Triple TSI For ThinkOrSwim

[Hoinar]

mod note:
The idea is for a three‑speed momentum read (fast / medium / slow). A momentum clarity tool.
Where the tape is aligned, when it’s fading, and when it’s turning into noise. Making entries, exits, and trade selection become cleaner.

All three green confirms bulls are driving the tape. Three red == bears
Blue == messy. Heads Up could be a lull; could be end of trend.

The plan is to use it as confirmation with the Buy The Dip, the Take Profit, and Mobius TMO.
Seems that this is more dynamic than any indicators I have been using, able to pick up better entries and exits. I am seeing it for day and intraday trading


I need help with coding a triple TSI.
One fast TSI(5,3) an average TSI (13, 8) and a slow one (34, 21). How can I combine them in one chart, so when all are moving in the same direction (up-green, down-red) and when there are divergences between them, blue for example? Anybody has this setup, maybe I can try it and tweak it? Thanks in advance.

see following posts for coding suggestions

 

[Svanoy]

@Hoinar
Looks a little messy, Maybe you can clean it up.

declare lower;

input FastlongLength = 5;
input FastshortLength = 3;

input AvglongLength = 13;
input AvgshortLength = 8;

input SlowlongLength = 18;
input SlowshortLength = 21;

input averageType = AverageType.EXPONENTIAL;

def TSIFast = TrueStrengthIndex(averagetype,Fastlonglength,Fastshortlength).Signal;
def TSIAvg = TrueStrengthIndex(averagetype,Avglonglength,Avgshortlength).Signal;
def TSISlow = TrueStrengthIndex(averagetype,Slowlonglength,Slowshortlength).Signal;

def TSIFU = TSIFast>TSIFast[1];
def TSIAU = TSIAvg>TSIAvg[1];
def TSISU = TSISlow>TSISlow[1];

def TSIFD = TSIFast<TSIFast[1];
def TSIAD = TSIAvg<TSIAvg[1];
def TSISD = TSISlow<TSISlow[1];

plot TSIFP = TSIFast;
TSIFP.AssignValueColor(if TSIFU and TSIAU and TSISU then Color.Green else if TSIFD and TSIAD and TSISD then Color.RED else Color.Blue);
plot TSIAP = TSIAvg;
TSIAP.AssignValueColor(if TSIFU and TSIAU and TSISU then Color.Green else if TSIFD and TSIAD and TSISD then Color.RED else Color.Blue);
plot TSISP = TSISlow;
TSISP.AssignValueColor(if TSIFU and TSIAU and TSISU then Color.Green else if TSIFD and TSIAD and TSISD then Color.RED else Color.Blue);

 

[henry1224]

This may not be what you are looing for but I took your triple TSI , I weighted them then averaged , took the average and broke them down against the zero line, broke the Combo line into 4 regions, color coded them, added deviation zones, added arrows

declare lower;

input AlongLength = 5;
input AshortLength = 3;

input BlongLength = 13;
input BshortLength = 8;

input ClongLength = 21;
input CshortLength =18;

input averageType = AverageType.EXPONENTIAL;

input Arrows = 0;
input Dotsize = 3;
Input APC =0;

def TSIFast = TrueStrengthIndex(averagetype,Alonglength,Ashortlength).Signal;
def TSIAvg = TrueStrengthIndex(averagetype,Blonglength,Bshortlength).Signal;
def TSISlow = TrueStrengthIndex(averagetype,Clonglength,Cshortlength).Signal;
Plot TSICombo = (TSIFast +2*TSIAvg + 3*TSISlow)/6;

Def Con1 = TSICombo>= 0;
Def Con2 = TSICombo < 0;
Def Con3 = TSICombo > TSICombo[1];
Def Con4 = TSICombo < TSICombo[1];
Def BullRise = If Con1 and Con3 then 1 else 0;
Def BullFall = if Con1 and Con4 then 1 else 0;
Def BearFall = if Con2 and Con4 then 1 else 0;
Def BearRise = if Con2 and Con3 then 1 else 0;

TSICombo.assignValueColor(If TSICombo >= TSICombo[1] then Color.Green else Color.Red); 
TSICombo.setLineWeight(3);
AddCloud(TSICombo,0,Color.Green,Color.Red);
plot Hist = TSICombo;
Hist.SetPaintingStrategy(PaintingStrategy.HISTOGRAM);
Hist.AssignValueColor(if BULLRISE ==1 then Color.GREEN else if BULLFALL ==1 then Color.Dark_GREEN else if BearRISE ==1 then Color.red else if Bearfall ==1 then Color.Dark_Red else Color.Gray);

Plot UZ = Average(TSICombo,34) + (1.3185*StDev(TSICombo,34));
UZ.SetPaintingStrategy(PaintingStrategy.Line);
UZ.SetLineWeight(2);
UZ.SetDefaultColor(Color.Yellow);
Plot LZ = Average(TSICombo,34) - (1.3185*StDev(TSICombo,34));
LZ.SetPaintingStrategy(PaintingStrategy.Line);
LZ.SetLineWeight(2);
LZ.SetDefaultColor(Color.Yellow);

#ARROWS
plot ArrowDown = if arrows and (TSICombo Crosses below TSICombo[1]) then TSICombo[1] else double.nan;
ArrowDown.setpaintingStrategy(paintingStrategy.Arrow_Down);
ArrowDown.setDefaultColor(color.Magenta);
ArrowDown.setLineWeight(dotsize);
plot ArrowUp = if arrows and (TSICombo crosses above TSICombo[1]) then TSICombo[1] else double.nan;
ArrowUp.setpaintingStrategy(paintingStrategy.Arrow_Up);
ArrowUp.setDefaultColor(color.Cyan);
ArrowUp.setLineWeight(dotsize);
plot ArrowDown2 = if arrows and (TSICombo Crosses below 0) then 0 else double.nan;
ArrowDown2.setpaintingStrategy(paintingStrategy.Arrow_Down);
ArrowDown2.setDefaultColor(color.Red);
ArrowDown2.setLineWeight(dotsize);
plot ArrowUp2 = if arrows and (TSICombo crosses above 0 ) then 0 else double.nan;
ArrowUp2.setpaintingStrategy(paintingStrategy.Arrow_Up);
ArrowUp2.setDefaultColor(color.Blue);
ArrowUp2.setLineWeight(dotsize);
plot ArrowDown3 = if arrows and (TSICombo Crosses below UZ) then UZ else double.nan;
ArrowDown3.setpaintingStrategy(paintingStrategy.Arrow_Down);
ArrowDown3.setDefaultColor(color.Yellow);
ArrowDown3.setLineWeight(dotsize);
plot ArrowUp3 = if arrows and (TSICombo crosses above LZ ) then LZ else double.nan;
ArrowUp3.setpaintingStrategy(paintingStrategy.Arrow_Up);
ArrowUp3.setDefaultColor(color.Yellow);
ArrowUp3.setLineWeight(dotsize);

AssignPriceColor( if APC ==1 and TSICombo>= TSICombo[1] then Color.Cyan else if APC == 1 and TSICombo < TSICombo[1] then Color.Magenta else If APC ==2 and TSICombo >=0 then Color.Green else If APC ==2 and TSICombo <0 then Color.Red else Color.Current);

 

[Hoinar]

@Hoinar
Looks a little messy, Maybe you can clean it up.

declare lower;

input FastlongLength = 5;
input FastshortLength = 3;

input AvglongLength = 13;
input AvgshortLength = 8;

input SlowlongLength = 18;
input SlowshortLength = 21;

input averageType = AverageType.EXPONENTIAL;

def TSIFast = TrueStrengthIndex(averagetype,Fastlonglength,Fastshortlength).Signal;
def TSIAvg = TrueStrengthIndex(averagetype,Avglonglength,Avgshortlength).Signal;
def TSISlow = TrueStrengthIndex(averagetype,Slowlonglength,Slowshortlength).Signal;

def TSIFU = TSIFast>TSIFast[1];
def TSIAU = TSIAvg>TSIAvg[1];
def TSISU = TSISlow>TSISlow[1];

def TSIFD = TSIFast<TSIFast[1];
def TSIAD = TSIAvg<TSIAvg[1];
def TSISD = TSISlow<TSISlow[1];

plot TSIFP = TSIFast;
TSIFP.AssignValueColor(if TSIFU and TSIAU and TSISU then Color.Green else if TSIFD and TSIAD and TSISD then Color.RED else Color.Blue);
plot TSIAP = TSIAvg;
TSIAP.AssignValueColor(if TSIFU and TSIAU and TSISU then Color.Green else if TSIFD and TSIAD and TSISD then Color.RED else Color.Blue);
plot TSISP = TSISlow;
TSISP.AssignValueColor(if TSIFU and TSIAU and TSISU then Color.Green else if TSIFD and TSIAD and TSISD then Color.RED else Color.Blue);

Is a great start, what can I say? This in combination with few more indicators (BTD, TP, Mobius TMO) is what I was looking for. This weekend I will be playing with it and test it on different time frames and stocks. Thank you and Ben for putting this community together.

 

[Hoinar]

This may not be what you are looing for but I took your triple TSI , I weighted them then averaged , took the average and broke them down against the zero line, broke the Combo line into 4 regions, color coded them, added deviation zones, added arrows

declare lower;

input AlongLength = 5;
input AshortLength = 3;

input BlongLength = 13;
input BshortLength = 8;

input ClongLength = 21;
input CshortLength =18;

input averageType = AverageType.EXPONENTIAL;

input Arrows = 0;
input Dotsize = 3;
Input APC =0;

def TSIFast = TrueStrengthIndex(averagetype,Alonglength,Ashortlength).Signal;
def TSIAvg = TrueStrengthIndex(averagetype,Blonglength,Bshortlength).Signal;
def TSISlow = TrueStrengthIndex(averagetype,Clonglength,Cshortlength).Signal;
Plot TSICombo = (TSIFast +2*TSIAvg + 3*TSISlow)/6;

Def Con1 = TSICombo>= 0;
Def Con2 = TSICombo < 0;
Def Con3 = TSICombo > TSICombo[1];
Def Con4 = TSICombo < TSICombo[1];
Def BullRise = If Con1 and Con3 then 1 else 0;
Def BullFall = if Con1 and Con4 then 1 else 0;
Def BearFall = if Con2 and Con4 then 1 else 0;
Def BearRise = if Con2 and Con3 then 1 else 0;

TSICombo.assignValueColor(If TSICombo >= TSICombo[1] then Color.Green else Color.Red);
TSICombo.setLineWeight(3);
AddCloud(TSICombo,0,Color.Green,Color.Red);
plot Hist = TSICombo;
Hist.SetPaintingStrategy(PaintingStrategy.HISTOGRAM);
Hist.AssignValueColor(if BULLRISE ==1 then Color.GREEN else if BULLFALL ==1 then Color.Dark_GREEN else if BearRISE ==1 then Color.red else if Bearfall ==1 then Color.Dark_Red else Color.Gray);

Plot UZ = Average(TSICombo,34) + (1.3185*StDev(TSICombo,34));
UZ.SetPaintingStrategy(PaintingStrategy.Line);
UZ.SetLineWeight(2);
UZ.SetDefaultColor(Color.Yellow);
Plot LZ = Average(TSICombo,34) - (1.3185*StDev(TSICombo,34));
LZ.SetPaintingStrategy(PaintingStrategy.Line);
LZ.SetLineWeight(2);
LZ.SetDefaultColor(Color.Yellow);

#ARROWS
plot ArrowDown = if arrows and (TSICombo Crosses below TSICombo[1]) then TSICombo[1] else double.nan;
ArrowDown.setpaintingStrategy(paintingStrategy.Arrow_Down);
ArrowDown.setDefaultColor(color.Magenta);
ArrowDown.setLineWeight(dotsize);
plot ArrowUp = if arrows and (TSICombo crosses above TSICombo[1]) then TSICombo[1] else double.nan;
ArrowUp.setpaintingStrategy(paintingStrategy.Arrow_Up);
ArrowUp.setDefaultColor(color.Cyan);
ArrowUp.setLineWeight(dotsize);
plot ArrowDown2 = if arrows and (TSICombo Crosses below 0) then 0 else double.nan;
ArrowDown2.setpaintingStrategy(paintingStrategy.Arrow_Down);
ArrowDown2.setDefaultColor(color.Red);
ArrowDown2.setLineWeight(dotsize);
plot ArrowUp2 = if arrows and (TSICombo crosses above 0 ) then 0 else double.nan;
ArrowUp2.setpaintingStrategy(paintingStrategy.Arrow_Up);
ArrowUp2.setDefaultColor(color.Blue);
ArrowUp2.setLineWeight(dotsize);
plot ArrowDown3 = if arrows and (TSICombo Crosses below UZ) then UZ else double.nan;
ArrowDown3.setpaintingStrategy(paintingStrategy.Arrow_Down);
ArrowDown3.setDefaultColor(color.Yellow);
ArrowDown3.setLineWeight(dotsize);
plot ArrowUp3 = if arrows and (TSICombo crosses above LZ ) then LZ else double.nan;
ArrowUp3.setpaintingStrategy(paintingStrategy.Arrow_Up);
ArrowUp3.setDefaultColor(color.Yellow);
ArrowUp3.setLineWeight(dotsize);

AssignPriceColor( if APC ==1 and TSICombo>= TSICombo[1] then Color.Cyan else if APC == 1 and TSICombo < TSICombo[1] then Color.Magenta else If APC ==2 and TSICombo >=0 then Color.Green else If APC ==2 and TSICombo <0 then Color.Red else Color.Current);

Henry, thank you also for your help here. Both of you coded what I was looking for and now I just need to test it and use it. Seems that this is more dynamic than any indicators I have been using, able to pick up better entries and exits. I am seeing it for day and intraday trading, but this is great help. Will have plenty of time in front of the computer this weekend and look for productive trades next week.

 

[mrtreasures]

Henry, thank you also for your help here. Both of you coded what I was looking for and now I just need to test it and use it. Seems that this is more dynamic than any indicators I have been using, able to pick up better entries and exits. I am seeing it for day and intraday trading, but this is great help. Will have plenty of time in front of the computer this weekend and look for productive trades next week.

@Hoinar this is looking great, are you looking at the triple sync logic system, just trying to get away from the 3 charts that Tood R uses?? I've done my own triple sync version just using TOS indicators and matching as close as possible to what Todd is doing?? The RSI Laguerre indicators have worked the best, I used 8, 13 and 21 EMA's and SuperTrend without the labels just the dots to give you the entry's from the 2 min & 1 min chart, the 5 min is mainly used for the heads up once in oversold/overbought ranges!! Let me know how you do, Id be willing to give you a code for what I was using if you like the 3 chart setup??

 

[johnnyv15]

Henry, thank you also for your help here. Both of you coded what I was looking for and now I just need to test it and use it. Seems that this is more dynamic than any indicators I have been using, able to pick up better entries and exits. I am seeing it for day and intraday trading, but this is great help. Will have plenty of time in front of the computer this weekend and look for productive trades next week.

@Hi I just started looking at this system. I loaded this thinkscript onto a chart. I am wondering how you are using it?

 

[merryDay]

@Hoinar this is looking great, are you looking at the triple sync logic system

@Hi I just started looking at this system. I loaded this thinkscript onto a chart. I am wondering how you are using it?

Did you know that clicking on a member's avatar will allow you to see when a member was last seen on the uTS forum? @Hoinar has not been back.

To learn more about the True Strength Index:
https://school.stockcharts.com/doku.php?id=technical_indicators:true_strength_index

The OP stated that he looks for:

all are moving in the same direction (up-green, down-red) and when there are divergences between them

 

[docluban]

@Hoinar this is looking great, are you looking at the triple sync logic system, just trying to get away from the 3 charts that Tood R uses?? I've done my own triple sync version just using TOS indicators and matching as close as possible to what Todd is doing?? The RSI Laguerre indicators have worked the best, I used 8, 13 and 21 EMA's and SuperTrend without the labels just the dots to give you the entry's from the 2 min & 1 min chart, the 5 min is mainly used for the heads up once in oversold/overbought ranges!! Let me know how you do, Id be willing to give you a code for what I was using if you like the 3 chart

Thank you for all the work. Would you be willing to share the code that you are using for the 3 chart system?

 

[merryDay]

Thank you for all the work. Would you be willing to share the code that you are using for the 3 chart system?

Did you know that clicking on a member's name will allow you to see when a member was last seen on the uTS forum? @mrtreasures has not been seen in a while.
You can add the indicators that are mentioned in the post.
Get Moving Averages from here:
https://usethinkscript.com/threads/stacked-moving-averages-for-thinkorswim.4719/page-2#post-72617
And choose your favorite SuperTrend:
https://usethinkscript.com/search/8...1&c[nodes][0]=3&c[title_only]=1&o=replies&g=1

 

[ChaChing]

This may not be what you are looing for but I took your triple TSI , I weighted them then averaged , took the average and broke them down against the zero line, broke the Combo line into 4 regions, color coded them, added deviation zones, added arrows

Thank you for this code. even without totally under standing it I able to make better entry/exits. I would like to learn how to use it more efficiently, can you point me in the right direction. sincerely

 

[merryDay]

Thank you for this code. even without totally under standing it I able to make better entry/exits. I would like to learn how to use it more efficiently, can you point me in the right direction. sincerely

The True Strength Index (TSI) can be used for various purposes.
Google these search terms to determine which purpose suits you best:

• spotting divergences
• determining overbought/oversold conditions
• and generating trading signals.

 

[ChaChing]

The True Strength Index (TSI) can be used for various purposes.
Google these search terms to determine which purpose suits you best:

• spotting divergences
• determining overbought/oversold conditions
• and generating trading signals.

thanks