Auto Fib (Fibonacci) Levels Indicator for ThinkorSwim

SleepyZ said:
@zeek per your request, I modified the time range method so that timerange_begin/timerange_end inputs would allow for post close of prior day, current day premarket, and custom user time ranges, with the Fibonacci lines drawn across the entire chart.

Code: 
#FibChoices v1
#Request usethinkscript.com @theelderwand to duplicate a swimdicators video's chart's indicator
#BLT 20191224

#v1 20191228 per request @zeek, changed time range method so that timerange_begin/timerange_end inputs would allow for post close of prior day, current day premarket, and custom user time ranges, with the Fibonacci lines drawn across the entire chart.


input method = {default aggregation, developing_reg_thrs, developing_ext_thrs, time_range};

input aggregation              = AggregationPeriod.DAY;
input aggregation_periodsback  = 0;

input timerange_begin  = 0000;
input timerange_end    = 0929;
# Examples: pre-market setting: 0000,0929; previous close through pre-market: 1600,0929;
# intraday opening range: 0930,1030

input display_upper_extended_fibs = no;
input display_lower_extended_fibs = no;

input fib1 = .236;
input fib2 = .382;
input fib3 = .500;
input fib4 = .618;
input fib5 = .764;

input showchart_bubbles = yes;
input bubble_option     = {default fiblevel, pricelevel};
input bubblemover       = 1; #used to move the bubble left and right

def bn = BarNumber();
#Time Range - Determines High/Low Where TimeRange_Begin Times are Between 1600 and 2359 Following the Prior Day's Close
def globexOpen   = if (if GetDayOfWeek(GetYYYYMMDD()) == 1 then SecondsFromTime(timerange_begin) >= 0 else SecondsFromTime(timerange_begin) >= 0) or SecondsFromTime(timerange_end) < 0 then 1 else 0;
def globexReset  = if globexOpen and !globexOpen[1] then 1 else 0;
def globexHigh   = CompoundValue(1, If((high > globexHigh[1] and globexOpen) or globexReset, high, globexHigh[1]), high);
def globexLow    = CompoundValue(1, If((low < globexLow[1] and globexOpen) or globexReset, low, globexLow[1]), low);
def globexhighbn = if high == (globexHigh) then bn else globexhighbn[1];
def globexlowbn  = if low == (globexLow) then bn else globexlowbn[1];

#Time Range - Determines High/Low with TimeRange_Begin Times From 0000 for PreMarket, Current Day or Intraday Pereiods
def day     = GetDay() == GetLastDay();
def lastday = if day and SecondsFromTime(timerange_begin) >= 0 then bn else Double.NaN;
def hhamt   = if day and bn == LowestAll(lastday) then high else if SecondsFromTime(timerange_end) <= 0 then Max(high, hhamt[1]) else hhamt[1];
def hhbn    = if high == (hhamt) then bn else hhbn[1];
def llamt   = if day and bn == LowestAll(lastday)  then low else if SecondsFromTime(timerange_end) <= 0 then Min(low, llamt[1]) else llamt[1];
def llbn    = if low == (llamt) then bn else llbn[1];

#Fibonacci High/Lows Determined based upon input method selected
def hh;
def ll;

switch (method){
#
case aggregation:
    hh = high(period = aggregation)[aggregation_periodsback];
    ll = low(period = aggregation)[aggregation_periodsback];
#
case developing_reg_thrs:
    hh = if GetTime() crosses above RegularTradingStart(GetYYYYMMDD()) then high else if GetTime() > RegularTradingStart(GetYYYYMMDD()) and high > hh[1] then high else hh[1];
    ll = if GetTime() crosses above RegularTradingStart(GetYYYYMMDD()) then low else if GetTime() > RegularTradingStart(GetYYYYMMDD()) and low < ll[1] then low else ll[1];
#
case developing_ext_thrs:
    hh = if GetTime() crosses above RegularTradingEnd(GetYYYYMMDD()) then high else if high > hh[1] then high else hh[1];
    ll = if GetTime() crosses above RegularTradingEnd(GetYYYYMMDD()) then low else if low < ll[1] then low else ll[1];
#
case time_range:
#Lines will display across the entire chart
    hh = if Between(timerange_begin, 1600, 2359) then HighestAll(if BarNumber() == HighestAll(globexhighbn) then globexHigh else Double.NaN) else HighestAll(if bn == HighestAll(hhbn) then (hhamt) else Double.NaN);
    ll = if Between(timerange_begin, 1600, 2359) then LowestAll(if BarNumber() == HighestAll(globexlowbn) then globexLow else Double.NaN) else LowestAll(if bn == HighestAll(llbn) then llamt else Double.NaN);

}

#Fibonacci Line Plots
def range  = hh - ll;
def f1   = ll + range * fib1;
def f2   = ll + range * fib2;
def f3   = ll + range * fib3;
def f4   = ll + range * fib4;
def f5   = ll + range * fib5;
def hh1  = hh;
def ll1  = ll;
def ff1  = f1;
def ff2  = f2;
def ff3  = f3;
def ff4  = f4;
def ff5  = f5;

input fib_line_choice = {default horizontal, points, dashes};
def paintingStrategy = if fib_line_choice == fib_line_choice.horizontal then PaintingStrategy.HORIZONTAL else if fib_line_choice == fib_line_choice.points then PaintingStrategy.POINTS else PaintingStrategy.DASHES;

plot hhp = hh1;
hhp.SetPaintingStrategy(paintingStrategy);
hhp.SetDefaultColor(Color.GREEN);
hhp.SetLineWeight(1);

plot llp =  ll1;
llp.SetPaintingStrategy(paintingStrategy);
llp.SetDefaultColor(Color.RED);
llp.SetLineWeight(1);

plot f1p =  ff1;
f1p.SetPaintingStrategy(paintingStrategy);
f1p.SetDefaultColor(Color.YELLOW);
f1p.SetLineWeight(1);

plot f2p =  ff2;
f2p.SetPaintingStrategy(paintingStrategy);
f2p.SetDefaultColor(Color.YELLOW);
f2p.SetLineWeight(1);

plot f3p =  ff3;
f3p.SetPaintingStrategy(paintingStrategy);
f3p.SetDefaultColor(Color.WHITE);
f3p.SetLineWeight(1);

plot f4p = ff4;
f4p.SetPaintingStrategy(paintingStrategy);
f4p.SetDefaultColor(Color.YELLOW);
f4p.SetLineWeight(1);

plot f5p =  ff5;
f5p.SetPaintingStrategy(paintingStrategy);
f5p.SetDefaultColor(Color.YELLOW);
f5p.SetLineWeight(1);

#Fibonacci - Upper Extended Fib Lines
plot uhhp = if display_upper_extended_fibs == no then Double.NaN else range + hh1;
uhhp.SetPaintingStrategy(paintingStrategy);
uhhp.SetDefaultColor(Color.GREEN);
uhhp.SetLineWeight(1);

plot uf1p = if  display_upper_extended_fibs == no then Double.NaN else range + ff1;
uf1p.SetPaintingStrategy(paintingStrategy);
uf1p.SetDefaultColor(Color.YELLOW);
uf1p.SetLineWeight(1);

plot uf2p = if  display_upper_extended_fibs == no then Double.NaN else range + ff2;
uf2p.SetPaintingStrategy(paintingStrategy);
uf2p.SetDefaultColor(Color.YELLOW);
uf2p.SetLineWeight(1);

plot uf3p = if  display_upper_extended_fibs == no then Double.NaN else range + ff3;
uf3p.SetPaintingStrategy(paintingStrategy);
uf3p.SetDefaultColor(Color.WHITE);
uf3p.SetLineWeight(1);

plot uf4p = if  display_upper_extended_fibs == no then Double.NaN else range + ff4;
uf4p.SetPaintingStrategy(paintingStrategy);
uf4p.SetDefaultColor(Color.YELLOW);
uf4p.SetLineWeight(1);

plot uf5p = if  display_upper_extended_fibs == no then Double.NaN else range + ff5;
uf5p.SetPaintingStrategy(paintingStrategy);
uf5p.SetDefaultColor(Color.YELLOW);
uf5p.SetLineWeight(1);

#Fibonacci - Lower Extended Fib Lines
plot Lllp = if  display_lower_extended_fibs == no then Double.NaN else ll - range;
Lllp.SetPaintingStrategy(paintingStrategy);
Lllp.SetDefaultColor(Color.RED);
Lllp.SetLineWeight(1);

plot Lf1p = if  display_lower_extended_fibs == no then Double.NaN else ll - range * fib1;
Lf1p.SetPaintingStrategy(paintingStrategy);
Lf1p.SetDefaultColor(Color.YELLOW);
Lf1p.SetLineWeight(1);

plot Lf2p = if display_lower_extended_fibs == no then Double.NaN else ll - range * fib2;
Lf2p.SetPaintingStrategy(paintingStrategy);
Lf2p.SetDefaultColor(Color.YELLOW);
Lf2p.SetLineWeight(1);

plot Lf3p = if display_lower_extended_fibs == no then Double.NaN else ll - range * fib3;
Lf3p.SetPaintingStrategy(paintingStrategy);
Lf3p.SetDefaultColor(Color.WHITE);
Lf3p.SetLineWeight(1);

plot Lf4p = if  display_lower_extended_fibs == no then Double.NaN else ll - range * fib4;
Lf4p.SetPaintingStrategy(paintingStrategy);
Lf4p.SetDefaultColor(Color.YELLOW);
Lf4p.SetLineWeight(1);

plot Lf5p = if display_lower_extended_fibs == no then Double.NaN else ll - range * fib5;
Lf5p.SetPaintingStrategy(paintingStrategy);
Lf5p.SetDefaultColor(Color.YELLOW);
Lf5p.SetLineWeight(1);

#Bubbles Displaying Fib Levels in Right Expansion
def n   = bubblemover;
def n1  = n + 1;
AddChartBubble(showchart_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), hhp[n1], 1, Color.GRAY, yes);
AddChartBubble(showchart_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), ff1[n1], fib1, Color.GRAY, yes);
AddChartBubble(showchart_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), ff2[n1], fib2, Color.GRAY, yes);
AddChartBubble(showchart_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), ff3[n1], fib3, Color.GRAY, yes);
AddChartBubble(showchart_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), ff4[n1], fib4, Color.GRAY, yes);
AddChartBubble(showchart_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), ff5[n1], fib5, Color.GRAY, yes);
AddChartBubble(showchart_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), llp[n1], 0, Color.GRAY, yes);
AddChartBubble(showchart_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), uf1p[n1], 1 + fib1, Color.GRAY, yes);
AddChartBubble(showchart_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), uf2p[n1], 1 + fib2, Color.GRAY, yes);
AddChartBubble(showchart_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), uf3p[n1], 1 + fib3, Color.GRAY, yes);
AddChartBubble(showchart_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), uf4p[n1], 1 + fib4, Color.GRAY, yes);
AddChartBubble(showchart_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), uf5p[n1], 1 + fib5, Color.GRAY, yes);
AddChartBubble(showchart_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), Lf1p[n1], -fib1, Color.GRAY, yes);
AddChartBubble(showchart_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), Lf2p[n1], -fib2, Color.GRAY, yes);
AddChartBubble(showchart_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), Lf3p[n1], -fib3 , Color.GRAY, yes);
AddChartBubble(showchart_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), Lf4p[n1], -fib4, Color.GRAY, yes);
AddChartBubble(showchart_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), Lf5p[n1], -fib5, Color.GRAY, yes);
AddChartBubble(showchart_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), uhhp[n1], 2, Color.GRAY, yes);
AddChartBubble(showchart_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), Lllp[n1], -1, Color.GRAY, yes);

#Hiding Fib Line Price Levels Usually Displayed on Right Price Axis
hhp.HideBubble();
llp.HideBubble();
uhhp.HideBubble();
Lllp.HideBubble();
f1p.HideBubble();
f2p.HideBubble();
f3p.HideBubble();
f4p.HideBubble();
f5p.HideBubble();
Lf1p.HideBubble();
Lf2p.HideBubble();
Lf3p.HideBubble();
Lf4p.HideBubble();
Lf5p.HideBubble();
uf1p.HideBubble();
uf2p.HideBubble();
uf3p.HideBubble();
uf4p.HideBubble();
uf5p.HideBubble();
Click to expand...
@SleepyZ What do I set the settings to so I can have prior days range (regular trading hrs from open to close) fibs drawn on current day chart? I have tried all the indicators on here (there are many for fibs) and no matter which one or how I set it up, I can't get what I want. Will this one work? I just want to plot the prior day fibs on the current day chart.
 
bkbrown said:
@SleepyZ What do I set the settings to so I can have prior days range (regular trading hrs from open to close) fibs drawn on current day chart? I have tried all the indicators on here (there are many for fibs) and no matter which one or how I set it up, I can't get what I want. Will this one work? I just want to plot the prior day fibs on the current day chart.
Click to expand...

See if changing the inputs on the above script provide what you want. You can also set the upper and lower extended fibs to yes if the current day is out of range of the prior day.

Capture.jpg
Click to expand...
 
SleepyZ said:
See if changing the inputs on the above script provide what you want. You can also set the upper and lower extended fibs to yes if the current day is out of range of the prior day.
Click to expand...
This seems be something similar I'm looking for.

Does anyone have fib level code in which fib levels will be plotted only from RTH 930Am to 4 pm for current time frame?
( pre/post market data on, however not used to plot fib levels)
 
APOT7 said:
This seems be something similar I'm looking for.

Does anyone have fib level code in which fib levels will be plotted only from RTH 930Am to 4 pm for current time frame?
( pre/post market data on, however not used to plot fib levels)
Click to expand...
Try setting periods back to 0 in above input screen image along with the other settings shown in the image.
 
APOT7 said:
I'm not familiar with coding but let me try to change around the numbers to see if they produce setting I'm looking for
Click to expand...

Here is the code with the adjustments to the input screen and within the code to see if it meets your request.

Capture.jpg
Ruby: 
#FibChoices v1
#Request usethinkscript.com @theelderwand to duplicate a swimdicators video's chart's indicator
#BLT 20191224

#v1 20191228 per request @zeek, changed time range method so that timerange_begin/timerange_end inputs would allow for post close of prior day, current day premarket, and custom user time ranges, with the Fibonacci lines drawn across the entire chart.


input method = {default aggregation, developing_reg_thrs, developing_ext_thrs, time_range};

input aggregation              = AggregationPeriod.DAY;
input aggregation_periodsback  = 0;

input timerange_begin  = 0930;
input timerange_end    = 1600;
# Examples: pre-market setting: 0000,0929; previous close through pre-market: 1600,0929;
# intraday opening range: 0930,1030

input display_upper_extended_fibs = no;
input display_lower_extended_fibs = no;

input fib1 = .236;
input fib2 = .382;
input fib3 = .500;
input fib4 = .618;
input fib5 = .764;

input showchart_bubbles = yes;
input bubble_option     = {default fiblevel, pricelevel};
input bubblemover       = 1; #used to move the bubble left and right

def bn = BarNumber();
#Time Range - Determines High/Low Where TimeRange_Begin Times are Between 1600 and 2359 Following the Prior Day's Close
def globexOpen   = if (if GetDayOfWeek(GetYYYYMMDD()) == 1 then SecondsFromTime(timerange_begin) >= 0 else SecondsFromTime(timerange_begin) >= 0) or SecondsFromTime(timerange_end) < 0 then 1 else 0;
def globexReset  = if globexOpen and !globexOpen[1] then 1 else 0;
def globexHigh   = CompoundValue(1, If((high > globexHigh[1] and globexOpen) or globexReset, high, globexHigh[1]), high);
def globexLow    = CompoundValue(1, If((low < globexLow[1] and globexOpen) or globexReset, low, globexLow[1]), low);
def globexhighbn = if high == (globexHigh) then bn else globexhighbn[1];
def globexlowbn  = if low == (globexLow) then bn else globexlowbn[1];

#Time Range - Determines High/Low with TimeRange_Begin Times From 0000 for PreMarket, Current Day or Intraday Pereiods
def day     = GetDay() == GetLastDay();
def lastday = if day and SecondsFromTime(timerange_begin) >= 0 then bn else Double.NaN;
def hhamt   = if day and bn == LowestAll(lastday) then high else if SecondsFromTime(timerange_end) <= 0 then Max(high, hhamt[1]) else hhamt[1];
def hhbn    = if high == (hhamt) then bn else hhbn[1];
def llamt   = if day and bn == LowestAll(lastday)  then low else if SecondsFromTime(timerange_end) <= 0 then Min(low, llamt[1]) else llamt[1];
def llbn    = if low == (llamt) then bn else llbn[1];

#Fibonacci High/Lows Determined based upon input method selected
def hh;
def ll;

switch (method){
#
case aggregation:
    hh = high(period = aggregation)[aggregation_periodsback];
    ll = low(period = aggregation)[aggregation_periodsback];
#
case developing_reg_thrs:
    hh = if GetTime() crosses above RegularTradingStart(GetYYYYMMDD()) then high else if GetTime() > RegularTradingStart(GetYYYYMMDD()) and high > hh[1] then high else hh[1];
    ll = if GetTime() crosses above RegularTradingStart(GetYYYYMMDD()) then low else if GetTime() > RegularTradingStart(GetYYYYMMDD()) and low < ll[1] then low else ll[1];
#
case developing_ext_thrs:
    hh = if GetTime() crosses above RegularTradingEnd(GetYYYYMMDD()) then high else if high > hh[1] then high else hh[1];
    ll = if GetTime() crosses above RegularTradingEnd(GetYYYYMMDD()) then low else if low < ll[1] then low else ll[1];
#
case time_range:
#Lines will display across the entire chart
    hh = if Between(timerange_begin, 1600, 2359) then HighestAll(if BarNumber() == HighestAll(globexhighbn) then globexHigh else Double.NaN) else HighestAll(if bn == HighestAll(hhbn) then (hhamt) else Double.NaN);
    ll = if Between(timerange_begin, 1600, 2359) then LowestAll(if BarNumber() == HighestAll(globexlowbn) then globexLow else Double.NaN) else LowestAll(if bn == HighestAll(llbn) then llamt else Double.NaN);

}

#Fibonacci Line Plots
def range  = hh - ll;
def f1   = ll + range * fib1;
def f2   = ll + range * fib2;
def f3   = ll + range * fib3;
def f4   = ll + range * fib4;
def f5   = ll + range * fib5;
def hh1  = hh;
def ll1  = ll;
def ff1  = f1;
def ff2  = f2;
def ff3  = f3;
def ff4  = f4;
def ff5  = f5;

input fib_line_choice = {default horizontal, points, dashes};
def paintingStrategy = if fib_line_choice == fib_line_choice.horizontal then PaintingStrategy.HORIZONTAL else if fib_line_choice == fib_line_choice.points then PaintingStrategy.POINTS else PaintingStrategy.DASHES;

plot hhp = hh1;
hhp.SetPaintingStrategy(paintingStrategy);
hhp.SetDefaultColor(Color.GREEN);
hhp.SetLineWeight(1);

plot llp =  ll1;
llp.SetPaintingStrategy(paintingStrategy);
llp.SetDefaultColor(Color.RED);
llp.SetLineWeight(1);

plot f1p =  ff1;
f1p.SetPaintingStrategy(paintingStrategy);
f1p.SetDefaultColor(Color.YELLOW);
f1p.SetLineWeight(1);

plot f2p =  ff2;
f2p.SetPaintingStrategy(paintingStrategy);
f2p.SetDefaultColor(Color.YELLOW);
f2p.SetLineWeight(1);

plot f3p =  ff3;
f3p.SetPaintingStrategy(paintingStrategy);
f3p.SetDefaultColor(Color.WHITE);
f3p.SetLineWeight(1);

plot f4p = ff4;
f4p.SetPaintingStrategy(paintingStrategy);
f4p.SetDefaultColor(Color.YELLOW);
f4p.SetLineWeight(1);

plot f5p =  ff5;
f5p.SetPaintingStrategy(paintingStrategy);
f5p.SetDefaultColor(Color.YELLOW);
f5p.SetLineWeight(1);

#Fibonacci - Upper Extended Fib Lines
plot uhhp = if display_upper_extended_fibs == no then Double.NaN else range + hh1;
uhhp.SetPaintingStrategy(paintingStrategy);
uhhp.SetDefaultColor(Color.GREEN);
uhhp.SetLineWeight(1);

plot uf1p = if  display_upper_extended_fibs == no then Double.NaN else range + ff1;
uf1p.SetPaintingStrategy(paintingStrategy);
uf1p.SetDefaultColor(Color.YELLOW);
uf1p.SetLineWeight(1);

plot uf2p = if  display_upper_extended_fibs == no then Double.NaN else range + ff2;
uf2p.SetPaintingStrategy(paintingStrategy);
uf2p.SetDefaultColor(Color.YELLOW);
uf2p.SetLineWeight(1);

plot uf3p = if  display_upper_extended_fibs == no then Double.NaN else range + ff3;
uf3p.SetPaintingStrategy(paintingStrategy);
uf3p.SetDefaultColor(Color.WHITE);
uf3p.SetLineWeight(1);

plot uf4p = if  display_upper_extended_fibs == no then Double.NaN else range + ff4;
uf4p.SetPaintingStrategy(paintingStrategy);
uf4p.SetDefaultColor(Color.YELLOW);
uf4p.SetLineWeight(1);

plot uf5p = if  display_upper_extended_fibs == no then Double.NaN else range + ff5;
uf5p.SetPaintingStrategy(paintingStrategy);
uf5p.SetDefaultColor(Color.YELLOW);
uf5p.SetLineWeight(1);

#Fibonacci - Lower Extended Fib Lines
plot Lllp = if  display_lower_extended_fibs == no then Double.NaN else ll - range;
Lllp.SetPaintingStrategy(paintingStrategy);
Lllp.SetDefaultColor(Color.RED);
Lllp.SetLineWeight(1);

plot Lf1p = if  display_lower_extended_fibs == no then Double.NaN else ll - range * fib1;
Lf1p.SetPaintingStrategy(paintingStrategy);
Lf1p.SetDefaultColor(Color.YELLOW);
Lf1p.SetLineWeight(1);

plot Lf2p = if display_lower_extended_fibs == no then Double.NaN else ll - range * fib2;
Lf2p.SetPaintingStrategy(paintingStrategy);
Lf2p.SetDefaultColor(Color.YELLOW);
Lf2p.SetLineWeight(1);

plot Lf3p = if display_lower_extended_fibs == no then Double.NaN else ll - range * fib3;
Lf3p.SetPaintingStrategy(paintingStrategy);
Lf3p.SetDefaultColor(Color.WHITE);
Lf3p.SetLineWeight(1);

plot Lf4p = if  display_lower_extended_fibs == no then Double.NaN else ll - range * fib4;
Lf4p.SetPaintingStrategy(paintingStrategy);
Lf4p.SetDefaultColor(Color.YELLOW);
Lf4p.SetLineWeight(1);

plot Lf5p = if display_lower_extended_fibs == no then Double.NaN else ll - range * fib5;
Lf5p.SetPaintingStrategy(paintingStrategy);
Lf5p.SetDefaultColor(Color.YELLOW);
Lf5p.SetLineWeight(1);

#Bubbles Displaying Fib Levels in Right Expansion
def n   = bubblemover;
def n1  = n + 1;
AddChartBubble(showchart_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), hhp[n1], 1, Color.GRAY, yes);
AddChartBubble(showchart_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), ff1[n1], fib1, Color.GRAY, yes);
AddChartBubble(showchart_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), ff2[n1], fib2, Color.GRAY, yes);
AddChartBubble(showchart_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), ff3[n1], fib3, Color.GRAY, yes);
AddChartBubble(showchart_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), ff4[n1], fib4, Color.GRAY, yes);
AddChartBubble(showchart_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), ff5[n1], fib5, Color.GRAY, yes);
AddChartBubble(showchart_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), llp[n1], 0, Color.GRAY, yes);
AddChartBubble(showchart_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), uf1p[n1], 1 + fib1, Color.GRAY, yes);
AddChartBubble(showchart_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), uf2p[n1], 1 + fib2, Color.GRAY, yes);
AddChartBubble(showchart_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), uf3p[n1], 1 + fib3, Color.GRAY, yes);
AddChartBubble(showchart_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), uf4p[n1], 1 + fib4, Color.GRAY, yes);
AddChartBubble(showchart_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), uf5p[n1], 1 + fib5, Color.GRAY, yes);
AddChartBubble(showchart_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), Lf1p[n1], -fib1, Color.GRAY, yes);
AddChartBubble(showchart_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), Lf2p[n1], -fib2, Color.GRAY, yes);
AddChartBubble(showchart_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), Lf3p[n1], -fib3 , Color.GRAY, yes);
AddChartBubble(showchart_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), Lf4p[n1], -fib4, Color.GRAY, yes);
AddChartBubble(showchart_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), Lf5p[n1], -fib5, Color.GRAY, yes);
AddChartBubble(showchart_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), uhhp[n1], 2, Color.GRAY, yes);
AddChartBubble(showchart_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), Lllp[n1], -1, Color.GRAY, yes);

#Hiding Fib Line Price Levels Usually Displayed on Right Price Axis
hhp.HideBubble();
llp.HideBubble();
uhhp.HideBubble();
Lllp.HideBubble();
f1p.HideBubble();
f2p.HideBubble();
f3p.HideBubble();
f4p.HideBubble();
f5p.HideBubble();
Lf1p.HideBubble();
Lf2p.HideBubble();
Lf3p.HideBubble();
Lf4p.HideBubble();
Lf5p.HideBubble();
uf1p.HideBubble();
uf2p.HideBubble();
uf3p.HideBubble();
uf4p.HideBubble();
uf5p.HideBubble();
Click to expand...
 
APOT7 said:
How can I get the lines to be displayed only from 930am to 4pM? and not across the chart. thank you
Click to expand...

Rather than modifying the script I used above, I think this script may be more useful and easier to modify to your liking.

Capture.jpg
Ruby: 
input display_rthrs_only = yes;

input ShowTodayOnly      = { default "No", "Yes"};
def s                    = ShowTodayOnly;
input period             = {default "Day", "Week", "Month"};
def closeByPeriod        = close(period = period)[-1];
def rthrs = SecondsFromTime(0930) >= 0 and SecondsTillTime(1600) > 0;


input Fpos236 = .236;
input Fpos382 = .382;
input Fpos50  = .5;
input Fpos618 = .618;
input Fpos786 = .786;

def rhi =  if display_rthrs_only then if !rthrs then Double.NaN else high(period = period) else high(period = period);
def rlo =  if display_rthrs_only then if !rthrs then Double.NaN else low(period = period) else low(period = period);

def range  = rhi - rlo;
def F236   = rhi - (range * Fpos236);
def F382   = rhi - (range * Fpos382);
def F50    = rhi - (range * Fpos50);
def F618   = rhi - (range * Fpos618);
def F786   = rhi - (range * Fpos786);

plot ORH;
plot ORL;
plot Fib50;
plot Fib236;
plot Fib382;
plot Fib618;
plot Fib786;
if ShowTodayOnly and !IsNaN(closeByPeriod)
then {
    ORH      = Double.NaN;
    ORL      = Double.NaN;
    Fib50    = Double.NaN;
    Fib236   = Double.NaN;
    Fib382   = Double.NaN;
    Fib618   = Double.NaN;
    Fib786   = Double.NaN;

} else {
    ORH      = rhi;
    ORL      = rlo;
    Fib50    = F50;
    Fib236   = F236;
    Fib382   = F382;
    Fib618   = F618;
    Fib786   = F786;

}
;


ORH.SetDefaultColor(Color.GREEN);
ORH.SetStyle(Curve.LONG_DASH);
ORH.SetLineWeight(2);

ORL.SetDefaultColor(Color.RED);
ORL.SetStyle(Curve.LONG_DASH);
ORL.SetLineWeight(2);

Fib50.SetDefaultColor(Color.WHITE);
Fib50.SetStyle(Curve.LONG_DASH);
Fib50.SetLineWeight(1);

Fib236.SetDefaultColor(Color.CYAN);
Fib236.SetStyle(Curve.LONG_DASH);
Fib236.SetLineWeight(1);

Fib382.SetDefaultColor(Color.MAGENTA);
Fib382.SetStyle(Curve.LONG_DASH);
Fib382.SetLineWeight(1);

Fib618.SetDefaultColor(Color.YELLOW);
Fib618.SetStyle(Curve.LONG_DASH);
Fib618.SetLineWeight(1);

Fib786.SetDefaultColor(Color.DARK_RED);
Fib786.SetStyle(Curve.LONG_DASH);
Fib786.SetLineWeight(2);

input showbubbles = yes;

input bubblemover = 5;
def m = bubblemover;
def m1 = m + 1;
AddChartBubble(showbubbles and IsNaN(ORH[m]) and !IsNaN(ORH[m1]), ORH[m1], "H", ORH.TakeValueColor());
AddChartBubble(showbubbles and IsNaN(ORL[m]) and !IsNaN(ORL[m1]), ORL[m1], "L", ORL.TakeValueColor());
AddChartBubble(showbubbles and IsNaN(Fib50[m]) and !IsNaN(Fib50[m1]), Fib50[m1], "50", Fib50.TakeValueColor());
AddChartBubble(showbubbles and IsNaN(Fib236[m]) and !IsNaN(Fib236[m1]), Fib236[m1], "236", Fib236.TakeValueColor());
AddChartBubble(showbubbles and IsNaN(Fib382[m]) and !IsNaN(Fib382[m1]), Fib382[m1], "382", Fib382.TakeValueColor());
AddChartBubble(showbubbles and IsNaN(Fib618[m]) and !IsNaN(Fib618[m1]), Fib618[m1], "618", Fib618.TakeValueColor());
AddChartBubble(showbubbles and IsNaN(Fib786[m]) and !IsNaN(Fib786[m1]), Fib786[m1], "786", Fib786.TakeValueColor());
Click to expand...
 
SleepyZ said:
Rather than modifying the script I used above, I think this script may be more useful and easier to modify to your liking.
Click to expand...
Hi SleepyZ, how do you draw Fibline between H and L. I added the following but it did not draw the fibe line

plot HL = if !IsNaN(L) then L else H;
HL.EnableApproximation();
HL.SetLineWeight(3);
HL.SetDefaultColor(Color.PINK);
 
majidg said:
Hi SleepyZ, how do you draw Fibline between H and L. I added the following but it did not draw the fibe line

plot HL = if !IsNaN(L) then L else H;
HL.EnableApproximation();
HL.SetLineWeight(3);
HL.SetDefaultColor(Color.PINK);
Click to expand...

Add this to bottom of the code and see if it helps

Ruby: 
plot lo = if low == rlo then 1 else 0;
plot hi = if high == rhi then 1 else 0;

plot hilo =  if hi then rhi else if lo then low else Double.NaN;
hilo.EnableApproximation();
Click to expand...
 
SleepyZ said:
Rather than modifying the script I used above, I think this script may be more useful and easier to modify to your liking.
Click to expand...
Hi, I input the entire modified script and the bubbles show up but not the lines. Am I doing it wrong?
 
Rise said:
Hi, I input the entire modified script and the bubbles show up but not the lines. Am I doing it wrong?
Click to expand...

I just checked it and it seems to be plotting correctly.

The input to display only during regular trading hours is defaulted to yes, so that the lines will not show for today until those hours. That is how the person requesting wanted it. Set that input to 'no' to see if the lines show up as you expected. If not, then let me know what symbol and timeframe you are having trouble with.
 
Does anyone know of an auto Fibonacci indicator that mimics the TOS Fibonacci Tool inside the TOS Charts?

Where it shows the price level, and the percentage?


I see different ones from TOMSK, and Mobius
 
tomsk said:
Folks here is version 1.3 of the Auto Fib study that now displays the bubbles on the right of the chart.
Please ensure that you increase the expansion area to that the bubbles have room to be displayed
Personally I set that to 22 on my chart settings

Chart Settings > Time Axis > Expansion Area

Given several changes to this code from the first time it was posted by @BenTen in 2018, I have created a change log
It details the various modifications to the base code that was made including a really nice cleaned up version from @theelderwand

Hope this helps

Code: 
# Auto Fib V1.3
# tomsk
# 11.19.2019

# Automatically draws fibonacci retracements using the highest price and lowest price
# from the current view and timeframe.
#
# Fibonacci retracements use horizontal lines to indicate areas of support or resistance
# at the key Fibonacci levels before it continues in the original direction. These levels
# are created by drawing a trendline between two extreme points and then dividing the
# vertical distance by the key Fibonacci ratios of: 23.6%, 38.2%, 50%, 61.8%, 78.6%, and 100%.

# CHANGE LOG
#
# V1.0 - 12.18.2018 - BenTen       - Initial release of Auto Fib, created by Ryan Hendricks
# V1.1 - 11.15.2019 - theelderwand - As script was difficult to read, made the following enhancements
#                                    Expands to right
#                                    Doesn't expand to left
#                                    Custom colors for Fibonacci bars (0.618 is GOLD color)
#                                    Custom line weights
#                                    Code is modularized so you can add extra plots as needed
# V1.2 - 11.15.2019 - tomsk        - Added an input selector for the colors of the label. You
#                                    can select from any of the colors listed - red, orange,
#                                    green, etc and bubbles for all the fib retracements will
#                                    utilize that color.
# V1.3 - 11.19.2019 - tomsk        - Modified the AddChartBubbles to be displayed on the right
#                                    side of the chart. Please ensure that you increase the
#                                    expansion area to that the bubbles have room to be displayed
#                                    Chart Settings > Time Axis > Expansion Area

#hint Price: Price used in the alerts on crossing retracement lines. <b>(Default is Close)</b>

#hint coefficient_0: Retracement Line 0: Retracement from the highest high to the lowest low.<b>(Default is 0%)</b>
#hint Coefficient_1: Retracement Line 1: Retracement from the highest high to the lowest low.<b>(Default is 23.6%)</b>
#hint Coefficient_2: Retracement Line 2: Retracement from the highest high to the lowest low.<b>(Default is 38.2%)</b>
#hint Coefficient_3: Retracement Line 3: Retracement from the highest high to the lowest low.<b>(Default is 50%)</b>
#hint Coefficient_4: Retracement Line 4: Retracement from the highest high to the lowest low.<b>(Default is 61.8%)</b>
#hint Coefficient_5: Retracement Line 5: Retracement from the highest high to the lowest low.<b>(Default is 78.6%)</b>
#hint Coefficient_6: Retracement Line 6: Retracement from the highest high to the lowest low.<b>(Default is 100%)</b>

#wizard input: Price
#wizard text: Inputs: Price:
#wizard input: coefficient_0
#wizard text: coefficient_0:
#wizard input: Coefficient_1
#wizard text: Coefficient_1:
#wizard input: Coefficient_2
#wizard text: Coefficient_2:
#wizard input: Coefficient_3
#wizard text: Coefficient_3:
#wizard input: Coefficient_4
#wizard text: Coefficient_4:
#wizard input: Coefficient_5
#wizard text: Coefficient_5:
#wizard input: Coefficient_6
#wizard text: Coefficient_6:

input price = close;
input high = high;
input low = low;
input coefficient_0 = 0.000;
input coefficient_1 = .236;
input Coefficient_2 = .382;
input Coefficient_3 = .500;
input Coefficient_4 = .618;
Input Coefficient_5 = .786;
input Coefficient_6 = 1.000;

input LabelColor = {default "MAGENTA", "CYAN", "PINK", "LIGHT_GRAY", "ORANGE", "RED", "GREEN", "GRAY", "WHITE"};
input n = 3;

def n1  = n + 1;
def a = HighestAll(high);
def b = LowestAll(low);
def barnumber = barNumber();
def c = if high == a then barnumber else double.nan;
def d = if low == b then barnumber else double.nan;
rec highnumber = compoundValue(1, if IsNaN(c) then highnumber[1] else c, c);
def highnumberall = HighestAll(highnumber);
rec lownumber = compoundValue(1, if IsNaN(d) then lownumber[1] else d, d);
def lownumberall = LowestAll(lownumber);

def upward = highnumberall > lownumberall;
def downward = highnumberall < lownumberall;

def x = AbsValue(lownumberall - highnumberall );

def slope = (a - b) / x;
def slopelow = (b - a) / x;

def day = getDay();
def month = getMonth();
def year = getYear();
def lastDay = getLastDay();
def lastmonth = getLastMonth();
def lastyear = getLastYear();
def isToday = if(day == lastDay and month == lastmonth and year == lastyear, 1, 0);
def istodaybarnumber = HighestAll(if isToday then barnumber else double.nan);
def line = b + (slope * (barnumber - lownumber));
def linelow = a + (slopelow * (barnumber - highnumber));
def currentlinelow = if barnumber <= lownumberall then linelow else double.nan;
def currentline = if barnumber <= highnumberall then line else double.nan;

Plot FibFan =  if  downward then currentlinelow else if upward then currentline else double.nan;
FibFan.SetStyle(Curve.SHORT_DASH);
FibFan.AssignValueColor(color.red);
fibfan.hidebubble();

def range =  a - b;

def value0 = range * coefficient_0;
def value1 = range * coefficient_1;
def value2 = range * coefficient_2;
def value3 = range * coefficient_3;
def value4 = range * coefficient_4;
def value5 = range * coefficient_5;
def value6 = range * coefficient_6;

def condition1 = downward and barnumber >= highnumberall;
def condition2 = upward and barnumber >= lownumberall;

Plot Retracement0 = if condition1 then highestall(b + value0) else if condition2 then highestall(a - value0) else double.nan;
Plot Retracement1 = if condition1 then highestall(b + value1) else if condition2 then highestall(a - value1) else double.nan;
Plot Retracement2 = if condition1 then highestall(b + value2) else if condition2 then highestall(a - value2) else double.nan;
Plot Retracement3 = if condition1 then highestall(b + value3) else if condition2 then highestall(a - value3) else double.nan;
Plot Retracement4 = if condition1 then highestall(b + value4) else if condition2 then highestall(a - value4) else double.nan;
Plot Retracement5 = if condition1 then highestall(b + value5) else if condition2 then highestall(a - value5) else double.nan;
Plot Retracement6 = if condition1 then highestall(b + value6) else if condition2 then highestall(a - value6) else double.nan;

Retracement0.assignvaluecolor(CreateColor(255,255,255));
Retracement0.setLineWeight(4);
retracement0.hidebubble();
AddChartBubble((downward and close[n1]) and IsNaN(close[n]), retracement0, concat( (coefficient_0 * 100), "%"), GetColor(LabelColor), yes);
AddChartBubble((upward and close[n1]) and IsNaN(close[n]), retracement0, concat( (coefficient_0 * 100), "%"), GetColor(LabelColor), yes);

Retracement1.assignvaluecolor(CreateColor(173,216,230));
Retracement1.setLineWeight(2);
retracement1.hidebubble();
AddChartBubble((downward and close[n1]) and IsNaN(close[n]), retracement1, concat( (coefficient_1 * 100), "%"), GetColor(LabelColor), yes);
AddChartBubble((upward and close[n1]) and IsNaN(close[n]), retracement1, concat( (coefficient_1 * 100), "%"), GetColor(LabelColor), yes);

Retracement2.assignvaluecolor(CreateColor(0,197,49));
Retracement2.setLineWeight(2);
retracement2.hidebubble();
AddChartBubble((downward and close[n1]) and IsNaN(close[n]), retracement2, concat( (coefficient_2 * 100), "%"), GetColor(LabelColor), yes);
AddChartBubble((upward and close[n1]) and IsNaN(close[n]), retracement2, concat( (coefficient_2 * 100), "%"), GetColor(LabelColor), yes);

Retracement3.assignvaluecolor(CreateColor(255,64,64));
Retracement3.setLineWeight(3);
retracement3.hidebubble();
AddChartBubble((downward and close[n1]) and IsNaN(close[n]), retracement3, concat( (coefficient_3 * 100), "%"), GetColor(LabelColor), yes);
AddChartBubble((upward and close[n1]) and IsNaN(close[n]), retracement3, concat( (coefficient_3 * 100), "%"), GetColor(LabelColor), yes);

Retracement4.assignvaluecolor(CreateColor(255,215,0));
Retracement4.setLineWeight(5);
retracement4.hidebubble();
AddChartBubble((downward and close[n1]) and IsNaN(close[n]), retracement4, concat( (coefficient_4 * 100), "%"), GetColor(LabelColor), yes);
AddChartBubble((upward and close[n1]) and IsNaN(close[n]), retracement4, concat( (coefficient_4 * 100), "%"), GetColor(LabelColor), yes);

Retracement5.assignvaluecolor(CreateColor(0,255,255));
Retracement5.setLineWeight(2);
retracement5.hidebubble();
AddChartBubble((downward and close[n1]) and IsNaN(close[n]), retracement5, concat( (coefficient_5 * 100), "%"), GetColor(LabelColor), yes);
AddChartBubble((upward and close[n1]) and IsNaN(close[n]), retracement5, concat( (coefficient_5 * 100), "%"), GetColor(LabelColor), yes);

Retracement6.assignvaluecolor(CreateColor(255,255,255));
Retracement6.setLineWeight(4);
Retracement6.hidebubble();
AddChartBubble((downward and close[n1]) and IsNaN(close[n]), retracement6, concat( (coefficient_6 * 100), "%"), GetColor(LabelColor), yes);
AddChartBubble((upward and close[n1]) and IsNaN(close[n]), retracement6, concat( (coefficient_6 * 100), "%"), GetColor(LabelColor), yes);

alert((price crosses below Retracement0) , "Price crosses below Retracement Line 0");
alert((price crosses above Retracement0) , "Price crosses above Retracement Line 0");
alert((price crosses below Retracement1) , "Price crosses below Retracement Line 1");
alert((price crosses above Retracement1) , "Price crosses above Retracement Line 1");
alert((price crosses below Retracement2) , "Price crosses below Retracement Line 2");
alert((price crosses above Retracement2) , "Price crosses above Retracement Line 2");
alert((price crosses below Retracement3) , "Price crosses below Retracement Line 3");
alert((price crosses above Retracement3) , "Price crosses above Retracement Line 3");
alert((price crosses below Retracement4) , "Price crosses below Retracement Line 4");
alert((price crosses above Retracement4) , "Price crosses above Retracement Line 4");
alert((price crosses below Retracement5) , "Price crosses below Retracement Line 5");
alert((price crosses above Retracement5) , "Price crosses above Retracement Line 5");
alert((price crosses below Retracement6) , "Price crosses below Retracement Line 6");
alert((price crosses above Retracement6) , "Price crosses above Retracement Line 6");
# End Auto Fib v1.3
Click to expand...
Woke up this morning to see the Auto Fibs no longer appear on mobile anymore. Anyone else have this same issue?
 
Whats a good time setting for Fibs? I have 30 days on but I havent found a clear answer on how many days the chart history should have using fibs thanks
 
Is there a code for auto fib levels to be displayed on 1 year1 day chart, 2 year 1 day chart., etc that can be shown on a 5 min chart or lower time frame? Thank you!
 
Hi,

Thanks for all the work and discussions on this. I love this autofib and use it everyday. This code is based on Fib retracements. But I think if we can develop code for "fib extension" where it can do the price target short or long. I have no coding skills and I appreicate if anyone can help on this.
 
You must log in or register to reply here.

Join useThinkScript to post your question to a community of 21,000+ developers and traders.

SIGN UP NOW LEARN MORE
Thread starter Similar threads Forum Replies Date
T Auto Fib (Fibonacci) Extensions Indicator for ThinkorSwim Indicators 18
Trader_Rich Auto Trend Lines For ThinkOrSwim Indicators 4
rlohmeyer Auto Significant Price Levels for ThinkorSwim Indicators 154
BenTen Auto Volatility Standard Deviation Levels for ThinkorSwim Indicators 23
YungTraderFromMontana Auto Resistance/Support Break Detector Indicators 35

Similar threads

Not the exact question you're looking for?

Start a new thread and receive assistance from our community.

87k+ Posts
352 Online
Create Post

Similar threads

Similar threads

The Market Trading Game Changer

Join 2,500+ subscribers inside the useThinkScript VIP Membership Club
  • Exclusive indicators
  • Proven strategies & setups
  • Private Discord community
  • ‘Buy The Dip’ signal alerts
  • Exclusive members-only content
  • Add-ons and resources
  • 1 full year of unlimited support
Try VIP Club Today

Frequently Asked Questions

What is useThinkScript?

useThinkScript is the #1 community of stock market investors using indicators and other tools to power their trading strategies. Traders of all skill levels use our forums to learn about scripting and indicators, help each other, and discover new ways to gain an edge in the markets.

How do I get started?

We get it. Our forum can be intimidating, if not overwhelming. With thousands of topics, tens of thousands of posts, our community has created an incredibly deep knowledge base for stock traders. No one can ever exhaust every resource provided on our site.

If you are new, or just looking for guidance, here are some helpful links to get you started.

What are the benefits of VIP Membership?
VIP members get exclusive access to these proven and tested premium indicators: Buy the Dip, Advanced Market Moves 2.0, Take Profit, and Volatility Trading Range. In addition, VIP members get access to over 50 VIP-only custom indicators, add-ons, and strategies, private VIP-only forums, private Discord channel to discuss trades and strategies in real-time, customer support, trade alerts, and much more. Learn all about VIP membership here.
How can I access the premium indicators?
To access the premium indicators, which are plug and play ready, sign up for VIP membership here.
Back
Top