Confirmation Candles Indicator For ThinkorSwim

[Christopher84]

@Christopher84 Hope your doing good. I use the Scalper Strategy more than anything else just by itself. Is it possible to add profit and loss bubbles to the scalper like you have in your new TS Strategy? This is the code you shared in message #1,106

#Scalper Upper v2 Strategy Created 03/16/2022 by Christopher84

declare upper;

input price = close;
input length = 10;
input length2 = 35;
input agperiod1 = { "1 min", default "2 min", "3 min", "5 min", "10 min", "15 min", "30 min", "1 hour", "2 hours", "4 hours", "Day", "Week", "Month"};
input agperiod2 = {"1 min", "2 min", default "3 min", "5 min", "10 min", "15 min", "30 min", "1 hour", "2 hours", "4 hours", "Day", "Week", "Month"};
input agperiod3 = {"1 min", "2 min", "3 min", "5 min", default "10 min", "15 min", "30 min", "1 hour", "2 hours", "4 hours", "Day", "Week", "Month"};
input agperiod4 = {"1 min", "2 min", "3 min", "5 min", "10 min", "15 min", default "30 min", "1 hour", "2 hours", "4 hours", "Day", "Week", "Month"};
input agperiod5 = {"1 min", "2 min", "3 min", "5 min", "10 min", "15 min", "30 min", "1 hour", "2 hours", default "4 hours", "Day", "Week", "Month"};
input agperiod6 = {"1 min", "2 min", "3 min", "5 min", "10 min", "15 min", "30 min", "1 hour", "2 hours", "4 hours", default "Day", "Week", "Month"};
def displace = 0;
input paintCandles = yes;
input show_ema_cloud = yes;

#Current Period
plot AvgExp = ExpAverage(price[-displace], length);
AvgExp.SetStyle(Curve.SHORT_DASH);
def UPC1 = AvgExp > AvgExp[1];
def DNC1 = AvgExp < AvgExp[1];

plot AvgExp2 = ExpAverage(price[-displace], length2);
AvgExp2.SetStyle(Curve.SHORT_DASH);
def UPC2 = AvgExp2 > AvgExp2[1];
def DNC2 = AvgExp2 < AvgExp2[1];

def Below = AvgExp < AvgExp2;
def Spark = UPC1 + UPC2 + Below;

def UPEMA = AvgExp[1] < AvgExp;
def DOWNEMA = AvgExp[1] > AvgExp;
AvgExp.AssignValueColor(if UPEMA then Color.LIGHT_GREEN else if DOWNEMA then Color.RED else Color.YELLOW);

def UPEMA2 = AvgExp2[1] < AvgExp2;
def DOWNEMA2 = AvgExp2[1] > AvgExp2;
AvgExp2.AssignValueColor(if UPEMA2 then Color.LIGHT_GREEN else if DOWNEMA2 then Color.RED else Color.YELLOW);

AddCloud(if show_ema_cloud and (AvgExp2 > AvgExp) then AvgExp2 else Double.NaN, AvgExp, Color.LIGHT_RED, Color.CURRENT);
AddCloud(if show_ema_cloud and (AvgExp > AvgExp2) then AvgExp else Double.NaN, AvgExp2, Color.LIGHT_GREEN, Color.CURRENT);

#Agperiod1
def avg = ExpAverage(close(period = agperiod1), length);
def height = avg - avg[length];

def avg2 = ExpAverage(close(period = agperiod1), length2);
def height2 = avg2 - avg2[length2];

def UP = avg > avg2;
def DOWN = avg < avg2;

def R1UP = avg > avg[1];
def R1DN = avg < avg[1];
def R2UP = avg2 > avg2[1];
def R2DN = avg2 < avg2[1];

#Agperiod2
def avg3 = ExpAverage(close(period = agperiod2), length);
def height3 = avg3 - avg3[length];

def avg4 = ExpAverage(close(period = agperiod2), length2);
def height4 = avg4 - avg4[length2];

def UP2 = avg3 > avg4;
def DOWN2 = avg3 < avg4;

def R3UP = avg3 > avg3[1];
def R3DN = avg3 < avg3[1];
def R4UP = avg4 > avg4[1];
def R4DN = avg4 < avg4[1];

#Agperiod3
def avg5 = ExpAverage(close(period = agperiod3), length);
def height5 = avg5 - avg5[length];

def avg6 = ExpAverage(close(period = agperiod3), length2);
def height6 = avg6 - avg6[length2];

def UP3 = avg5 > avg6;
def DOWN3 = avg5 < avg6;

def R5UP = avg5 > avg5[1];
def R5DN = avg5 < avg5[1];
def R6UP = avg6 > avg6[1];
def R6DN = avg6 < avg6[1];

#Agperiod4
def avg7 = ExpAverage(close(period = agperiod4), length);
def height7 = avg7 - avg7[length];

def avg8 = ExpAverage(close(period = agperiod4), length2);
def height8 = avg8 - avg8[length2];

def UP4 = avg7 > avg8;
def DOWN4 = avg7 < avg8;

def R7UP = avg7 > avg7[1];
def R7DN = avg7 < avg7[1];
def R8UP = avg8 > avg8[1];
def R8DN = avg8 < avg8[1];

#Agperiod5
def avg9 = ExpAverage(close(period = agperiod5), length);
def height9 = avg9 - avg9[length];

def avg10 = ExpAverage(close(period = agperiod5), length2);
def height10 = avg10 - avg10[length2];

def UP5 = avg9 > avg10;
def DOWN5 = avg9 < avg10;

def R9UP = avg9 > avg9[1];
def R9DN = avg9 < avg9[1];
def R10UP = avg10 > avg10[1];
def R10DN = avg10 < avg10[1];

#Agperiod6
def avg11 = ExpAverage(close(period = agperiod6), length);
def height11 = avg11 - avg11[length];

def avg12 = ExpAverage(close(period = agperiod6), length2);
def height12 = avg12 - avg12[length2];

def UP6 = avg11 > avg12;
def DOWN6 = avg11 < avg12;

def R11UP = avg11 > avg11[1];
def R11DN = avg11 < avg11[1];
def R12UP = avg12 > avg12[1];
def R12DN = avg12 < avg12[1];

def Long_Only = UP + UP2 + UP3 + UP4 + UP5 + UP6;
def Short_Only = DOWN + DOWN2 + DOWN3 + DOWN4 + DOWN5 + DOWN6;
def Consensus_Bias = Long_Only - Short_Only;

def RUP = UPC1 + UPC2 + R1UP + R2UP + R3UP + R4UP + R5UP + R6UP + R7UP + R8UP + R9UP + R10UP + R11UP + R12UP;
def RDN = DNC1 + DNC2 + R1DN + R2DN + R3DN + R4DN + R5DN + R6DN + R7DN + R8DN + R9DN + R10DN + R11DN + R12DN;
def ConsensusR = RUP - RDN;

script WMA_Smooth {
input price = hl2;
plot smooth = (4 * price

• 3 * price[1]
• 2 * price[2]
• price[3]) / 10;

}

script Phase_Accumulation {
# This is Ehler's Phase Accumulation code. It has a full cycle delay.
# However, it computes the correction factor to a very high degree.
#
input price = hl2;

rec Smooth;
rec Detrender;
rec Period;
rec Q1;
rec I1;
rec I1p;
rec Q1p;
rec Phase1;
rec Phase;
rec DeltaPhase;
rec DeltaPhase1;
rec InstPeriod1;
rec InstPeriod;
def CorrectionFactor;

if BarNumber() <= 5
then {
Period = 0;
Smooth = 0;
Detrender = 0;
CorrectionFactor = 0;
Q1 = 0;
I1 = 0;
Q1p = 0;
I1p = 0;
Phase = 0;
Phase1 = 0;
DeltaPhase1 = 0;
DeltaPhase = 0;
InstPeriod = 0;
InstPeriod1 = 0;
} else {
CorrectionFactor = 0.075 * Period[1] + 0.54;

# Smooth and detrend my smoothed signal:
Smooth = WMA_Smooth(price);
Detrender = ( 0.0962 * Smooth
+ 0.5769 * Smooth[2]

• 0.5769 * Smooth[4]
• 0.0962 * Smooth[6] ) * CorrectionFactor;

# Compute Quadrature and Phase of Detrended signal:
Q1p = ( 0.0962 * Detrender
+ 0.5769 * Detrender[2]

• 0.5769 * Detrender[4]
• 0.0962 * Detrender[6] ) * CorrectionFactor;

I1p = Detrender[3];

# Smooth out Quadrature and Phase:
I1 = 0.15 * I1p + 0.85 * I1p[1];
Q1 = 0.15 * Q1p + 0.85 * Q1p[1];

# Determine Phase
if I1 != 0
then {
# Normally, ATAN gives results from -pi/2 to pi/2.
# We need to map this to circular coordinates 0 to 2pi

if Q1 >= 0 and I1 > 0
then { # Quarant 1
Phase1 = ATan(AbsValue(Q1 / I1));
} else if Q1 >= 0 and I1 < 0
then { # Quadrant 2
Phase1 = Double.Pi - ATan(AbsValue(Q1 / I1));
} else if Q1 < 0 and I1 < 0
then { # Quadrant 3
Phase1 = Double.Pi + ATan(AbsValue(Q1 / I1));
} else { # Quadrant 4
Phase1 = 2 * Double.Pi - ATan(AbsValue(Q1 / I1));
}
} else if Q1 > 0
then { # I1 == 0, Q1 is positive
Phase1 = Double.Pi / 2;
} else if Q1 < 0
then { # I1 == 0, Q1 is negative
Phase1 = 3 * Double.Pi / 2;
} else { # I1 and Q1 == 0
Phase1 = 0;
}

# Convert phase to degrees
Phase = Phase1 * 180 / Double.Pi;

if Phase[1] < 90 and Phase > 270
then {
# This occurs when there is a big jump from 360-0
DeltaPhase1 = 360 + Phase[1] - Phase;
} else {
DeltaPhase1 = Phase[1] - Phase;
}

# Limit our delta phases between 7 and 60
if DeltaPhase1 < 7
then {
DeltaPhase = 7;
} else if DeltaPhase1 > 60
then {
DeltaPhase = 60;
} else {
DeltaPhase = DeltaPhase1;
}

# Determine Instantaneous period:
InstPeriod1 =
-1 * (fold i = 0 to 40 with v=0 do
if v < 0 then
v
else if v > 360 then
-i
else
v + GetValue(DeltaPhase, i, 41)
);

if InstPeriod1 <= 0
then {
InstPeriod = InstPeriod[1];
} else {
InstPeriod = InstPeriod1;
}

Period = 0.25 * InstPeriod + 0.75 * Period[1];
}
plot DC = Period;
}

script Ehler_MAMA {
input price = hl2;
input FastLimit = 0.5;
input SlowLimit = 0.05;


rec Period;
rec Period_raw;
rec Period_cap;
rec Period_lim;

rec Smooth;
rec Detrender;
rec I1;
rec Q1;
rec jI;
rec jQ;
rec I2;
rec Q2;
rec I2_raw;
rec Q2_raw;

rec Phase;
rec DeltaPhase;
rec DeltaPhase_raw;
rec alpha;
rec alpha_raw;

rec Re;
rec Im;
rec Re_raw;
rec Im_raw;

rec SmoothPeriod;
rec vmama;
rec vfama;

def CorrectionFactor = Phase_Accumulation(price).CorrectionFactor;

if BarNumber() <= 5
then {
Smooth = 0;
Detrender = 0;

Period = 0;
Period_raw = 0;
Period_cap = 0;
Period_lim = 0;
I1 = 0;
Q1 = 0;
I2 = 0;
Q2 = 0;
jI = 0;
jQ = 0;
I2_raw = 0;
Q2_raw = 0;
Re = 0;
Im = 0;
Re_raw = 0;
Im_raw = 0;
SmoothPeriod = 0;
Phase = 0;
DeltaPhase = 0;
DeltaPhase_raw = 0;
alpha = 0;
alpha_raw = 0;
vmama = 0;
vfama = 0;
} else {
# Smooth and detrend my smoothed signal:
Smooth = WMA_Smooth(price);
Detrender = ( 0.0962 * Smooth
+ 0.5769 * Smooth[2]

• 0.5769 * Smooth[4]
• 0.0962 * Smooth[6] ) * CorrectionFactor;

Q1 = ( 0.0962 * Detrender
+ 0.5769 * Detrender[2]

• 0.5769 * Detrender[4]
• 0.0962 * Detrender[6] ) * CorrectionFactor;

I1 = Detrender[3];

jI = ( 0.0962 * I1
+ 0.5769 * I1[2]

• 0.5769 * I1[4]
• 0.0962 * I1[6] ) * CorrectionFactor;

jQ = ( 0.0962 * Q1
+ 0.5769 * Q1[2]

• 0.5769 * Q1[4]
• 0.0962 * Q1[6] ) * CorrectionFactor;

# This is the complex conjugate
I2_raw = I1 - jQ;
Q2_raw = Q1 + jI;

I2 = 0.2 * I2_raw + 0.8 * I2_raw[1];
Q2 = 0.2 * Q2_raw + 0.8 * Q2_raw[1];

Re_raw = I2 * I2[1] + Q2 * Q2[1];
Im_raw = I2 * Q2[1] - Q2 * I2[1];

Re = 0.2 * Re_raw + 0.8 * Re_raw[1];
Im = 0.2 * Im_raw + 0.8 * Im_raw[1];

# Compute the phase
if Re != 0 and Im != 0
then {
Period_raw = 2 * Double.Pi / ATan(Im / Re);
} else {
Period_raw = 0;
}

if Period_raw > 1.5 * Period_raw[1]
then {
Period_cap = 1.5 * Period_raw[1];
} else if Period_raw < 0.67 * Period_raw[1] {
Period_cap = 0.67 * Period_raw[1];
} else {
Period_cap = Period_raw;
}

if Period_cap < 6
then {
Period_lim = 6;
} else if Period_cap > 50
then {
Period_lim = 50;
} else {
Period_lim = Period_cap;
}

Period = 0.2 * Period_lim + 0.8 * Period_lim[1];
SmoothPeriod = 0.33 * Period + 0.67 * SmoothPeriod[1];

if I1 != 0
then {
Phase = ATan(Q1 / I1);
} else if Q1 > 0
then { # Quadrant 1:
Phase = Double.Pi / 2;
} else if Q1 < 0
then { # Quadrant 4:
Phase = -Double.Pi / 2;
} else { # Both numerator and denominator are 0.
Phase = 0;
}

DeltaPhase_raw = Phase[1] - Phase;
if DeltaPhase_raw < 1
then {
DeltaPhase = 1;
} else {
DeltaPhase = DeltaPhase_raw;
}

alpha_raw = FastLimit / DeltaPhase;
if alpha_raw < SlowLimit
then {
alpha = SlowLimit;
} else {
alpha = alpha_raw;
}
vmama = alpha * price + (1 - alpha) * vmama[1];
vfama = 0.5 * alpha * vmama + (1 - 0.5 * alpha) * vfama[1];
}

plot MAMA = vmama;
plot FAMA = vfama;
}


input price2 = hl2;
input FastLimit = 0.5;
input SlowLimit = 0.05;

def MAMA = Ehler_MAMA(price2, FastLimit, SlowLimit).MAMA;
def FAMA = Ehler_MAMA(price2, FastLimit, SlowLimit).FAMA;

def Crossing = Crosses((MAMA < FAMA), yes);
#Crossing.SetPaintingStrategy(PaintingStrategy.BOOLEAN_ARROW_UP);

def Crossing1 = Crosses((MAMA > FAMA), yes);
#Crossing1.SetPaintingStrategy(PaintingStrategy.BOOLEAN_ARROW_DOWN);

AddLabel(yes, Concat("MAMA: ", Concat("",
if MAMA > FAMA then "Bull" else "Bear")),

if MAMA > FAMA then Color.GREEN else Color.RED);

##################################
plot C3_MF_Line = (MAMA + FAMA) / 2;
C3_MF_Line.SetPaintingStrategy(PaintingStrategy.LINE);
C3_MF_Line.SetLineWeight(3);

def direction = if ConsensusR > Consensus_Bias then 1 else if ConsensusR < Consensus_Bias then -1 else 0;
C3_MF_Line.AssignValueColor(if paintCandles and ((direction == 1) and (price > C3_MF_Line)) then Color.GREEN else if paintCandles and ((direction == -1) and (price < C3_MF_Line)) then Color.RED else Color.GRAY);


plot buy = AvgExp crosses above AvgExp2;#direction crosses above 0;
buy.SetPaintingStrategy(PaintingStrategy.BOOLEAN_ARROW_UP);
buy.SetDefaultColor(Color.WHITE);

plot sell = AvgExp crosses below AvgExp2;#direction crosses below 0;
sell.SetPaintingStrategy(PaintingStrategy.BOOLEAN_ARROW_DOWN );
sell.SetDefaultColor(Color.WHITE);

AssignPriceColor(if paintCandles then if direction == 1 then Color.GREEN else if direction == -1 then Color.RED else Color.GRAY else Color.CURRENT);

AddLabel(yes, if (Spark == 3) then "SPARK UP = " + Round(Spark, 1) else if (Spark == 0) then "SPARK DOWN = " + Round(Spark, 1) else "SPARK = " + Round(Spark, 1), if (Spark == 3) then Color.YELLOW else if ((Spark == 2) and (AvgExp > AvgExp2)) then Color.GREEN else if (Spark == 0) then Color.RED else Color.GRAY);

AddLabel(yes, if ((UP6 == 1) and (Consensus_Bias > 0)) then " SCALP_LONG " else if ((DOWN6) and (Consensus_Bias < 0)) then " SCALP_SHORT " else " CHOP ", if ((Consensus_Bias > 0) and (UP6 == 1)) then Color.GREEN else if ((Consensus_Bias < 0) and (DOWN6 == 1)) then Color.RED else Color.GRAY);

AddLabel(yes, if (ConsensusR > 0) then " LONG BIAS = %" + Round((ConsensusR / 14) * 100, 1) + " " else if (ConsensusR < 0) then " SHORT BIAS = %" + Round(((ConsensusR * -1) / 14) * 100, 1) + " " else " CHOP =" + Round((ConsensusR / 14) * 100, 1) + " ", if (ConsensusR > 0) then Color.GREEN else if (ConsensusR < 0) then Color.RED else Color.GRAY);

Alert(direction crosses above 0, "long", Alert.BAR, Sound.DING);
Alert(direction crosses below 0, "short", Alert.BAR, Sound.DING);

#Strategy
def Long_Entry = (ConsensusR crosses above Consensus_Bias);
def Long_Exit = (ConsensusR crosses below Consensus_Bias);
AddOrder(OrderType.BUY_AUTO, condition = Long_Entry, price = open[-1], 1, tickcolor = GetColor(1), arrowcolor = Color.LIME, name = "LE");
AddOrder(OrderType.SELL_AUTO, condition = Long_Exit, price = open[-1], 1, tickcolor = GetColor(2), arrowcolor = Color.LIME, name = "SE");

Alert(Long_Entry, "long Entry", Alert.BAR, Sound.RING);
Alert(Long_Exit, "Short Entry", Alert.BAR, Sound.RING);

Hi @Falout!
I am really happy to hear you are making good use of the Scalper! Per your request I have included the fib coefficient targets and posted the new code for Scalper v3 underneath the original scalper on pg.1 of the thread. I hope you find it helpful. Thanks for all of your feedback!

 

[Trader Raider]

... posted the new code for Scalper v3 ...

Be still, my heart Thank you for the update! Just exited a cattle short with Scalper v2. The bias label kept me in the trade when I was tempted to bail before hitting the target. Wasn't the most profitable trade of my life. But it was a nice enough scalp that I'll be celebrating with steak for lunch

Thank you again for everything you share with us! Just when I thought I was finished for the day, you give us something else and now I have to adjust my charts ... again

 

[lolreconlol]

Be still, my heart Thank you for the update! Just exited a cattle short with Scalper v2. The bias label kept me in the trade when I was tempted to bail before hitting the target. Wasn't the most profitable trade of my life. But it was a nice enough scalp that I'll be celebrating with steak for lunch

Thank you again for everything you share with us! Just when I thought I was finished for the day, you give us something else and now I have to adjust my charts ... again

Could you share a screenshot of your chart or share the workspace? Curious to see how you have things set up. Thank you!

 

[Trader Raider]

Could you share a screenshot of your chart or share the workspace? Curious to see how you have things set up. Thank you!

The signal was on Friday but I am not an afternoon trader. I saw the gap down at this morning's open and jumped in even though the spark score wasn't what I would have liked. I am NOT recommending others do that. I did it because I have experience trading this instrument.

Anyhow, I was watching these 2 grids in the sidebar. The top is Scalper v2 ... I love a clean chart! Below it are MTF RSM labels and a Chande Momentum Oscillator label.

https://imgur.com/a/YmKvCAs

 

[Falout]

Hi @Falout!
I am really happy to hear you are making good use of the Scalper! Per your request I have included the fib coefficient targets and posted the new code for Scalper v3 underneath the original scalper on pg.1 of the thread. I hope you find it helpful. Thanks for all of your feedback!

This is great. I really like how it can if you want to only open a trade during normal market hours and closes the trade on the last bar of the day. Today I was using scalper3 on top of scalper2 and scalper3 seemed to signal 1 three minute bar before scalper 2. The alerts seem to work a lot better also.

https://imgur.com/MuBnBkN

 

[alexsmith3546]

I might be doing something really dumb here but

Hi @Falout!
I am really happy to hear you are making good use of the Scalper! Per your request I have included the fib coefficient targets and posted the new code for Scalper v3 underneath the original scalper on pg.1 of the thread. I hope you find it helpful. Thanks for all of your feedback!

I might be doing something really dumb here but I dont see any fib levels or labels when I import this in, am i supposed to use it as a study or a strategy ?

 

[Babaji Ka Thullu]

I might be doing something really dumb here but

I might be doing something really dumb here but I dont see any fib levels or labels when I import this in, am i supposed to use it as a study or a strategy ?

Try going to a 1 minute chart... as @Christopher84 has mentioned, settings need to change if you are on a different aggregation.... and V3 is a strategy

 

[Flexcw]

Can this be used for premarket, and is it setup to buy and sell automatically, what do the yellow candles mean?

 

[Trader Raider]

Did the devs at TOS update something over the weekend? I cannot get Scalper v2 or v3 to color candles if I select aggregations higher than 4 hours in the settings. Is it just me?

 

[Flexcw]

Did the devs at TOS update something over the weekend? I cannot get Scalper v2 or v3 to color candles if I select aggregations higher than 4 hours in the settings. Is it just me?

It will not color candles on mine until 0930 with V3

 

[Trader Raider]

It will not color candles on mine until 0930 with V3

Good observation. It will color some candles after 0800 for some instruments but not others. Very strange.

 

[Falout]

Good observation. It will color some candles after 0800 for some instruments but not others. Very strange.

You can adjust the settings in V3.

https://imgur.com/SBBwq1k

 

[Trader Raider]

You can adjust the settings in V3.

Indeed. Was just curious if anyone else is experiencing issues as I am encountering the problem with v2 (which lacks the daytime only setting) and v3 when higher aggregations are selected. Wasn't sure if the problem is my installation of TOS or the devs changed something. Not complaining though ... colors aren't a deal breaker.

Best Wishes and Happy Trading!

 

[Christopher84]

Indeed. Was just curious if anyone else is experiencing issues as I am encountering the problem with v2 (which lacks the daytime only setting) and v3 when higher aggregations are selected. Wasn't sure if the problem is my installation of TOS or the devs changed something. Not complaining though ... colors aren't a deal breaker.

Best Wishes and Happy Trading!

Hi @Trader Raider!
I'm sorry to hear that you are having issues with the Scalper. I have been trying to duplicate the issue that you are describing in hopes of fixing it, but so far I haven't been able to. If you can share some more specifics on your setup, I might have some more luck duplicating the issue and hopefully figuring out how to resolve it. As always, thank you for your feedback! Happy trading @Trader Raider!

 

[Falout]

Indeed. Was just curious if anyone else is experiencing issues as I am encountering the problem with v2 (which lacks the daytime only setting) and v3 when higher aggregations are selected. Wasn't sure if the problem is my installation of TOS or the devs changed something. Not complaining though ... colors aren't a deal breaker.

Best Wishes and Happy Trading!

I am still using V3 on top of V2 and I noticed I have to let v3 do the candle painting and turn candle painting off on V2.

https://imgur.com/WwFUtGC

 

[Trader Raider]

I am still using V3 on top of V2 and I noticed I have to let v3 do the candle painting and turn candle painting off on V2.

That's interesting. What's the highest aggregation you're using for v2? For me, if I go 4 hours or higher, that's where the colors seem to have issues painting.

 

[Falout]

That's interesting. What's the highest aggregation you're using for v2? For me, if I go 4 hours or higher, that's where the colors seem to have issues painting.

I have these settings on both using a 4 minute chart.

https://imgur.com/h39Fs0p

 

[Trader Raider]

I'm sorry to hear that you are having issues with the Scalper. I have been trying to duplicate the issue that you are describing in hopes of fixing it, but so far I haven't been able to. If you can share some more specifics on your setup, I might have some more luck duplicating the issue and hopefully figuring out how to resolve it. As always, thank you for your feedback! Happy trading

Christopher, you are very kind! Please understand I was/am trying to figure out if there is an issue with my installation of TOS or whether perhaps the devs changed something last weekend. I am NOT complaining or finding fault with my beloved scalper

1st observation: the problem seems to occur more often outside of the US session or during the morning of the US session.
2nd: It seems random in the sense that some instruments are affected and others are not (looking only at futures)
3rd: It seems to affect charts with aggregations (in the scalper v2 settings) of 4 hours or higher.

Example: A 2 min RTY chart with agg times set at 2 min, 3 min, 5 min, 10 min, 15 min, 30 min will plot fine. But change the 30 min agg time to 4 hours or higher and then the colors may plot fine for certain time periods but not for others.

I thought at first it might be related to Monday being a holiday, but I have seen it happen since then, so I really am perplexed as to whether the devs changed something in the software or my TOS is having issues. It just occurred to me to collect my TOS garbage, so I just did that and will see if that solves anything ... apologies in advance if it turns out I wasted your time for something stupid like that

Here is the way to collect garbage if anyone is wondering.

 

[eagle_ai]

Hi @Christopher84
cc: @Falout

Is there anyway to get this set up (C3 Max + Scalper) to work with 3, 5 and 15min charts? I tried the other time frames, but the scalper strategy doesn't work.

Thank you

 

[Falout]

Hi @Christopher84
cc: @Falout

Is there anyway to get this set up (C3 Max + Scalper) to work with 3, 5 and 15min charts? I tried the other time frames, but the scalper strategy doesn't work.

Thank you

https://tos.mx/iHw5hKi
This is what I use. I generally wont make a trade until after 10:00 A.M. New York time to get the best winning percentages. You should be able to just add C3 Max.

https://imgur.com/YpZk0x1