Repaints Moxie for ThinkorSwim

Repaints
Please check this image, I see a very strong move after this scenario.

Shake bulls --> failed breakout
Shake bulls --> failed breakdowns

Os2uavL.png


How can we scan for this scenario?
 
Define "failed breakout" in a way that ThinkorSwim can identify such pattern.
 
rad14733 said:
@yaarione Do you have any additional information other than just highlighted candles...???
Click to expand...
This script pointing all lows and highs!! but, what I am looking for is to find
1. a recent HIGH and LOW(price is here marked on the image)
2. previous LOW and previous HIGH
3. if previous HIGH and LOW are inside recent HIGH and LOW then look for price crossing above previous LOW

wRmIEIl.png


Code: 
def swinghigh = if high > high[1] and high > high[2] and high > high[-1] and high > high[-2] then 1 else 0;

Def swinglow = if low < low[1] and low < low[2] and low < low[-1] and low < low[-2] then 1 else 0;


Plot sh = if swinghigh then high else double.nan;
Plot sl = if swinglow then low else double.nan;
sh.setstyle(curve.points);
sl.setstyle(curve.points);
 
Hi @yaarione ,
- I saw both links/posts
- Can you share some complete charts? Say specific tickets and timeframes that this has happened? For example: AMZN on 01/03/21 at 2 PM and price crossed a critical level of $x. The underlying chart was set to 5 D/5M.
- I usually have to play with charts and get a feel, if that makes sense

regards,
Raj
 
@cswu1211

Code: 
# Swing High and Swing Low
# tomsk
# 11.18.2019

# As requested by chillc15 I have modified [USER=1174]@RobertPayne[/USER] code to include SwingHigh
# points which are now plotted in CYAN with the swing high points painted in PINK.
# So now you have both swing high and low on your charts

#  +------------------------------------------------------------+
#  |  Example: How to extend levels to the right of the chart   |
#  |                        Robert Payne                        |
#  |               [URL]https://funwiththinkscript.com[/URL]               |
#  +------------------------------------------------------------+

# SWING LOW

# define swing low points
input length = 10;
def bn = BarNumber();
def lastBar = HighestAll(if IsNaN(close) then 0 else bn);
def offset = Min(length - 1, lastBar - bn);
def swingLow = low < Lowest(low[1], length - 1) and low == GetValue(Lowest(low, length), -offset);

# identify the very last swing low point
def lowPointOneBarNumber = HighestAll(if swingLow then bn else 0);
def lowPointOneValue = if bn == lowPointOneBarNumber then low else lowPointOneValue[1];
plot low1 = if bn < lowPointOneBarNumber then Double.NaN else lowPointOneValue;
low1.SetDefaultColor(Color.LIGHT_RED);

# identify the 2nd to last swing low point
def lowPointTwoBarNumber = HighestAll(if swingLow and bn < lowPointOneBarNumber then bn else 0);
def lowPointTwoValue = if bn == lowPointTwoBarNumber then low else lowPointTwoValue[1];
plot low2 = if bn < lowPointTwoBarNumber then Double.NaN else lowPointTwoValue;
low2.SetDefaultColor(Color.Light_RED);

# just keep doing ths for as many lines as you want to add to the chart
# identify then 3rd to last swingHigh point low
def lowPointThreeBarNumber = HighestAll(if swingLow and bn < lowPointTwoBarNumber then bn else 0);
def lowPointThreeValue = if bn == lowPointThreeBarNumber then low else lowPointThreeValue[1];
plot low3 = if bn < lowPointThreeBarNumber then Double.NaN else lowPointThreeValue;
low3.SetDefaultColor(Color.Light_RED);

# identify then 4th to last swingHigh point low
def lowPointFourBarNumber = HighestAll(if swingLow and bn < lowPointThreeBarNumber then bn else 0);
def lowPointFourValue = if bn == lowPointFourBarNumber then low else lowPointFourValue[1];
plot low4 = if bn < lowPointFourBarNumber then Double.NaN else lowPointFourValue;
low4.SetDefaultColor(Color.Light_RED);

# identify then 5th to last swingHigh point low
def lowPointFiveBarNumber = HighestAll(if swingLow and bn < lowPointFourBarNumber then bn else 0);
def lowPointFiveValue = if bn == lowPointFiveBarNumber then low else lowPointFiveValue[1];
plot low5 = if bn < lowPointFiveBarNumber then Double.NaN else lowPointFiveValue;
low5.SetDefaultColor(Color.Light_RED);

# identify then 6th to last swingHigh point low
def lowPointSixBarNumber = HighestAll(if swingLow and bn < lowPointFiveBarNumber then bn else 0);
def lowPointSixValue = if bn == lowPointSixBarNumber then low else lowPointSixValue[1];
plot low6 = if bn < lowPointSixBarNumber then Double.NaN else lowPointSixValue;
low6.SetDefaultColor(Color.Light_RED);

# identify then 7th to last swingHigh point low
def lowPointSevenBarNumber = HighestAll(if swingLow and bn < lowPointSixBarNumber then bn else 0);
def lowPointSevenValue = if bn == lowPointSevenBarNumber then low else lowPointSevenValue[1];
plot low7 = if bn < lowPointSevenBarNumber then Double.NaN else lowPointSevenValue;
low7.SetDefaultColor(Color.Light_RED);

# identify then 8th to last swingHigh point low
def lowPointEightBarNumber = HighestAll(if swingLow and bn < lowPointSevenBarNumber then bn else 0);
def lowPointEightValue = if bn == lowPointEightBarNumber then low else lowPointEightValue[1];
plot low8 = if bn < lowPointEightBarNumber then Double.NaN else lowPointEightValue;
low8.SetDefaultColor(Color.Light_RED);

# identify then 9th to last swingHigh point low
def lowPointNineBarNumber = HighestAll(if swingLow and bn < lowPointEightBarNumber then bn else 0);
def lowPointNineValue = if bn == lowPointNineBarNumber then low else lowPointNineValue[1];
plot low9 = if bn < lowPointNineBarNumber then Double.NaN else lowPointNineValue;
low9.SetDefaultColor(Color.Light_RED);

# identify then 10th to last swingHigh point low
def lowPointTenBarNumber = HighestAll(if swingLow and bn < lowPointNineBarNumber then bn else 0);
def lowPointTenValue = if bn == lowPointTenBarNumber then low else lowPointTenValue[1];
plot low10 = if bn < lowPointTenBarNumber then Double.NaN else lowPointTenValue;
low10.SetDefaultColor(Color.Light_RED);





# SWING HIGH

# define swing high points
def swingHigh = high > Highest(high[1], length - 1) and high == GetValue(Highest(high, length), -offset);

# identify the very last swing high point
def highPointOneBarNumber = HighestAll(if swingHigh then bn else 0);
def highPointOneValue = if bn == highPointOneBarNumber then high else highPointOneValue[1];
plot high1 = if bn <  highPointOneBarNumber then Double.NaN else highPointOneValue;
high1.SetDefaultColor(Color.CYAN);

# identify the 2nd to last swing high point
def highPointTwoBarNumber = HighestAll(if swingHigh and bn < highPointOneBarNumber then bn else 0);
def highPointTwoValue = if bn == highPointTwoBarNumber then high else highPointTwoValue[1];
plot high2 = if bn < highPointTwoBarNumber then Double.NaN else highPointTwoValue;
high2.SetDefaultColor(Color.CYAN);

# just keep doing ths for as many lines as you want to add to the chart

def highPointThreeBarNumber = HighestAll(if swingHigh and bn < highPointTwoBarNumber then bn else 0);
def highPointThreeValue = if bn == highPointThreeBarNumber then high else highPointThreeValue[1];
plot high3 = if bn < highPointThreeBarNumber then Double.NaN else highPointThreeValue;
high3.SetDefaultColor(Color.CYAN);

def highPointFourBarNumber = HighestAll(if swingHigh and bn < highPointThreeBarNumber then bn else 0);
def highPointFourValue = if bn == highPointFourBarNumber then high else highPointFourValue[1];
plot high4 = if bn < highPointFourBarNumber then Double.NaN else highPointFourValue;
high4.SetDefaultColor(Color.CYAN);

def highPointFiveBarNumber = HighestAll(if swingHigh and bn < highPointFourBarNumber then bn else 0);
def highPointFiveValue = if bn == highPointFiveBarNumber then high else highPointFiveValue[1];
plot high5 = if bn < highPointFiveBarNumber then Double.NaN else highPointFiveValue;
high5.SetDefaultColor(Color.CYAN);

def highPointSixBarNumber = HighestAll(if swingHigh and bn < highPointFiveBarNumber then bn else 0);
def highPointSixValue = if bn == highPointSixBarNumber then high else highPointSixValue[1];
plot high6 = if bn < highPointsixBarNumber then Double.NaN else highPointsixValue;
high6.SetDefaultColor(Color.CYAN);

def highPointSevenBarNumber = HighestAll(if swingHigh and bn < highPointSixBarNumber then bn else 0);
def highPointSevenValue = if bn == highPointSevenBarNumber then high else highPointSevenValue[1];
plot high7 = if bn < highPointSevenBarNumber then Double.NaN else highPointSevenValue;
high7.SetDefaultColor(Color.CYAN);

def highPointEightBarNumber = HighestAll(if swingHigh and bn < highPointSevenBarNumber then bn else 0);
def highPointEightValue = if bn == highPointEightBarNumber then high else highPointEightValue[1];
plot high8 = if bn < highPointEightBarNumber then Double.NaN else highPointEightValue;
high4.SetDefaultColor(Color.CYAN);

def highPointNineBarNumber = HighestAll(if swingHigh and bn < highPointEightBarNumber then bn else 0);
def highPointNineValue = if bn == highPointNineBarNumber then high else highPointNineValue[1];
plot high9 = if bn < highPointNineBarNumber then Double.NaN else highPointNineValue;
high4.SetDefaultColor(Color.CYAN);

def highPointTenBarNumber = HighestAll(if swingHigh and bn < highPointNineBarNumber then bn else 0);
def highPointTenValue = if bn == highPointTenBarNumber then high else highPointTenValue[1];
plot high10 = if bn < highPointTenBarNumber then Double.NaN else highPointTenValue;
high4.SetDefaultColor(Color.CYAN);



# ADJUST CANDLE COLORS

# change candle colors just to make it easier to see what we are working with

AssignPriceColor(if swingLow then Color.cyan else if swingHigh then Color.mageNTA else Color.current);
# End Swing High and Swing Low
 
@RajB Feedback regarding Broadening Pattern, observed the Broadening Pattern in XLNX yesterday with positive momentum at Friday close. Stock has a nice run at market open Monday morning.

Could anyone else please confirm their experience with the Broadening Pattern?
 
@tenacity11 @BenTen Looking at the swing high and swing low script. It will be a killer with BTD if we could predict such moves of swing high/low. I understand it could repaint as we go in to the future. However, I have two questions? Forgive my newbeeness.
1. How many candles or bars or time does it take for it to not repaint? From the default script it looks like mostly it takes 10 candles? Am i right?
2. Also, you guys being a pro in the forum, can someone suggest any other script that could go well with the swing high and low script (or zig zag scripts) to confirm the reversal without repainting? Like RSI-Lagurre/TTM Squeeze? Thank You.
 
Last edited:
@Earthian There is no exact number of candles/bars to eliminate repainting but it's "usually" until after the candle/bar closes - but not always... It all depends on how many criteria the study/indicator is derived from...

As for your second question, neither of the indicators you mentioned are intended to indicate trend reversal, per se, but lower indicators especially oscillators work better for indicating trade entries and exits... It isn't good trading practice to attempt to get in and out at the very top or bottom of a trend... Your trading style also comes into play, whether scalping, day trading, swing trading, or long term investing... Which categories you fall into will help determine which indicators might best suit your needs... What might those be...???
 
Thanks @rad14733 😃 I get your point. I intend to scalp /ES for 2-3 points and swing trade vertical spreads. I am curious to know what oscillators you have witnessed from your experience work well for these scenarios 👍🏻
 
Last edited:
@Earthian I'm not fond of using true oscillators but prefer histograms instead... I'd suggest taking a look at THIS trading strategy that was started by @Hypoluxa for trading SPX... I have played with that combination and have also swapped several of my other favorite indicators into the mix... I usually modify indicators to my liking, most notably the TOS MACD_Histogram and ErgodicOsc indicators... The ErgodicOsc being one of the indicators that @Hypoluxa also uses in his trading system... I have used quite a few indicators extensively but am always playing with different indicators, some of which may not be popular with the masses, and like I stated, I tweak them to my liking... My advice would be to set up several charts with a couple indicators each and determine which ones you are most comfortable with... Don't just jump on what may seem to be the latest popular indicator, however... Make your own decisions because it will be your money at stake... If you have additional questions, ask away in the appropriate topic or start one that we can better assist you in without derailing existing unrelated topics...

Hope this helps... Other members may also chime in with suggestions...
 
Many of the books I've read have trading setups which have a series of conditions which must be met and those may happen all over several days. While I am able to write some intermediate-level scripts I haven't been able to figure out how to wait until the multiple conditions are met before raising a signal.

As an example, in Chapter 6 of Explosive Stock Trading Strategies (Explosive Stock Trading Strategies: Samir Elias: 9780984638703: AmazonSmile: Books) the author details a scalping setup for stocks which requires the following steps:
1) Identify a minor support day by finding a peak-valley-peak pattern on the daily chart. Specifically (close[1] > close and close < close[-1])

2) Day "1" is the first day after the minor support day that close < minor support day close

3) Day "2" is the first day after Day "1" where close < Day "1" close

4) Day "3" is the first day after Day "2" where low < Day "2" close

5) The trigger day for the trade is the next day after Day "3".

What is the best way to represent these sequence of conditions in thinkScript?
 
Thank you for responding.

Using the Chart Pattern creation wizard it seems straightforward to create the minor support day pattern in step 1 above. For steps 2-5, however, is it possible to wait an arbitrary number of days until each condition is true?
 
Hello Coders,

I just want to ask if the code below can be converted for my watchlist with matching color CYAN,MAGENTA. This code is not mine as you can tell from code below but i just want to use it for my watchlist. Thank you, have a great day!


Code: 
# Swing High and Swing Low
# tomsk
# 11.18.2019
# As requested by chillc15 I have modified [USER=1174]@RobertPayne[/USER] code to include SwingHigh
# points which are now plotted in CYAN with the swing high points painted in PINK.
# So now you have both swing high and low on your charts
#  +------------------------------------------------------------+
# | Example: How to extend levels to the right of the chart |
# | Robert Payne |
# | https://funwiththinkscript.com |
#  +------------------------------------------------------------+
# SWING LOW
# define swing low points
input length = 10;
def bn = BarNumber();
def lastBar = HighestAll(if IsNaN(close) then 0 else bn);
def offset = Min(length - 1, lastBar - bn);
def swingLow = low < Lowest(low[1], length - 1) and low == GetValue(Lowest(low, length), -offset);
# identify the very last swing low point
def lowPointOneBarNumber = HighestAll(if swingLow then bn else 0);
def lowPointOneValue = if bn == lowPointOneBarNumber then low else lowPointOneValue[1];
plot low1 = if bn < lowPointOneBarNumber then Double.NaN else lowPointOneValue;
low1.SetDefaultColor(Color.LIGHT_RED);
# identify the 2nd to last swing low point
def lowPointTwoBarNumber = HighestAll(if swingLow and bn < lowPointOneBarNumber then bn else 0);
def lowPointTwoValue = if bn == lowPointTwoBarNumber then low else lowPointTwoValue[1];
plot low2 = if bn < lowPointTwoBarNumber then Double.NaN else lowPointTwoValue;
low2.SetDefaultColor(Color.Light_RED);
# just keep doing ths for as many lines as you want to add to the chart
# identify then 3rd to last swingHigh point low
def lowPointThreeBarNumber = HighestAll(if swingLow and bn < lowPointTwoBarNumber then bn else 0);
def lowPointThreeValue = if bn == lowPointThreeBarNumber then low else lowPointThreeValue[1];
plot low3 = if bn < lowPointThreeBarNumber then Double.NaN else lowPointThreeValue;
low3.SetDefaultColor(Color.Light_RED);
# identify then 4th to last swingHigh point low
def lowPointFourBarNumber = HighestAll(if swingLow and bn < lowPointThreeBarNumber then bn else 0);
def lowPointFourValue = if bn == lowPointFourBarNumber then low else lowPointFourValue[1];
plot low4 = if bn < lowPointFourBarNumber then Double.NaN else lowPointFourValue;
low4.SetDefaultColor(Color.Light_RED);
# identify then 5th to last swingHigh point low
def lowPointFiveBarNumber = HighestAll(if swingLow and bn < lowPointFourBarNumber then bn else 0);
def lowPointFiveValue = if bn == lowPointFiveBarNumber then low else lowPointFiveValue[1];
plot low5 = if bn < lowPointFiveBarNumber then Double.NaN else lowPointFiveValue;
low5.SetDefaultColor(Color.Light_RED);
# identify then 6th to last swingHigh point low
def lowPointSixBarNumber = HighestAll(if swingLow and bn < lowPointFiveBarNumber then bn else 0);
def lowPointSixValue = if bn == lowPointSixBarNumber then low else lowPointSixValue[1];
plot low6 = if bn < lowPointSixBarNumber then Double.NaN else lowPointSixValue;
low6.SetDefaultColor(Color.Light_RED);
# identify then 7th to last swingHigh point low
def lowPointSevenBarNumber = HighestAll(if swingLow and bn < lowPointSixBarNumber then bn else 0);
def lowPointSevenValue = if bn == lowPointSevenBarNumber then low else lowPointSevenValue[1];
plot low7 = if bn < lowPointSevenBarNumber then Double.NaN else lowPointSevenValue;
low7.SetDefaultColor(Color.Light_RED);
# identify then 8th to last swingHigh point low
def lowPointEightBarNumber = HighestAll(if swingLow and bn < lowPointSevenBarNumber then bn else 0);
def lowPointEightValue = if bn == lowPointEightBarNumber then low else lowPointEightValue[1];
plot low8 = if bn < lowPointEightBarNumber then Double.NaN else lowPointEightValue;
low8.SetDefaultColor(Color.Light_RED);
# identify then 9th to last swingHigh point low
def lowPointNineBarNumber = HighestAll(if swingLow and bn < lowPointEightBarNumber then bn else 0);
def lowPointNineValue = if bn == lowPointNineBarNumber then low else lowPointNineValue[1];
plot low9 = if bn < lowPointNineBarNumber then Double.NaN else lowPointNineValue;
low9.SetDefaultColor(Color.Light_RED);
# identify then 10th to last swingHigh point low
def lowPointTenBarNumber = HighestAll(if swingLow and bn < lowPointNineBarNumber then bn else 0);
def lowPointTenValue = if bn == lowPointTenBarNumber then low else lowPointTenValue[1];
plot low10 = if bn < lowPointTenBarNumber then Double.NaN else lowPointTenValue;
low10.SetDefaultColor(Color.Light_RED);


# SWING HIGH
# define swing high points
def swingHigh = high > Highest(high[1], length - 1) and high == GetValue(Highest(high, length), -offset);
# identify the very last swing high point
def highPointOneBarNumber = HighestAll(if swingHigh then bn else 0);
def highPointOneValue = if bn == highPointOneBarNumber then high else highPointOneValue[1];
plot high1 = if bn < highPointOneBarNumber then Double.NaN else highPointOneValue;
high1.SetDefaultColor(Color.CYAN);
# identify the 2nd to last swing high point
def highPointTwoBarNumber = HighestAll(if swingHigh and bn < highPointOneBarNumber then bn else 0);
def highPointTwoValue = if bn == highPointTwoBarNumber then high else highPointTwoValue[1];
plot high2 = if bn < highPointTwoBarNumber then Double.NaN else highPointTwoValue;
high2.SetDefaultColor(Color.CYAN);
# just keep doing ths for as many lines as you want to add to the chart
def highPointThreeBarNumber = HighestAll(if swingHigh and bn < highPointTwoBarNumber then bn else 0);
def highPointThreeValue = if bn == highPointThreeBarNumber then high else highPointThreeValue[1];
plot high3 = if bn < highPointThreeBarNumber then Double.NaN else highPointThreeValue;
high3.SetDefaultColor(Color.CYAN);
def highPointFourBarNumber = HighestAll(if swingHigh and bn < highPointThreeBarNumber then bn else 0);
def highPointFourValue = if bn == highPointFourBarNumber then high else highPointFourValue[1];
plot high4 = if bn < highPointFourBarNumber then Double.NaN else highPointFourValue;
high4.SetDefaultColor(Color.CYAN);
def highPointFiveBarNumber = HighestAll(if swingHigh and bn < highPointFourBarNumber then bn else 0);
def highPointFiveValue = if bn == highPointFiveBarNumber then high else highPointFiveValue[1];
plot high5 = if bn < highPointFiveBarNumber then Double.NaN else highPointFiveValue;
high5.SetDefaultColor(Color.CYAN);
def highPointSixBarNumber = HighestAll(if swingHigh and bn < highPointFiveBarNumber then bn else 0);
def highPointSixValue = if bn == highPointSixBarNumber then high else highPointSixValue[1];
plot high6 = if bn < highPointsixBarNumber then Double.NaN else highPointsixValue;
high6.SetDefaultColor(Color.CYAN);
def highPointSevenBarNumber = HighestAll(if swingHigh and bn < highPointSixBarNumber then bn else 0);
def highPointSevenValue = if bn == highPointSevenBarNumber then high else highPointSevenValue[1];
plot high7 = if bn < highPointSevenBarNumber then Double.NaN else highPointSevenValue;
high7.SetDefaultColor(Color.CYAN);
def highPointEightBarNumber = HighestAll(if swingHigh and bn < highPointSevenBarNumber then bn else 0);
def highPointEightValue = if bn == highPointEightBarNumber then high else highPointEightValue[1];
plot high8 = if bn < highPointEightBarNumber then Double.NaN else highPointEightValue;
high4.SetDefaultColor(Color.CYAN);
def highPointNineBarNumber = HighestAll(if swingHigh and bn < highPointEightBarNumber then bn else 0);
def highPointNineValue = if bn == highPointNineBarNumber then high else highPointNineValue[1];
plot high9 = if bn < highPointNineBarNumber then Double.NaN else highPointNineValue;
high4.SetDefaultColor(Color.CYAN);
def highPointTenBarNumber = HighestAll(if swingHigh and bn < highPointNineBarNumber then bn else 0);
def highPointTenValue = if bn == highPointTenBarNumber then high else highPointTenValue[1];
plot high10 = if bn < highPointTenBarNumber then Double.NaN else highPointTenValue;
high4.SetDefaultColor(Color.CYAN);

# ADJUST CANDLE COLORS
# change candle colors just to make it easier to see what we are working with
AssignPriceColor(if swingLow then Color.cyan else if swingHigh then Color.mageNTA else Color.current);
# End Swing High and Swing Low
 
@tradeidea20 @Mosd You can keep asking but no matter where you post or where it is moved, it won't get you an answer. I don't know any omnitraders on this forum, who would be able to convert your code.

For future reference, if you post a question and don't get an answer, it is not because your post wasn't viewed as this is a very active forum, it's because no one can help you.
 
Thanks for reaching out @merrydad.

Do you know what it would require to build such a indicator for tos? What details do i need to know about wave trader 3?
 
You must log in or register to reply here.

Join useThinkScript to post your question to a community of 21,000+ developers and traders.

SIGN UP NOW LEARN MORE
Thread starter Similar threads Forum Replies Date
M Repaints MTF Moxie Indicator for ThinkorSwim Indicators 71
bulusufinances Repaints Cup and Handle Indicator for ThinkorSwim Indicators 23
samer800 The Ultimate Buy and Sell Indicator for ThinkOrSwim Indicators 5
S SharkWaveTrend For ThinkOrSwim Indicators 44
samer800 Repaints Smart Money Breakouts [ChartPrime] for ThinkOrSwim Indicators 15

Similar threads

Not the exact question you're looking for?

Start a new thread and receive assistance from our community.

87k+ Posts
334 Online
Create Post

Similar threads

Similar threads

The Market Trading Game Changer

Join 2,500+ subscribers inside the useThinkScript VIP Membership Club
  • Exclusive indicators
  • Proven strategies & setups
  • Private Discord community
  • ‘Buy The Dip’ signal alerts
  • Exclusive members-only content
  • Add-ons and resources
  • 1 full year of unlimited support
Try VIP Club Today

Frequently Asked Questions

What is useThinkScript?

useThinkScript is the #1 community of stock market investors using indicators and other tools to power their trading strategies. Traders of all skill levels use our forums to learn about scripting and indicators, help each other, and discover new ways to gain an edge in the markets.

How do I get started?

We get it. Our forum can be intimidating, if not overwhelming. With thousands of topics, tens of thousands of posts, our community has created an incredibly deep knowledge base for stock traders. No one can ever exhaust every resource provided on our site.

If you are new, or just looking for guidance, here are some helpful links to get you started.

What are the benefits of VIP Membership?
VIP members get exclusive access to these proven and tested premium indicators: Buy the Dip, Advanced Market Moves 2.0, Take Profit, and Volatility Trading Range. In addition, VIP members get access to over 50 VIP-only custom indicators, add-ons, and strategies, private VIP-only forums, private Discord channel to discuss trades and strategies in real-time, customer support, trade alerts, and much more. Learn all about VIP membership here.
How can I access the premium indicators?
To access the premium indicators, which are plug and play ready, sign up for VIP membership here.
Back
Top