Auto Fib (Fibonacci) Levels Indicator for ThinkorSwim

H

horserider

Well-known member
VIP
Warehouse
@soary My apologies. Sounds like you understand the study now.
 
S

soary

Member
No problem horserider. I''m really enjoying them on my charts.
For anyone else that adding auto fib to your chart, click on the study to modify after adding it and click on show bubbles so you can see the labels of the Fib levels, otherwise you'll have the problem I mentioned above where it will show up as only horizontal lines across your entire chart without designation.
 
S

soary

Member
I need help with this fib again. I've been trading low priced stocks so the bubbles are usually overlapping and I didn't notice this before. Today, I was looking at low priced stocks and thought I was seeing two lines with the 50% bubble label, but looked at the SPY on the daily which since it's a higher price ticker the fib lines are spread out and I can see each bubble clearly and saw the problem. For the 50% line there are two bubbles one on top of the other and both bubbles say 50%. it's not an extra line it just that the 50% line has 2 bubbles and this is confusing. I'm not a coder so how do I fix this? Thanks in advance. I can't post a screen shot due to the set up here because that's another learning curve at another site, but the bubbles are one on top of the other. Is it a setting I need to turn off or something?
 
H

horserider

Well-known member
VIP
Warehouse
@soary Make sure you do not have 2 of the Fib studies on the chart. That will give you one line but 2 bubbles.
 
S

soary

Member
@soary Make sure you do not have 2 of the Fib studies on the chart. That will give you one line but 2 bubbles.
Thanks to make sure I placed it on a new chart by itself with only underlying volume indicator and saw that it doesn't do it with all tickers. Not with RUT or IWM but yes with QQQ, SPX and SPY. That is so weird. There's a ghost buble in my charts.
 
Y

yapaquse

New member
@soary I just found this nice auto fib and I see what you see. I will try to fix it over the weekend. Thinking also in changing the colors
 
L

lindosskier

New member
Great work on this one guys. Thank you. Could you help me with a couple of adjustments on it? 1)Adding the 11.3% and the 88.7% ratios in the mix as well and 2) How could I have it plot the auto fibonaccis from the previous Year, month, week and day, on the current Year, month, week and day charts. Thanks in advance for all your help!
 
F

flyer01

New member
How would the script need to be modified to show only the timeframe between midnight yesterday to the current time?
 
theelderwand

theelderwand

Member
VIP
Warehouse
A lot of folks are asking for modifications and colors. I felt the script was overall cumbersome and difficult to read.

The script now has the following changes:
  • Expands to right
  • Doesn't expand to left
  • Custom colors for Fibonacci bars (0.618 is GOLD color :) :) )
  • Custom line weights as well (let me know if you need them as inputs can add them)
  • Code is modularized so you can add extra plots as you need, just copy paste where you see 6 as 7.


Here you go:

Rich (BB code):
#hint Price: Price used in the alerts on crossing retracement lines. <b>(Default is Close)</b>

#hint coefficient_0: Retracement Line 0: Retracement from the highest high to the lowest low.<b>(Default is 0%)</b>
#hint Coefficient_1: Retracement Line 1: Retracement from the highest high to the lowest low.<b>(Default is 23.6%)</b>
#hint Coefficient_2: Retracement Line 2: Retracement from the highest high to the lowest low.<b>(Default is 38.2%)</b>
#hint Coefficient_3: Retracement Line 3: Retracement from the highest high to the lowest low.<b>(Default is 50%)</b>
#hint Coefficient_4: Retracement Line 4: Retracement from the highest high to the lowest low.<b>(Default is 61.8%)</b>
#hint Coefficient_5: Retracement Line 5: Retracement from the highest high to the lowest low.<b>(Default is 78.6%)</b>
#hint Coefficient_6: Retracement Line 6: Retracement from the highest high to the lowest low.<b>(Default is 100%)</b>

#wizard input: Price
#wizard text: Inputs: Price:
#wizard input: coefficient_0
#wizard text: coefficient_0:
#wizard input: Coefficient_1
#wizard text: Coefficient_1:
#wizard input: Coefficient_2
#wizard text: Coefficient_2:
#wizard input: Coefficient_3
#wizard text: Coefficient_3:
#wizard input: Coefficient_4
#wizard text: Coefficient_4:
#wizard input: Coefficient_5
#wizard text: Coefficient_5:
#wizard input: Coefficient_6
#wizard text: Coefficient_6:

input price = close;
input high = high;
input low = low;
input coefficient_0 = 0.000;
input coefficient_1 = .236;
input Coefficient_2 = .382;
input Coefficient_3 = .500;
input Coefficient_4 = .618;
Input Coefficient_5 = .786;
input Coefficient_6 = 1.000;

def a = HighestAll(high);
def b = LowestAll(low);
def barnumber = barNumber();
def c = if high == a then barnumber else double.nan;
def d = if low == b then barnumber else double.nan;
rec highnumber = compoundValue(1, if IsNaN(c) then highnumber[1] else c, c);
def highnumberall = HighestAll(highnumber);
rec lownumber = compoundValue(1, if IsNaN(d) then lownumber[1] else d, d);
def lownumberall = LowestAll(lownumber);

def upward = highnumberall > lownumberall;
def downward = highnumberall < lownumberall;

def x = AbsValue(lownumberall - highnumberall );

def slope = (a - b) / x;
def slopelow = (b - a) / x;

def day = getDay();
def month = getMonth();
def year = getYear();
def lastDay = getLastDay();
def lastmonth = getLastMonth();
def lastyear = getLastYear();
def isToday = if(day == lastDay and month == lastmonth and year == lastyear, 1, 0);
def istodaybarnumber = HighestAll(if isToday then barnumber else double.nan);
def line = b + (slope * (barnumber - lownumber));
def linelow = a + (slopelow * (barnumber - highnumber));
def currentlinelow = if barnumber <= lownumberall then linelow else double.nan;
def currentline = if barnumber <= highnumberall then line else double.nan;

Plot FibFan =  if  downward then currentlinelow else if upward then currentline else double.nan;
FibFan.SetStyle(Curve.SHORT_DASH);
FibFan.AssignValueColor(color.red);
fibfan.hidebubble();

def range =  a - b;

def value0 = range * coefficient_0;
def value1 = range * coefficient_1;
def value2 = range * coefficient_2;
def value3 = range * coefficient_3;
def value4 = range * coefficient_4;
def value5 = range * coefficient_5;
def value6 = range * coefficient_6;

def condition1 = downward and barnumber >= highnumberall;
def condition2 = upward and barnumber >= lownumberall;

Plot Retracement0 = if condition1 then highestall(b + value0) else if condition2 then highestall(a - value0) else double.nan;
Plot Retracement1 = if condition1 then highestall(b + value1) else if condition2 then highestall(a - value1) else double.nan;
Plot Retracement2 = if condition1 then highestall(b + value2) else if condition2 then highestall(a - value2) else double.nan;
Plot Retracement3 = if condition1 then highestall(b + value3) else if condition2 then highestall(a - value3) else double.nan;
Plot Retracement4 = if condition1 then highestall(b + value4) else if condition2 then highestall(a - value4) else double.nan;
Plot Retracement5 = if condition1 then highestall(b + value5) else if condition2 then highestall(a - value5) else double.nan;
Plot Retracement6 = if condition1 then highestall(b + value6) else if condition2 then highestall(a - value6) else double.nan;

Retracement0.assignvaluecolor(CreateColor(255,255,255));
Retracement0.setLineWeight(4);
retracement0.hidebubble();
#AddChartBubble((barnumber == istodaybarnumber +10), retracement0, concat( "$", round(retracement0, 2)), color.red, yes);
AddChartBubble((downward and barnumber == highnumberall), retracement0, concat( (coefficient_0 * 100), "%"), color.red, yes);
AddChartBubble((upward and barnumber == lownumberall), retracement0, concat( (coefficient_0 * 100), "%"), color.red, yes);

Retracement1.assignvaluecolor(CreateColor(173,216,230));
Retracement1.setLineWeight(2);
retracement1.hidebubble();
#AddChartBubble((barnumber == istodaybarnumber+10), retracement1, concat( "$", round(retracement1, 2)), color.red, yes);
AddChartBubble((downward and barnumber == highnumberall), retracement1, concat( (coefficient_1 * 100), "%"), color.red, yes);
AddChartBubble((upward and barnumber == lownumberall), retracement1, concat( (coefficient_1 * 100), "%"), color.red, yes);

Retracement2.assignvaluecolor(CreateColor(0,197,49));
Retracement2.setLineWeight(2);
retracement2.hidebubble();
#AddChartBubble((barnumber == istodaybarnumber+10), retracement2, concat( "$", round(retracement2, 2)), color.red, yes);
AddChartBubble((downward and barnumber == highnumberall), retracement2, concat( (coefficient_2 * 100), "%"), color.red, yes);
AddChartBubble((upward and barnumber == lownumberall), retracement2, concat( (coefficient_2 * 100), "%"), color.red, yes);

Retracement3.assignvaluecolor(CreateColor(255,64,64));
Retracement3.setLineWeight(3);
retracement3.hidebubble();
#AddChartBubble((barnumber == istodaybarnumber+10), retracement3, concat( "$", round(retracement3, 2)), color.red, yes);
AddChartBubble((downward and barnumber == highnumberall), retracement3, concat( (coefficient_3 * 100), "%"), color.red, yes);
AddChartBubble((upward and barnumber == lownumberall), retracement3, concat( (coefficient_3 * 100), "%"), color.red, yes);

Retracement4.assignvaluecolor(CreateColor(255,215,0));
Retracement4.setLineWeight(5);
retracement4.hidebubble();
#AddChartBubble((barnumber == istodaybarnumber+10), retracement4, concat( "$", round(retracement4, 2)), color.red, yes);
AddChartBubble((downward and barnumber == highnumberall), retracement4, concat( (coefficient_4 * 100), "%"), color.red, yes);
AddChartBubble((upward and barnumber == lownumberall), retracement4, concat( (coefficient_4 * 100), "%"), color.red, yes);

Retracement5.assignvaluecolor(CreateColor(0,255,255));
Retracement5.setLineWeight(2);
retracement5.hidebubble();
#AddChartBubble((barnumber == istodaybarnumber+10), retracement5, concat( "$", round(retracement5, 2)), color.red, yes);
AddChartBubble((downward and barnumber == highnumberall), retracement5, concat( (coefficient_5 * 100), "%"), color.red, yes);
AddChartBubble((upward and barnumber == lownumberall), retracement5, concat( (coefficient_5 * 100), "%"), color.red, yes);

Retracement6.assignvaluecolor(CreateColor(255,255,255));
Retracement6.setLineWeight(4);
Retracement6.hidebubble();
#AddChartBubble((barnumber == istodaybarnumber+10), retracement6, concat( "$", round(retracement6, 2)), color.red, yes);
AddChartBubble((downward and barnumber == highnumberall), retracement6, concat( (coefficient_6 * 100), "%"), color.red, yes);
AddChartBubble((upward and barnumber == lownumberall), retracement6, concat( (coefficient_6 * 100), "%"), color.red, yes);

alert((price crosses below Retracement0) , "Price crosses below Retracement Line 0");
alert((price crosses above Retracement0) , "Price crosses above Retracement Line 0");
alert((price crosses below Retracement1) , "Price crosses below Retracement Line 1");
alert((price crosses above Retracement1) , "Price crosses above Retracement Line 1");
alert((price crosses below Retracement2) , "Price crosses below Retracement Line 2");
alert((price crosses above Retracement2) , "Price crosses above Retracement Line 2");
alert((price crosses below Retracement3) , "Price crosses below Retracement Line 3");
alert((price crosses above Retracement3) , "Price crosses above Retracement Line 3");
alert((price crosses below Retracement4) , "Price crosses below Retracement Line 4");
alert((price crosses above Retracement4) , "Price crosses above Retracement Line 4");
alert((price crosses below Retracement5) , "Price crosses below Retracement Line 5");
alert((price crosses above Retracement5) , "Price crosses above Retracement Line 5");
alert((price crosses below Retracement6) , "Price crosses below Retracement Line 6");
alert((price crosses above Retracement6) , "Price crosses above Retracement Line 6");
 
Last edited by a moderator:
T

tomsk

Well-known member
VIP
Warehouse
Excellent modifications by @theelderwand on the auto fib study. I made one more enhancement to his version, by introducing an input selector for the colors of the label. You can select from any of the colors listed - red, orange, green, etc and bubbles for all the fib retracements will utilize that color.

Code:
#hint Price: Price used in the alerts on crossing retracement lines. <b>(Default is Close)</b>

#hint coefficient_0: Retracement Line 0: Retracement from the highest high to the lowest low.<b>(Default is 0%)</b>
#hint Coefficient_1: Retracement Line 1: Retracement from the highest high to the lowest low.<b>(Default is 23.6%)</b>
#hint Coefficient_2: Retracement Line 2: Retracement from the highest high to the lowest low.<b>(Default is 38.2%)</b>
#hint Coefficient_3: Retracement Line 3: Retracement from the highest high to the lowest low.<b>(Default is 50%)</b>
#hint Coefficient_4: Retracement Line 4: Retracement from the highest high to the lowest low.<b>(Default is 61.8%)</b>
#hint Coefficient_5: Retracement Line 5: Retracement from the highest high to the lowest low.<b>(Default is 78.6%)</b>
#hint Coefficient_6: Retracement Line 6: Retracement from the highest high to the lowest low.<b>(Default is 100%)</b>

#wizard input: Price
#wizard text: Inputs: Price:
#wizard input: coefficient_0
#wizard text: coefficient_0:
#wizard input: Coefficient_1
#wizard text: Coefficient_1:
#wizard input: Coefficient_2
#wizard text: Coefficient_2:
#wizard input: Coefficient_3
#wizard text: Coefficient_3:
#wizard input: Coefficient_4
#wizard text: Coefficient_4:
#wizard input: Coefficient_5
#wizard text: Coefficient_5:
#wizard input: Coefficient_6
#wizard text: Coefficient_6:

input price = close;
input high = high;
input low = low;
input coefficient_0 = 0.000;
input coefficient_1 = .236;
input Coefficient_2 = .382;
input Coefficient_3 = .500;
input Coefficient_4 = .618;
Input Coefficient_5 = .786;
input Coefficient_6 = 1.000;

input LabelColor = {default "MAGENTA", "CYAN", "PINK", "LIGHT_GRAY", "ORANGE", "RED", "GREEN", "GRAY", "WHITE"};

def a = HighestAll(high);
def b = LowestAll(low);
def barnumber = barNumber();
def c = if high == a then barnumber else double.nan;
def d = if low == b then barnumber else double.nan;
rec highnumber = compoundValue(1, if IsNaN(c) then highnumber[1] else c, c);
def highnumberall = HighestAll(highnumber);
rec lownumber = compoundValue(1, if IsNaN(d) then lownumber[1] else d, d);
def lownumberall = LowestAll(lownumber);

def upward = highnumberall > lownumberall;
def downward = highnumberall < lownumberall;

def x = AbsValue(lownumberall - highnumberall );

def slope = (a - b) / x;
def slopelow = (b - a) / x;

def day = getDay();
def month = getMonth();
def year = getYear();
def lastDay = getLastDay();
def lastmonth = getLastMonth();
def lastyear = getLastYear();
def isToday = if(day == lastDay and month == lastmonth and year == lastyear, 1, 0);
def istodaybarnumber = HighestAll(if isToday then barnumber else double.nan);
def line = b + (slope * (barnumber - lownumber));
def linelow = a + (slopelow * (barnumber - highnumber));
def currentlinelow = if barnumber <= lownumberall then linelow else double.nan;
def currentline = if barnumber <= highnumberall then line else double.nan;

Plot FibFan =  if  downward then currentlinelow else if upward then currentline else double.nan;
FibFan.SetStyle(Curve.SHORT_DASH);
FibFan.AssignValueColor(color.red);
fibfan.hidebubble();

def range =  a - b;

def value0 = range * coefficient_0;
def value1 = range * coefficient_1;
def value2 = range * coefficient_2;
def value3 = range * coefficient_3;
def value4 = range * coefficient_4;
def value5 = range * coefficient_5;
def value6 = range * coefficient_6;

def condition1 = downward and barnumber >= highnumberall;
def condition2 = upward and barnumber >= lownumberall;

Plot Retracement0 = if condition1 then highestall(b + value0) else if condition2 then highestall(a - value0) else double.nan;
Plot Retracement1 = if condition1 then highestall(b + value1) else if condition2 then highestall(a - value1) else double.nan;
Plot Retracement2 = if condition1 then highestall(b + value2) else if condition2 then highestall(a - value2) else double.nan;
Plot Retracement3 = if condition1 then highestall(b + value3) else if condition2 then highestall(a - value3) else double.nan;
Plot Retracement4 = if condition1 then highestall(b + value4) else if condition2 then highestall(a - value4) else double.nan;
Plot Retracement5 = if condition1 then highestall(b + value5) else if condition2 then highestall(a - value5) else double.nan;
Plot Retracement6 = if condition1 then highestall(b + value6) else if condition2 then highestall(a - value6) else double.nan;

Retracement0.assignvaluecolor(CreateColor(255,255,255));
Retracement0.setLineWeight(4);
retracement0.hidebubble();
#AddChartBubble((barnumber == istodaybarnumber +10), retracement0, concat( "$", round(retracement0, 2)), GetColor(LabelColor), yes);
AddChartBubble((downward and barnumber == highnumberall), retracement0, concat( (coefficient_0 * 100), "%"), GetColor(LabelColor), yes);
AddChartBubble((upward and barnumber == lownumberall), retracement0, concat( (coefficient_0 * 100), "%"), GetColor(LabelColor), yes);

Retracement1.assignvaluecolor(CreateColor(173,216,230));
Retracement1.setLineWeight(2);
retracement1.hidebubble();
#AddChartBubble((barnumber == istodaybarnumber+10), retracement1, concat( "$", round(retracement1, 2)), GetColor(LabelColor), yes);
AddChartBubble((downward and barnumber == highnumberall), retracement1, concat( (coefficient_1 * 100), "%"), GetColor(LabelColor), yes);
AddChartBubble((upward and barnumber == lownumberall), retracement1, concat( (coefficient_1 * 100), "%"), GetColor(LabelColor), yes);

Retracement2.assignvaluecolor(CreateColor(0,197,49));
Retracement2.setLineWeight(2);
retracement2.hidebubble();
#AddChartBubble((barnumber == istodaybarnumber+10), retracement2, concat( "$", round(retracement2, 2)), GetColor(LabelColor), yes);
AddChartBubble((downward and barnumber == highnumberall), retracement2, concat( (coefficient_2 * 100), "%"), GetColor(LabelColor), yes);
AddChartBubble((upward and barnumber == lownumberall), retracement2, concat( (coefficient_2 * 100), "%"), GetColor(LabelColor), yes);

Retracement3.assignvaluecolor(CreateColor(255,64,64));
Retracement3.setLineWeight(3);
retracement3.hidebubble();
#AddChartBubble((barnumber == istodaybarnumber+10), retracement3, concat( "$", round(retracement3, 2)), GetColor(LabelColor), yes);
AddChartBubble((downward and barnumber == highnumberall), retracement3, concat( (coefficient_3 * 100), "%"), GetColor(LabelColor), yes);
AddChartBubble((upward and barnumber == lownumberall), retracement3, concat( (coefficient_3 * 100), "%"), GetColor(LabelColor), yes);

Retracement4.assignvaluecolor(CreateColor(255,215,0));
Retracement4.setLineWeight(5);
retracement4.hidebubble();
#AddChartBubble((barnumber == istodaybarnumber+10), retracement4, concat( "$", round(retracement4, 2)), GetColor(LabelColor), yes);
AddChartBubble((downward and barnumber == highnumberall), retracement4, concat( (coefficient_4 * 100), "%"), GetColor(LabelColor), yes);
AddChartBubble((upward and barnumber == lownumberall), retracement4, concat( (coefficient_4 * 100), "%"), GetColor(LabelColor), yes);

Retracement5.assignvaluecolor(CreateColor(0,255,255));
Retracement5.setLineWeight(2);
retracement5.hidebubble();
#AddChartBubble((barnumber == istodaybarnumber+10), retracement5, concat( "$", round(retracement5, 2)), GetColor(LabelColor), yes);
AddChartBubble((downward and barnumber == highnumberall), retracement5, concat( (coefficient_5 * 100), "%"), GetColor(LabelColor), yes);
AddChartBubble((upward and barnumber == lownumberall), retracement5, concat( (coefficient_5 * 100), "%"), GetColor(LabelColor), yes);

Retracement6.assignvaluecolor(CreateColor(255,255,255));
Retracement6.setLineWeight(4);
Retracement6.hidebubble();
#AddChartBubble((barnumber == istodaybarnumber+10), retracement6, concat( "$", round(retracement6, 2)), GetColor(LabelColor), yes);
AddChartBubble((downward and barnumber == highnumberall), retracement6, concat( (coefficient_6 * 100), "%"), GetColor(LabelColor), yes);
AddChartBubble((upward and barnumber == lownumberall), retracement6, concat( (coefficient_6 * 100), "%"), GetColor(LabelColor), yes);

alert((price crosses below Retracement0) , "Price crosses below Retracement Line 0");
alert((price crosses above Retracement0) , "Price crosses above Retracement Line 0");
alert((price crosses below Retracement1) , "Price crosses below Retracement Line 1");
alert((price crosses above Retracement1) , "Price crosses above Retracement Line 1");
alert((price crosses below Retracement2) , "Price crosses below Retracement Line 2");
alert((price crosses above Retracement2) , "Price crosses above Retracement Line 2");
alert((price crosses below Retracement3) , "Price crosses below Retracement Line 3");
alert((price crosses above Retracement3) , "Price crosses above Retracement Line 3");
alert((price crosses below Retracement4) , "Price crosses below Retracement Line 4");
alert((price crosses above Retracement4) , "Price crosses above Retracement Line 4");
alert((price crosses below Retracement5) , "Price crosses below Retracement Line 5");
alert((price crosses above Retracement5) , "Price crosses above Retracement Line 5");
alert((price crosses below Retracement6) , "Price crosses below Retracement Line 6");
alert((price crosses above Retracement6) , "Price crosses above Retracement Line 6");
# END CODE
 
F

flyer01

New member
Are there any options to define a lookback timeframe in this script. For example, when trading /ES intraday, it would be very helpful to draw the fibs from the lowest/highest points between 12:00AM the previous day and the current bar.

I can't thank you guys enough for the information on this forum!
 
F

FunTrade

New member
VIP
Warehouse
I always wonder how helpful is fib in an uptrend :) Say, for example, If you see ES_F, It is still running when we have 100% on the fib levels?? Don't you think what we are seeing is absolutely wrong? All the Autofib scripts are gonna take the high low and plot fibs for you, But it never takes Extensions into consideration :) Say 123.6% from the fib level I plotted, etc ... Do you people agree?
 
F

flyer01

New member
In a strong uptrend there are still a few point pullbacks. The first intraday (two day) fib level is usually makes for a good entry if you are not already in.
 
T

tomsk

Well-known member
VIP
Warehouse
Folks here is version 1.3 of the Auto Fib study that now displays the bubbles on the right of the chart.
Please ensure that you increase the expansion area to that the bubbles have room to be displayed
Personally I set that to 22 on my chart settings

Chart Settings > Time Axis > Expansion Area

Given several changes to this code from the first time it was posted by @BenTen in 2018, I have created a change log
It details the various modifications to the base code that was made including a really nice cleaned up version from @theelderwand

Hope this helps

Code:
# Auto Fib V1.3
# tomsk
# 11.19.2019

# Automatically draws fibonacci retracements using the highest price and lowest price 
# from the current view and timeframe.
#
# Fibonacci retracements use horizontal lines to indicate areas of support or resistance 
# at the key Fibonacci levels before it continues in the original direction. These levels 
# are created by drawing a trendline between two extreme points and then dividing the 
# vertical distance by the key Fibonacci ratios of: 23.6%, 38.2%, 50%, 61.8%, 78.6%, and 100%.

# CHANGE LOG
#
# V1.0 - 12.18.2018 - BenTen       - Initial release of Auto Fib, created by Ryan Hendricks
# V1.1 - 11.15.2019 - theelderwand - As script was difficult to read, made the following enhancements
#                                    Expands to right
#                                    Doesn't expand to left
#                                    Custom colors for Fibonacci bars (0.618 is GOLD color)
#                                    Custom line weights
#                                    Code is modularized so you can add extra plots as needed
# V1.2 - 11.15.2019 - tomsk        - Added an input selector for the colors of the label. You 
#                                    can select from any of the colors listed - red, orange, 
#                                    green, etc and bubbles for all the fib retracements will 
#                                    utilize that color.
# V1.3 - 11.19.2019 - tomsk        - Modified the AddChartBubbles to be displayed on the right
#                                    side of the chart. Please ensure that you increase the
#                                    expansion area to that the bubbles have room to be displayed
#                                    Chart Settings > Time Axis > Expansion Area

#hint Price: Price used in the alerts on crossing retracement lines. <b>(Default is Close)</b>

#hint coefficient_0: Retracement Line 0: Retracement from the highest high to the lowest low.<b>(Default is 0%)</b>
#hint Coefficient_1: Retracement Line 1: Retracement from the highest high to the lowest low.<b>(Default is 23.6%)</b>
#hint Coefficient_2: Retracement Line 2: Retracement from the highest high to the lowest low.<b>(Default is 38.2%)</b>
#hint Coefficient_3: Retracement Line 3: Retracement from the highest high to the lowest low.<b>(Default is 50%)</b>
#hint Coefficient_4: Retracement Line 4: Retracement from the highest high to the lowest low.<b>(Default is 61.8%)</b>
#hint Coefficient_5: Retracement Line 5: Retracement from the highest high to the lowest low.<b>(Default is 78.6%)</b>
#hint Coefficient_6: Retracement Line 6: Retracement from the highest high to the lowest low.<b>(Default is 100%)</b>

#wizard input: Price
#wizard text: Inputs: Price:
#wizard input: coefficient_0
#wizard text: coefficient_0:
#wizard input: Coefficient_1
#wizard text: Coefficient_1:
#wizard input: Coefficient_2
#wizard text: Coefficient_2:
#wizard input: Coefficient_3
#wizard text: Coefficient_3:
#wizard input: Coefficient_4
#wizard text: Coefficient_4:
#wizard input: Coefficient_5
#wizard text: Coefficient_5:
#wizard input: Coefficient_6
#wizard text: Coefficient_6:

input price = close;
input high = high;
input low = low;
input coefficient_0 = 0.000;
input coefficient_1 = .236;
input Coefficient_2 = .382;
input Coefficient_3 = .500;
input Coefficient_4 = .618;
Input Coefficient_5 = .786;
input Coefficient_6 = 1.000;

input LabelColor = {default "MAGENTA", "CYAN", "PINK", "LIGHT_GRAY", "ORANGE", "RED", "GREEN", "GRAY", "WHITE"};
input n = 3;

def n1  = n + 1;
def a = HighestAll(high);
def b = LowestAll(low);
def barnumber = barNumber();
def c = if high == a then barnumber else double.nan;
def d = if low == b then barnumber else double.nan;
rec highnumber = compoundValue(1, if IsNaN(c) then highnumber[1] else c, c);
def highnumberall = HighestAll(highnumber);
rec lownumber = compoundValue(1, if IsNaN(d) then lownumber[1] else d, d);
def lownumberall = LowestAll(lownumber);

def upward = highnumberall > lownumberall;
def downward = highnumberall < lownumberall;

def x = AbsValue(lownumberall - highnumberall );

def slope = (a - b) / x;
def slopelow = (b - a) / x;

def day = getDay();
def month = getMonth();
def year = getYear();
def lastDay = getLastDay();
def lastmonth = getLastMonth();
def lastyear = getLastYear();
def isToday = if(day == lastDay and month == lastmonth and year == lastyear, 1, 0);
def istodaybarnumber = HighestAll(if isToday then barnumber else double.nan);
def line = b + (slope * (barnumber - lownumber));
def linelow = a + (slopelow * (barnumber - highnumber));
def currentlinelow = if barnumber <= lownumberall then linelow else double.nan;
def currentline = if barnumber <= highnumberall then line else double.nan;

Plot FibFan =  if  downward then currentlinelow else if upward then currentline else double.nan;
FibFan.SetStyle(Curve.SHORT_DASH);
FibFan.AssignValueColor(color.red);
fibfan.hidebubble();

def range =  a - b;

def value0 = range * coefficient_0;
def value1 = range * coefficient_1;
def value2 = range * coefficient_2;
def value3 = range * coefficient_3;
def value4 = range * coefficient_4;
def value5 = range * coefficient_5;
def value6 = range * coefficient_6;

def condition1 = downward and barnumber >= highnumberall;
def condition2 = upward and barnumber >= lownumberall;

Plot Retracement0 = if condition1 then highestall(b + value0) else if condition2 then highestall(a - value0) else double.nan;
Plot Retracement1 = if condition1 then highestall(b + value1) else if condition2 then highestall(a - value1) else double.nan;
Plot Retracement2 = if condition1 then highestall(b + value2) else if condition2 then highestall(a - value2) else double.nan;
Plot Retracement3 = if condition1 then highestall(b + value3) else if condition2 then highestall(a - value3) else double.nan;
Plot Retracement4 = if condition1 then highestall(b + value4) else if condition2 then highestall(a - value4) else double.nan;
Plot Retracement5 = if condition1 then highestall(b + value5) else if condition2 then highestall(a - value5) else double.nan;
Plot Retracement6 = if condition1 then highestall(b + value6) else if condition2 then highestall(a - value6) else double.nan;

Retracement0.assignvaluecolor(CreateColor(255,255,255));
Retracement0.setLineWeight(4);
retracement0.hidebubble();
AddChartBubble((downward and close[n1]) and IsNaN(close[n]), retracement0, concat( (coefficient_0 * 100), "%"), GetColor(LabelColor), yes);
AddChartBubble((upward and close[n1]) and IsNaN(close[n]), retracement0, concat( (coefficient_0 * 100), "%"), GetColor(LabelColor), yes);

Retracement1.assignvaluecolor(CreateColor(173,216,230));
Retracement1.setLineWeight(2);
retracement1.hidebubble();
AddChartBubble((downward and close[n1]) and IsNaN(close[n]), retracement1, concat( (coefficient_1 * 100), "%"), GetColor(LabelColor), yes);
AddChartBubble((upward and close[n1]) and IsNaN(close[n]), retracement1, concat( (coefficient_1 * 100), "%"), GetColor(LabelColor), yes);

Retracement2.assignvaluecolor(CreateColor(0,197,49));
Retracement2.setLineWeight(2);
retracement2.hidebubble();
AddChartBubble((downward and close[n1]) and IsNaN(close[n]), retracement2, concat( (coefficient_2 * 100), "%"), GetColor(LabelColor), yes);
AddChartBubble((upward and close[n1]) and IsNaN(close[n]), retracement2, concat( (coefficient_2 * 100), "%"), GetColor(LabelColor), yes);

Retracement3.assignvaluecolor(CreateColor(255,64,64));
Retracement3.setLineWeight(3);
retracement3.hidebubble();
AddChartBubble((downward and close[n1]) and IsNaN(close[n]), retracement3, concat( (coefficient_3 * 100), "%"), GetColor(LabelColor), yes);
AddChartBubble((upward and close[n1]) and IsNaN(close[n]), retracement3, concat( (coefficient_3 * 100), "%"), GetColor(LabelColor), yes);

Retracement4.assignvaluecolor(CreateColor(255,215,0));
Retracement4.setLineWeight(5);
retracement4.hidebubble();
AddChartBubble((downward and close[n1]) and IsNaN(close[n]), retracement4, concat( (coefficient_4 * 100), "%"), GetColor(LabelColor), yes);
AddChartBubble((upward and close[n1]) and IsNaN(close[n]), retracement4, concat( (coefficient_4 * 100), "%"), GetColor(LabelColor), yes);

Retracement5.assignvaluecolor(CreateColor(0,255,255));
Retracement5.setLineWeight(2);
retracement5.hidebubble();
AddChartBubble((downward and close[n1]) and IsNaN(close[n]), retracement5, concat( (coefficient_5 * 100), "%"), GetColor(LabelColor), yes);
AddChartBubble((upward and close[n1]) and IsNaN(close[n]), retracement5, concat( (coefficient_5 * 100), "%"), GetColor(LabelColor), yes);

Retracement6.assignvaluecolor(CreateColor(255,255,255));
Retracement6.setLineWeight(4);
Retracement6.hidebubble();
AddChartBubble((downward and close[n1]) and IsNaN(close[n]), retracement6, concat( (coefficient_6 * 100), "%"), GetColor(LabelColor), yes);
AddChartBubble((upward and close[n1]) and IsNaN(close[n]), retracement6, concat( (coefficient_6 * 100), "%"), GetColor(LabelColor), yes);

alert((price crosses below Retracement0) , "Price crosses below Retracement Line 0");
alert((price crosses above Retracement0) , "Price crosses above Retracement Line 0");
alert((price crosses below Retracement1) , "Price crosses below Retracement Line 1");
alert((price crosses above Retracement1) , "Price crosses above Retracement Line 1");
alert((price crosses below Retracement2) , "Price crosses below Retracement Line 2");
alert((price crosses above Retracement2) , "Price crosses above Retracement Line 2");
alert((price crosses below Retracement3) , "Price crosses below Retracement Line 3");
alert((price crosses above Retracement3) , "Price crosses above Retracement Line 3");
alert((price crosses below Retracement4) , "Price crosses below Retracement Line 4");
alert((price crosses above Retracement4) , "Price crosses above Retracement Line 4");
alert((price crosses below Retracement5) , "Price crosses below Retracement Line 5");
alert((price crosses above Retracement5) , "Price crosses above Retracement Line 5");
alert((price crosses below Retracement6) , "Price crosses below Retracement Line 6");
alert((price crosses above Retracement6) , "Price crosses above Retracement Line 6");
# End Auto Fib v1.3
 
R

RoyalBlue

New member
@soary Please share a screenshot of your chart. If you don't know how to post a screenshot, see this post.
hey ben,
is it possible to change those fib levels?.
to 0%, 38.2%, 78.6%, 125%, 161.2%,and 243%?
 
T

tomsk

Well-known member
VIP
Warehouse
hey ben,
is it possible to change those fib levels?.
to 0%, 38.2%, 78.6%, 125%, 161.2%,and 243%?
I'll respond on behalf of @BenTen
This is a fibonacci retracement study so displays levels at 0%, 38.2% all the way up to 100%
It is not designed to be a fibonacci extension study, which is what you will require for percentages larger than 100%
Note that 125% and 243% as you've listed are not fibonacci extensions
 

Top