RSI in Laguerre Time Self Adjusting With Fractal Energy Usage Notes

The above code appears to be some modifications to the original study, it definitely is not from Mobius, the original author or the code. That said, looking within the code, the "C" and "E" you enquired about mark "Consolidation" and "Exhaustion" as indicated by the following two lines within the code

Code:
AddChartBubble(FE_Consolidation, gamma,  "C", COLOR.WHITE);
AddChartBubble(FE_Exhaustion, gamma,  "E", COLOR.WHITE);


Regarding the "dotted" line, that appears to be a plot of gamma which is one of the internal variables. Read @markos post # 19.
From what I can see this is certainly not one of the mainstream versions of the study. That's about all I can glean from a quick overview of the code
 
Thank you, @tomsk!! I learned a lot from this first post on the forum. (y)
Today was actually a great day to test drive the indicator....it's been interesting!
 
Last edited:
@HighBredCloud this code is very useful!! thank you very much. is it possible to make scanner of it
I believe there is already a scanner for it...I don't have it as I do not use this particular indicator...It just hasn't clicked with me and IMO there are better indicators out there that hit faster but others swear by it. Use the search option and type Laguerre Time RSI scan or scanner...You should find what you're looking for...Might have to do a bit of digging but I know I've seen it before on here when I was searching for various scans.
 
I believe there is already a scanner for it...I don't have it as I do not use this particular indicator...It just hasn't clicked with me and IMO there are better indicators out there that hit faster but others swear by it. Use the search option and type Laguerre Time RSI scan or scanner...You should find what you're looking for...Might have to do a bit of digging but I know I've seen it before on here when I was searching for various scans.
thank you very much!!
 
I can routinely use the lagauerre on short times frames as well there is an MTF version not sure if I posted that one. I use this on 2-5min and up
 
single version MTF so many version from rsi fe, rsi time, ect… I beleive what Ive posted are Mobious Laguerre studies. The grids I posted will contain the upper studies as well. Ive not added much to the original Mobious studs except for mobious trader fractal pivots
https://tos.mx/6wmAXcSand another version Heiken Ashi MTF
https://tos.mx/Dew2GDi
 
Last edited:
@markos Hi Guys,

I have tried to get this scan to work numerous times but continue to get the error "No such function: RSILg_FE_Gssn1 at 1:1" when I tried to change the Aggregation Period from 15 minutes to anything else. It works for 15 minute data, but just will allow no changes. What am I doing wrong? @markos? Thanks a million for any help!
 
Last edited:
@markos Hi Guys,

I have tried to get this scan to work numerous times but continue to get the error "No such function: RSILg_FE_Gssn1 at 1:1" when I tried to change the Aggregation Period from 15 minutes to anything else. It works for 15 minute data, but just will allow no changes. What am I doing wrong? @markos? Thanks a million for any help!
@Hotdog123 Hi and welcome to the useThinkScript community. Are you using the scan that is listed in the first page? Please post the code you are using. Also post a picture, use Imgur.com and select BB Code. What agg did you change to in the scan? The code and a screen shot of your scan set up will help us assist you.
 
Last edited:
@Hotdog123 Hi and welcome to the useThinkScript community. Are you using the scan that is listed in the first page? Please post the code you are using. Also post a picture, use Imgur.com and select BB Code. What agg did you change to in the scan? The code and a screen shot of your scan set up will help us assist you.

Thanks a bunch for the reply, @markos. I am using the script from Page 1 - importing the link given there ( Scan Code: https://tos.mx/bRLjdq). I was tying to make a change to the pop up screen showing the live scan, which would not allow any input and gave the error. I WAS able to build a scan manually starting from scratch and can change the AGG Period. I was also able to create gadget scans manually and set whatever AGG Period I wanted. So, I am up and running. Don't know why the other way doesn't work, but honestly too busy to worry with it now that things are working OK.

One other question: what would you consider to be the best source for info on using these scans/indicators?

Thanks again for responding so quickly and for all the great info you have posted.
 
All- I would really appreciate your opinion on the best way to set up a scan for the LaguerreRSI. I am using a daily chart for anchor and a 30 minute for trade signals. Generating buy signals long only, with daily trend.

My question is on the preferred level of gamma in each of the time frames for filtering for best probability of a successful signal. Should I require gamma to be greater than 0.60 for both time frames? Or, just just one? What is the best approach here, in your opinion?
 
@Hotdog123 Sorry it took so long to get back. The versions used here are based on code written by Mobius. I believe that this thread is where the notes that were captured on how to use the scan and chart. If not this one, there are other threads here that may contain usage notes. Yes, please re-read post #1 & 2 as that's where the notes are.

There is no best way to set up a scan. I have 6 or 8 that I have used over time but they each had specific things that they did. They are proprietary to Theotrade, so I cannot share them. Point being that I don't use them anymore. You are best off using the stocks or Etf's that are most liquid and watch those.

Regarding Gamma: it is only a signal for when not to trade, it is not in and of itself a trading signal, though many use it that way. Gamma that is high means that the product is wound up ready to make a move, up or down. Gamma that is low has signs of an exhausted move. That is really all there is to Gamma with the RSI Laguerre. Your signal will be when the RSI line breaks above 20 with Gamma coming down to go long. Watch it and play with it. It is nuanced and takes time to pick up. It's all about probabilities. If Gamma is high in both Timing chart & signal chart, your break above 20 should be more assured on your 30 minute chart. Hope that helps.
 
Last edited:

Join useThinkScript to post your question to a community of 21,000+ developers and traders.

Thread starter Similar threads Forum Replies Date
markos TMO or RSI in Laguerre Time with FE - Q&A Tutorials 31

Similar threads

Not the exact question you're looking for?

Start a new thread and receive assistance from our community.

87k+ Posts
535 Online
Create Post

Similar threads

Similar threads

The Market Trading Game Changer

Join 2,500+ subscribers inside the useThinkScript VIP Membership Club
  • Exclusive indicators
  • Proven strategies & setups
  • Private Discord community
  • ‘Buy The Dip’ signal alerts
  • Exclusive members-only content
  • Add-ons and resources
  • 1 full year of unlimited support

Frequently Asked Questions

What is useThinkScript?

useThinkScript is the #1 community of stock market investors using indicators and other tools to power their trading strategies. Traders of all skill levels use our forums to learn about scripting and indicators, help each other, and discover new ways to gain an edge in the markets.

How do I get started?

We get it. Our forum can be intimidating, if not overwhelming. With thousands of topics, tens of thousands of posts, our community has created an incredibly deep knowledge base for stock traders. No one can ever exhaust every resource provided on our site.

If you are new, or just looking for guidance, here are some helpful links to get you started.

What are the benefits of VIP Membership?
VIP members get exclusive access to these proven and tested premium indicators: Buy the Dip, Advanced Market Moves 2.0, Take Profit, and Volatility Trading Range. In addition, VIP members get access to over 50 VIP-only custom indicators, add-ons, and strategies, private VIP-only forums, private Discord channel to discuss trades and strategies in real-time, customer support, trade alerts, and much more. Learn all about VIP membership here.
How can I access the premium indicators?
To access the premium indicators, which are plug and play ready, sign up for VIP membership here.
Back
Top