Volume Profile Indicator & POCs For ThinkOrSwim

Join useThinkScript to post your question to a community of 21,000+ developers and traders.

Does anyone know how to scan for stocks in relation to the current project Volume profile. For ex, stocks within 5% of VAH-yearly or stocks consolidating between VAL and POC.
 
1696009719730.png

https://usethinkscript.com/threads/...pocs-for-thinkorswim.8153/page-15#post-127414

I have created a scan for finding specific Volume Profile distribution shapes based on the location of the Point of Control. >.65 for P shape profiles and <.35 for b shaped profiles

I am trying to make a scan where the POC is in the middle of the distribution (middle of value area), this would identify B and D shaped profiles but i cannot fix this error, would really appreciate some help.

here is the code with the error

plot Data = close;

#VolumeProfile_PreviousDay_displayed_NextDau
#20190426 Sleepyz

def height = PricePerRow.Ticksize;
input timePerProfile = {CHART, MINUTE, HOUR, default DAY, WEEK, MONTH, "OPT EXP", BAR};
input multiplier = 1;
input profiles = 1000;
input valueAreaPercent = 70;

def period;
def yyyymmdd = GetYYYYMMDD();
def seconds = SecondsFromTime(0);
def month = GetYear() * 12 + GetMonth();
def day_number = DaysFromDate(First(yyyymmdd)) + GetDayOfWeek(First(yyyymmdd));
def dom = GetDayOfMonth(yyyymmdd);
def dow = GetDayOfWeek(yyyymmdd - dom + 1);
def expthismonth = (if dow > 5 then 27 else 20) - dow;
def exp_opt = month + (dom > expthismonth);
switch (timePerProfile) {
case CHART:
period = 0;
case MINUTE:
period = Floor(seconds / 60 + day_number * 24 * 60);
case HOUR:
period = Floor(seconds / 3600 + day_number * 24);
case DAY:
period = CountTradingDays(Min(First(yyyymmdd), yyyymmdd), yyyymmdd) - 1;
case WEEK:
period = Floor(day_number / 7);
case MONTH:
period = Floor(month - First(month));
case "OPT EXP":
period = exp_opt - First(exp_opt);
case BAR:
period = BarNumber() - 1;
}

def count = CompoundValue(1, if period != period[1] then (count[1] + period - period[1]) % multiplier else count[1], 0);
def cond = count < count[1] + period - period[1];
profile vol = VolumeProfile("startNewProfile" = cond, "numberOfProfiles" = profiles, "pricePerRow" = height, "value area percent" = valueAreaPercent, onExpansion = no);

#Prior Day High/Low ValueAreas
def HVA = if IsNaN(vol.GetHighestValueArea()) then HVA[1] else vol.GetHighestValueArea();
def pHVA = CompoundValue(1, if cond then HVA[1] else pHVA[1], Double.NaN);
def LVA = if IsNaN(vol.GetLowestValueArea()) then LVA[1] else vol.GetLowestValueArea();
def pLVA = CompoundValue(1, if cond then LVA[1] else pLVA[1], Double.NaN);

plot PrevHVA = if isnan(close) then double.nan else pHVA;
plot PrevLVA = if isnan(close) then double.nan else pLVA;
PrevHVA.SetDefaultColor(Color.YELLOW);
PrevLVA.SetDefaultColor(Color.YELLOW);
PrevHVA.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
PrevLVA.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);

#Prior Day POC Calculated
def POC = if IsNaN(vol.GetPointOfControl()) and cond then POC[1] else vol.GetPointOfControl();
def pPOC = CompoundValue (1, if cond then POC[1] else pPOC[1], Double.NaN);

plot PrevPOC = pPOC;
PrevPOC.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
PrevPOC.SetDefaultColor(Color.MAGENTA);

plot scan= (PrevPOC - PrevLVA) / (PrevHVA -PrevLVA) = .50;
 
Last edited by a moderator:
View attachment 19829
https://usethinkscript.com/threads/...pocs-for-thinkorswim.8153/page-15#post-127414

I have created a scan for finding specific Volume Profile distribution shapes based on the location of the Point of Control. >.65 for P shape profiles and <.35 for b shaped profiles

I am trying to make a scan where the POC is in the middle of the distribution (middle of value area), this would identify B and D shaped profiles but i cannot fix this error, would really appreciate some help.

here is the code with the error

plot Data = close;

#VolumeProfile_PreviousDay_displayed_NextDau
#20190426 Sleepyz

def height = PricePerRow.Ticksize;
input timePerProfile = {CHART, MINUTE, HOUR, default DAY, WEEK, MONTH, "OPT EXP", BAR};
input multiplier = 1;
input profiles = 1000;
input valueAreaPercent = 70;

def period;
def yyyymmdd = GetYYYYMMDD();
def seconds = SecondsFromTime(0);
def month = GetYear() * 12 + GetMonth();
def day_number = DaysFromDate(First(yyyymmdd)) + GetDayOfWeek(First(yyyymmdd));
def dom = GetDayOfMonth(yyyymmdd);
def dow = GetDayOfWeek(yyyymmdd - dom + 1);
def expthismonth = (if dow > 5 then 27 else 20) - dow;
def exp_opt = month + (dom > expthismonth);
switch (timePerProfile) {
case CHART:
period = 0;
case MINUTE:
period = Floor(seconds / 60 + day_number * 24 * 60);
case HOUR:
period = Floor(seconds / 3600 + day_number * 24);
case DAY:
period = CountTradingDays(Min(First(yyyymmdd), yyyymmdd), yyyymmdd) - 1;
case WEEK:
period = Floor(day_number / 7);
case MONTH:
period = Floor(month - First(month));
case "OPT EXP":
period = exp_opt - First(exp_opt);
case BAR:
period = BarNumber() - 1;
}

def count = CompoundValue(1, if period != period[1] then (count[1] + period - period[1]) % multiplier else count[1], 0);
def cond = count < count[1] + period - period[1];
profile vol = VolumeProfile("startNewProfile" = cond, "numberOfProfiles" = profiles, "pricePerRow" = height, "value area percent" = valueAreaPercent, onExpansion = no);

#Prior Day High/Low ValueAreas
def HVA = if IsNaN(vol.GetHighestValueArea()) then HVA[1] else vol.GetHighestValueArea();
def pHVA = CompoundValue(1, if cond then HVA[1] else pHVA[1], Double.NaN);
def LVA = if IsNaN(vol.GetLowestValueArea()) then LVA[1] else vol.GetLowestValueArea();
def pLVA = CompoundValue(1, if cond then LVA[1] else pLVA[1], Double.NaN);

plot PrevHVA = if isnan(close) then double.nan else pHVA;
plot PrevLVA = if isnan(close) then double.nan else pLVA;
PrevHVA.SetDefaultColor(Color.YELLOW);
PrevLVA.SetDefaultColor(Color.YELLOW);
PrevHVA.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
PrevLVA.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);

#Prior Day POC Calculated
def POC = if IsNaN(vol.GetPointOfControl()) and cond then POC[1] else vol.GetPointOfControl();
def pPOC = CompoundValue (1, if cond then POC[1] else pPOC[1], Double.NaN);

plot PrevPOC = pPOC;
PrevPOC.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
PrevPOC.SetDefaultColor(Color.MAGENTA);

plot scan= (PrevPOC - PrevLVA) / (PrevHVA -PrevLVA) = .50;

Change this line:
plot scan= (PrevPOC - PrevLVA) / (PrevHVA -PrevLVA) = .50;
to
plot scan= (PrevPOC - PrevLVA) / (PrevHVA -PrevLVA) == .50;
 
Change this line:
plot scan= (PrevPOC - PrevLVA) / (PrevHVA -PrevLVA) = .50;
to
plot scan= (PrevPOC - PrevLVA) / (PrevHVA -PrevLVA) == .50;
Looking for some Volume Profile scans and looked at this one but after changing the plot scan line you get:

What would be the fix to get the scan to work?
1700011273852.png
 
# Volume Profile for User Set Time # Mobius # Chat Room Discussion 03.26.2018 input pricePerRowHeightMode = {AUTOMATIC, TICKSIZE, default CUSTOM}; input customRowHeight = 1.0; input onExpansion = no; input profiles = 5; #Hint profiles: for just RTH 1 for GlobeX and RTH 2 input showPointOfControl = yes; input showValueArea = yes; input valueAreaPercent = 68; input opacity = 5; input Begin = 0930; def TS = TickSize(); def Active = SecondsTillTime(Begin) == 0; def cond = Active; def height; switch (pricePerRowHeightMode) { case AUTOMATIC: height = PricePerRow.AUTOMATIC; case TICKSIZE: height = PricePerRow.TICKSIZE; case CUSTOM: height = customRowHeight; } profile vol = VolumeProfile("startNewProfile" = cond, "onExpansion" = onExpansion, "numberOfProfiles" = profiles, "pricePerRow" = height, "value area percent" = valueAreaPercent); def con = CompoundValue(1, onExpansion, no); def pc = if IsNaN(vol.GetPointOfControl()) and con then pc[1] else vol.GetPointOfControl(); def hVA = if IsNaN(vol.GetHighestValueArea()) and con then hVA[1] else Round(vol.GetHighestValueArea(), 0); def lVA = if IsNaN(vol.GetLowestValueArea()) and con then lVA[1] else vol.GetLowestValueArea(); def hProfile = if IsNaN(vol.GetHighest()) and con then hProfile[1] else vol.GetHighest(); def lProfile = if IsNaN(vol.GetLowest()) and con then lProfile[1] else vol.GetLowest(); def plotsDomain = IsNaN(close) == onExpansion; plot POC = if plotsDomain then Round(pc / TS, 0) * TS else Double.NaN; plot ProfileHigh = if plotsDomain then Round(hProfile / TS, 0) * TS else Double.NaN; plot ProfileLow = if plotsDomain then Round(lProfile / TS, 0) * TS else Double.NaN; plot VAHigh = if plotsDomain then Round(hVA / TS, 0) * TS else Double.NaN; plot VALow = if plotsDomain then Round(lVA / TS, 0) * TS else Double.NaN; DefineGlobalColor("Profile", GetColor(1)); DefineGlobalColor("Point Of Control", GetColor(5)); DefineGlobalColor("Value Area", GetColor(8)); vol.Show(GlobalColor("Profile"), if showPointOfControl then GlobalColor("Point Of Control") else Color.CURRENT, if showValueArea then GlobalColor("Value Area") else Color.CURRENT, opacity); POC.SetDefaultColor(GlobalColor("Point Of Control")); POC.SetPaintingStrategy(PaintingStrategy.HORIZONTAL); VAHigh.SetPaintingStrategy(PaintingStrategy.HORIZONTAL); VAHigh.HideBubble(); VAHigh.HideTitle(); VALow.SetPaintingStrategy(PaintingStrategy.HORIZONTAL); VALow.HideBubble(); VALow.HideTitle(); VAHigh.SetDefaultColor(GlobalColor("Value Area")); VALow.SetDefaultColor(GlobalColor("Value Area")); ProfileHigh.SetPaintingStrategy(PaintingStrategy.HORIZONTAL); ProfileLow.SetPaintingStrategy(PaintingStrategy.HORIZONTAL); ProfileHigh.SetDefaultColor(GetColor(3)); ProfileLow.SetDefaultColor(GetColor(3)); ProfileHigh.Hide(); ProfileLow.Hide(); def bubble = isNaN(close[2]) and !isNaN(close[3]); AddChartBubble(bubble, VAHigh[3], "VAH", color = Color.YELLOW, yes); AddChartBubble(bubble, VALow[3], "VAL", Color.YELLOW, no); AddChartBubble(bubble, POC[3], "POC", Color.RED, no); # End Code Volume Profile User Set Time
This has a begin timeframe, is it possible to add an end time to this?
 
Looking for some Volume Profile scans and looked at this one but after changing the plot scan line you get:

What would be the fix to get the scan to work?
View attachment 20167

Here is an example to get the scan to work.

After making the correction to plot scan, save the study. I named it newstudy3360. In the scan study editor, enter newstudy3360().scan. The scan will produce results. I did not test the results.

 
Does anyone know how to plot market profile indicator for Forex trading on TOS?
No, it is not possible. POCs are driven by volume. Forex has no volume.
No volume, no POC.
 
Last edited:
Hi @SleepyZ,
I have been using this VPOC script that you created in Jan 2023. I tried to find where you posted this script but was unable to. It makes a line at the previous two days vpocs. I am interested in converting the script to give one line for the 30 day vpoc and another for the 90 day vpoc. I made a few small changes to the script by adding a V1daysback. The 30 day vpoc line seems to work, but the 90 day vpoc line is simply a 90 day extension of the 30 day vpoc line. Could you please make the code adjustment so that I get a seperate 90 day line?

https://tos.mx/YxPXDCa
Ruby:
# VPOC created by Sleepyz in Jan 2023
input Vdaysback = 30;
input V1daysback = 90;
input showonexpansion = no;
input begin  = 0930;
input end    = 1600;
def ymd      = GetYYYYMMDD();
def candles  = !IsNaN(close);
def capture  = candles and ymd != ymd[1];
def dayCount = CompoundValue(1, if capture then dayCount[1] + 1 else dayCount[1], 0);
def thisDay  = (HighestAll(dayCount) - dayCount) ;
def na       = Double.NaN;
def rth      = SecondsFromTime(begin) >= 0 and SecondsTillTime(end) >= 0;
def cond = rth != rth[1];

profile vol   = VolumeProfile("startNewProfile" = cond and secondstilltime(end)>=0, "onExpansion" = no, "numberOfProfiles" = 1000, pricePerRow = PricePerRow.TICKSIZE);
def pca       = if IsNaN(vol.GetPointOfControl())   then pca[1] else vol.GetPointOfControl()[1];
def poc       = if !rth or IsNaN(close) then poc[1] else pca[1];
###########

def Vpoc      = if thisDay == Vdaysback and secondsFromTime(begin) >= 0 then poc else vpoc[1];
def V1poc     = if thisDay == V1daysback and secondsFromTime(begin) >= 0 then poc else v1poc[1];

plot Vpoc1  = if showonexpansion and !IsNaN(close) or thisDay > Vdaysback then Double.NaN else vpoc;
plot V1poc1   = if showonexpansion and !IsNaN(close) or thisDay > V1daysback then Double.NaN else V1poc;

vpoc1.SetDefaultColor(Color.Yellow);
v1poc1.SetDefaultColor(Color.Yellow);

vpoc1.setpaintingStrategy(paintingStrategy.HORIZONTAL);
v1poc1.setpaintingStrategy(paintingStrategy.HORIZONTAL);
 
Last edited by a moderator:
Hi @SleepyZ,
I have been using this VPOC script that you created in Jan 2023. I tried to find where you posted this script but was unable to. It makes a line at the previous two days vpocs. I am interested in converting the script to give one line for the 30 day vpoc and another for the 90 day vpoc. I made a few small changes to the script by adding a V1daysback. The 30 day vpoc line seems to work, but the 90 day vpoc line is simply a 90 day extension of the 30 day vpoc line. Could you please make the code adjustment so that I get a seperate 90 day line?

https://tos.mx/YxPXDCa
Ruby:
# VPOC created by Sleepyz in Jan 2023
input Vdaysback = 30;
input V1daysback = 90;
input showonexpansion = no;
input begin  = 0930;
input end    = 1600;
def ymd      = GetYYYYMMDD();
def candles  = !IsNaN(close);
def capture  = candles and ymd != ymd[1];
def dayCount = CompoundValue(1, if capture then dayCount[1] + 1 else dayCount[1], 0);
def thisDay  = (HighestAll(dayCount) - dayCount) ;
def na       = Double.NaN;
def rth      = SecondsFromTime(begin) >= 0 and SecondsTillTime(end) >= 0;
def cond = rth != rth[1];

profile vol   = VolumeProfile("startNewProfile" = cond and secondstilltime(end)>=0, "onExpansion" = no, "numberOfProfiles" = 1000, pricePerRow = PricePerRow.TICKSIZE);
def pca       = if IsNaN(vol.GetPointOfControl())   then pca[1] else vol.GetPointOfControl()[1];
def poc       = if !rth or IsNaN(close) then poc[1] else pca[1];
###########

def Vpoc      = if thisDay == Vdaysback and secondsFromTime(begin) >= 0 then poc else vpoc[1];
def V1poc     = if thisDay == V1daysback and secondsFromTime(begin) >= 0 then poc else v1poc[1];

plot Vpoc1  = if showonexpansion and !IsNaN(close) or thisDay > Vdaysback then Double.NaN else vpoc;
plot V1poc1   = if showonexpansion and !IsNaN(close) or thisDay > V1daysback then Double.NaN else V1poc;

vpoc1.SetDefaultColor(Color.Yellow);
v1poc1.SetDefaultColor(Color.Yellow);

vpoc1.setpaintingStrategy(paintingStrategy.HORIZONTAL);
v1poc1.setpaintingStrategy(paintingStrategy.HORIZONTAL);

The code works with enough days timeframe displayed to separately do both 30 and 90 lookbacks for Intraday charts.
However, for Daily Charts, an adjustment for the def cond from rth != rth[1], which Day bars do not have, to ymd != ymd[1] was necessary.

The following switch for input Chart_Mode should fix that problem.
Code:
####### Chart Mode
input Chart_Mode = {default Intraday, Day};
def cond;
switch (Chart_Mode) {
case Intraday:
    cond = rth != rth[1];
case Day:
    cond = thisDay != thisDay[1];
}

Here is the full code with an image with both an Intraday and Day Charts.

Screenshot 2024-01-03 133145.png
Code:
# VPOC created by Sleepyz in Jan 2023
input Vdaysback = 30;
input V1daysback = 90;
input showonexpansion = no;
input begin  = 0930;
input end    = 1600;
def ymd      = GetYYYYMMDD();
def candles  = !IsNaN(close);
def capture  = candles and ymd != ymd[1];
def dayCount = CompoundValue(1, if capture then dayCount[1] + 1 else dayCount[1], 0);
def thisDay  = (HighestAll(dayCount) - dayCount) ;
def na       = Double.NaN;
def rth      = SecondsFromTime(begin) >= 0 and SecondsTillTime(end) >= 0;

####### Chart Mode
input Chart_Mode = {default Intraday, Day};
def cond;
switch (Chart_Mode) {
case Intraday:
    cond = rth != rth[1];
case Day:
    cond = thisDay != thisDay[1];
}

profile vol   = VolumeProfile("startNewProfile" = cond and SecondsTillTime(end) >= 0, "onExpansion" = no, "numberOfProfiles" = 1000, pricePerRow = PricePerRow.TICKSIZE);
def pca       = if IsNaN(vol.GetPointOfControl())   then pca[1] else vol.GetPointOfControl()[1];
def poc       = if !rth or IsNaN(close) then poc[1] else pca[1];
###########

def Vpoc      = if thisDay == Vdaysback and SecondsFromTime(begin) >= 0 then poc else Vpoc[1];
def V1poc     = if thisDay == V1daysback and SecondsFromTime(begin) >= 0 then poc else V1poc[1];

plot Vpoc1  = if showonexpansion and !IsNaN(close) or thisDay > Vdaysback then Double.NaN else Vpoc;
plot V1poc1 = if showonexpansion and !IsNaN(close) or thisDay > V1daysback then Double.NaN else V1poc;

Vpoc1.SetDefaultColor(Color.YELLOW);
V1poc1.SetDefaultColor(Color.YELLOW);

Vpoc1.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
V1poc1.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);

#
 

Attachments

  • Screenshot 2024-01-03 130026.png
    Screenshot 2024-01-03 130026.png
    124 KB · Views: 223
The code works with enough days timeframe displayed to separately do both 30 and 90 lookbacks for Intraday charts.
However, for Daily Charts, an adjustment for the def cond from rth != rth[1], which Day bars do not have, to ymd != ymd[1] was necessary.

The following switch for input Chart_Mode should fix that problem.


Here is the full code with an image with both an Intraday and Day Charts.
Hi Sleepyz,
I'm looking at SPY's Vpoc1 line today, 1/5/24, at 450.81. It is set to 30 vdaysback on Day chart mode. I thought this would give me the monthly vpoc but I just saw that someone who puts out good info state that the monthly vpoc is 472. Can you please let me know if this script gives the monthly vpoc and setting v1poc1to 90 gives the correct quarterly vpoc? The 90 day v1poc1 is currently at 441.62. Thanks
 
Hi Sleepyz,
I'm looking at SPY's Vpoc1 line today, 1/5/24, at 450.81. It is set to 30 vdaysback on Day chart mode. I thought this would give me the monthly vpoc but I just saw that someone who puts out good info state that the monthly vpoc is 472. Can you please let me know if this script gives the monthly vpoc and setting v1poc1to 90 gives the correct quarterly vpoc? The 90 day v1poc1 is currently at 441.62. Thanks


Monthly Volume Point of Control. Is based on a ONE month bar on the MONTHly chart
shared chart link: http://tos.mx/TBVjg3p Click here for --> Easiest way to load shared links
zo5Pmkx.png
 
Last edited:
I'm wondering if Sleepyz's vpoc script above can be edited to gather the vpocs of 29, 22, 15, 8, and 1day ago and average them to get an approximate monthly vpoc, as long as today isn't a Sunday or a Monday.

This will add 1 day if the day of the week is Sunday/Monday for the lookback days.

Screenshot 2024-01-06 095057.png
Code:
# VPOC created by Sleepyz in Jan 2023
input Vdaysback = 1;
input V1daysback = 8;
input V2daysback = 15;
input V3daysback = 22;
input V4daysback = 29;

input showonexpansion = no;
input begin  = 0930;
input end    = 1600;
def ymd      = GetYYYYMMDD();
def candles  = !IsNaN(close);
def capture  = candles and ymd != ymd[1];
def dayCount = CompoundValue(1, if capture then dayCount[1] + 1 else dayCount[1], 0);
def thisDay  = (HighestAll(dayCount) - dayCount) ;
def na       = Double.NaN;
def rth      = SecondsFromTime(begin) >= 0 and SecondsTillTime(end) >= 0;

####### Chart Mode
input Chart_Mode = {default Intraday, Day};
def cond;
switch (Chart_Mode) {
case Intraday:
    cond = rth != rth[1];
case Day:
    cond = thisDay != thisDay[1];
}

profile vol   = VolumeProfile("startNewProfile" = cond and SecondsTillTime(end) >= 0, "onExpansion" = no, "numberOfProfiles" = 1000, pricePerRow = PricePerRow.TICKSIZE);
def pca       = if IsNaN(vol.GetPointOfControl())   then pca[1] else vol.GetPointOfControl()[1];
def poc       = if !rth or IsNaN(close) then poc[1] else pca[1];
###########

#Day of Week
input Show_DayofWeek_Test = yes;
def vday  = if thisDay == Vdaysback then GetDayOfWeek(GetYYYYMMDD()) else vday[1];
def v1day = if thisDay == V1daysback then GetDayOfWeek(GetYYYYMMDD()) else v1day[1];
def v2day = if thisDay == V2daysback then GetDayOfWeek(GetYYYYMMDD()) else v2day[1];
def v3day = if thisDay == V3daysback then GetDayOfWeek(GetYYYYMMDD()) else v3day[1];
def v4day = if thisDay == V4daysback then GetDayOfWeek(GetYYYYMMDD()) else v4day[1];
AddLabel(Show_DayofWeek_Test, "Test_ Day of Week || V: " + vday + "; V1: " + v1day + "; V2: " + v2day + "; V3: " + v3day + "; V4: " + v4day, Color.YELLOW);

######## Vpocs
def Vpoc      = if thisDay == Vdaysback + if vday == 1 then 1 else 0 and SecondsFromTime(begin) >= 0 then poc else Vpoc[1];
def V1poc     = if thisDay == V1daysback + if vday == 1 then 1 else 0  and SecondsFromTime(begin) >= 0 then poc else V1poc[1];
def V2poc     = if thisDay == V2daysback + if vday == 1 then 1 else 0  and SecondsFromTime(begin) >= 0 then poc else V2poc[1];
def V3poc     = if thisDay == V3daysback + if vday == 1 then 1 else 0  and SecondsFromTime(begin) >= 0 then poc else V3poc[1];
def V4poc     = if thisDay == V4daysback + if vday == 1 then 1 else 0  and SecondsFromTime(begin) >= 0 then poc else V4poc[1];

plot Vpoc1   = if showonexpansion and !IsNaN(close) or thisDay > Vdaysback then Double.NaN else Vpoc;
plot V1poc1  = if showonexpansion and !IsNaN(close) or thisDay > V1daysback then Double.NaN else V1poc;
plot V2poc1  = if showonexpansion and !IsNaN(close) or thisDay > V2daysback then Double.NaN else V2poc;
plot V3poc1  = if showonexpansion and !IsNaN(close) or thisDay > V3daysback then Double.NaN else V3poc;
plot V4poc1  = if showonexpansion and !IsNaN(close) or thisDay > V4daysback then Double.NaN else V4poc;

Vpoc1.SetDefaultColor(Color.YELLOW);
V1poc1.SetDefaultColor(Color.YELLOW);
V2poc1.SetDefaultColor(Color.YELLOW);
V3poc1.SetDefaultColor(Color.YELLOW);
V4poc1.SetDefaultColor(Color.YELLOW);

Vpoc1.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
V1poc1.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
V2poc1.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
V3poc1.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
V4poc1.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);

######### Average of Vpocs

plot AvgVpoc1 = if GetDay() != GetLastDay() then Double.NaN
               else (Vpoc1 + V1poc1 + V2poc1 + V3poc1 + V4poc1) / 5;
AvgVpoc1.SetDefaultColor(Color.CYAN);
AvgVpoc1.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
AvgVpoc1.SetLineWeight(3);

AddLabel(1, "Avg Vpoc: " + AsText(AvgVpoc1), Color.CYAN);

######### Bubbles

input showbubbles = yes;
input bubblemover = 2;
def b  = bubblemover;
def b1 = b + 1;
def mover = showbubbles and !IsNaN(close[b1]) and IsNaN(close[b]);

AddChartBubble(mover, AvgVpoc1, "AV", AvgVpoc1.TakeValueColor());
AddChartBubble(mover, Vpoc1, "V" + (Vdaysback + if vday == 1 then 1 else 0), Vpoc1.TakeValueColor());
AddChartBubble(mover, V1poc1, "V" + (V1daysback + if v1day == 1 then 1 else 0), V1poc1.TakeValueColor());
AddChartBubble(mover, V2poc1, "V" + (V2daysback + if v2day == 1 then 1 else 0), V2poc1.TakeValueColor());
AddChartBubble(mover, V3poc1, "V" + (V3daysback + if v3day == 1 then 1 else 0), V3poc1.TakeValueColor());
AddChartBubble(mover, V4poc1, "V" + (V4daysback + if v4day == 1 then 1 else 0), V4poc1.TakeValueColor());

#
 
This will add 1 day if the day of the week is Sunday/Monday for the lookback days.
Thanks for updating the script. I just want to see a line for the average vpoc and tried to comment out the others and change plot to def so they wouldn't show, but now the average vpoc line appears as a dash today only on the daily chart and doesn't extend to the right. The bubble and label do show. Thanks for your help.

https://tos.mx/StM6MSX
 
Last edited:
Thanks for updating the script. I just want to see a line for the average vpoc and tried to comment out the others and change plot to def so they wouldn't show, but now the average vpoc line appears as a dash today only on the daily chart and doesn't extend to the right. The bubble and label do show. Thanks for your help.

https://tos.mx/StM6MSX
This works as you wanted

Screenshot 2024-01-06 203519.png
Code:
# VPOC created by Sleepyz in Jan 2023
input hide_non_avg_plots = yes;
input Vdaysback = 1;
input V1daysback = 8;
input V2daysback = 15;
input V3daysback = 22;
input V4daysback = 29;

input showonexpansion = no;
input begin  = 0930;
input end    = 1600;
def ymd      = GetYYYYMMDD();
def candles  = !IsNaN(close);
def capture  = candles and ymd != ymd[1];
def dayCount = CompoundValue(1, if capture then dayCount[1] + 1 else dayCount[1], 0);
def thisDay  = (HighestAll(dayCount) - dayCount) ;
def na       = Double.NaN;
def rth      = SecondsFromTime(begin) >= 0 and SecondsTillTime(end) >= 0;

####### Chart Mode
input Chart_Mode = {default Intraday, Day};
def cond;
switch (Chart_Mode) {
case Intraday:
    cond = rth != rth[1];
case Day:
    cond = thisDay != thisDay[1];
}

profile vol   = VolumeProfile("startNewProfile" = cond and SecondsTillTime(end) >= 0, "onExpansion" = no, "numberOfProfiles" = 1000, pricePerRow = PricePerRow.TICKSIZE);
def pca       = if IsNaN(vol.GetPointOfControl())   then pca[1] else vol.GetPointOfControl()[1];
def poc       = if !rth or IsNaN(close) then poc[1] else pca[1];
###########

#Day of Week
input Show_DayofWeek_Test = yes;
def vday  = if thisDay == Vdaysback then GetDayOfWeek(GetYYYYMMDD()) else vday[1];
def v1day = if thisDay == V1daysback then GetDayOfWeek(GetYYYYMMDD()) else v1day[1];
def v2day = if thisDay == V2daysback then GetDayOfWeek(GetYYYYMMDD()) else v2day[1];
def v3day = if thisDay == V3daysback then GetDayOfWeek(GetYYYYMMDD()) else v3day[1];
def v4day = if thisDay == V4daysback then GetDayOfWeek(GetYYYYMMDD()) else v4day[1];
AddLabel(Show_DayofWeek_Test, "Test_ Day of Week || V: " + vday + "; V1: " + v1day + "; V2: " + v2day + "; V3: " + v3day + "; V4: " + v4day, Color.YELLOW);

######## Vpocs
def Vpoc      = if thisDay == Vdaysback + if vday == 1 then 1 else 0 and SecondsFromTime(begin) >= 0 then poc else Vpoc[1];
def V1poc     = if thisDay == V1daysback + if vday == 1 then 1 else 0  and SecondsFromTime(begin) >= 0 then poc else V1poc[1];
def V2poc     = if thisDay == V2daysback + if vday == 1 then 1 else 0  and SecondsFromTime(begin) >= 0 then poc else V2poc[1];
def V3poc     = if thisDay == V3daysback + if vday == 1 then 1 else 0  and SecondsFromTime(begin) >= 0 then poc else V3poc[1];
def V4poc     = if thisDay == V4daysback + if vday == 1 then 1 else 0  and SecondsFromTime(begin) >= 0 then poc else V4poc[1];

plot Vpoc1   = if showonexpansion and !IsNaN(close) or thisDay > Vdaysback then Double.NaN else Vpoc;
plot V1poc1  = if showonexpansion and !IsNaN(close) or thisDay > V1daysback then Double.NaN else V1poc;
plot V2poc1  = if showonexpansion and !IsNaN(close) or thisDay > V2daysback then Double.NaN else V2poc;
plot V3poc1  = if showonexpansion and !IsNaN(close) or thisDay > V3daysback then Double.NaN else V3poc;
plot V4poc1  = if showonexpansion and !IsNaN(close) or thisDay > V4daysback then Double.NaN else V4poc;

Vpoc1.SetDefaultColor(Color.YELLOW);
V1poc1.SetDefaultColor(Color.YELLOW);
V2poc1.SetDefaultColor(Color.YELLOW);
V3poc1.SetDefaultColor(Color.YELLOW);
V4poc1.SetDefaultColor(Color.YELLOW);

Vpoc1.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
V1poc1.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
V2poc1.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
V3poc1.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
V4poc1.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);

vpoc1.sethiding(hide_non_avg_plots);
v1poc1.sethiding(hide_non_avg_plots);
v2poc1.sethiding(hide_non_avg_plots);
v3poc1.sethiding(hide_non_avg_plots);
v4poc1.sethiding(hide_non_avg_plots);

######### Average of Vpocs

def avgpoc = if isnan(close) then avgpoc[1]
             else if GetDay() != GetLastDay() then Double.NaN
             else (Vpoc1 + V1poc1 + V2poc1 + V3poc1 + V4poc1) / 5;
plot AvgVpoc1 = avgpoc;
AvgVpoc1.SetDefaultColor(Color.CYAN);
AvgVpoc1.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
AvgVpoc1.SetLineWeight(3);

AddLabel(1, "Avg Vpoc: " + AsText(AvgVpoc1), Color.CYAN);

######### Bubbles

input showbubbles = no;
input bubblemover = 2;
def b  = bubblemover;
def b1 = b + 1;
def mover = showbubbles and !IsNaN(close[b1]) and IsNaN(close[b]);

AddChartBubble(mover, AvgVpoc1, "AV", AvgVpoc1.TakeValueColor());
AddChartBubble(mover, Vpoc1, "V" + (Vdaysback + if vday == 1 then 1 else 0), Vpoc1.TakeValueColor());
AddChartBubble(mover, V1poc1, "V" + (V1daysback + if v1day == 1 then 1 else 0), V1poc1.TakeValueColor());
AddChartBubble(mover, V2poc1, "V" + (V2daysback + if v2day == 1 then 1 else 0), V2poc1.TakeValueColor());
AddChartBubble(mover, V3poc1, "V" + (V3daysback + if v3day == 1 then 1 else 0), V3poc1.TakeValueColor());
AddChartBubble(mover, V4poc1, "V" + (V4daysback + if v4day == 1 then 1 else 0), V4poc1.TakeValueColor());

#
 

Not the exact question you're looking for?

Start a new thread and receive assistance from our community.

87k+ Posts
286 Online
Create Post

The Market Trading Game Changer

Join 2,500+ subscribers inside the useThinkScript VIP Membership Club
  • Exclusive indicators
  • Proven strategies & setups
  • Private Discord community
  • ‘Buy The Dip’ signal alerts
  • Exclusive members-only content
  • Add-ons and resources
  • 1 full year of unlimited support

Frequently Asked Questions

What is useThinkScript?

useThinkScript is the #1 community of stock market investors using indicators and other tools to power their trading strategies. Traders of all skill levels use our forums to learn about scripting and indicators, help each other, and discover new ways to gain an edge in the markets.

How do I get started?

We get it. Our forum can be intimidating, if not overwhelming. With thousands of topics, tens of thousands of posts, our community has created an incredibly deep knowledge base for stock traders. No one can ever exhaust every resource provided on our site.

If you are new, or just looking for guidance, here are some helpful links to get you started.

What are the benefits of VIP Membership?
VIP members get exclusive access to these proven and tested premium indicators: Buy the Dip, Advanced Market Moves 2.0, Take Profit, and Volatility Trading Range. In addition, VIP members get access to over 50 VIP-only custom indicators, add-ons, and strategies, private VIP-only forums, private Discord channel to discuss trades and strategies in real-time, customer support, trade alerts, and much more. Learn all about VIP membership here.
How can I access the premium indicators?
To access the premium indicators, which are plug and play ready, sign up for VIP membership here.
Back
Top