Confirmation Candles Indicator For ThinkorSwim

Gymini · Mar 16, 2022

scans, watchlists, columns, swings scalps lower upper holy **** are you guys even spending time using this guys work or are you just decorating your chart?

Beltaco · Mar 16, 2022

Christopher84 said:
Hi @Beltaco,
The codes are working properly. Please read carefully. The strategies posted here on pg.55 have been altered from the default settings in order to get the floating PL study to work properly for each strategy. However, the 1 min strategy posted here on pg.55 will paint EXACTLY like the Scalper Upper posted on pg.1 of this thread. I hope this helps!

Thanks for confirming. I may be doing something wrong, this is what I'm getting.

Falout · Mar 16, 2022

Christopher84 said:

Hey @Falout!
It appears that the default time frames have to be changed in the code to get the floating PL study to work. I have put together 3 different versions. Please be cautious that these strategies can repaint until all time frames in the calculation have closed. Here's the Scalper strategy for 3 min chart.

Code:

#Scalper Upper v2 Strategy Created 03/16/2022 by Christopher84

declare upper;

input price = close;
input length = 10;
input length2 = 35;
input agperiod1 = { "1 min", "2 min", default "3 min", "5 min", "10 min", "15 min", "30 min", "1 hour", "2 hours", "4 hours", "Day", "Week", "Month"};
input agperiod2 = {"1 min", "2 min", "3 min",default "5 min", "10 min", "15 min", "30 min", "1 hour", "2 hours", "4 hours", "Day", "Week", "Month"};
input agperiod3 = {"1 min", "2 min", "3 min", "5 min", default "10 min", "15 min", "30 min", "1 hour", "2 hours", "4 hours", "Day", "Week", "Month"};
input agperiod4 = {"1 min", "2 min", "3 min", "5 min", "10 min", "15 min", default "30 min", "1 hour", "2 hours", "4 hours", "Day", "Week", "Month"};
input agperiod5 = {"1 min", "2 min", "3 min", "5 min", "10 min", "15 min", "30 min", "1 hour", "2 hours", default "4 hours", "Day", "Week", "Month"};
input agperiod6 = {"1 min", "2 min", "3 min", "5 min", "10 min", "15 min", "30 min", "1 hour", "2 hours", "4 hours", default "Day", "Week", "Month"};
def displace = 0;
input paintCandles = yes;
input show_ema_cloud = yes;

#Current Period
plot AvgExp = ExpAverage(price[-displace], length);
AvgExp.SetStyle(Curve.SHORT_DASH);
def UPC1 = AvgExp > AvgExp[1];
def DNC1 = AvgExp < AvgExp[1];

plot AvgExp2 = ExpAverage(price[-displace], length2);
AvgExp2.SetStyle(Curve.SHORT_DASH);
def UPC2 = AvgExp2 > AvgExp2[1];
def DNC2 = AvgExp2 < AvgExp2[1];

def Below = AvgExp < AvgExp2;
def Spark = UPC1 + UPC2 + Below;

def UPEMA = AvgExp[1] < AvgExp;
def DOWNEMA = AvgExp[1] > AvgExp;
AvgExp.AssignValueColor(if UPEMA then Color.LIGHT_GREEN else if DOWNEMA then Color.RED else Color.YELLOW);

def UPEMA2 = AvgExp2[1] < AvgExp2;
def DOWNEMA2 = AvgExp2[1] > AvgExp2;
AvgExp2.AssignValueColor(if UPEMA2 then Color.LIGHT_GREEN else if DOWNEMA2 then Color.RED else Color.YELLOW);

AddCloud(if show_ema_cloud and (AvgExp2 > AvgExp) then AvgExp2 else Double.NaN, AvgExp, Color.LIGHT_RED, Color.CURRENT);
AddCloud(if show_ema_cloud and (AvgExp > AvgExp2) then AvgExp else Double.NaN, AvgExp2, Color.LIGHT_GREEN, Color.CURRENT);

#Agperiod1
def avg = ExpAverage(close(period = agperiod1), length);
def height = avg - avg[length];

def avg2 = ExpAverage(close(period = agperiod1), length2);
def height2 = avg2 - avg2[length2];

def UP = avg > avg2;
def DOWN = avg < avg2;

def R1UP = avg > avg[1];
def R1DN = avg < avg[1];
def R2UP = avg2 > avg2[1];
def R2DN = avg2 < avg2[1];

#Agperiod2
def avg3 = ExpAverage(close(period = agperiod2), length);
def height3 = avg3 - avg3[length];

def avg4 = ExpAverage(close(period = agperiod2), length2);
def height4 = avg4 - avg4[length2];

def UP2 = avg3 > avg4;
def DOWN2 = avg3 < avg4;

def R3UP = avg3 > avg3[1];
def R3DN = avg3 < avg3[1];
def R4UP = avg4 > avg4[1];
def R4DN = avg4 < avg4[1];

#Agperiod3
def avg5 = ExpAverage(close(period = agperiod3), length);
def height5 = avg5 - avg5[length];

def avg6 = ExpAverage(close(period = agperiod3), length2);
def height6 = avg6 - avg6[length2];

def UP3 = avg5 > avg6;
def DOWN3 = avg5 < avg6;

def R5UP = avg5 > avg5[1];
def R5DN = avg5 < avg5[1];
def R6UP = avg6 > avg6[1];
def R6DN = avg6 < avg6[1];

#Agperiod4
def avg7 = ExpAverage(close(period = agperiod4), length);
def height7 = avg7 - avg7[length];

def avg8 = ExpAverage(close(period = agperiod4), length2);
def height8 = avg8 - avg8[length2];

def UP4 = avg7 > avg8;
def DOWN4 = avg7 < avg8;

def R7UP = avg7 > avg7[1];
def R7DN = avg7 < avg7[1];
def R8UP = avg8 > avg8[1];
def R8DN = avg8 < avg8[1];

#Agperiod5
def avg9 = ExpAverage(close(period = agperiod5), length);
def height9 = avg9 - avg9[length];

def avg10 = ExpAverage(close(period = agperiod5), length2);
def height10 = avg10 - avg10[length2];

def UP5 = avg9 > avg10;
def DOWN5 = avg9 < avg10;

def R9UP = avg9 > avg9[1];
def R9DN = avg9 < avg9[1];
def R10UP = avg10 > avg10[1];
def R10DN = avg10 < avg10[1];

#Agperiod6
def avg11 = ExpAverage(close(period = agperiod6), length);
def height11 = avg11 - avg11[length];

def avg12 = ExpAverage(close(period = agperiod6), length2);
def height12 = avg12 - avg12[length2];

def UP6 = avg11 > avg12;
def DOWN6 = avg11 < avg12;

def R11UP = avg11 > avg11[1];
def R11DN = avg11 < avg11[1];
def R12UP = avg12 > avg12[1];
def R12DN = avg12 < avg12[1];

def Long_Only = UP + UP2 + UP3 + UP4 + UP5 + UP6;
def Short_Only = DOWN + DOWN2 + DOWN3 + DOWN4 + DOWN5 + DOWN6;
def Consensus_Bias = Long_Only - Short_Only;

def RUP = UPC1 + UPC2 + R1UP + R2UP + R3UP + R4UP + R5UP + R6UP + R7UP + R8UP + R9UP + R10UP + R11UP + R12UP;
def RDN = DNC1 + DNC2 + R1DN + R2DN + R3DN + R4DN + R5DN + R6DN + R7DN + R8DN + R9DN + R10DN + R11DN + R12DN;
def ConsensusR = RUP - RDN;

script WMA_Smooth {
    input price = hl2;
    plot smooth = (4 * price
+ 3 * price[1]
+ 2 * price[2]
+ price[3]) / 10;
}

script Phase_Accumulation {
# This is Ehler's Phase Accumulation code. It has a full cycle delay.
# However, it computes the correction factor to a very high degree.
#
    input price = hl2;

    rec Smooth;
    rec Detrender;
    rec Period;
    rec Q1;
    rec I1;
    rec I1p;
    rec Q1p;
    rec Phase1;
    rec Phase;
    rec DeltaPhase;
    rec DeltaPhase1;
    rec InstPeriod1;
    rec InstPeriod;
    def CorrectionFactor;

    if BarNumber() <= 5
    then {
        Period = 0;
        Smooth = 0;
        Detrender = 0;
        CorrectionFactor = 0;
        Q1 = 0;
        I1 = 0;
        Q1p = 0;
        I1p = 0;
        Phase = 0;
        Phase1 = 0;
        DeltaPhase1 = 0;
        DeltaPhase = 0;
        InstPeriod = 0;
        InstPeriod1 = 0;
    } else {
        CorrectionFactor = 0.075 * Period[1] + 0.54;

# Smooth and detrend my smoothed signal:
        Smooth = WMA_Smooth(price);
        Detrender = ( 0.0962 * Smooth
+ 0.5769 * Smooth[2]
- 0.5769 * Smooth[4]
- 0.0962 * Smooth[6] ) * CorrectionFactor;

# Compute Quadrature and Phase of Detrended signal:
        Q1p = ( 0.0962 * Detrender
+ 0.5769 * Detrender[2]
- 0.5769 * Detrender[4]
- 0.0962 * Detrender[6] ) * CorrectionFactor;
        I1p = Detrender[3];

# Smooth out Quadrature and Phase:
        I1 = 0.15 * I1p + 0.85 * I1p[1];
        Q1 = 0.15 * Q1p + 0.85 * Q1p[1];

# Determine Phase
        if I1 != 0
        then {
# Normally, ATAN gives results from -pi/2 to pi/2.
# We need to map this to circular coordinates 0 to 2pi

            if Q1 >= 0 and I1 > 0
            then { # Quarant 1
                Phase1 = ATan(AbsValue(Q1 / I1));
            } else if Q1 >= 0 and I1 < 0
            then { # Quadrant 2
                Phase1 = Double.Pi - ATan(AbsValue(Q1 / I1));
            } else if Q1 < 0 and I1 < 0
            then { # Quadrant 3
                Phase1 = Double.Pi + ATan(AbsValue(Q1 / I1));
            } else { # Quadrant 4
                Phase1 = 2 * Double.Pi - ATan(AbsValue(Q1 / I1));
            }
        } else if Q1 > 0
        then { # I1 == 0, Q1 is positive
            Phase1 = Double.Pi / 2;
        } else if Q1 < 0
        then { # I1 == 0, Q1 is negative
            Phase1 = 3 * Double.Pi / 2;
        } else { # I1 and Q1 == 0
            Phase1 = 0;
        }

# Convert phase to degrees
        Phase = Phase1 * 180 / Double.Pi;

        if Phase[1] < 90 and Phase > 270
        then {
# This occurs when there is a big jump from 360-0
            DeltaPhase1 = 360 + Phase[1] - Phase;
        } else {
            DeltaPhase1 = Phase[1] - Phase;
        }

# Limit our delta phases between 7 and 60
        if DeltaPhase1 < 7
        then {
            DeltaPhase = 7;
        } else if DeltaPhase1 > 60
        then {
            DeltaPhase = 60;
        } else {
            DeltaPhase = DeltaPhase1;
        }

# Determine Instantaneous period:
        InstPeriod1 =
-1 * (fold i = 0 to 40 with v=0 do
if v < 0 then
v
else if v > 360 then
-i
else
v + GetValue(DeltaPhase, i, 41)
);

        if InstPeriod1 <= 0
        then {
            InstPeriod = InstPeriod[1];
        } else {
            InstPeriod = InstPeriod1;
        }

        Period = 0.25 * InstPeriod + 0.75 * Period[1];
    }
    plot DC = Period;
}

script Ehler_MAMA {
    input price = hl2;
    input FastLimit = 0.5;
    input SlowLimit = 0.05;


    rec Period;
    rec Period_raw;
    rec Period_cap;
    rec Period_lim;

    rec Smooth;
    rec Detrender;
    rec I1;
    rec Q1;
    rec jI;
    rec jQ;
    rec I2;
    rec Q2;
    rec I2_raw;
    rec Q2_raw;

    rec Phase;
    rec DeltaPhase;
    rec DeltaPhase_raw;
    rec alpha;
    rec alpha_raw;

    rec Re;
    rec Im;
    rec Re_raw;
    rec Im_raw;

    rec SmoothPeriod;
    rec vmama;
    rec vfama;

    def CorrectionFactor = Phase_Accumulation(price).CorrectionFactor;

    if BarNumber() <= 5
    then {
        Smooth = 0;
        Detrender = 0;

        Period = 0;
        Period_raw = 0;
        Period_cap = 0;
        Period_lim = 0;
        I1 = 0;
        Q1 = 0;
        I2 = 0;
        Q2 = 0;
        jI = 0;
        jQ = 0;
        I2_raw = 0;
        Q2_raw = 0;
        Re = 0;
        Im = 0;
        Re_raw = 0;
        Im_raw = 0;
        SmoothPeriod = 0;
        Phase = 0;
        DeltaPhase = 0;
        DeltaPhase_raw = 0;
        alpha = 0;
        alpha_raw = 0;
        vmama = 0;
        vfama = 0;
    } else {
# Smooth and detrend my smoothed signal:
        Smooth = WMA_Smooth(price);
        Detrender = ( 0.0962 * Smooth
+ 0.5769 * Smooth[2]
- 0.5769 * Smooth[4]
- 0.0962 * Smooth[6] ) * CorrectionFactor;

        Q1 = ( 0.0962 * Detrender
+ 0.5769 * Detrender[2]
- 0.5769 * Detrender[4]
- 0.0962 * Detrender[6] ) * CorrectionFactor;
        I1 = Detrender[3];

        jI = ( 0.0962 * I1
+ 0.5769 * I1[2]
- 0.5769 * I1[4]
- 0.0962 * I1[6] ) * CorrectionFactor;

        jQ = ( 0.0962 * Q1
+ 0.5769 * Q1[2]
- 0.5769 * Q1[4]
- 0.0962 * Q1[6] ) * CorrectionFactor;

# This is the complex conjugate
        I2_raw = I1 - jQ;
        Q2_raw = Q1 + jI;

        I2 = 0.2 * I2_raw + 0.8 * I2_raw[1];
        Q2 = 0.2 * Q2_raw + 0.8 * Q2_raw[1];

        Re_raw = I2 * I2[1] + Q2 * Q2[1];
        Im_raw = I2 * Q2[1] - Q2 * I2[1];

        Re = 0.2 * Re_raw + 0.8 * Re_raw[1];
        Im = 0.2 * Im_raw + 0.8 * Im_raw[1];

# Compute the phase
        if Re != 0 and Im != 0
        then {
            Period_raw = 2 * Double.Pi / ATan(Im / Re);
        } else {
            Period_raw = 0;
        }

        if Period_raw > 1.5 * Period_raw[1]
        then {
            Period_cap = 1.5 * Period_raw[1];
        } else if Period_raw < 0.67 * Period_raw[1] {
            Period_cap = 0.67 * Period_raw[1];
        } else {
            Period_cap = Period_raw;
        }

        if Period_cap < 6
        then {
            Period_lim = 6;
        } else if Period_cap > 50
        then {
            Period_lim = 50;
        } else {
            Period_lim = Period_cap;
        }

        Period = 0.2 * Period_lim + 0.8 * Period_lim[1];
        SmoothPeriod = 0.33 * Period + 0.67 * SmoothPeriod[1];

        if I1 != 0
        then {
            Phase = ATan(Q1 / I1);
        } else if Q1 > 0
        then { # Quadrant 1:
            Phase = Double.Pi / 2;
        } else if Q1 < 0
        then { # Quadrant 4:
            Phase = -Double.Pi / 2;
        } else { # Both numerator and denominator are 0.
            Phase = 0;
        }

        DeltaPhase_raw = Phase[1] - Phase;
        if DeltaPhase_raw < 1
        then {
            DeltaPhase = 1;
        } else {
            DeltaPhase = DeltaPhase_raw;
        }

        alpha_raw = FastLimit / DeltaPhase;
        if alpha_raw < SlowLimit
        then {
            alpha = SlowLimit;
        } else {
            alpha = alpha_raw;
        }
        vmama = alpha * price + (1 - alpha) * vmama[1];
        vfama = 0.5 * alpha * vmama + (1 - 0.5 * alpha) * vfama[1];
    }

    plot MAMA = vmama;
    plot FAMA = vfama;
}


input price2 = hl2;
input FastLimit = 0.5;
input SlowLimit = 0.05;

def MAMA = Ehler_MAMA(price2, FastLimit, SlowLimit).MAMA;
def FAMA = Ehler_MAMA(price2, FastLimit, SlowLimit).FAMA;

def Crossing = Crosses((MAMA < FAMA), yes);
#Crossing.SetPaintingStrategy(PaintingStrategy.BOOLEAN_ARROW_UP);

def Crossing1 = Crosses((MAMA > FAMA), yes);
#Crossing1.SetPaintingStrategy(PaintingStrategy.BOOLEAN_ARROW_DOWN);

AddLabel(yes, Concat("MAMA: ", Concat("",
if MAMA > FAMA then "Bull" else "Bear")),

if MAMA > FAMA then Color.GREEN else Color.RED);

##################################
plot C3_MF_Line = (MAMA + FAMA) / 2;
C3_MF_Line.SetPaintingStrategy(PaintingStrategy.LINE);
C3_MF_Line.SetLineWeight(3);

def direction = if ConsensusR > Consensus_Bias then 1 else if ConsensusR < Consensus_Bias then -1 else 0;
C3_MF_Line.AssignValueColor(if paintCandles and ((direction == 1) and (price > C3_MF_Line)) then Color.GREEN else if paintCandles and ((direction == -1) and (price < C3_MF_Line)) then Color.RED else Color.GRAY);


plot buy = AvgExp crosses above AvgExp2;#direction crosses above 0;
buy.SetPaintingStrategy(PaintingStrategy.BOOLEAN_ARROW_UP);
buy.SetDefaultColor(Color.WHITE);

plot sell = AvgExp crosses below AvgExp2;#direction crosses below 0;
sell.SetPaintingStrategy(PaintingStrategy.BOOLEAN_ARROW_DOWN );
sell.SetDefaultColor(Color.WHITE);

AssignPriceColor(if paintCandles then if direction == 1 then Color.GREEN else if direction == -1 then Color.RED else Color.GRAY else Color.CURRENT);

AddLabel(yes, if (Spark == 3) then "SPARK UP = " + Round(Spark, 1) else if (Spark == 0) then  "SPARK DOWN = " + Round(Spark, 1) else "SPARK = " + Round(Spark, 1), if (Spark == 3) then Color.YELLOW else if ((Spark == 2) and (AvgExp > AvgExp2)) then Color.GREEN else if (Spark == 0) then Color.RED else Color.GRAY);

AddLabel(yes, if ((UP6 == 1) and (Consensus_Bias > 0)) then " SCALP_LONG " else if ((DOWN6) and (Consensus_Bias < 0)) then " SCALP_SHORT " else " CHOP ", if ((Consensus_Bias > 0) and (UP6 == 1)) then Color.GREEN else if ((Consensus_Bias < 0) and (DOWN6 == 1)) then Color.RED else Color.GRAY);

AddLabel(yes, if (ConsensusR > 0) then " LONG BIAS = %" + Round((ConsensusR / 14) * 100, 1) + " " else if (ConsensusR < 0) then  " SHORT BIAS = %" + Round(((ConsensusR * -1) / 14) * 100, 1) + " " else " CHOP =" + Round((ConsensusR / 14) * 100, 1) + " ", if (ConsensusR > 0) then Color.GREEN else if (ConsensusR < 0) then Color.RED else Color.GRAY);

Alert(direction crosses above 0, "long", Alert.BAR, Sound.DING);
Alert(direction crosses below 0, "short", Alert.BAR, Sound.DING);

#Strategy
def Long_Entry =  (ConsensusR crosses above Consensus_Bias);
def Long_Exit =  (ConsensusR crosses below Consensus_Bias);
AddOrder(OrderType.BUY_AUTO, condition = Long_Entry, price = open[-1], 1, tickcolor = GetColor(1), arrowcolor = Color.LIME, name = "LE");
AddOrder(OrderType.SELL_AUTO, condition = Long_Exit, price = open[-1], 1, tickcolor = GetColor(2), arrowcolor = Color.LIME, name = "SE");

Alert(Long_Entry, "long", Alert.BAR, Sound.DING);
Alert(Long_Exit, "short", Alert.BAR, Sound.DING);

Here's the strategy for the 1 min chart.

Code:

#Scalper Upper v2 Strategy Created 03/16/2022 by Christopher84

declare upper;

input price = close;
input length = 10;
input length2 = 35;
input agperiod1 = { "1 min", default "2 min", "3 min", "5 min", "10 min", "15 min", "30 min", "1 hour", "2 hours", "4 hours", "Day", "Week", "Month"};
input agperiod2 = {"1 min", "2 min", default "3 min", "5 min", "10 min", "15 min", "30 min", "1 hour", "2 hours", "4 hours", "Day", "Week", "Month"};
input agperiod3 = {"1 min", "2 min", "3 min", "5 min", default "10 min", "15 min", "30 min", "1 hour", "2 hours", "4 hours", "Day", "Week", "Month"};
input agperiod4 = {"1 min", "2 min", "3 min", "5 min", "10 min", "15 min", default "30 min", "1 hour", "2 hours", "4 hours", "Day", "Week", "Month"};
input agperiod5 = {"1 min", "2 min", "3 min", "5 min", "10 min", "15 min", "30 min", "1 hour", "2 hours", default "4 hours", "Day", "Week", "Month"};
input agperiod6 = {"1 min", "2 min", "3 min", "5 min", "10 min", "15 min", "30 min", "1 hour", "2 hours", "4 hours", default "Day", "Week", "Month"};
def displace = 0;
input paintCandles = yes;
input show_ema_cloud = yes;

#Current Period
plot AvgExp = ExpAverage(price[-displace], length);
AvgExp.SetStyle(Curve.SHORT_DASH);
def UPC1 = AvgExp > AvgExp[1];
def DNC1 = AvgExp < AvgExp[1];

plot AvgExp2 = ExpAverage(price[-displace], length2);
AvgExp2.SetStyle(Curve.SHORT_DASH);
def UPC2 = AvgExp2 > AvgExp2[1];
def DNC2 = AvgExp2 < AvgExp2[1];

def Below = AvgExp < AvgExp2;
def Spark = UPC1 + UPC2 + Below;

def UPEMA = AvgExp[1] < AvgExp;
def DOWNEMA = AvgExp[1] > AvgExp;
AvgExp.AssignValueColor(if UPEMA then Color.LIGHT_GREEN else if DOWNEMA then Color.RED else Color.YELLOW);

def UPEMA2 = AvgExp2[1] < AvgExp2;
def DOWNEMA2 = AvgExp2[1] > AvgExp2;
AvgExp2.AssignValueColor(if UPEMA2 then Color.LIGHT_GREEN else if DOWNEMA2 then Color.RED else Color.YELLOW);

AddCloud(if show_ema_cloud and (AvgExp2 > AvgExp) then AvgExp2 else Double.NaN, AvgExp, Color.LIGHT_RED, Color.CURRENT);
AddCloud(if show_ema_cloud and (AvgExp > AvgExp2) then AvgExp else Double.NaN, AvgExp2, Color.LIGHT_GREEN, Color.CURRENT);

#Agperiod1
def avg = ExpAverage(close(period = agperiod1), length);
def height = avg - avg[length];

def avg2 = ExpAverage(close(period = agperiod1), length2);
def height2 = avg2 - avg2[length2];

def UP = avg > avg2;
def DOWN = avg < avg2;

def R1UP = avg > avg[1];
def R1DN = avg < avg[1];
def R2UP = avg2 > avg2[1];
def R2DN = avg2 < avg2[1];

#Agperiod2
def avg3 = ExpAverage(close(period = agperiod2), length);
def height3 = avg3 - avg3[length];

def avg4 = ExpAverage(close(period = agperiod2), length2);
def height4 = avg4 - avg4[length2];

def UP2 = avg3 > avg4;
def DOWN2 = avg3 < avg4;

def R3UP = avg3 > avg3[1];
def R3DN = avg3 < avg3[1];
def R4UP = avg4 > avg4[1];
def R4DN = avg4 < avg4[1];

#Agperiod3
def avg5 = ExpAverage(close(period = agperiod3), length);
def height5 = avg5 - avg5[length];

def avg6 = ExpAverage(close(period = agperiod3), length2);
def height6 = avg6 - avg6[length2];

def UP3 = avg5 > avg6;
def DOWN3 = avg5 < avg6;

def R5UP = avg5 > avg5[1];
def R5DN = avg5 < avg5[1];
def R6UP = avg6 > avg6[1];
def R6DN = avg6 < avg6[1];

#Agperiod4
def avg7 = ExpAverage(close(period = agperiod4), length);
def height7 = avg7 - avg7[length];

def avg8 = ExpAverage(close(period = agperiod4), length2);
def height8 = avg8 - avg8[length2];

def UP4 = avg7 > avg8;
def DOWN4 = avg7 < avg8;

def R7UP = avg7 > avg7[1];
def R7DN = avg7 < avg7[1];
def R8UP = avg8 > avg8[1];
def R8DN = avg8 < avg8[1];

#Agperiod5
def avg9 = ExpAverage(close(period = agperiod5), length);
def height9 = avg9 - avg9[length];

def avg10 = ExpAverage(close(period = agperiod5), length2);
def height10 = avg10 - avg10[length2];

def UP5 = avg9 > avg10;
def DOWN5 = avg9 < avg10;

def R9UP = avg9 > avg9[1];
def R9DN = avg9 < avg9[1];
def R10UP = avg10 > avg10[1];
def R10DN = avg10 < avg10[1];

#Agperiod6
def avg11 = ExpAverage(close(period = agperiod6), length);
def height11 = avg11 - avg11[length];

def avg12 = ExpAverage(close(period = agperiod6), length2);
def height12 = avg12 - avg12[length2];

def UP6 = avg11 > avg12;
def DOWN6 = avg11 < avg12;

def R11UP = avg11 > avg11[1];
def R11DN = avg11 < avg11[1];
def R12UP = avg12 > avg12[1];
def R12DN = avg12 < avg12[1];

def Long_Only = UP + UP2 + UP3 + UP4 + UP5 + UP6;
def Short_Only = DOWN + DOWN2 + DOWN3 + DOWN4 + DOWN5 + DOWN6;
def Consensus_Bias = Long_Only - Short_Only;

def RUP = UPC1 + UPC2 + R1UP + R2UP + R3UP + R4UP + R5UP + R6UP + R7UP + R8UP + R9UP + R10UP + R11UP + R12UP;
def RDN = DNC1 + DNC2 + R1DN + R2DN + R3DN + R4DN + R5DN + R6DN + R7DN + R8DN + R9DN + R10DN + R11DN + R12DN;
def ConsensusR = RUP - RDN;

script WMA_Smooth {
    input price = hl2;
    plot smooth = (4 * price
+ 3 * price[1]
+ 2 * price[2]
+ price[3]) / 10;
}

script Phase_Accumulation {
# This is Ehler's Phase Accumulation code. It has a full cycle delay.
# However, it computes the correction factor to a very high degree.
#
    input price = hl2;

    rec Smooth;
    rec Detrender;
    rec Period;
    rec Q1;
    rec I1;
    rec I1p;
    rec Q1p;
    rec Phase1;
    rec Phase;
    rec DeltaPhase;
    rec DeltaPhase1;
    rec InstPeriod1;
    rec InstPeriod;
    def CorrectionFactor;

    if BarNumber() <= 5
    then {
        Period = 0;
        Smooth = 0;
        Detrender = 0;
        CorrectionFactor = 0;
        Q1 = 0;
        I1 = 0;
        Q1p = 0;
        I1p = 0;
        Phase = 0;
        Phase1 = 0;
        DeltaPhase1 = 0;
        DeltaPhase = 0;
        InstPeriod = 0;
        InstPeriod1 = 0;
    } else {
        CorrectionFactor = 0.075 * Period[1] + 0.54;

# Smooth and detrend my smoothed signal:
        Smooth = WMA_Smooth(price);
        Detrender = ( 0.0962 * Smooth
+ 0.5769 * Smooth[2]
- 0.5769 * Smooth[4]
- 0.0962 * Smooth[6] ) * CorrectionFactor;

# Compute Quadrature and Phase of Detrended signal:
        Q1p = ( 0.0962 * Detrender
+ 0.5769 * Detrender[2]
- 0.5769 * Detrender[4]
- 0.0962 * Detrender[6] ) * CorrectionFactor;
        I1p = Detrender[3];

# Smooth out Quadrature and Phase:
        I1 = 0.15 * I1p + 0.85 * I1p[1];
        Q1 = 0.15 * Q1p + 0.85 * Q1p[1];

# Determine Phase
        if I1 != 0
        then {
# Normally, ATAN gives results from -pi/2 to pi/2.
# We need to map this to circular coordinates 0 to 2pi

            if Q1 >= 0 and I1 > 0
            then { # Quarant 1
                Phase1 = ATan(AbsValue(Q1 / I1));
            } else if Q1 >= 0 and I1 < 0
            then { # Quadrant 2
                Phase1 = Double.Pi - ATan(AbsValue(Q1 / I1));
            } else if Q1 < 0 and I1 < 0
            then { # Quadrant 3
                Phase1 = Double.Pi + ATan(AbsValue(Q1 / I1));
            } else { # Quadrant 4
                Phase1 = 2 * Double.Pi - ATan(AbsValue(Q1 / I1));
            }
        } else if Q1 > 0
        then { # I1 == 0, Q1 is positive
            Phase1 = Double.Pi / 2;
        } else if Q1 < 0
        then { # I1 == 0, Q1 is negative
            Phase1 = 3 * Double.Pi / 2;
        } else { # I1 and Q1 == 0
            Phase1 = 0;
        }

# Convert phase to degrees
        Phase = Phase1 * 180 / Double.Pi;

        if Phase[1] < 90 and Phase > 270
        then {
# This occurs when there is a big jump from 360-0
            DeltaPhase1 = 360 + Phase[1] - Phase;
        } else {
            DeltaPhase1 = Phase[1] - Phase;
        }

# Limit our delta phases between 7 and 60
        if DeltaPhase1 < 7
        then {
            DeltaPhase = 7;
        } else if DeltaPhase1 > 60
        then {
            DeltaPhase = 60;
        } else {
            DeltaPhase = DeltaPhase1;
        }

# Determine Instantaneous period:
        InstPeriod1 =
-1 * (fold i = 0 to 40 with v=0 do
if v < 0 then
v
else if v > 360 then
-i
else
v + GetValue(DeltaPhase, i, 41)
);

        if InstPeriod1 <= 0
        then {
            InstPeriod = InstPeriod[1];
        } else {
            InstPeriod = InstPeriod1;
        }

        Period = 0.25 * InstPeriod + 0.75 * Period[1];
    }
    plot DC = Period;
}

script Ehler_MAMA {
    input price = hl2;
    input FastLimit = 0.5;
    input SlowLimit = 0.05;


    rec Period;
    rec Period_raw;
    rec Period_cap;
    rec Period_lim;

    rec Smooth;
    rec Detrender;
    rec I1;
    rec Q1;
    rec jI;
    rec jQ;
    rec I2;
    rec Q2;
    rec I2_raw;
    rec Q2_raw;

    rec Phase;
    rec DeltaPhase;
    rec DeltaPhase_raw;
    rec alpha;
    rec alpha_raw;

    rec Re;
    rec Im;
    rec Re_raw;
    rec Im_raw;

    rec SmoothPeriod;
    rec vmama;
    rec vfama;

    def CorrectionFactor = Phase_Accumulation(price).CorrectionFactor;

    if BarNumber() <= 5
    then {
        Smooth = 0;
        Detrender = 0;

        Period = 0;
        Period_raw = 0;
        Period_cap = 0;
        Period_lim = 0;
        I1 = 0;
        Q1 = 0;
        I2 = 0;
        Q2 = 0;
        jI = 0;
        jQ = 0;
        I2_raw = 0;
        Q2_raw = 0;
        Re = 0;
        Im = 0;
        Re_raw = 0;
        Im_raw = 0;
        SmoothPeriod = 0;
        Phase = 0;
        DeltaPhase = 0;
        DeltaPhase_raw = 0;
        alpha = 0;
        alpha_raw = 0;
        vmama = 0;
        vfama = 0;
    } else {
# Smooth and detrend my smoothed signal:
        Smooth = WMA_Smooth(price);
        Detrender = ( 0.0962 * Smooth
+ 0.5769 * Smooth[2]
- 0.5769 * Smooth[4]
- 0.0962 * Smooth[6] ) * CorrectionFactor;

        Q1 = ( 0.0962 * Detrender
+ 0.5769 * Detrender[2]
- 0.5769 * Detrender[4]
- 0.0962 * Detrender[6] ) * CorrectionFactor;
        I1 = Detrender[3];

        jI = ( 0.0962 * I1
+ 0.5769 * I1[2]
- 0.5769 * I1[4]
- 0.0962 * I1[6] ) * CorrectionFactor;

        jQ = ( 0.0962 * Q1
+ 0.5769 * Q1[2]
- 0.5769 * Q1[4]
- 0.0962 * Q1[6] ) * CorrectionFactor;

# This is the complex conjugate
        I2_raw = I1 - jQ;
        Q2_raw = Q1 + jI;

        I2 = 0.2 * I2_raw + 0.8 * I2_raw[1];
        Q2 = 0.2 * Q2_raw + 0.8 * Q2_raw[1];

        Re_raw = I2 * I2[1] + Q2 * Q2[1];
        Im_raw = I2 * Q2[1] - Q2 * I2[1];

        Re = 0.2 * Re_raw + 0.8 * Re_raw[1];
        Im = 0.2 * Im_raw + 0.8 * Im_raw[1];

# Compute the phase
        if Re != 0 and Im != 0
        then {
            Period_raw = 2 * Double.Pi / ATan(Im / Re);
        } else {
            Period_raw = 0;
        }

        if Period_raw > 1.5 * Period_raw[1]
        then {
            Period_cap = 1.5 * Period_raw[1];
        } else if Period_raw < 0.67 * Period_raw[1] {
            Period_cap = 0.67 * Period_raw[1];
        } else {
            Period_cap = Period_raw;
        }

        if Period_cap < 6
        then {
            Period_lim = 6;
        } else if Period_cap > 50
        then {
            Period_lim = 50;
        } else {
            Period_lim = Period_cap;
        }

        Period = 0.2 * Period_lim + 0.8 * Period_lim[1];
        SmoothPeriod = 0.33 * Period + 0.67 * SmoothPeriod[1];

        if I1 != 0
        then {
            Phase = ATan(Q1 / I1);
        } else if Q1 > 0
        then { # Quadrant 1:
            Phase = Double.Pi / 2;
        } else if Q1 < 0
        then { # Quadrant 4:
            Phase = -Double.Pi / 2;
        } else { # Both numerator and denominator are 0.
            Phase = 0;
        }

        DeltaPhase_raw = Phase[1] - Phase;
        if DeltaPhase_raw < 1
        then {
            DeltaPhase = 1;
        } else {
            DeltaPhase = DeltaPhase_raw;
        }

        alpha_raw = FastLimit / DeltaPhase;
        if alpha_raw < SlowLimit
        then {
            alpha = SlowLimit;
        } else {
            alpha = alpha_raw;
        }
        vmama = alpha * price + (1 - alpha) * vmama[1];
        vfama = 0.5 * alpha * vmama + (1 - 0.5 * alpha) * vfama[1];
    }

    plot MAMA = vmama;
    plot FAMA = vfama;
}


input price2 = hl2;
input FastLimit = 0.5;
input SlowLimit = 0.05;

def MAMA = Ehler_MAMA(price2, FastLimit, SlowLimit).MAMA;
def FAMA = Ehler_MAMA(price2, FastLimit, SlowLimit).FAMA;

def Crossing = Crosses((MAMA < FAMA), yes);
#Crossing.SetPaintingStrategy(PaintingStrategy.BOOLEAN_ARROW_UP);

def Crossing1 = Crosses((MAMA > FAMA), yes);
#Crossing1.SetPaintingStrategy(PaintingStrategy.BOOLEAN_ARROW_DOWN);

AddLabel(yes, Concat("MAMA: ", Concat("",
if MAMA > FAMA then "Bull" else "Bear")),

if MAMA > FAMA then Color.GREEN else Color.RED);

##################################
plot C3_MF_Line = (MAMA + FAMA) / 2;
C3_MF_Line.SetPaintingStrategy(PaintingStrategy.LINE);
C3_MF_Line.SetLineWeight(3);

def direction = if ConsensusR > Consensus_Bias then 1 else if ConsensusR < Consensus_Bias then -1 else 0;
C3_MF_Line.AssignValueColor(if paintCandles and ((direction == 1) and (price > C3_MF_Line)) then Color.GREEN else if paintCandles and ((direction == -1) and (price < C3_MF_Line)) then Color.RED else Color.GRAY);


plot buy = AvgExp crosses above AvgExp2;#direction crosses above 0;
buy.SetPaintingStrategy(PaintingStrategy.BOOLEAN_ARROW_UP);
buy.SetDefaultColor(Color.WHITE);

plot sell = AvgExp crosses below AvgExp2;#direction crosses below 0;
sell.SetPaintingStrategy(PaintingStrategy.BOOLEAN_ARROW_DOWN );
sell.SetDefaultColor(Color.WHITE);

AssignPriceColor(if paintCandles then if direction == 1 then Color.GREEN else if direction == -1 then Color.RED else Color.GRAY else Color.CURRENT);

AddLabel(yes, if (Spark == 3) then "SPARK UP = " + Round(Spark, 1) else if (Spark == 0) then  "SPARK DOWN = " + Round(Spark, 1) else "SPARK = " + Round(Spark, 1), if (Spark == 3) then Color.YELLOW else if ((Spark == 2) and (AvgExp > AvgExp2)) then Color.GREEN else if (Spark == 0) then Color.RED else Color.GRAY);

AddLabel(yes, if ((UP6 == 1) and (Consensus_Bias > 0)) then " SCALP_LONG " else if ((DOWN6) and (Consensus_Bias < 0)) then " SCALP_SHORT " else " CHOP ", if ((Consensus_Bias > 0) and (UP6 == 1)) then Color.GREEN else if ((Consensus_Bias < 0) and (DOWN6 == 1)) then Color.RED else Color.GRAY);

AddLabel(yes, if (ConsensusR > 0) then " LONG BIAS = %" + Round((ConsensusR / 14) * 100, 1) + " " else if (ConsensusR < 0) then  " SHORT BIAS = %" + Round(((ConsensusR * -1) / 14) * 100, 1) + " " else " CHOP =" + Round((ConsensusR / 14) * 100, 1) + " ", if (ConsensusR > 0) then Color.GREEN else if (ConsensusR < 0) then Color.RED else Color.GRAY);

Alert(direction crosses above 0, "long", Alert.BAR, Sound.DING);
Alert(direction crosses below 0, "short", Alert.BAR, Sound.DING);

#Strategy
def Long_Entry =  (ConsensusR crosses above Consensus_Bias);
def Long_Exit =  (ConsensusR crosses below Consensus_Bias);
AddOrder(OrderType.BUY_AUTO, condition = Long_Entry, price = open[-1], 1, tickcolor = GetColor(1), arrowcolor = Color.LIME, name = "LE");
AddOrder(OrderType.SELL_AUTO, condition = Long_Exit, price = open[-1], 1, tickcolor = GetColor(2), arrowcolor = Color.LIME, name = "SE");

Alert(Long_Entry, "long", Alert.BAR, Sound.DING);
Alert(Long_Exit, "short", Alert.BAR, Sound.DING);

And finally, here's the code for 1 hour charts. Hope you find these useful!

Code:

#Scalper Upper v2 Strategy Created 03/16/2022 by Christopher84

declare upper;

input price = close;
input length = 10;
input length2 = 35;
input agperiod1 = { "1 min", "2 min", "3 min", "5 min", "10 min", "15 min", "30 min", default "1 hour", "2 hours", "4 hours", "Day", "Week", "Month"};
input agperiod2 = {"1 min", "2 min", "3 min", "5 min", "10 min", "15 min", "30 min", "1 hour", default "2 hours", "4 hours", "Day", "Week", "Month"};
input agperiod3 = {"1 min", "2 min", "3 min", "5 min", "10 min", "15 min", "30 min", "1 hour", "2 hours", default "4 hours", "Day", "Week", "Month"};
input agperiod4 = {"1 min", "2 min", "3 min", "5 min", "10 min", "15 min", "30 min", "1 hour", "2 hours", "4 hours", default "Day", "Week", "Month"};
input agperiod5 = {"1 min", "2 min", "3 min", "5 min", "10 min", "15 min", "30 min", "1 hour", "2 hours", "4 hours", "Day", default "Week", "Month"};
input agperiod6 = {"1 min", "2 min", "3 min", "5 min", "10 min", "15 min", "30 min", "1 hour", "2 hours", "4 hours", "Day", "Week", default "Month"};
def displace = 0;
input paintCandles = yes;
input show_ema_cloud = yes;

#Current Period
plot AvgExp = ExpAverage(price[-displace], length);
AvgExp.SetStyle(Curve.SHORT_DASH);
def UPC1 = AvgExp > AvgExp[1];
def DNC1 = AvgExp < AvgExp[1];

plot AvgExp2 = ExpAverage(price[-displace], length2);
AvgExp2.SetStyle(Curve.SHORT_DASH);
def UPC2 = AvgExp2 > AvgExp2[1];
def DNC2 = AvgExp2 < AvgExp2[1];

def Below = AvgExp < AvgExp2;
def Spark = UPC1 + UPC2 + Below;

def UPEMA = AvgExp[1] < AvgExp;
def DOWNEMA = AvgExp[1] > AvgExp;
AvgExp.AssignValueColor(if UPEMA then Color.LIGHT_GREEN else if DOWNEMA then Color.RED else Color.YELLOW);

def UPEMA2 = AvgExp2[1] < AvgExp2;
def DOWNEMA2 = AvgExp2[1] > AvgExp2;
AvgExp2.AssignValueColor(if UPEMA2 then Color.LIGHT_GREEN else if DOWNEMA2 then Color.RED else Color.YELLOW);

AddCloud(if show_ema_cloud and (AvgExp2 > AvgExp) then AvgExp2 else Double.NaN, AvgExp, Color.LIGHT_RED, Color.CURRENT);
AddCloud(if show_ema_cloud and (AvgExp > AvgExp2) then AvgExp else Double.NaN, AvgExp2, Color.LIGHT_GREEN, Color.CURRENT);

#Agperiod1
def avg = ExpAverage(close(period = agperiod1), length);
def height = avg - avg[length];

def avg2 = ExpAverage(close(period = agperiod1), length2);
def height2 = avg2 - avg2[length2];

def UP = avg > avg2;
def DOWN = avg < avg2;

def R1UP = avg > avg[1];
def R1DN = avg < avg[1];
def R2UP = avg2 > avg2[1];
def R2DN = avg2 < avg2[1];

#Agperiod2
def avg3 = ExpAverage(close(period = agperiod2), length);
def height3 = avg3 - avg3[length];

def avg4 = ExpAverage(close(period = agperiod2), length2);
def height4 = avg4 - avg4[length2];

def UP2 = avg3 > avg4;
def DOWN2 = avg3 < avg4;

def R3UP = avg3 > avg3[1];
def R3DN = avg3 < avg3[1];
def R4UP = avg4 > avg4[1];
def R4DN = avg4 < avg4[1];

#Agperiod3
def avg5 = ExpAverage(close(period = agperiod3), length);
def height5 = avg5 - avg5[length];

def avg6 = ExpAverage(close(period = agperiod3), length2);
def height6 = avg6 - avg6[length2];

def UP3 = avg5 > avg6;
def DOWN3 = avg5 < avg6;

def R5UP = avg5 > avg5[1];
def R5DN = avg5 < avg5[1];
def R6UP = avg6 > avg6[1];
def R6DN = avg6 < avg6[1];

#Agperiod4
def avg7 = ExpAverage(close(period = agperiod4), length);
def height7 = avg7 - avg7[length];

def avg8 = ExpAverage(close(period = agperiod4), length2);
def height8 = avg8 - avg8[length2];

def UP4 = avg7 > avg8;
def DOWN4 = avg7 < avg8;

def R7UP = avg7 > avg7[1];
def R7DN = avg7 < avg7[1];
def R8UP = avg8 > avg8[1];
def R8DN = avg8 < avg8[1];

#Agperiod5
def avg9 = ExpAverage(close(period = agperiod5), length);
def height9 = avg9 - avg9[length];

def avg10 = ExpAverage(close(period = agperiod5), length2);
def height10 = avg10 - avg10[length2];

def UP5 = avg9 > avg10;
def DOWN5 = avg9 < avg10;

def R9UP = avg9 > avg9[1];
def R9DN = avg9 < avg9[1];
def R10UP = avg10 > avg10[1];
def R10DN = avg10 < avg10[1];

#Agperiod6
def avg11 = ExpAverage(close(period = agperiod6), length);
def height11 = avg11 - avg11[length];

def avg12 = ExpAverage(close(period = agperiod6), length2);
def height12 = avg12 - avg12[length2];

def UP6 = avg11 > avg12;
def DOWN6 = avg11 < avg12;

def R11UP = avg11 > avg11[1];
def R11DN = avg11 < avg11[1];
def R12UP = avg12 > avg12[1];
def R12DN = avg12 < avg12[1];

def Long_Only = UP + UP2 + UP3 + UP4 + UP5 + UP6;
def Short_Only = DOWN + DOWN2 + DOWN3 + DOWN4 + DOWN5 + DOWN6;
def Consensus_Bias = Long_Only - Short_Only;

def RUP = UPC1 + UPC2 + R1UP + R2UP + R3UP + R4UP + R5UP + R6UP + R7UP + R8UP + R9UP + R10UP + R11UP + R12UP;
def RDN = DNC1 + DNC2 + R1DN + R2DN + R3DN + R4DN + R5DN + R6DN + R7DN + R8DN + R9DN + R10DN + R11DN + R12DN;
def ConsensusR = RUP - RDN;

script WMA_Smooth {
    input price = hl2;
    plot smooth = (4 * price
+ 3 * price[1]
+ 2 * price[2]
+ price[3]) / 10;
}

script Phase_Accumulation {
# This is Ehler's Phase Accumulation code. It has a full cycle delay.
# However, it computes the correction factor to a very high degree.
#
    input price = hl2;

    rec Smooth;
    rec Detrender;
    rec Period;
    rec Q1;
    rec I1;
    rec I1p;
    rec Q1p;
    rec Phase1;
    rec Phase;
    rec DeltaPhase;
    rec DeltaPhase1;
    rec InstPeriod1;
    rec InstPeriod;
    def CorrectionFactor;

    if BarNumber() <= 5
    then {
        Period = 0;
        Smooth = 0;
        Detrender = 0;
        CorrectionFactor = 0;
        Q1 = 0;
        I1 = 0;
        Q1p = 0;
        I1p = 0;
        Phase = 0;
        Phase1 = 0;
        DeltaPhase1 = 0;
        DeltaPhase = 0;
        InstPeriod = 0;
        InstPeriod1 = 0;
    } else {
        CorrectionFactor = 0.075 * Period[1] + 0.54;

# Smooth and detrend my smoothed signal:
        Smooth = WMA_Smooth(price);
        Detrender = ( 0.0962 * Smooth
+ 0.5769 * Smooth[2]
- 0.5769 * Smooth[4]
- 0.0962 * Smooth[6] ) * CorrectionFactor;

# Compute Quadrature and Phase of Detrended signal:
        Q1p = ( 0.0962 * Detrender
+ 0.5769 * Detrender[2]
- 0.5769 * Detrender[4]
- 0.0962 * Detrender[6] ) * CorrectionFactor;
        I1p = Detrender[3];

# Smooth out Quadrature and Phase:
        I1 = 0.15 * I1p + 0.85 * I1p[1];
        Q1 = 0.15 * Q1p + 0.85 * Q1p[1];

# Determine Phase
        if I1 != 0
        then {
# Normally, ATAN gives results from -pi/2 to pi/2.
# We need to map this to circular coordinates 0 to 2pi

            if Q1 >= 0 and I1 > 0
            then { # Quarant 1
                Phase1 = ATan(AbsValue(Q1 / I1));
            } else if Q1 >= 0 and I1 < 0
            then { # Quadrant 2
                Phase1 = Double.Pi - ATan(AbsValue(Q1 / I1));
            } else if Q1 < 0 and I1 < 0
            then { # Quadrant 3
                Phase1 = Double.Pi + ATan(AbsValue(Q1 / I1));
            } else { # Quadrant 4
                Phase1 = 2 * Double.Pi - ATan(AbsValue(Q1 / I1));
            }
        } else if Q1 > 0
        then { # I1 == 0, Q1 is positive
            Phase1 = Double.Pi / 2;
        } else if Q1 < 0
        then { # I1 == 0, Q1 is negative
            Phase1 = 3 * Double.Pi / 2;
        } else { # I1 and Q1 == 0
            Phase1 = 0;
        }

# Convert phase to degrees
        Phase = Phase1 * 180 / Double.Pi;

        if Phase[1] < 90 and Phase > 270
        then {
# This occurs when there is a big jump from 360-0
            DeltaPhase1 = 360 + Phase[1] - Phase;
        } else {
            DeltaPhase1 = Phase[1] - Phase;
        }

# Limit our delta phases between 7 and 60
        if DeltaPhase1 < 7
        then {
            DeltaPhase = 7;
        } else if DeltaPhase1 > 60
        then {
            DeltaPhase = 60;
        } else {
            DeltaPhase = DeltaPhase1;
        }

# Determine Instantaneous period:
        InstPeriod1 =
-1 * (fold i = 0 to 40 with v=0 do
if v < 0 then
v
else if v > 360 then
-i
else
v + GetValue(DeltaPhase, i, 41)
);

        if InstPeriod1 <= 0
        then {
            InstPeriod = InstPeriod[1];
        } else {
            InstPeriod = InstPeriod1;
        }

        Period = 0.25 * InstPeriod + 0.75 * Period[1];
    }
    plot DC = Period;
}

script Ehler_MAMA {
    input price = hl2;
    input FastLimit = 0.5;
    input SlowLimit = 0.05;


    rec Period;
    rec Period_raw;
    rec Period_cap;
    rec Period_lim;

    rec Smooth;
    rec Detrender;
    rec I1;
    rec Q1;
    rec jI;
    rec jQ;
    rec I2;
    rec Q2;
    rec I2_raw;
    rec Q2_raw;

    rec Phase;
    rec DeltaPhase;
    rec DeltaPhase_raw;
    rec alpha;
    rec alpha_raw;

    rec Re;
    rec Im;
    rec Re_raw;
    rec Im_raw;

    rec SmoothPeriod;
    rec vmama;
    rec vfama;

    def CorrectionFactor = Phase_Accumulation(price).CorrectionFactor;

    if BarNumber() <= 5
    then {
        Smooth = 0;
        Detrender = 0;

        Period = 0;
        Period_raw = 0;
        Period_cap = 0;
        Period_lim = 0;
        I1 = 0;
        Q1 = 0;
        I2 = 0;
        Q2 = 0;
        jI = 0;
        jQ = 0;
        I2_raw = 0;
        Q2_raw = 0;
        Re = 0;
        Im = 0;
        Re_raw = 0;
        Im_raw = 0;
        SmoothPeriod = 0;
        Phase = 0;
        DeltaPhase = 0;
        DeltaPhase_raw = 0;
        alpha = 0;
        alpha_raw = 0;
        vmama = 0;
        vfama = 0;
    } else {
# Smooth and detrend my smoothed signal:
        Smooth = WMA_Smooth(price);
        Detrender = ( 0.0962 * Smooth
+ 0.5769 * Smooth[2]
- 0.5769 * Smooth[4]
- 0.0962 * Smooth[6] ) * CorrectionFactor;

        Q1 = ( 0.0962 * Detrender
+ 0.5769 * Detrender[2]
- 0.5769 * Detrender[4]
- 0.0962 * Detrender[6] ) * CorrectionFactor;
        I1 = Detrender[3];

        jI = ( 0.0962 * I1
+ 0.5769 * I1[2]
- 0.5769 * I1[4]
- 0.0962 * I1[6] ) * CorrectionFactor;

        jQ = ( 0.0962 * Q1
+ 0.5769 * Q1[2]
- 0.5769 * Q1[4]
- 0.0962 * Q1[6] ) * CorrectionFactor;

# This is the complex conjugate
        I2_raw = I1 - jQ;
        Q2_raw = Q1 + jI;

        I2 = 0.2 * I2_raw + 0.8 * I2_raw[1];
        Q2 = 0.2 * Q2_raw + 0.8 * Q2_raw[1];

        Re_raw = I2 * I2[1] + Q2 * Q2[1];
        Im_raw = I2 * Q2[1] - Q2 * I2[1];

        Re = 0.2 * Re_raw + 0.8 * Re_raw[1];
        Im = 0.2 * Im_raw + 0.8 * Im_raw[1];

# Compute the phase
        if Re != 0 and Im != 0
        then {
            Period_raw = 2 * Double.Pi / ATan(Im / Re);
        } else {
            Period_raw = 0;
        }

        if Period_raw > 1.5 * Period_raw[1]
        then {
            Period_cap = 1.5 * Period_raw[1];
        } else if Period_raw < 0.67 * Period_raw[1] {
            Period_cap = 0.67 * Period_raw[1];
        } else {
            Period_cap = Period_raw;
        }

        if Period_cap < 6
        then {
            Period_lim = 6;
        } else if Period_cap > 50
        then {
            Period_lim = 50;
        } else {
            Period_lim = Period_cap;
        }

        Period = 0.2 * Period_lim + 0.8 * Period_lim[1];
        SmoothPeriod = 0.33 * Period + 0.67 * SmoothPeriod[1];

        if I1 != 0
        then {
            Phase = ATan(Q1 / I1);
        } else if Q1 > 0
        then { # Quadrant 1:
            Phase = Double.Pi / 2;
        } else if Q1 < 0
        then { # Quadrant 4:
            Phase = -Double.Pi / 2;
        } else { # Both numerator and denominator are 0.
            Phase = 0;
        }

        DeltaPhase_raw = Phase[1] - Phase;
        if DeltaPhase_raw < 1
        then {
            DeltaPhase = 1;
        } else {
            DeltaPhase = DeltaPhase_raw;
        }

        alpha_raw = FastLimit / DeltaPhase;
        if alpha_raw < SlowLimit
        then {
            alpha = SlowLimit;
        } else {
            alpha = alpha_raw;
        }
        vmama = alpha * price + (1 - alpha) * vmama[1];
        vfama = 0.5 * alpha * vmama + (1 - 0.5 * alpha) * vfama[1];
    }

    plot MAMA = vmama;
    plot FAMA = vfama;
}


input price2 = hl2;
input FastLimit = 0.5;
input SlowLimit = 0.05;

def MAMA = Ehler_MAMA(price2, FastLimit, SlowLimit).MAMA;
def FAMA = Ehler_MAMA(price2, FastLimit, SlowLimit).FAMA;

def Crossing = Crosses((MAMA < FAMA), yes);
#Crossing.SetPaintingStrategy(PaintingStrategy.BOOLEAN_ARROW_UP);

def Crossing1 = Crosses((MAMA > FAMA), yes);
#Crossing1.SetPaintingStrategy(PaintingStrategy.BOOLEAN_ARROW_DOWN);

AddLabel(yes, Concat("MAMA: ", Concat("",
if MAMA > FAMA then "Bull" else "Bear")),

if MAMA > FAMA then Color.GREEN else Color.RED);

##################################
plot C3_MF_Line = (MAMA + FAMA) / 2;
C3_MF_Line.SetPaintingStrategy(PaintingStrategy.LINE);
C3_MF_Line.SetLineWeight(3);

def direction = if ConsensusR > Consensus_Bias then 1 else if ConsensusR < Consensus_Bias then -1 else 0;
C3_MF_Line.AssignValueColor(if paintCandles and ((direction == 1) and (price > C3_MF_Line)) then Color.GREEN else if paintCandles and ((direction == -1) and (price < C3_MF_Line)) then Color.RED else Color.GRAY);


plot buy = AvgExp crosses above AvgExp2;#direction crosses above 0;
buy.SetPaintingStrategy(PaintingStrategy.BOOLEAN_ARROW_UP);
buy.SetDefaultColor(Color.WHITE);

plot sell = AvgExp crosses below AvgExp2;#direction crosses below 0;
sell.SetPaintingStrategy(PaintingStrategy.BOOLEAN_ARROW_DOWN );
sell.SetDefaultColor(Color.WHITE);

AssignPriceColor(if paintCandles then if direction == 1 then Color.GREEN else if direction == -1 then Color.RED else Color.GRAY else Color.CURRENT);

AddLabel(yes, if (Spark == 3) then "SPARK UP = " + Round(Spark, 1) else if (Spark == 0) then  "SPARK DOWN = " + Round(Spark, 1) else "SPARK = " + Round(Spark, 1), if (Spark == 3) then Color.YELLOW else if ((Spark == 2) and (AvgExp > AvgExp2)) then Color.GREEN else if (Spark == 0) then Color.RED else Color.GRAY);

AddLabel(yes, if ((UP6 == 1) and (Consensus_Bias > 0)) then " SCALP_LONG " else if ((DOWN6) and (Consensus_Bias < 0)) then " SCALP_SHORT " else " CHOP ", if ((Consensus_Bias > 0) and (UP6 == 1)) then Color.GREEN else if ((Consensus_Bias < 0) and (DOWN6 == 1)) then Color.RED else Color.GRAY);

AddLabel(yes, if (ConsensusR > 0) then " LONG BIAS = %" + Round((ConsensusR / 14) * 100, 1) + " " else if (ConsensusR < 0) then  " SHORT BIAS = %" + Round(((ConsensusR * -1) / 14) * 100, 1) + " " else " CHOP =" + Round((ConsensusR / 14) * 100, 1) + " ", if (ConsensusR > 0) then Color.GREEN else if (ConsensusR < 0) then Color.RED else Color.GRAY);

Alert(direction crosses above 0, "long", Alert.BAR, Sound.DING);
Alert(direction crosses below 0, "short", Alert.BAR, Sound.DING);

#Strategy
def Long_Entry =  (ConsensusR crosses above Consensus_Bias);
def Long_Exit =  (ConsensusR crosses below Consensus_Bias);
AddOrder(OrderType.BUY_AUTO, condition = Long_Entry, price = open[-1], 1, tickcolor = GetColor(1), arrowcolor = Color.LIME, name = "LE");
AddOrder(OrderType.SELL_AUTO, condition = Long_Exit, price = open[-1], 1, tickcolor = GetColor(2), arrowcolor = Color.LIME, name = "SE");

Alert(Long_Entry, "long", Alert.BAR, Sound.DING);
Alert(Long_Exit, "short", Alert.BAR, Sound.DING);

Thanks very much. This is great.

Christopher84 · Mar 16, 2022

10 min strategy for the /ES (posted on pg.1 of this thread) is still performing very well. Nice long entry yesterday followed by the short entry this afternoon.

Falout · Mar 16, 2022

Christopher84 said:
1 min chart 5 days with the new Scalper Strategy 1 share on the /ES....very interesting. Watching this strategy carefully.

Could you post a share link to your chart here. Not sure what I am doing different. For me your study does awesome on a 10 minute chart but mine is completely different when I change to a 1 minute chart.

Christopher84 · Mar 16, 2022

Falout said:
Could you post a share link to your chart here. Not sure what I am doing different. For me your study does awesome on a 10 minute chart but mine is completely different when I change to a 1 minute chart.

Hey @Falout,
Try this out https://tos.mx/d2dcYNv. Let me know if that fixes it.

Falout · Mar 16, 2022

Christopher84 said:
Hey @Falout,
Try this out https://tos.mx/d2dcYNv. Let me know if that fixes it.

Awesome. I did not realize you were using the c3Max and the scalper. that fixed it. Thank you sir.

FOTM_8888 · Mar 16, 2022

Falout said:
Awesome. I did not realize you were using the c3Max and the scalper. that fixed it. Thank you sir.

is the strategies repaint? nice job

Christopher84 · Mar 16, 2022

FOTM_8888 said:
is the strategies repaint? nice job

Hi @FOTM_8888!
They are based on my Scalper indicator which utilizes MTF. It can repaint until the highest agperiod closes. However, it seems to play fairly true so far (I just wrote the strategy this morning though).

Christopher84 · Mar 16, 2022

Look at the YCOS and YCOB levels on the 1 min chart. Really nice support and resistance levels.

Falout · Mar 16, 2022

FOTM_8888 said:
is the strategies repaint? nice job

It does. Cant be avoided since its multi time frame I think. I have been using it to see the longer term trend on all the different time frames. Works great for me to see the overall direction when scalping.

Christopher84 · Mar 16, 2022

Falout said:
It does. Cant be avoided since its multi time frame I think. I have been using it to see the longer term trend on all the different time frames. Works great for me to see the overall direction when scalping.

The signals today were excellent on the 1 min chart. I was truly impressed with how this trades. Thanks for the suggestion @Falout!

Falout · Mar 16, 2022

Christopher84 said:
The signals today were excellent on the 1 min chart. I was truly impressed with how this trades. Thanks for the suggestion @Falout!

Seems to do just fine with after hours turned on. This scalper really takes a lot of the stress out of wondering if your on the right side of the trade or not. I appreciate all your work.

30 day 1 minute haha.

Christopher84 · Mar 16, 2022

Christopher84 said:
Look at the YCOS and YCOB levels on the 1 min chart. Really nice support and resistance levels.

irishgold · Mar 16, 2022

@Christopher84 , on the repaint is it the kind that flashes on screen than off as the candle is forming or is it the kind that reappears and adjusts as the strategy gets more data?

petergluis · Mar 16, 2022

irishgold said:
@Christopher84 , on the repaint is it the kind that flashes on screen than off as the candle is forming or is it the kind that reappears and adjusts as the strategy gets more data?

petergluis · Mar 16, 2022

I would like to know how to use a lower indicator above, and why it keeps green colors.

FOTM_8888 · Mar 16, 2022

@Christopher84 great job!! a quick question how can i HIDE the red box above an the green box in the bottom.

Christopher84 · Mar 16, 2022

irishgold said:
@Christopher84 , on the repaint is it the kind that flashes on screen than off as the candle is forming or is it the kind that reappears and adjusts as the strategy gets more data?

Hard to say. I didn’t see any entries or exits repaint on the 1 min chart today. I did see one short entry fail to plot. None of them repainted. It also shouldn’t repaint after the candle for the day has closed. That being said, I was extremely impressed with it today. $8k trading 1 share in 1 day isn’t bad.

Falout · Mar 16, 2022

petergluis said:
I would like to know how to use a lower indicator above, and why it keeps green colors.

On this chart its not even really a indicator. It is a continuing profit and loss that starts at the beginning of the chart. The upper chart is being run as a strategy versus just being a study. You can right click on the smaller sideways arrows to say show strategy reports.

Thread starter	Similar threads	Forum	Replies	Date
R	Confirmation Candle with Key Level and Weighted Paintbars Chart Setup For ThinkOrSwim	Strategies & Chart Setups	8	Jun 12, 2023
	The Confirmation Trend Chart Setup \| The End All Be All \| For ThinkOrSwim	Strategies & Chart Setups	279	Apr 22, 2023
	DEMA Crossover with Heikin-Ashi Candle Confirmation for ThinkorSwim	Strategies & Chart Setups	64	Jun 11, 2019
	Repaints NSDT HAMA Candles + SSL Channel For ThinkOrSwim	Strategies & Chart Setups	59	Jul 11, 2022
	Repaints MTF Incredible Hulk Indicator For ThinkOrSwim	Strategies & Chart Setups	8	Oct 26, 2023

Confirmation Candles Indicator For ThinkorSwim

Member

New member

Member

Well-known member

Member

Well-known member

Member

Active member

Well-known member

Well-known member

Member

Well-known member

Member

Well-known member

Active member

Active member

Active member

Active member

Well-known member

Member

Similar threads

Not the exact question you're looking for?

Similar threads

Similar threads

The Market Trading Game Changer

Frequently Asked Questions