if showtodayonly == yes then GetDay() == GetLastDay() else GetDay();
def extfib1 = if EISave == priceh then priceh - AbsValue(priorEI2 - priorEI1) * 1
else extfib1[1];
def extfib100 = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib1) and dir < 0 and cpo != 0 then extfib1[1] else Double.NaN;

def extfib1a = if EISave == priceh then priceh - AbsValue(priorEI2 - priorEI1) * 0.382
else extfib1a[1];
def extfib382 = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib1a) and dir < 0 and cpo != 0 then extfib1a[1] else Double.NaN;

def extfib2 = if EISave == priceh then priceh - AbsValue(priorEI2 - priorEI1) *
0.618 else extfib2[1];
def extfib618 = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib2) and dir < 0 and cpo != 0 then extfib2[1] else Double.NaN;

def extfib3 = if EISave == priceh then priceh - AbsValue(priorEI2 - priorEI1) *
1.618 else extfib3[1];
def extfib1618 = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib3) and dir < 0 and cpo != 0 then extfib3[1] else Double.NaN;

def extfib3a = if EISave == priceh then priceh - AbsValue(priorEI2 - priorEI1) *
2.000 else extfib3a[1];
def extfib2000 = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib3a) and dir < 0 and cpo != 0 then extfib3a[1] else Double.NaN;

def extfib4 = if EISave == priceh then priceh - AbsValue(priorEI2 - priorEI1) *
2.618 else extfib4[1];
def extfib2618 = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib4) and dir < 0 and cpo != 0 then extfib4[1] else Double.NaN;

def extfib5 = if EISave == priceh then priceh - AbsValue(priorEI2 - priorEI1) *
3.618 else extfib5[1];
def extfib3618 = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib5) and dir < 0 and cpo != 0 then extfib5[1] else Double.NaN;

def extfib1_ = if EISave == pricel then pricel + AbsValue(priorEI2 - priorEI1) * 1
else extfib1_[1];
def extfib100_ = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib1_) and dir > 0 and cpo != 0 then extfib1_[1] else Double.NaN;

def extfib1a_ = if EISave == pricel then pricel + AbsValue(priorEI2 - priorEI1) * 0.382
else extfib1a_[1];
def extfib382_ = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib1a_) and dir > 0 and cpo != 0 then extfib1a_[1] else Double.NaN;

def extfib2_ = if EISave == pricel then pricel + AbsValue(priorEI2 - priorEI1) *
0.618 else extfib2_[1];
def extfib618_ = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib2_) and dir > 0 and cpo != 0 then extfib2_[1] else Double.NaN;

def extfib3_ = if EISave == pricel then pricel + AbsValue(priorEI2 - priorEI1) *
1.618 else extfib3_[1];
def extfib1618_ = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib3_) and dir > 0 and cpo != 0 then extfib3_[1] else Double.NaN;

def extfib3a_ = if EISave == pricel then pricel + AbsValue(priorEI2 - priorEI1) *
2.000 else extfib3a_[1];
def extfib2000_ = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib3a_) and dir > 0 and cpo != 0 then extfib3a_[1] else Double.NaN;

def extfib4_ = if EISave == pricel then pricel + AbsValue(priorEI2 - priorEI1) *
2.618 else extfib4_[1];
def extfib2618_ = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib4_) and dir > 0 and cpo != 0 then extfib4_[1] else Double.NaN;

def extfib5_ = if EISave == pricel then pricel + AbsValue(priorEI2 - priorEI1) *
3.618 else extfib5_[1];
def extfib3618_ = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib5_) and dir > 0 and cpo != 0 then extfib5_[1] else Double.NaN;

def fibextbubblespacesinexpansion = 8;
def b = fibextbubblespacesinexpansion;
def direction = if !isUp then 1 else 0;
AddChartBubble( direction[b + 1] == 1 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib1[b + 2], "100%", Color.RED, no);
AddChartBubble( direction[b + 1] == 1 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib1a[b + 2], "38.2%", Color.RED, no);
AddChartBubble( direction[b + 1] == 1 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib2[b + 2], "61.8%", Color.RED, no);
AddChartBubble( direction[b + 1] == 1 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib3[b + 2], "161.8%", Color.RED, no);
AddChartBubble( direction[b + 1] == 1 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib3a[b + 2], "200%", Color.RED, no);
AddChartBubble( direction[b + 1] == 1 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib4[b + 2], "261.8%", Color.RED, no);
AddChartBubble( direction[b + 1] == 1 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib5[b + 2], "361.8%", Color.RED, no);
AddChartBubble( direction[b + 1] == 0 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib1_[b + 2], "100%", Color.GREEN, yes);
AddChartBubble( direction[b + 1] == 0 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib1a_[b + 2], "38.2%", Color.GREEN, yes);
AddChartBubble( direction[b + 1] == 0 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib2_[b + 2], "61.8%", Color.GREEN, yes);
AddChartBubble( direction[b + 1] == 0 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib3_[b + 2], "161.8%", Color.GREEN, yes);
AddChartBubble( direction[b + 1] == 0 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib3a_[b + 2], "200%", Color.GREEN, yes);
AddChartBubble( direction[b + 1] == 0 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib4_[b + 2], "261.8%", Color.GREEN, yes);
AddChartBubble( direction[b + 1] == 0 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib5_[b + 2], "361.8%", Color.GREEN, yes);
#Volume at Reversals
def vol = if BarNumber() == 0 then 0 else volume + vol[1];
def vol1 = if BarNumber() == 1 then volume else vol1[1];
def xxvol = if EISave == priceh or EISave == pricel then TotalSum(volume) else xxvol[1];
def chgvol = if xxvol - xxvol[1] + vol1 == vol then vol else xxvol - xxvol[1];
def showBubblesVolume = no;
AddChartBubble(showBubblesVolume and !IsNaN(EI) and BarNumber() != 1, if isUp then priceh * (1 + bubbleoffset) else pricel * (1 - bubbleoffset), chgvol, if isUp and chghigh > 0 then Color.GREEN else if isUp and chghigh < 0 then Color.RED else if isUp then Color.YELLOW else if !isUp and chglow > 0 then Color.GREEN else if !isUp and chglow < 0 then Color.RED else Color.YELLOW, if isUp then yes else no );

input usemanualfibskip = no;#Hint usemanualfibskip: Select no to use preprogrammed fibskip amounts. Select no, to use the amount entered at input fibskip.
input fibskip = .50;#Hint fibskip: Set input usemanualfibskip == yes to use this amount versus preprogrammed amounts. Standard is 1.0. This is percentage difference between fib high and low before a new fib grid created.
def showBubblesfibratio = no;
def showFibLabel = no;#Hint showfibLabel: Select yes to show label of current fib level as of last price
def showfiblines = no;
def fib1level = .236;
def fib2level = .382;
def fibMlevel = .500;
def fib3level = .618;
def fib4level = .786;
#Fibs
def datacount2 = (HighestAll(data1) - data1[1]);
def numberfibretracementstoshow = 2;
def fibskipit = if usemanualfibskip == no then if close > 800 then .25 else .5 else fibskip;
def EIfibh = if EISave == priceh and AbsValue(EISave - EISave[1]) > priceh * fibskipit * .01 then priceh else EIfibh[1];
def EIfibl = if EISave == pricel and AbsValue(EISave - EISave[1]) > priceh * fibskipit * .01 then pricel else EIfibl[1];
def range = EIfibh - EIfibl;
def fibH = if showfiblines == no then Double.NaN else if datacount2 <= numberfibretracementstoshow then EIfibh else Double.NaN;
def fibL = if showfiblines == no then Double.NaN else if datacount2 <= numberfibretracementstoshow then EIfibl else Double.NaN;
def fibM = if showfiblines == no then Double.NaN else if datacount2 <= numberfibretracementstoshow then EIfibl + range * fibMlevel else Double.NaN;
def fib1 = if showfiblines == no then Double.NaN else if datacount2 <= numberfibretracementstoshow then EIfibl + range * fib1level else Double.NaN;
def fib2 = if showfiblines == no then Double.NaN else if datacount2 <= numberfibretracementstoshow then EIfibl + range * fib2level else Double.NaN;
def fib3 = if showfiblines == no then Double.NaN else if datacount2 <= numberfibretracementstoshow then EIfibl + range * fib3level else Double.NaN;
def fib4 = if showfiblines == no then Double.NaN else if datacount2 <= numberfibretracementstoshow then EIfibl + range * fib4level else Double.NaN;

AddLabel(showFibLabel, Concat( "Current Fib Level ", AsPercent((close - EIfibl) / (range))), if close > EIfibl then Color.GREEN else if EIfibh == close then Color.WHITE else Color.RED);

AddChartBubble(showBubblesfibratio and !IsNaN(EI) and BarNumber() != 1, if isUp then priceh * (1 + bubbleoffset) else pricel * (1 - bubbleoffset) , if isUp then AsPercent((priceh - EIfibl) / (range)) else AsPercent((pricel - EIfibl) / range), if isUp and chghigh > 0 then Color.GREEN else if isUp and chghigh < 0 then Color.RED else if isUp then Color.GREEN else if !isUp and chglow > 0 then Color.GREEN else if !isUp and chglow < 0 then Color.RED else Color.RED, isUp);

Shareable Link

https://tos.mx/aGoeQ4

Credit:

Scanner

If you would like to scan for new signals, be it on the daily, hourly, or 15m chart, here is the scanner for it. Made by @theelderwand

The Enhanced Version

Added some additional features to the default script above. You can check out the enhanced trend reversal indicator here.

Video Tutorial

Click to expand...
Hello: It's an excellent indicator. Thank you for sharing it. Curious if a sound alert could be added when the Lable condition changes from Green to red and vice versa?Thanks
 
MKToronto said:
Hello: It's an excellent indicator. Thank you for sharing it. Curious if a sound alert could be added when the Lable condition changes from Green to red and vice versa?Thanks
Click to expand...

There's quite a few solutions on this thread but a lot of them either didn't work or the alert lagged. I found this code on page 66 to do exactly what I wanted - fire off an alert once a bubble pops up.

Rich (BB code): 
#Alerts
input alerts = yes;
def bullish2 = if signal > 0 and signal[1] <= 0 then 1 else 0;
def bearish2 = if signal < 0 and signal[1] >= 0 then 1 else 0;
Alert(alerts and bullish2[1] == 1, "Up   ", Alert.BAR, Sound.Chimes);
Alert(alerts and bearish2[1] == 1, "Down ", Alert.BAR, Sound.Bell);

Btw, not stepping on your toes @MerryDay. Just sharing the solution I found works best. Perhaps Ben could share this code snippet on the first post?
 
tnil25 said:
There's quite a few solutions on this thread but a lot of them either didn't work or the alert lagged. I found this code on page 66 to do exactly what I wanted - fire off an alert once a bubble pops up.

Rich (BB code): 
#Alerts
input alerts = yes;
def bullish2 = if signal > 0 and signal[1] <= 0 then 1 else 0;
def bearish2 = if signal < 0 and signal[1] >= 0 then 1 else 0;
Alert(alerts and bullish2[1] == 1, "Up   ", Alert.BAR, Sound.Chimes);
Alert(alerts and bearish2[1] == 1, "Down ", Alert.BAR, Sound.Bell);

Btw, not stepping on your toes @MerryDay. Just sharing the solution I found works best. Perhaps Ben could share this code snippet on the first post?
Click to expand...
Thank you very much. Your help is much appreciated. I am in fact looking for the code for Bubble when it changes from
tnil25 said:
There's quite a few solutions on this thread but a lot of them either didn't work or the alert lagged. I found this code on page 66 to do exactly what I wanted - fire off an alert once a bubble pops up.

Rich (BB code): 
#Alerts
input alerts = yes;
def bullish2 = if signal > 0 and signal[1] <= 0 then 1 else 0;
def bearish2 = if signal < 0 and signal[1] >= 0 then 1 else 0;
Alert(alerts and bullish2[1] == 1, "Up   ", Alert.BAR, Sound.Chimes);
Alert(alerts and bearish2[1] == 1, "Down ", Alert.BAR, Sound.Bell);

Btw, not stepping on your toes @MerryDay. Just sharing the solution I found works best. Perhaps Ben could share this code snippet on the first post?
Click to expand...
Thank you for your help. Much appreciated. In fact, I was meaning for an alert when the Bubble color changes from green to red and so on. Regards
 
MKToronto said:
Thank you very much. Your help is much appreciated. I am in fact looking for the code for Bubble when it changes from

Thank you for your help. Much appreciated. In fact, I was meaning for an alert when the Bubble color changes from green to red and so on. Regards
Click to expand...
That doesnt seem to be how this indicator works. If a green bubble gets stopped out it will just disappear and wont change to a red bubble until it confirms a downward trend. The code I posted will alert you whenever a buy or sell bubble pops up.
 
The below instructions were provided in post# 1387. For future reference, here is a hack for when you don't want to read all 71 pages of a post, just to find the scan, an alert, or a watchlist.

Click on the scanner.
  1. Click on +Add filter
  2. Click on the pencil icon next to the filter you just added
  3. Click edit
  4. In the left column, click on the 1st pull-down window, click study
  5. Type in whatever you named the shared study
  6. Under Plot, click on the pull-down window, choose upArrow
  7. In the middle column, choose is true
  8. Save
HTH
 
tnil25 said:
That doesnt seem to be how this indicator works. If a green bubble gets stopped out it will just disappear and wont change to a red bubble until it confirms a downward trend. The code I posted will alert you whenever a buy or sell bubble pops up.
Click to expand...
Fantastic!!! It's working the way I wanted... Tons of thanks for your kindness.
 
tnil25 said:
There's quite a few solutions on this thread but a lot of them either didn't work or the alert lagged. I found this code on page 66 to do exactly what I wanted - fire off an alert once a bubble pops up.

Rich (BB code): 
#Alerts
input alerts = yes;
def bullish2 = if signal > 0 and signal[1] <= 0 then 1 else 0;
def bearish2 = if signal < 0 and signal[1] >= 0 then 1 else 0;
Alert(alerts and bullish2[1] == 1, "Up   ", Alert.BAR, Sound.Chimes);
Alert(alerts and bearish2[1] == 1, "Down ", Alert.BAR, Sound.Bell);

Btw, not stepping on your toes @MerryDay. Just sharing the solution I found works best. Perhaps Ben could share this code snippet on the first post?
Click to expand...
Hello: May I ask for another help. Is there a way to show bid and ask size on a chart. The bid and ask Indicator is available but couldn't find a size indicator.
 
MKToronto said:
Hello: May I ask for another help. Is there a way to show bid and ask size on a chart. The bid and ask Indicator is available but couldn't find a size indicator.
Click to expand...

No... That data is not available via Thinkscript, only at the platform level...
 
Status
Not open for further replies.

BenTen's Watchlist + Setup + Trade Recaps

Get access to Ben's watchlist, swing trading strategy, ThinkorSwim setup, and trade examples.

Learn more

Thread starter Similar threads Forum Replies Date
BenTen Repaints Enhanced Trend Reversal Indicator for ThinkorSwim Indicators 122
BenTen Reversal Candles (Saikou / Hikui) Trend Change for ThinkorSwim Indicators 10
samer800 LNL Trend System for ThinkOrSwim Indicators 25
samer800 L3 Banker Fund Flow Trend Oscillator for ThinkOrSwim Indicators 31
samer800 Trend Meter For ThinkOrSwim Indicators 38

Similar threads

Not the exact question you're looking for?

Start a new thread and receive assistance from our community.

87k+ Posts
304 Online
Create Post

Similar threads

Similar threads

The Market Trading Game Changer

Join 2,500+ subscribers inside the useThinkScript VIP Membership Club
  • Exclusive indicators
  • Proven strategies & setups
  • Private Discord community
  • ‘Buy The Dip’ signal alerts
  • Exclusive members-only content
  • Add-ons and resources
  • 1 full year of unlimited support
Try VIP Club Today

Frequently Asked Questions

What is useThinkScript?

useThinkScript is the #1 community of stock market investors using indicators and other tools to power their trading strategies. Traders of all skill levels use our forums to learn about scripting and indicators, help each other, and discover new ways to gain an edge in the markets.

How do I get started?

We get it. Our forum can be intimidating, if not overwhelming. With thousands of topics, tens of thousands of posts, our community has created an incredibly deep knowledge base for stock traders. No one can ever exhaust every resource provided on our site.

If you are new, or just looking for guidance, here are some helpful links to get you started.

What are the benefits of VIP Membership?
VIP members get exclusive access to these proven and tested premium indicators: Buy the Dip, Advanced Market Moves 2.0, Take Profit, and Volatility Trading Range. In addition, VIP members get access to over 50 VIP-only custom indicators, add-ons, and strategies, private VIP-only forums, private Discord channel to discuss trades and strategies in real-time, customer support, trade alerts, and much more. Learn all about VIP membership here.
How can I access the premium indicators?
To access the premium indicators, which are plug and play ready, sign up for VIP membership here.
Back
Top