Repaints Trend Reversal for ThinkorSwim

[jjcc]

@jjcc Yup, it happens, especially with any repainting indicator like this one.

Is there anything that can be done? Seems to work when I change the look back time, but it's also hit or miss.

 

[rad14733]

Is there anything that can be done? Seems to work when I change the look back time, but it's also hit or miss.

The underlying issues with this indicator have been covered multiple times within this thread if you've take the time to read it in its entirety... Sometimes reducing the number of symbols in your watchlist helps... Having fewer Custom Watchlist Columns in your scan results sometimes helps... But finding a better indicator is the ultimate solution to the problem... People think this indicator is a panacea or the Holy Grail but it isn't once you understand its shortcomings... So, find a better indicator that doesn't repaint and isn't as complex and you'll have more reliable results...

 

[kganesh1]

@BenTen & Others - In my TOS the reversal alert/bubble always delay by 5 to 10 min, is this something I'm doing wrong. Any settings that you suggest to fix this?

 

[rad14733]

@BenTen & Others - In my TOS the reversal alert/bubble always delay by 5 to 10 min, is this something I'm doing wrong. Any settings that you suggest to fix this?

@kganesh1 At best, Custom Watchlist Columns only update every 3 - 7 minutes, so depending on your aggregation period timeframe it could be even longer... The best you can do to lessen the lag is to reduce your aggregation period timeframe for the Custom Watchlist Column... There is no true fix other than to use a Chart Alert which would be real-time, but at the expense of having to keep a chart open for each symbol... Does this help answer your question...???

 

[kganesh1]

@kganesh1 At best, Custom Watchlist Columns only update every 3 - 7 minutes, so depending on your aggregation period timeframe it could be even longer... The best you can do to lessen the lag is to reduce your aggregation period timeframe for the Custom Watchlist Column... There is no true fix other than to use a Chart Alert which would be real-time, but at the expense of having to keep a chart open for each symbol... Does this help answer your question...???

@rad14733, Thanks for your response, I'm facing this lag issue in the chart .i.e I'm using 5 min chart and i see a lag of 5 to 10 min which is strange. I agree with you on the watch list which I noticed in the forums. Please advise

 

[rad14733]

@rad14733, Thanks for your response, I'm facing this lag issue in the chart .i.e I'm using 5 min chart and i see a lag of 5 to 10 min which is strange. I agree with you on the watch list which I noticed in the forums. Please advise

There should be no lag for Chart Bubbles unless you are using the wrong indicator for the job... Some indicators intentionally lag in an effort to avoid or at least reduce repainting... That lag would also cause Chart Bubbles to lag... If you were to read all 73 pages of this topic you should be aware of the deficiencies this indicator possesses... I'd say it falls into the wrong tool for the job category...

 

[kganesh1]

There should be no lag for Chart Bubbles unless you are using the wrong indicator for the job... Some indicators intentionally lag in an effort to avoid or at least reduce repainting... That lag would also cause Chart Bubbles to lag... If you were to read all 73 pages of this topic you should be aware of the deficiencies this indicator possesses... I'd say it falls into the wrong tool for the job category...

@rad14733 , thanks for the note, let me closely monitor for few more days and see. Have a great day.

 

[GoldStriple]

I've never been able to get a price color to match indicators and surely not lined up with price action. Something was always off from price action, indicator lag.. etc.. perhaps it's my habit of watching price to much - but isn't that what I'm supposed to do! I've tried slim ribbons, even the macd line with various settings, BOP, SuperTrend CCI, even tried coding a Leledc price color, Also coded a RSM like cloud on BTD percentile with price color. again something was always off... perhaps the use of a neutral three color concept.. Until now - I add the code below to this Trend Reversal. I may have found a keeper.

apologies if someone already posted this.. I admit I didn't go through 73 pages!

screenshot doesn't reflect yesterday afternoons great swings.

AssignPriceColor(if isUp then GlobalColor("MyBlue")
else if !isUp then GlobalColor("MyYellow")
else color.current);

https://imgur.com/QeWOosH

 

[sunnybabu]

@BenTen is exactly right! The mega study that @RDMercer posted comprises many different components, notably some variant of what appears to be a Zig Zag High Low Supply Demand study that someone did 4-5 years ago, possibly more. That said, I took a quick look at the study, there are some notable and interesting portions.

The beginning section of the code is some sort of a moving average alignment study, what I have done is to extract the logic and crafted what I'd call a moving average alignment study with bullish and bearish undertones. Candles on the chart would be colored green if there is a bullish state, red if bearish state and yellow if neutral. Also included alerts for state transitions. As this is a complete revamp, I have used internal variables names of my choice to better represent the underlying price action

Enjoy this folks!

# Moving Average Alignment
# tomsk
# 11.15.2019

# Extracted idea from RDMercer's post #369 of the following thread
# https://usethinkscript.com/threads/trend-reversal-indicator-with-signals-for-thinkorswim.183/page-19

def price = close;
def length1 = 9;
def length2 = 14;
def length3 = 21;
def displace = 0;

def MA1 = ExpAverage(price[-displace], length1);
def MA2 = ExpAverage(price[-displace], length2);
def MA3 = ExpAverage(price[-displace], length3);

def BullishAlignment = MA1 > MA2 and MA2 > MA3 and low > MA1;
def BullBrakes = MA1 <= MA2;
def buysignal = CompoundValue(1, if !BullishAlignment[1] and BullishAlignment and !BullBrakes then 1
                                 else if buysignal[1] and BullBrakes then 0
                                 else buysignal[1], 0);
def Buy_Signal = !buysignal[1] and buysignal;

def BearishAlignment = MA1 < MA2 and MA2 < MA3 and high < MA1;
def BearBrakes = MA1 >= MA2;
def sellsignal = CompoundValue(1, if !BearishAlignment[1] and BearishAlignment and !BearBrakes then 1
                                  else if sellsignal[1] and BearBrakes then 0
                                  else sellsignal[1], 0);
def Sell_Signal = !sellsignal[1] and sellsignal;

def Momentum_Down = buysignal[1] and !buysignal;
def Momentum_Up   = sellsignal[1] and !sellsignal;

Alert(Buy_Signal, "Buy Signal", Alert.BAR, Sound.Ding);
Alert(Sell_Signal, "Sell Signal", Alert.BAR, Sound.Ring);
Alert(Momentum_Up, "Momentum_Up", Alert.BAR, Sound.Ding);
Alert(Momentum_Down, "Momentum_Down", Alert.BAR, Sound.Ring);

def State = if buysignal then 1 else if sellsignal then 2 else if !buysignal or !sellsignal then 3 else 0;
DefineGlobalColor("Buy Signal Bars", Color.GREEN);
DefineGlobalColor("Sell Signal Bars", Color.RED);
DefineGlobalColor("Neutral Bars", Color.YELLOW);
AssignPriceColor(if State == 1 then GlobalColor("Buy Signal Bars")
                       else if State == 2 then GlobalColor("Sell Signal Bars")
                       else GlobalColor("Neutral Bars"));

# End Moving Average Alignment

Hey @tomsk this indicator doesnt repaint correct? Also i'm in the middle of developing a python BOT as such trying to understand for the equivalent of "CompoundValue" in Python ? Appreciate your input.

https://tlc.thinkorswim.com/center/reference/thinkScript/Functions/Others/CompoundValue

 

[s1111]

@BenTen I have a quick question. How do I remove price after reversal on chat bubble? I was able to change reversal to Buy/Sell but I don't know what I have to remove so the price won't show. Any help is much appreciated. Thanks!!

 

[MerryDay]

@sunnybabu How could you miss that there are over 100 posts in this thread that discusses that this indicator is notorious for repainting?

 

[GoldStriple]

ha @MerryDay - respectfully - I love this indicator - and I don't fully agree it re-paints. it corrects itself sure - like today - there was a green Reversal but only for 2-4 candles as price was bouncing under the 34 ema and then sure enough went away. I find it only 're-paints' in little mini counter trend bounces.. which is super obvious it's about to do and the rest of the time it's very spot on. What I found today as well.. is live candle (ie no bubble) will turn my price color - that the very least gives me indication it's reached a potential reversal.

 

[GoldStriple]

@BenTen I have a quick question. How do I remove price after reversal on chat bubble? I was able to change reversal to Buy/Sell but I don't know what I have to remove so the price won't show. Any help is much appreciated. Thanks!!

copy study to a proper text editor - ie notepad++, TextPad, even primalscript..etc. Find "Reversal" which should be on the AddChartBubble Line and then remove "+low" and the "+ high"

then overwrite study with mods

 

[MerryDay]

@GoldStriple You stated: it only 're-paints' in little mini counter-trends... so you agree it repaints. @sunnybabu is looking to write a python bot which is not going to be able to realize the false signals are "little mini counter-trends".. And therefore needed to know that this study repaints.
HTH

 

[GoldStriple]

@GoldStriple You stated: it only 're-paints' in little mini counter-trends... so you agree it repaints. @sunnybabu is looking to write a python bot which is not going to be able to realize the false signals are "little mini counter-trends".. And therefore needed to know that this study repaints.
HTH

aww yes! good point. instinct-ly trying to defend unnecessarily.

 

[s1111]

copy study to a proper text editor - ie notepad++, TextPad, even primalscript..etc. Find "Reversal" which should be on the AddChartBubble Line and then remove "+low" and the "+ high"

then overwrite study with mods

Yes sir that did it, thank you so much.

 

[Saylarr]

Someone shared this indicator via a thread on Futures forum. I don't know the original name so I called it the reversal indicator. It uses moving averages, ZigZag pattern, and Fibonacci to generate reversal signals on your chart.

One thing to note is that this indicator will repaint. The Buy and Sell signal will disappear if the candlestick closed above or below the stop loss line. You can use that as a trigger point to cut losses early if that happens.

• Green = Buy Signal Bars
• Purple = Neutral
• Red = Sell Signal Bars

thinkScript Code

def price = close;
def superfast_length = 9;
def fast_length = 14;
def slow_length = 21;
def displace = 0;

def mov_avg9 = ExpAverage(price[-displace], superfast_length);
def mov_avg14 = ExpAverage(price[-displace], fast_length);
def mov_avg21 = ExpAverage(price[-displace], slow_length);

#moving averages
def Superfast = mov_avg9;
def Fast = mov_avg14;
def Slow = mov_avg21;

def buy = mov_avg9 > mov_avg14 and mov_avg14 > mov_avg21 and low > mov_avg9;
def stopbuy = mov_avg9 <= mov_avg14;
def buynow = !buy[1] and buy;
def buysignal = CompoundValue(1, if buynow and !stopbuy then 1 else if buysignal[1] == 1 and stopbuy then 0 else buysignal[1], 0);

def Buy_Signal = buysignal[1] == 0 and buysignal == 1;

#Alert(condition = buysignal[1] == 0 and buysignal == 1, text = "Buy Signal", sound = Sound.Bell, "alert type" = Alert.BAR);

def Momentum_Down = buysignal[1] == 1 and buysignal == 0;

#Alert(condition = buysignal[1] == 1 and buysignal == 0, text = "Momentum_Down", sound = Sound.Bell, "alert type" = Alert.BAR);

def sell = mov_avg9 < mov_avg14 and mov_avg14 < mov_avg21 and high < mov_avg9;
def stopsell = mov_avg9 >= mov_avg14;
def sellnow = !sell[1] and sell;
def sellsignal = CompoundValue(1, if sellnow and !stopsell then 1 else if sellsignal[1] == 1 and stopsell then 0 else sellsignal[1], 0);

def Sell_Signal = sellsignal[1] == 0 and sellsignal;

#Alert(condition = sellsignal[1] == 0 and sellsignal == 1, text = "Sell Signal", sound = Sound.Bell, "alert type" = Alert.BAR);

def Momentum_Up = sellsignal[1] == 1 and sellsignal == 0;

#Alert(condition = sellsignal[1] == 1 and sellSignal == 0, text = "Momentum_Up", sound = Sound.Bell, "alert type" = Alert.BAR);

plot Colorbars = if buysignal == 1 then 1 else if sellsignal == 1 then 2 else if buysignal == 0 or sellsignal == 0 then 3 else 0;
Colorbars.Hide();
Colorbars.DefineColor("Buy_Signal_Bars", Color.GREEN);
Colorbars.DefineColor("Sell_Signal_Bars", Color.RED);
Colorbars.DefineColor("Neutral", Color.PLUM);
#___________________________________________________________________________

input method = {default average, high_low};
def bubbleoffset = .0005;
def percentamount = .01;
def revAmount = .05;
def atrreversal = 2.0;
def atrlength = 5;
def pricehigh = high;
def pricelow = low;
def averagelength = 5;
def averagetype = AverageType.EXPONENTIAL;
def mah = MovingAverage(averagetype, pricehigh, averagelength);
def mal = MovingAverage(averagetype, pricelow, averagelength);
def priceh = if method == method.high_low then pricehigh else mah;
def pricel = if method == method.high_low then pricelow else mal;
def EI = ZigZagHighLow("price h" = priceh, "price l" = pricel, "percentage reversal" = percentamount, "absolute reversal" = revAmount, "atr length" = atrlength, "atr reversal" = atrreversal);
def reversalAmount = if (close * percentamount / 100) > Max(revAmount < atrreversal * reference ATR(atrlength), revAmount) then (close * percentamount / 100) else if revAmount < atrreversal * reference ATR(atrlength) then atrreversal * reference ATR(atrlength) else revAmount;
rec EISave = if !IsNaN(EI) then EI else GetValue(EISave, 1);
def chg = (if EISave == priceh then priceh else pricel) - GetValue(EISave, 1);
def isUp = chg >= 0;
rec isConf = AbsValue(chg) >= reversalAmount or (IsNaN(GetValue(EI, 1)) and GetValue(isConf, 1));
def EId = if isUp then 1 else 0;
#plot EnhancedLines = if EId <= 1 then EI else Double.NaN;
#EnhancedLines.AssignValueColor(if EId == 1 then Color.GREEN else if EId == 0 then Color.RED else Color.DARK_ORANGE);
#EnhancedLines.SetStyle(Curve.FIRM);
#EnhancedLines.EnableApproximation();
#EnhancedLines.HideBubble();
#Price Change between Enhanceds
def xxhigh = if EISave == priceh then priceh else xxhigh[1];
def chghigh = priceh - xxhigh[1];
def xxlow = if EISave == pricel then pricel else xxlow[1];
def chglow = pricel - xxlow[1];
def showBubbleschange = no;
AddChartBubble(showBubbleschange and !IsNaN(EI) and BarNumber() != 1, if isUp then priceh * (1 + bubbleoffset) else pricel * (1 - bubbleoffset) , "$" + chg , if isUp and chghigh > 0 then Color.GREEN else if isUp and chghigh < 0 then Color.RED else if isUp then Color.YELLOW else if !isUp and chglow > 0 then Color.GREEN else if !isUp and chglow < 0 then Color.RED else Color.YELLOW, isUp);
#Price at High/Low
def showBubblesprice = no;
AddChartBubble(showBubblesprice and !IsNaN(EI) and BarNumber() != 1, if isUp then priceh * (1 + bubbleoffset) else pricel * (1 - bubbleoffset) , if isUp then "$" + priceh else "$" + pricel , if isUp and chghigh > 0 then Color.GREEN else if isUp and chghigh < 0 then Color.RED else if isUp then Color.YELLOW else if !isUp and chglow > 0 then Color.GREEN else if !isUp and chglow < 0 then Color.RED else Color.YELLOW, isUp);
#Label for Confirmed/Unconfirmed Status of Current Enhanced

#Bar Count between Enhanceds
rec EIcount = if EISave[1] != EISave then 1 else if EISave[1] == EISave then EIcount[1] + 1 else 0;
def EIcounthilo = if EIcounthilo[1] == 0 and (EISave == priceh or EISave == pricel) then 1 else if EISave == priceh or EISave == pricel then EIcounthilo[1] + 1 else EIcounthilo[1];
def EIhilo = if EISave == priceh or EISave == pricel then EIcounthilo else EIcounthilo + 1;
def EIcounthigh = if EISave == priceh then EIcount[1] else Double.NaN;
def EIcountlow = if EISave == pricel then EIcount[1] else Double.NaN;
def showBubblesbarcount = no;
AddChartBubble(showBubblesbarcount and !IsNaN(EI) and BarNumber() != 1, if isUp then priceh * (1 + bubbleoffset) else pricel * (1 - bubbleoffset) , if EISave == priceh then EIcounthigh else EIcountlow, if isUp and chghigh > 0 then Color.GREEN else if isUp and chghigh < 0 then Color.RED else if isUp then Color.YELLOW else if !isUp and chglow > 0 then Color.GREEN else if !isUp and chglow < 0 then Color.RED else Color.YELLOW, if isUp then yes else no );
#Arrows
def EIL = if !IsNaN(EI) and !isUp then pricel else GetValue(EIL, 1);
def EIH = if !IsNaN(EI) and isUp then priceh else GetValue(EIH, 1);
def dir = CompoundValue(1, if EIL != EIL[1] or pricel == EIL[1] and pricel == EISave then 1 else if EIH != EIH[1] or priceh == EIH[1] and priceh == EISave then -1 else dir[1], 0);
def signal = CompoundValue(1, if dir > 0 and pricel > EIL then if signal[1] <= 0 then 1 else signal[1] else if dir < 0 and priceh < EIH then if signal[1] >= 0 then -1 else signal[1] else signal[1], 0);
def showarrows = yes;
def U1 = showarrows and signal > 0 and signal[1] <= 0;
#U1.SetPaintingStrategy(PaintingStrategy.BOOLEAN_ARROW_UP);
#U1.SetDefaultColor(Color.GREEN);
#U1.SetLineWeight(4);
def D1 = showarrows and signal < 0 and signal[1] >= 0;
#D1.SetPaintingStrategy(PaintingStrategy.BOOLEAN_ARROW_DOWN);
#D1.SetDefaultColor(Color.RED);
#D1.SetLineWeight(4);
def barnumber = BarNumber()[10];

AddChartBubble((barnumber and U1), if isUp then low else high, if showarrows and signal > 0 and signal[1] <= 0 then "Reversal:" + low else "" , if Colorbars == 3 then Color.PLUM else Color.UPTICK, no);
AddChartBubble((barnumber and D1), if isUp then low else high, if showarrows and signal < 0 and signal[1] >= 0 then "Reversal:" + high else "" , if Colorbars == 3 then Color.PLUM else Color.DOWNTICK, yes);

def revLineTop;
def revLineBot;

if barnumber and D1 {
revLineBot = Double.NaN;
revLineTop = high[1];
} else if barnumber and U1 {
revLineTop = Double.NaN;
revLineBot = low[1];
} else if !IsNaN(revLineBot[1]) and (Colorbars[2] == 2 or Colorbars[1] == 2) {
revLineBot = revLineBot[1];
revLineTop = Double.NaN;
} else if !IsNaN(revLineTop[1]) and (Colorbars[2] == 1 or Colorbars[1] == 1) {
revLineTop = revLineTop[1];
revLineBot = Double.NaN;
} else {
revLineTop = Double.NaN;
revLineBot = Double.NaN;
}

plot botLine = revLineBot[-1];
botLine.SetDefaultColor(Color.LIGHT_GREEN);
plot topLine = revLineTop[-1];
topLine.SetDefaultColor(Color.LIGHT_RED);

#Alerts
def usealerts = no;
#Alert(usealerts and U1, "EI-UP", Alert.BAR, Sound.Bell);
#Alert(usealerts and D1, "EI-DOWN", Alert.BAR, Sound.Chimes);
#Supply Demand Areas
rec data1 = CompoundValue(1, if (EISave == priceh or EISave == pricel) then data1[1] + 1 else data1[1], 0);
def datacount1 = (HighestAll(data1) - data1[1]);
def numbersuppdemandtoshow = 0;
input showSupplyDemand = {default Pivot, Arrow, None};
def idx = if showSupplyDemand == showSupplyDemand.Pivot then 1 else 0;
def rLow;
def rHigh;
if signal crosses 0 {
rLow = pricel[idx];
rHigh = priceh[idx];
} else {
rLow = rLow[1];
rHigh = rHigh[1];
}
def HighLine = if datacount1 <= numbersuppdemandtoshow and showSupplyDemand != showSupplyDemand.None and !IsNaN(close) and rHigh != 0 then rHigh else Double.NaN;

def LowLine = if datacount1 <= numbersuppdemandtoshow and showSupplyDemand != showSupplyDemand.None and !IsNaN(close) and rLow != 0 then rLow else Double.NaN;

def hlUp = if signal > 0 then HighLine else Double.NaN;
def hlDn = if signal < 0 then HighLine else Double.NaN;

def showsupplydemandcloud = no;
AddCloud(if showsupplydemandcloud then hlUp else Double.NaN, LowLine, Color.LIGHT_GREEN, Color.LIGHT_GREEN);
AddCloud(if showsupplydemandcloud then hlDn else Double.NaN, LowLine, Color.LIGHT_RED, Color.LIGHT_RED);
#Store Previous Data
def EIsave1 = if !IsNaN(EISave) then EISave else EIsave1[1];
def EIsave2 = EIsave1;
rec priorEI1 = if EIsave2 != EIsave2[1] then EIsave2[1] else priorEI1[1];
rec priorEI2 = if priorEI1 != priorEI1[1] then priorEI1[1] else priorEI2[1];
rec priorEI3 = if priorEI2 != priorEI2[1] then priorEI2[1] else priorEI3[1];
#Fibonacci Extensions
rec data = CompoundValue(1, if (EISave == priceh or EISave == pricel) then data[1] + 1 else data[1], 0);
def datacount = (HighestAll(data) - data[1]);
def numberextfibstoshow = 2;
rec cpo = if dir[1] != dir then 0 else 1;
def showFibExtLines = no;
def showtodayonly = no;
def today = if showtodayonly == yes then GetDay() == GetLastDay() else GetDay();
def extfib1 = if EISave == priceh then priceh - AbsValue(priorEI2 - priorEI1) * 1
else extfib1[1];
def extfib100 = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib1) and dir < 0 and cpo != 0 then extfib1[1] else Double.NaN;

def extfib1a = if EISave == priceh then priceh - AbsValue(priorEI2 - priorEI1) * 0.382
else extfib1a[1];
def extfib382 = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib1a) and dir < 0 and cpo != 0 then extfib1a[1] else Double.NaN;

def extfib2 = if EISave == priceh then priceh - AbsValue(priorEI2 - priorEI1) *
0.618 else extfib2[1];
def extfib618 = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib2) and dir < 0 and cpo != 0 then extfib2[1] else Double.NaN;

def extfib3 = if EISave == priceh then priceh - AbsValue(priorEI2 - priorEI1) *
1.618 else extfib3[1];
def extfib1618 = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib3) and dir < 0 and cpo != 0 then extfib3[1] else Double.NaN;

def extfib3a = if EISave == priceh then priceh - AbsValue(priorEI2 - priorEI1) *
2.000 else extfib3a[1];
def extfib2000 = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib3a) and dir < 0 and cpo != 0 then extfib3a[1] else Double.NaN;

def extfib4 = if EISave == priceh then priceh - AbsValue(priorEI2 - priorEI1) *
2.618 else extfib4[1];
def extfib2618 = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib4) and dir < 0 and cpo != 0 then extfib4[1] else Double.NaN;

def extfib5 = if EISave == priceh then priceh - AbsValue(priorEI2 - priorEI1) *
3.618 else extfib5[1];
def extfib3618 = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib5) and dir < 0 and cpo != 0 then extfib5[1] else Double.NaN;

def extfib1_ = if EISave == pricel then pricel + AbsValue(priorEI2 - priorEI1) * 1
else extfib1_[1];
def extfib100_ = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib1_) and dir > 0 and cpo != 0 then extfib1_[1] else Double.NaN;

def extfib1a_ = if EISave == pricel then pricel + AbsValue(priorEI2 - priorEI1) * 0.382
else extfib1a_[1];
def extfib382_ = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib1a_) and dir > 0 and cpo != 0 then extfib1a_[1] else Double.NaN;

def extfib2_ = if EISave == pricel then pricel + AbsValue(priorEI2 - priorEI1) *
0.618 else extfib2_[1];
def extfib618_ = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib2_) and dir > 0 and cpo != 0 then extfib2_[1] else Double.NaN;

def extfib3_ = if EISave == pricel then pricel + AbsValue(priorEI2 - priorEI1) *
1.618 else extfib3_[1];
def extfib1618_ = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib3_) and dir > 0 and cpo != 0 then extfib3_[1] else Double.NaN;

def extfib3a_ = if EISave == pricel then pricel + AbsValue(priorEI2 - priorEI1) *
2.000 else extfib3a_[1];
def extfib2000_ = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib3a_) and dir > 0 and cpo != 0 then extfib3a_[1] else Double.NaN;

def extfib4_ = if EISave == pricel then pricel + AbsValue(priorEI2 - priorEI1) *
2.618 else extfib4_[1];
def extfib2618_ = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib4_) and dir > 0 and cpo != 0 then extfib4_[1] else Double.NaN;

def extfib5_ = if EISave == pricel then pricel + AbsValue(priorEI2 - priorEI1) *
3.618 else extfib5_[1];
def extfib3618_ = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib5_) and dir > 0 and cpo != 0 then extfib5_[1] else Double.NaN;

def fibextbubblespacesinexpansion = 8;
def b = fibextbubblespacesinexpansion;
def direction = if !isUp then 1 else 0;
AddChartBubble( direction[b + 1] == 1 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib1[b + 2], "100%", Color.RED, no);
AddChartBubble( direction[b + 1] == 1 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib1a[b + 2], "38.2%", Color.RED, no);
AddChartBubble( direction[b + 1] == 1 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib2[b + 2], "61.8%", Color.RED, no);
AddChartBubble( direction[b + 1] == 1 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib3[b + 2], "161.8%", Color.RED, no);
AddChartBubble( direction[b + 1] == 1 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib3a[b + 2], "200%", Color.RED, no);
AddChartBubble( direction[b + 1] == 1 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib4[b + 2], "261.8%", Color.RED, no);
AddChartBubble( direction[b + 1] == 1 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib5[b + 2], "361.8%", Color.RED, no);
AddChartBubble( direction[b + 1] == 0 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib1_[b + 2], "100%", Color.GREEN, yes);
AddChartBubble( direction[b + 1] == 0 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib1a_[b + 2], "38.2%", Color.GREEN, yes);
AddChartBubble( direction[b + 1] == 0 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib2_[b + 2], "61.8%", Color.GREEN, yes);
AddChartBubble( direction[b + 1] == 0 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib3_[b + 2], "161.8%", Color.GREEN, yes);
AddChartBubble( direction[b + 1] == 0 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib3a_[b + 2], "200%", Color.GREEN, yes);
AddChartBubble( direction[b + 1] == 0 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib4_[b + 2], "261.8%", Color.GREEN, yes);
AddChartBubble( direction[b + 1] == 0 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib5_[b + 2], "361.8%", Color.GREEN, yes);
#Volume at Reversals
def vol = if BarNumber() == 0 then 0 else volume + vol[1];
def vol1 = if BarNumber() == 1 then volume else vol1[1];
def xxvol = if EISave == priceh or EISave == pricel then TotalSum(volume) else xxvol[1];
def chgvol = if xxvol - xxvol[1] + vol1 == vol then vol else xxvol - xxvol[1];
def showBubblesVolume = no;
AddChartBubble(showBubblesVolume and !IsNaN(EI) and BarNumber() != 1, if isUp then priceh * (1 + bubbleoffset) else pricel * (1 - bubbleoffset), chgvol, if isUp and chghigh > 0 then Color.GREEN else if isUp and chghigh < 0 then Color.RED else if isUp then Color.YELLOW else if !isUp and chglow > 0 then Color.GREEN else if !isUp and chglow < 0 then Color.RED else Color.YELLOW, if isUp then yes else no );

input usemanualfibskip = no;#Hint usemanualfibskip: Select no to use preprogrammed fibskip amounts. Select no, to use the amount entered at input fibskip.
input fibskip = .50;#Hint fibskip: Set input usemanualfibskip == yes to use this amount versus preprogrammed amounts. Standard is 1.0. This is percentage difference between fib high and low before a new fib grid created.
def showBubblesfibratio = no;
def showFibLabel = no;#Hint showfibLabel: Select yes to show label of current fib level as of last price
def showfiblines = no;
def fib1level = .236;
def fib2level = .382;
def fibMlevel = .500;
def fib3level = .618;
def fib4level = .786;
#Fibs
def datacount2 = (HighestAll(data1) - data1[1]);
def numberfibretracementstoshow = 2;
def fibskipit = if usemanualfibskip == no then if close > 800 then .25 else .5 else fibskip;
def EIfibh = if EISave == priceh and AbsValue(EISave - EISave[1]) > priceh * fibskipit * .01 then priceh else EIfibh[1];
def EIfibl = if EISave == pricel and AbsValue(EISave - EISave[1]) > priceh * fibskipit * .01 then pricel else EIfibl[1];
def range = EIfibh - EIfibl;
def fibH = if showfiblines == no then Double.NaN else if datacount2 <= numberfibretracementstoshow then EIfibh else Double.NaN;
def fibL = if showfiblines == no then Double.NaN else if datacount2 <= numberfibretracementstoshow then EIfibl else Double.NaN;
def fibM = if showfiblines == no then Double.NaN else if datacount2 <= numberfibretracementstoshow then EIfibl + range * fibMlevel else Double.NaN;
def fib1 = if showfiblines == no then Double.NaN else if datacount2 <= numberfibretracementstoshow then EIfibl + range * fib1level else Double.NaN;
def fib2 = if showfiblines == no then Double.NaN else if datacount2 <= numberfibretracementstoshow then EIfibl + range * fib2level else Double.NaN;
def fib3 = if showfiblines == no then Double.NaN else if datacount2 <= numberfibretracementstoshow then EIfibl + range * fib3level else Double.NaN;
def fib4 = if showfiblines == no then Double.NaN else if datacount2 <= numberfibretracementstoshow then EIfibl + range * fib4level else Double.NaN;

AddLabel(showFibLabel, Concat( "Current Fib Level ", AsPercent((close - EIfibl) / (range))), if close > EIfibl then Color.GREEN else if EIfibh == close then Color.WHITE else Color.RED);

AddChartBubble(showBubblesfibratio and !IsNaN(EI) and BarNumber() != 1, if isUp then priceh * (1 + bubbleoffset) else pricel * (1 - bubbleoffset) , if isUp then AsPercent((priceh - EIfibl) / (range)) else AsPercent((pricel - EIfibl) / range), if isUp and chghigh > 0 then Color.GREEN else if isUp and chghigh < 0 then Color.RED else if isUp then Color.GREEN else if !isUp and chglow > 0 then Color.GREEN else if !isUp and chglow < 0 then Color.RED else Color.RED, isUp);

Shareable Link

https://tos.mx/aGoeQ4

Credit:

• SkinnyFry
• Bayside of Enhanced Investor

Scanner

If you would like to scan for new signals, be it on the daily, hourly, or 15m chart, here is the scanner for it. Made by @theelderwand

• https://tos.mx/vlVadom

The Enhanced Version

Added some additional features to the default script above. You can check out the enhanced trend reversal indicator here.

Video Tutorial

Hello, I was reading but I don't think I found it, correct me if someone has already answered this question.

Has anyone managed to translate this indicator into PineScript for tradingView?

I have been trying but the truth is that it is very difficult for me.

 

[rad14733]

@Saylarr In all honesty, this is a Thinkscript forum for Thinkorswim and not a Pinescript forum for Tradingview... Have you asked in the Tradingview forums...??? We really shouldn't be expected to translate indicators to another platform, just as we shouldn't be expected to translate indicators from other platforms into Thinkscript... It truly boggles my mind that so many members have such expectations... When I can't figure something out myself I make do without...

 

[Saylarr]

@Saylarr In all honesty, this is a Thinkscript forum for Thinkorswim and not a Pinescript forum for Tradingview... Have you asked in the Tradingview forums...??? We really shouldn't be expected to translate indicators to another platform, just as we shouldn't be expected to translate indicators from other platforms into Thinkscript... It truly boggles my mind that so many members have such expectations... When I can't figure something out myself I make do without...

I honestly do not share your opinion and honestly I would prefer not to take pointers made in this forum to other forums. But hey if it bothers so much, I'll have to do it. I don't know pinescript forums. Do you have any suggestions?

 

[wtf_dude]

I honestly do not share your opinion and honestly I would prefer not to take pointers made in this forum to other forums. But hey if it bothers so much, I'll have to do it. I don't know pinescript forums. Do you have any suggestions?

Gonna have to teach yourself like we do with thinkscript or hire somebody. https://www.pinecoders.com/