Triple Exhaustion Indicator For ThinkOrSwim

[Thomas]

HELP,...what I don't understand is this count???? What are correct settings?

 

[Thomas]

This signal on a daily chart of BA, was perfect, an attention, signal, follow through entry.....no other candles have signaled one BIG short. Then it's up to you to understand how to read price adding to short at resistance

 

[cos251]

HELP,...what I don't understand is this count???? What are correct settings?

You'll want to lower this to near 400 if you are using Daily chart or increase the amount of time you have loaded on the chart. Just needs enough data to do the calculation.

 

[Thomas]

You'll want to lower this to near 400 if you are using Daily chart or increase the amount of time you have loaded on the chart. Just needs enough data to do the calculation.

OK, I dropped it to 126, I assume these are lookback bars,.....I honestly don't trade the signals, price only, but interesting to have this pop up at same instant....there are far more signals on daily chart than previously....very good, clear signals.....

 

[Babaji Ka Thullu]

Awesome indicator @Chence27 .... Have been using this for few weeks now. Great reliable signals.... Many thanks for sharing. Wishing you greater success....

 

[lolreconlol]

Awesome indicator @Chence27 .... Have been using this for few weeks now. Great reliable signals.... Many thanks for sharing. Wishing you greater success....

What timeframe do you typically use?

 

[Babaji Ka Thullu]

What timeframe do you typically use?

I generally use 15M, 1H, and 1D.... 15m primarily for entry exit guidance

 

[lolreconlol]

I generally use 15M, 1H, and 1D.... 15m primarily for entry exit guidance

Thanks! I will have to zoom out a bit and try.. typically I use it on the 5 minute chart and I get a ton of signals.. I will try it on 15M/1H. Thank you!

 

[Babaji Ka Thullu]

Thanks! I will have to zoom out a bit and try.. typically I use it on the 5 minute chart and I get a ton of signals.. I will try it on 15M/1H. Thank you!

I think that is more or less a given.... shorter time frame -> more signals/shorter term reliability .... Longer time frame -> fewer signals/comparatively longer term reliability....

 

[DDW]

I find it best to use the lower time frames like the 3 or 5 min to pinpoint the entry, but I look to the longer frames to find the trades

 

[autoloader]

Check to see if all criteria was coded as you indicated. Hopefully this is what you were looking for.

Triple Exhaustion Indicator

## Triple Exhaustion Indicator
##
##
## CREDITS
## Requested by @Chence27 from criteria listed here https://usethinkscript.com/threads/triple-exhaustion-indicator.9001/
##
##
## Removing the header Credit credits and description is not permitted, any modification needs to be shared.
##
## V 1.0 :    @cos251 - Initial release per request from www.usethinkscript.com forum thread:
##       :    https://usethinkscript.com/threads/triple-exhaustion-indicator.9001/
##
##
##

declare upper;

# --- Inputs
input over_bought = 80;
input over_sold = 20;
input KPeriod = 10;
input DPeriod = 10;
input priceH = high;
input priceL = low;
input priceC = close;
input averageType = AverageType.SIMPLE;
input length = 1000;
input paintBars = yes;
input showLabels = yes;


# --- Indicators - StochasticSlow / MACD / MACD StDev / DMI+/-
def SlowK = reference StochasticFull(over_bought, over_sold, KPeriod, DPeriod, priceH, priceL, priceC, 3, averageType).FullK;
def MACD = reference MACD()."Value";
def priceMean = Average(MACD, length);
def MACD_stdev =  (MACD - priceMean) / StDev(MACD, length);
def dPlus = reference DMI()."DI+";
def dMinus = reference DMI()."DI-";
# --- End Indicators

# --- Conditions
def sellerRegular = SlowK < 20 and MACD_stdev < -1 and dPlus < 15;
def sellerExtreme = SlowK < 20 and MACD_stdev < -2 and dPlus < 15;
def buyerRegular = SlowK > 80 and MACD_stdev > 1 and dMinus < 15;
def buyerExtreme = SlowK > 80 and MACD_stdev > 2 and dMinus < 15;
# --- End Conditions

# -- Price Color
AssignPriceColor( if paintBars and sellerExtreme then Color.CYAN else if buyerExtreme and paintBars then Color.GREEN else if paintBars and sellerRegular then Color.YELLOW else if buyerRegular and paintBars then Color.DARK_GREEN else if paintBars then Color.GRAY else Color.Current);

# --- Arrows/Triggers
plot RegularBuy = if sellerRegular[1] and !sellerRegular then low else Double.NaN;
plot ExtremeBuy = if sellerExtreme[1] and !sellerExtreme then low else Double.NaN;
RegularBuy.SetPaintingStrategy(PaintingSTrategy.ARROW_UP);
ExtremeBuy.SetPaintingSTrategy(paintingSTrategy.Arrow_UP);
RegularBuy.SetDefaultColor(Color.LIME);
ExtremeBuy.SetDefaultColor(Color.GREEN);

plot RegularSell = if buyerRegular[1] and !buyerRegular then high else Double.NaN;
plot ExtremeSell = if buyerExtreme[1] and !buyerExtreme then high else Double.NaN;
RegularSell.SetPaintingStrategy(PaintingSTrategy.ARROW_Down);
ExtremeSell.SetPaintingSTrategy(paintingSTrategy.Arrow_DOWN);
RegularSell.SetDefaultColor(Color.Light_RED);
ExtremeSell.SetDefaultColor(Color.RED);

# --- Labels
AddLabel(showLabels,"SellerRegular",Color.YELLOW);
AddLabel(showLabels,"SellerExtreme",Color.CYAN);
AddLabel(showLabels,"BuyerRegular",Color.DARK_GREEN);
AddLabel(showLabels,"BuyerExtreme",Color.GREEN);

Triple Exhaustion Indicator SCAN (Scanner)

## Triple Exhaustion Indicator SCAN
##
##
## CREDITS
## Requested by @Chence27 from criteria listed here https://usethinkscript.com/threads/triple-exhaustion-indicator.9001/
## SCAN requested by @Trader_Andrew
##
## Removing the header Credit credits and description is not permitted, any modification needs to be shared.
##
## V 1.0 :    @cos251 - Initial release per request from www.usethinkscript.com forum thread:
##       :    https://usethinkscript.com/threads/triple-exhaustion-indicator.9001/
##       :    SCAN version requested by @Trader_Andrew
##
##
##


# --- Inputs
input over_bought = 80;
input over_sold = 20;
input KPeriod = 10;
input DPeriod = 10;
input priceH = high;
input priceL = low;
input priceC = close;
input averageType = AverageType.SIMPLE;
input length = 1000;
input paintBars = yes;
input showLabels = yes;


# --- Indicators - StochasticSlow / MACD / MACD StDev / DMI+/-
def SlowK = reference StochasticFull(over_bought, over_sold, KPeriod, DPeriod, priceH, priceL, priceC, 3, averageType).FullK;
def MACD = reference MACD()."Value";
def priceMean = Average(MACD, length);
def MACD_stdev =  (MACD - priceMean) / StDev(MACD, length);
def dPlus = reference DMI()."DI+";
def dMinus = reference DMI()."DI-";
# --- End Indicators

# --- Conditions
def sellerRegular = SlowK < 20 and MACD_stdev < -1 and dPlus < 15;
def buyerRegular = SlowK > 80 and MACD_stdev > 1 and dMinus < 15;
# --- End Conditions

# --- Arrows/Triggers
plot RegularBuyArrow = if sellerRegular[1] and !sellerRegular then 1 else Double.NaN;
plot RegularSellArrow = if buyerRegular[1] and !buyerRegular then 1 else Double.NaN;
plot RegularBuyTrendExists = if sellerRegular then 1 else Double.NaN;
plot RegularSellTrendExists = if buyerRegular then 1 else Double.NaN;

How do I get this scan to include the last 5 bars?

 

[BKK]

Check to see if all criteria was coded as you indicated. Hopefully this is what you were looking for.

Triple Exhaustion Indicator

## Triple Exhaustion Indicator
##
##
## CREDITS
## Requested by @Chence27 from criteria listed here https://usethinkscript.com/threads/triple-exhaustion-indicator.9001/
##
##
## Removing the header Credit credits and description is not permitted, any modification needs to be shared.
##
## V 1.0 :    @cos251 - Initial release per request from www.usethinkscript.com forum thread:
##       :    https://usethinkscript.com/threads/triple-exhaustion-indicator.9001/
##
##
##

declare upper;

# --- Inputs
input over_bought = 80;
input over_sold = 20;
input KPeriod = 10;
input DPeriod = 10;
input priceH = high;
input priceL = low;
input priceC = close;
input averageType = AverageType.SIMPLE;
input length = 1000;
input paintBars = yes;
input showLabels = yes;


# --- Indicators - StochasticSlow / MACD / MACD StDev / DMI+/-
def SlowK = reference StochasticFull(over_bought, over_sold, KPeriod, DPeriod, priceH, priceL, priceC, 3, averageType).FullK;
def MACD = reference MACD()."Value";
def priceMean = Average(MACD, length);
def MACD_stdev =  (MACD - priceMean) / StDev(MACD, length);
def dPlus = reference DMI()."DI+";
def dMinus = reference DMI()."DI-";
# --- End Indicators

# --- Conditions
def sellerRegular = SlowK < 20 and MACD_stdev < -1 and dPlus < 15;
def sellerExtreme = SlowK < 20 and MACD_stdev < -2 and dPlus < 15;
def buyerRegular = SlowK > 80 and MACD_stdev > 1 and dMinus < 15;
def buyerExtreme = SlowK > 80 and MACD_stdev > 2 and dMinus < 15;
# --- End Conditions

# -- Price Color
AssignPriceColor( if paintBars and sellerExtreme then Color.CYAN else if buyerExtreme and paintBars then Color.GREEN else if paintBars and sellerRegular then Color.YELLOW else if buyerRegular and paintBars then Color.DARK_GREEN else if paintBars then Color.GRAY else Color.Current);

# --- Arrows/Triggers
plot RegularBuy = if sellerRegular[1] and !sellerRegular then low else Double.NaN;
plot ExtremeBuy = if sellerExtreme[1] and !sellerExtreme then low else Double.NaN;
RegularBuy.SetPaintingStrategy(PaintingSTrategy.ARROW_UP);
ExtremeBuy.SetPaintingSTrategy(paintingSTrategy.Arrow_UP);
RegularBuy.SetDefaultColor(Color.LIME);
ExtremeBuy.SetDefaultColor(Color.GREEN);

plot RegularSell = if buyerRegular[1] and !buyerRegular then high else Double.NaN;
plot ExtremeSell = if buyerExtreme[1] and !buyerExtreme then high else Double.NaN;
RegularSell.SetPaintingStrategy(PaintingSTrategy.ARROW_Down);
ExtremeSell.SetPaintingSTrategy(paintingSTrategy.Arrow_DOWN);
RegularSell.SetDefaultColor(Color.Light_RED);
ExtremeSell.SetDefaultColor(Color.RED);

# --- Labels
AddLabel(showLabels,"SellerRegular",Color.YELLOW);
AddLabel(showLabels,"SellerExtreme",Color.CYAN);
AddLabel(showLabels,"BuyerRegular",Color.DARK_GREEN);
AddLabel(showLabels,"BuyerExtreme",Color.GREEN);

Triple Exhaustion Indicator SCAN (Scanner)

## Triple Exhaustion Indicator SCAN
##
##
## CREDITS
## Requested by @Chence27 from criteria listed here https://usethinkscript.com/threads/triple-exhaustion-indicator.9001/
## SCAN requested by @Trader_Andrew
##
## Removing the header Credit credits and description is not permitted, any modification needs to be shared.
##
## V 1.0 :    @cos251 - Initial release per request from www.usethinkscript.com forum thread:
##       :    https://usethinkscript.com/threads/triple-exhaustion-indicator.9001/
##       :    SCAN version requested by @Trader_Andrew
##
##
##


# --- Inputs
input over_bought = 80;
input over_sold = 20;
input KPeriod = 10;
input DPeriod = 10;
input priceH = high;
input priceL = low;
input priceC = close;
input averageType = AverageType.SIMPLE;
input length = 1000;
input paintBars = yes;
input showLabels = yes;


# --- Indicators - StochasticSlow / MACD / MACD StDev / DMI+/-
def SlowK = reference StochasticFull(over_bought, over_sold, KPeriod, DPeriod, priceH, priceL, priceC, 3, averageType).FullK;
def MACD = reference MACD()."Value";
def priceMean = Average(MACD, length);
def MACD_stdev =  (MACD - priceMean) / StDev(MACD, length);
def dPlus = reference DMI()."DI+";
def dMinus = reference DMI()."DI-";
# --- End Indicators

# --- Conditions
def sellerRegular = SlowK < 20 and MACD_stdev < -1 and dPlus < 15;
def buyerRegular = SlowK > 80 and MACD_stdev > 1 and dMinus < 15;
# --- End Conditions

# --- Arrows/Triggers
plot RegularBuyArrow = if sellerRegular[1] and !sellerRegular then 1 else Double.NaN;
plot RegularSellArrow = if buyerRegular[1] and !buyerRegular then 1 else Double.NaN;
plot RegularBuyTrendExists = if sellerRegular then 1 else Double.NaN;
plot RegularSellTrendExists = if buyerRegular then 1 else Double.NaN;

Your scanner says error in TOS. Can you instead share study layout...Thank you

 

[Thomas]

How do I get this scan to include the last 5 bars?

Try this.... http://tos.mx/kLqwubS
Also helps to read price,......
Adjust: input length 1000, make it 126 or 89......

 

[MerryDay]

How do I get this scan to include the last 5 bars?

Your scanner says error in TOS. Can you instead share study layout...Thank you

Edited @Thomas's post to include the last 5 bars:
Shared Scan Link: http://tos.mx/90D5NcI Click here for --> Easiest way to load shared links

 

[BKK]

Edited @Thomas's post to include the last 5 bars:
Shared Scan Link: http://tos.mx/90D5NcI Click here for --> Easiest way to load shared links

Thank you. I appreciate. Now its working..

 

[sean1970ss]

This is a great indicator by far one of the best I have used.

 

[Sd_hunter]

I created a WL Column for this. I'm like an extreme rookie with all this coding stuff & I know a lot are going to shake their heads when they look at this lol. It does appear to work, I have no idea why lol, maybe someone can improve it. Also a heads up I haven't tested it live yet
Anyways here is the link if anyone wants to look at it lol, http://tos.mx/dTC3PFN
To get rid of the Orange ! you just need to reduce input to 1000. Also if any show up as NaN is because the input is too high.

 

[zeek]

Can anyone help me add a chart label that displays a secondary higher aggregation and is color coded based on how the candles are painted on that higher timeframe?

 

[MerryDay]

Can anyone help me add a chart label that displays a secondary higher aggregation and is color coded based on how the candles are painted on that higher timeframe?

https://usethinkscript.com/threads/converting-indicator-to-multi-timeframe-mtf-in-thinkorswim.8050/

 

[lolreconlol]

Anyone have any good wins lately using this?