Auto Fib (Fibonacci) Levels Indicator for ThinkorSwim

Join useThinkScript to post your question to a community of 21,000+ developers and traders.

@BLT is there a way to make it mobile friendly I dont want the fib levels just want the High Low . When i put study in it squishes the candles together hard to see and when study isnt used candles are normal . Thanks
joN8G0j.jpg
gGsu4K8.jpg
 

Attachments

  • joN8G0j.jpg
    joN8G0j.jpg
    459 KB · Views: 350
Been looking all over for an combined fibonacci level study...saw one that only printed two levels of support and resistance within a specific price range and updated these when the candles broke through. Any help would be appreciated...it really declutters the chart and was very accurate in predicting bullish and bearish moves.
 
Added a scanning capability for retracements as described in the header of the following study. Please save the study as: SwingHL_Fibs_v14 to use the study in the scanner
Code:
#SwingHL_Fibs_v14
#v1    - 01.19.2020 - BLT - Swing High/Low with options to show all swings or last swing, fib levels, number of swings to display fib levels, and chart bubbles identifying swings and fib levels. The fib bubbles can be moved left/right in the expansion by the number of bars at the input: bubble_mover
#v1.2  - 01.19.2020 - BLT - Made fib bubbles automatically reflect fib level inputs, which were hard coded in v1
#v1.3  - 01.20.2020 - BLT - Added more fib lines, adjusted fib levels based upon whether r2 is 100%, and extended fib lines into all of expansion
#v1.4  - 01.20.2020 - BLT - Added a scan capability for fib retracement levels. The plot: lastswing determines by being 1 or 0 the fib percentage levels as in the following Table

#Table to determine retracement fib levels for scan purposes
#lastswing ==   1 (100%)     0  (0%)  Upper Level of most recent swing
#fib1      ==   23.6%        76.4%
#fib2      ==   38.2%        61.8%
#fibm      ==   50.0%        50.0%
#fib3      ==   61.8%        38.2%
#fib4      ==   76.4%        23.6%

#Example Scan #1 requested where close > 61.8% and lastswing = 1 (100%) with this studies name saved as: SwingHL_Fibs_v14
  #In Scanner enter: close > SwingHL_Fibs_v14().fib3 and SwingHL_Fibs_v14().lastswing is equal to 1

#Example Scan #2 where close crosses above 61.8% within "x" bars and lastswing = 1 (100%) with this studies name saved as: SwingHL_Fibs_v14
  #In Scanner enter: close crosses above SwingHL_Fibs_v14().fib3 within 3 bars and SwingHL_Fibs_v14().lastswing is equal to 1

input showlastswing = yes;
input swing_back1 = 5;
input swing_forward1 = 5;
input maxbars1 = 30;

def na = Double.NaN;
def bn = barnumber();
def sb1 = swing_back1;
def sf1 = swing_forward1;
def lfor1 = Lowest(low, sf1)[-sf1];
def lback1 = Lowest(low, sb1)[1];
def swinglow1 = if low < lfor1 and low < lback1 then 1 else 0;
def swinglowbar = if low < lfor1 and low < lback1 then bn else na;
def hfor1  = Highest(high, sf1)[-sf1];
def hback1 = Highest(high, sb1)[1];
def swinghigh1   = if high > hfor1 and high > hback1 then 1 else 0;
def swinghighbar = if high > hfor1 and high > hback1 then bn else na;
plot lastswing    = highestall(swinghighbar)>highestall(swinglowbar);

#Swings identifed as points
plot r2 = if showlastswing ==yes and bn==highestall(swinghighbar) then high else if showlastswing == no and swinghigh1 then high else na;
plot s2 = if showlastswing == yes and bn==highestall(swinglowbar) then low else if showlastswing == no and swinglow1 then low else na;

r2.SetStyle(Curve.POINTS);
r2.SetLineWeight(4);
r2.SetDefaultColor(Color.GREEN);
r2.HideBubble();
s2.SetStyle(Curve.POINTS);
s2.SetLineWeight(4);
s2.SetDefaultColor(Color.RED);
s2.HideBubble();

input bubbleoffsetfactor  = 3;
input showbubbles_r2s2    = yes;
AddChartBubble(showbubbles_r2s2 and r2, high + TickSize() * bubbleoffsetfactor, "R2", Color.GREEN, yes);
AddChartBubble(showbubbles_r2s2 and s2, low - TickSize() * bubbleoffsetfactor, "S2", Color.RED, no);

#Store Previous Data
def r2save = if !IsNaN(r2) then r2 else r2save[1];
def s2save = if !IsNaN(s2) then s2 else s2save[1];

#Fibonacci

input numberfibstoshow = 1;

#Retracement Fibonacci Levels
input fib1level           = .236;
input fib2level           = .382;
input fibMlevel           = .500;
input fib3level           = .618;
input fib4level           = .764;

#Extended Fibonacci Levels - These will create complementary extensions below zero as well as those inputs below which are over 1

input fib5extlevel        = 1.272;
input fib6extlevel        = 1.618;
input fib7extlevel        = 2.618;
input fib8extlevel        = 4.236;

#Fibonacci Lines
def fibh  = r2save;
def fibl  = s2save;
def range = if isnan(close) then range[1] else fibh - fibl;
def data  = CompoundValue(1, if (r2save == high) and range<0 or (s2save == low) and range>0 then data[1] + 1 else data[1], 0);
def datacount = if isnan(close) then datacount[1] else (HighestAll(data) - data[1]) + 1;

input showfiblines = yes;

plot fibHp = r2save;
plot fibLp = s2save;
def fibmext=if !isnan(fibl + range * fibMlevel) then fibmext[1] else fibl + range * fibMlevel;
plot fibM  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fibMlevel else na;
plot fib1  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib1level else na;
plot fib2  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib2level else na;
plot fib3  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib3level else na;
plot fib4  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib4level else na;

plot fib5  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib5extlevel else na;
plot fib6  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib6extlevel else na;
plot fib7  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib7extlevel else na;
plot fib8  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib8extlevel else na;

plot fib5a  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibh + range * -fib5extlevel else na;
plot fib6a  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibh + range * -fib6extlevel else na;
plot fib7a  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibh + range * -fib7extlevel else na;
plot fib8a  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibh + range * -fib8extlevel else na;

fibHp.SetPaintingStrategy(PaintingStrategy.DASHES);
fibLp.SetPaintingStrategy(PaintingStrategy.DASHES);
fibHp.SetLineWeight(2);
fibLp.SetLineWeight(2);
fibM.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib1.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib2.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib3.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib4.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib5.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib6.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib7.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib8.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib5a.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib6a.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib7a.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib8a.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fibHp.SetDefaultColor(Color.GREEN);
fibLp.SetDefaultColor(Color.RED);
fibM.SetDefaultColor(Color.WHITE);
fib1.SetDefaultColor(Color.CYAN);
fib2.SetDefaultColor(Color.YELLOW);
fib3.SetDefaultColor(Color.YELLOW);
fib4.SetDefaultColor(Color.CYAN);
fib5.setdefaultColor(color.yellow);
fib6.setdefaultColor(color.yellow);
fib7.setdefaultColor(color.yellow);
fib8.setdefaultColor(color.yellow);
fib5a.setdefaultColor(color.yellow);
fib6a.setdefaultColor(color.yellow);
fib7a.setdefaultColor(color.yellow);
fib8a.setdefaultColor(color.yellow);

#To Hide Price Bubbles on Right Axis, remove the "#" sign on the following HideBubble() code
#fibM.HideBubble();
#fib1.HideBubble();
#fib2.HideBubble();
#fib3.HideBubble();
#fib4.HideBubble();
#fib5.HideBubble();
#fib6.HideBubble();
#fib7.HideBubble();
#fib8.HideBubble();
#fib5a.HideBubble();
#fib6a.HideBubble();
#fib7a.HideBubble();
#fib8a.HideBubble();

input showfib_bubbles = yes;
input bubble_mover    = 5; #Moves bubbles left/right then number of bars input here
def   n               = bubble_mover;
def   n1              = n +1;
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fibh[n1],  aspercent(if !lastswing then 1 else 0), Color.green, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fibl[n1],  aspercent(if !lastswing then 0 else 1), Color.red, yes);

#Fib Retracement Level Chart Bubbles
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib1[n1],  if !lastswing then aspercent(fib1level) else aspercent(1-fib1level), Color.cyan, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib2[n1],  if !lastswing then aspercent(fib2level) else aspercent(1-fib2level), Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib3[n1],  if !lastswing then aspercent(fib3level) else aspercent(1-fib3level), Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib4[n1],  if !lastswing then aspercent(fib4level) else aspercent(1-fib4level), Color.cyan, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fibm[n1],  if !lastswing then aspercent(fibmlevel) else aspercent(1-fibmlevel), Color.white, yes);

#Fib Extension Levels Chart Bubbles
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib5[n1], if lastswing then aspercent(1-fib5extlevel) else aspercent(fib5extlevel) , Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib6[n1], if lastswing then  aspercent(1-fib6extlevel) else aspercent(fib6extlevel), Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib7[n1], if lastswing then aspercent(1-fib7extlevel) else aspercent(fib7extlevel), Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib8[n1], if lastswing then aspercent(1-fib8extlevel) else aspercent(fib8extlevel), Color.yellow, yes);

AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib5a[n1], if lastswing then aspercent(fib5extlevel) else aspercent(1-fib5extlevel) , Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib6a[n1], if lastswing then aspercent(fib6extlevel) else aspercent(1-fib6extlevel), Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib7a[n1], if lastswing then aspercent(fib7extlevel) else aspercent(1-fib7extlevel), Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib8a[n1], if lastswing then aspercent(fib8extlevel) else aspercent(1-fib8extlevel), Color.yellow, yes);

question:
if i want to use the scanner to scan for fib extension at 0 which is the last line to try to catch a trend reversal
would the code be this?

#In Scanner enter: close > SwingHL_Fibs_v14().fib1 and SwingHL_Fibs_v14().lastswing is equal to 1
 
Hi, Can someone suggest Fib Retracement indicator that can auto plot lines based on the input time range(D,W,M etc)? I found few posts related to what I am looking for but would like to take inputs based on what most of you all have tested already. Thx.
 
Last edited by a moderator:
even I am not seeing price on web as well.

If you add fibonacci drawing..you can price on right hand side. if you can add something like that it will be great
 
ever since i started "trading" i.e. gambling lol 2 months ago i always wondered about an automatic support and resistance tool and just yesterday i learned that thats what people use Fibo retracements for 😆 was literally about to buy ProRealTrend
 
ever since i started "trading" i.e. gambling lol 2 months ago i always wondered about an automatic support and resistance tool and just yesterday i learned that thats what people use Fibo retracements for 😆 was literally about to buy ProRealTrend
I am also doing everything possible to avoid a "Gambling" mindset. Following strict rules instead of desiring more is the way
 
Hello Everyone,
Trying to figure out how to make this Fibonacci. Start from first bar to forth bar, Fibonacci creates pullback on between 50% to 61.8%. Price Target at -23.6% and -61.8%. Tried to make an adjust on Fibonacci Properties and it seems that it doesn't do it what I want. Anyone know how ?

Thanks
ee5eMaJ.jpg
 
Last edited by a moderator:
Can someone add the label for this fib lines script. It's better to have the fib lines next to all the chart candle so it can clear up the look. Thank you

Code:
# autofib - show fib-retracements between chart high/low

input sideline = no;

def f11 = 0.236;
def f12 = 0.382;
def f13 = 0.50;
def f14 = 0.618;
def f15 = 0.786;
def hh = HighestAll(high);
def ll = LowestAll(low);
plot H =
  if isnaN(close) && sideline then
    hh
  else if !isnaN(close) && !sideline then
    hh
  else
    double.NaN
;
plot L =
  if isnaN(close) && sideline then
    ll
  else if !isnaN(close) && !sideline then
    ll
  else
    double.NaN
;
plot P236 =
  if isnaN(close) && sideline then
    hh - ((hh - ll) * f11)
  else if !isnaN(close) && !sideline then
    hh - ((hh - ll) * f11)
  else
    double.NaN
;
plot P382 =
  if isnaN(close) && sideline then
    hh - ((hh - ll) * f12)
  else if !isnaN(close) && !sideline then
    hh - ((hh - ll) * f12)
  else
    double.NaN
;
plot P50 =
  if isnaN(close) && sideline then
    hh - ((hh - ll) * f13)
  else if !isnaN(close) && !sideline then
    hh - ((hh - ll) * f13)
  else
    double.NaN
;
plot P618 =
  if isnaN(close) && sideline then
    hh - ((hh - ll) * f14)
  else if !isnaN(close) && !sideline then
    hh - ((hh - ll) * f14)
  else
    double.NaN
;
plot P781 =
  if isnaN(close) && sideline then
    hh - ((hh - ll) * f15)
  else if !isnaN(close) && !sideline then
    hh - ((hh - ll) * f15)
  else
    double.NaN
;
p236.SetDefaultColor(Color.lIGHT_GRAY);
p382.SetDefaultColor(Color.lIGHT_GRAY);
p50.SetDefaultColor(Color.ORANGE);
p618.SetDefaultColor(Color.lIGHT_GRAY);
p781.SetDefaultColor(Color.lIGHT_GRAY);
H.SetDefaultColor(Color.MAGENTA);
L.SetDefaultColor(Color.MAGENTA);
p236.SetStyle(Curve.LONG_DASH);
p382.SetStyle(Curve.LONG_DASH);
p50.SetStyle(Curve.LONG_DASH);
p618.SetStyle(Curve.LONG_DASH);
p781.SetStyle(Curve.LONG_DASH);
H.SetStyle(Curve.SHORT_DASH);
L.SetStyle(Curve.SHORT_DASH);
H.SetLineWeight(2);
L.SetLineWeight(2);
p50.SetLineWeight(2);
###############################################
 
Last edited by a moderator:
@BLT @BenTen Need your help on this scanner, i'm looking for a condition where the candle closes above S2 & below R2, can you share what is the code i can use in scanner?

i tried "close crosses above SwingHL_Fibs_v14()."s2"" but no luck.
 
Last edited:
@tomsk I was trying to use this to scan, but I ran into some issue not sure how to set the filters. Would you please help me. I'm not sure how to share the image as I'm new user. I selected, plot, scan and crosses above but I can't find retracement2 and upward
Would you please share the screen shot how to use your script scan? Thank you and much appreciated.
 

Similar threads

Not the exact question you're looking for?

Start a new thread and receive assistance from our community.

87k+ Posts
341 Online
Create Post

Similar threads

Similar threads

The Market Trading Game Changer

Join 2,500+ subscribers inside the useThinkScript VIP Membership Club
  • Exclusive indicators
  • Proven strategies & setups
  • Private Discord community
  • ‘Buy The Dip’ signal alerts
  • Exclusive members-only content
  • Add-ons and resources
  • 1 full year of unlimited support

Frequently Asked Questions

What is useThinkScript?

useThinkScript is the #1 community of stock market investors using indicators and other tools to power their trading strategies. Traders of all skill levels use our forums to learn about scripting and indicators, help each other, and discover new ways to gain an edge in the markets.

How do I get started?

We get it. Our forum can be intimidating, if not overwhelming. With thousands of topics, tens of thousands of posts, our community has created an incredibly deep knowledge base for stock traders. No one can ever exhaust every resource provided on our site.

If you are new, or just looking for guidance, here are some helpful links to get you started.

What are the benefits of VIP Membership?
VIP members get exclusive access to these proven and tested premium indicators: Buy the Dip, Advanced Market Moves 2.0, Take Profit, and Volatility Trading Range. In addition, VIP members get access to over 50 VIP-only custom indicators, add-ons, and strategies, private VIP-only forums, private Discord channel to discuss trades and strategies in real-time, customer support, trade alerts, and much more. Learn all about VIP membership here.
How can I access the premium indicators?
To access the premium indicators, which are plug and play ready, sign up for VIP membership here.
Back
Top