SSL Hybrid For ThinkOrSwim

samer800

Conversion Expert
VIP
Lifetime
SSL Hybrid conversion would be awesome if it's possible in ToS format.
below my conversion of SSL Hybrid For ThinkOrSwim.
https://www.tradingview.com/script/C3MlAWCw-SSL-Hybrid/

need intencive testing. propaply not the best coding but i included all features.
Ruby:
#
#//By Mihkel00
#// This script is designed for the NNFX Method, so it is recommended for Daily charts only.
#// This script has a SSL / Baseline (you can choose between the SSL or MA), a secondary SSL for continiuation #trades and a third SSL for exit trades.
#// Alerts added for Baseline entries, SSL2 continuations, Exits.
#// Baseline has a Keltner Channel setting for "in zone" Gray Candles
#// Added "Candle Size > 1 ATR" Diamonds from my old script with the criteria of being within Baseline ATR range.
#// Strategy causecelebre https://www.tradingview.com/u/causecelebre/
#// SSL Channel ErwinBeckers https://www.tradingview.com/u/ErwinBeckers/
#// Moving Averages jiehonglim https://www.tradingview.com/u/jiehonglim/
#// Moving Averages everget https://www.tradingview.com/u/everget/
#// "Many Moving Averages" script Fractured https://www.tradingview.com/u/Fractured/
#// study("SSL Hybrid")
### Converted by SAM4COK - 07/2022
input show_Baseline = yes; #"Show Baseline"
input SSL1_Line = no; #"Show SSL1"
input SSL2_Line = yes;
input ATR_Bands = yes; #"Show ATR bands"
input CandleMore_1xATR = yes;
input SSL_Channel = yes;
input Show_Arrow = yes;
input Show_Cloud = yes;

#//ATR
input ATR_Period = 14; #"ATR Period"
input ATR_mult = 1; #"ATR Multi"
input ATR_smoothing = {default WMA, RMA, SMA, EMA}; #"ATR Smoothing"
#////BASELINE / SSL1 / SSL2 / EXIT MOVING AVERAGE VALUES
input ssl1_BaselineType = {"SMA", "EMA", "DEMA", "TEMA", "LSMA", "WMA", "MF", "VAMA", "TMA", default "HMA", "JMA", "Kijun_v2", "EDSMA", "McGinley"}; #"SSL1 / Baseline Type"
input SSL1_Length = 60; #"SSL1 / Baseline Length"
input SSL2ContinuType = {"SMA", "EMA", "DEMA", "TEMA", "WMA", "MF", "VAMA", "TMA", "HMA", default "JMA", "McGinley"};
input SSL2_Length = 5; #"SSL 2 Length"
input ExitType = {"DEMA", "TEMA", "LSMA", "VAMA", "TMA", default "HMA", "JMA", "Kijun v2", "McGinley", "MF"}; #"EXIT Type"
input EXIT_Length = 15; #"EXIT Length"
input src = close;
########
input Kijun_MOD_Divider = 1; #"Kijun MOD Divider"
input jurik_phase = 3; #"* Jurik (JMA) Only - Phase"
input jurik_power = 1; #"* Jurik (JMA) Only - Power"
input volatility_lookback = 10; #"* Volatility Adjusted (VAMA) Only - Volatility lookback length"
input FilterBeta = 0.8; #"Modular Filter, General Filter Only - Beta"
input FilterFeedback = no ; #"Modular Filter Only - Feedback"
input FeedbackWeighting = 0.5; #"Modular Filter Only - Feedback Weighting"
#//EDSMA
input EDSMaLength = 20; #"EDSMA - Super Smoother Filter Length"
input EDSMaPoles = {default "2", "3"}; #"EDSMA - Super Smoother Filter Poles"

input useTrueRange = yes;
input Channel_Mult = 0.2; #"Base Channel Multiplier"
input Continu_ATR = 0.9; #"Continuation ATR Criteria"
input show_color_bar = yes;
input sound = {"Ding", "Bell", "Chimes",default "NoSound", "Ring"};

def na = Double.NaN;
def tr = TrueRange (high, close, low);
#################### COLORS ################################
DefineGlobalColor("lowerk", CreateColor(255, 0, 98)); # red
DefineGlobalColor("upperk", CreateColor(0, 195, 255)); # blue
DefineGlobalColor("upbar", CreateColor(38, 166, 154)); # green
DefineGlobalColor("dnbar", CreateColor(239, 83, 80)); # red
##################################################################

def ma_function;
switch (ATR_smoothing) {
case SMA:
ma_function = SimpleMovingAvg(tr, ATR_Period);
case EMA:
ma_function = ExpAverage(tr, ATR_Period);
case WMA:
ma_function = WMA(tr, ATR_Period);
case RMA:
ma_function = WildersAverage(tr, ATR_Period);
}
#atr_slen = ma_function(tr(true), atrlen)
def atr_slen = ma_function;
#////ATR Up/Low Bands
def upper_band = atr_slen * ATR_mult + close;
def lower_band = close - atr_slen * ATR_mult;

############ Scripts###############
script nz {
input data = 0;
input replacement = 0;
def ret_val = if IsNaN(data) then replacement else data;
plot return = ret_val;
}

#get2PoleSSF(src, length) =>
script get2PoleSSF {
input src = close;
input length = 0;
def PI = 2 * ASin(1);
def arg = Sqrt(2) * PI / length;
def a1 = Exp(-arg);
def b1 = 2 * a1 * Cos(arg);
def c2 = b1;
def c3 = -Power(a1, 2);
def c1 = 1 - c2 - c3;
def ssf = c1 * src + c2 * nz(ssf[1]) + c3 * nz(ssf[2]);
plot return = ssf;
}
#get3PoleSSF(src, length) =>
script get3PoleSSF {
input src = close;
input length = 0;
def PI = 2 * ASin(1);
def arg = PI / length;
def a1 = Exp(-arg);
def b1 = 2 * a1 * Cos(1.738 * arg);
def c1 = Power(a1, 2);
def coef2 = b1 + c1;
def coef3 = -(c1 + b1 * c1);
def coef4 = Power(c1, 2);
def coef1 = 1 - coef2 - coef3 - coef4;
def ssf = coef1 * src + coef2 * nz(ssf[1]) + coef3 * nz(ssf[2]) + coef4 * nz(ssf[3]);
plot Return = ssf;
}
###
#tema(src, len) =>
script TEMA {
input src = close;
input len = 0;
def ema1 = ExpAverage(src, len);
def ema2 = ExpAverage(ema1, len);
def ema3 = ExpAverage(ema2, len);
def tema = (3 * ema1) - (3 * ema2) + ema3;
plot return = tema;
}
#DEMA(src, len) =>
script DEMA {
input src = close;
input len = 0;
def e = ExpAverage(src, len);
def DEMA = 2 * e - ExpAverage(e, len);
plot result = DEMA;
}
#VAMA(src, len, volatility_lookback) =>
script VAMA {
input src = close;
input len = 0;
input volatility_lookback = 10;
def mid;
def dev;
def vol_up;
def vol_down;
mid = ExpAverage(src, len);
dev = src - mid;
vol_up = Highest(dev, volatility_lookback);
vol_down = Lowest(dev, volatility_lookback);
def VAMA = mid + (vol_up + vol_down) / 2;
plot result = VAMA;
}
#mf(src, len, z, beta, feedback)
script MF {
input src = close;
input len = 0;
input z = 0;
input beta = 0.8;
input feedback = no;
def ts;
def alpha = 2 / (len + 1);
def a = if feedback then z * src + (1 - z) * nz(ts[1], src) else src;
def b = if a > alpha * a + (1 - alpha) * nz(b[1], a) then a else alpha * a + (1 - alpha) * nz(b[1], a);
def c = if a < alpha * a + (1 - alpha) * nz(c[1], a) then a else alpha * a + (1 - alpha) * nz(c[1], a);
def os = if a == b then 1 else if a == c then 0 else os[1];
def upper = beta * b + (1 - beta) * c;
def lower = beta * c + (1 - beta) * b;
ts = os * upper + (1 - os) * lower;
plot result = ts;
}
#JMA(src, len, jurik_phase, jurik_power)
script JMA {
input src = close;
input len = 0;
input jurik_phase = 3;
input jurik_power = 1;
def jma;
def phaseRatio = if jurik_phase < -100 then 0.5 else
if jurik_phase > 100 then 2.5 else jurik_phase / 100 + 1.5;
def beta = 0.45 * (len - 1) / (0.45 * (len - 1) + 2);
def alpha = Power(beta, jurik_power);
def e0 = (1 - alpha) * src + alpha * nz(e0[1]);
def e1 = (src - e0) * (1 - beta) + beta * nz(e1[1]);
def e2 = (e0 + phaseRatio * e1 - nz(jma[1])) * Power(1 - alpha, 2) + Power(alpha, 2) * nz(e2[1]);
jma = e2 + nz(jma[1]);
plot result = jma;
}
#Kijun_v2(src, len, kidiv)
script Kijun_v2 {
input src = close;
input len = 0;
input kidiv = 1;
def kijun = (Lowest(src, len) + Highest(src, len)) / 2;
def conversionLine = (Lowest(src, len / kidiv) + Highest(src, len / kidiv)) / 2;
def delta = (kijun + conversionLine) / 2;
plot result = delta;
}
#McGinley(src, len)
script mg {
input src = close;
input len = 0;
def McGinley = McGinley[1] + (src - McGinley[1]) / (len * Power(src / McGinley[1], 4));
def MDI = ExpAverage(src, len)[1];
def mg = if IsNaN(MDI) then ExpAverage(src, len) else
MDI[1] + (src - MDI[1]) / (len * Power(src / MDI[1], 4));
plot result = mg;
}
#EDSMA(src, len,ssfLength, ssfPoles)
script EDSMA {
input src = close;
input len = 0;
input ssfLength = 20;
input ssfPoles = 2;
def zeros = src - nz(src[2]);
def avgZeros = (zeros + zeros[1]) / 2;
def ssf = if ssfPoles == 2 then get2PoleSSF(avgZeros, ssfLength) else
get3PoleSSF(avgZeros, ssfLength);
def stdev = StDev(ssf, len);
def scaledFilter = if stdev != 0 then ssf / stdev else 0;
def alpha = 5 * AbsValue(scaledFilter) / len;
def edsma = alpha * src + (1 - alpha) * nz(edsma[1]);
plot result = edsma;
}
#mama(type, src, len, z, beta, feedback, jurik_phase, jurik_power, kidiv, ssfLength, ssfPoles, volatility_lookback)
script ma {
input type = "SMA";
input src = close;
input len = 0;
input z = 0.5;
input beta = 0.8;
input feedback = no;
input jurik_phase = 3;
input jurik_power = 1;
input kidiv = 1;
input ssfLength = 20;
input ssfPoles = 2;
input volatility_lookback = 10;
def ma = if type == "TMA" then
SimpleMovingAvg(SimpleMovingAvg(src, Ceil(len / 2)), Floor(len / 2) + 1) else
if type == "MF" then
mf(src, len, z, beta, feedback) else
if type == "LSMA" then
Inertia(src, len) else
if type == "SMA" then
SimpleMovingAvg(src, len) else
if type == "EMA" then
ExpAverage(src, len) else
if type == "DEMA" then
DEMA(src, len) else
if type == "TEMA" then
TEMA(src, len) else
if type == "WMA" then
WMA(src, len) else
if type == "VAMA" then
VAMA(src, len, volatility_lookback) else
if type == "HMA" then
WMA(2 * WMA(src, len / 2) - WMA(src, len), Round(Sqrt(len))) else
if type == "JMA" then
JMA(src, len, jurik_phase, jurik_power) else
if type == "Kijun_v2" then
Kijun_v2(src, len, kidiv) else
if type == "McGinley" then
mg(src, len) else
EDSMA(src, len, ssfLength, ssfPoles);
plot result = ma;
}
#///SSL 1 and SSL2
#ma(type, src, len, z, beta, feedback, jurik_phase, jurik_power, kidiv, ssfLength, ssfPoles, volatility_lookback)
def emaHigh = ma(type = ssl1_BaselineType, src = high, len = SSL1_Length, z = FeedbackWeighting, beta = FilterBeta, feedback = FilterFeedback, jurik_phase = jurik_phase, jurik_power = jurik_power, kidiv = Kijun_MOD_Divider, ssfLength = EDSMaLength, ssfPoles = EDSMaPoles, volatility_lookback = volatility_lookback);

def emaLow = ma(type = ssl1_BaselineType, src = low, len = SSL1_Length, z = FeedbackWeighting, beta = FilterBeta, feedback = FilterFeedback, jurik_phase = jurik_phase, jurik_power = jurik_power, kidiv = Kijun_MOD_Divider, ssfLength = EDSMaLength, ssfPoles = EDSMaPoles, volatility_lookback = volatility_lookback);

def maHigh = ma(type = SSL2ContinuType, src = high, len = SSL2_Length, z = FeedbackWeighting, beta = FilterBeta, feedback = FilterFeedback, jurik_phase = jurik_phase, jurik_power = jurik_power, kidiv = Kijun_MOD_Divider, ssfLength = EDSMaLength, ssfPoles = EDSMaPoles, volatility_lookback = volatility_lookback);

def maLow = ma(type = SSL2ContinuType, src = low, len = SSL2_Length, z = FeedbackWeighting, beta = FilterBeta, feedback = FilterFeedback, jurik_phase = jurik_phase, jurik_power = jurik_power, kidiv = Kijun_MOD_Divider, ssfLength = EDSMaLength, ssfPoles = EDSMaPoles, volatility_lookback = volatility_lookback);

#///EXIT
def ExitHigh = ma(type = ExitType, src = high, len = EXIT_Length, z = FeedbackWeighting, beta = FilterBeta, feedback = FilterFeedback, jurik_phase = jurik_phase, jurik_power = jurik_power, kidiv = Kijun_MOD_Divider, ssfLength = EDSMaLength, ssfPoles = EDSMaPoles, volatility_lookback = volatility_lookback);

def ExitLow = ma(type = ExitType, src = low, len = EXIT_Length, z = FeedbackWeighting, beta = FilterBeta, feedback = FilterFeedback, jurik_phase = jurik_phase, jurik_power = jurik_power, kidiv = Kijun_MOD_Divider, ssfLength = EDSMaLength, ssfPoles = EDSMaPoles, volatility_lookback = volatility_lookback);

#///Keltner Baseline Channel
def BBMC = ma(type = ssl1_BaselineType, src = close, len = SSL1_Length, z = FeedbackWeighting, beta = FilterBeta, feedback = FilterFeedback, jurik_phase = jurik_phase, jurik_power = jurik_power, kidiv = Kijun_MOD_Divider, ssfLength = EDSMaLength, ssfPoles = EDSMaPoles, volatility_lookback = volatility_lookback);

def Keltma = ma(type = ssl1_BaselineType, src = src, len = SSL1_Length, z = FeedbackWeighting, beta = FilterBeta, feedback = FilterFeedback, jurik_phase = jurik_phase, jurik_power = jurik_power, kidiv = Kijun_MOD_Divider, ssfLength = EDSMaLength, ssfPoles = EDSMaPoles, volatility_lookback = volatility_lookback);
def range = if useTrueRange then tr else high - low;
def rangema = ExpAverage(range, SSL1_Length);
def upperk = Keltma + rangema * Channel_Mult;
def lowerk = Keltma - rangema * Channel_Mult;

#//Baseline Violation Candle
def open_pos = open;
def close_pos = close;
def difference = AbsValue(close - open);
def atr_violation = difference > atr_slen;
def InRange = upper_band > BBMC and lower_band < BBMC;
def candlesize_violation = atr_violation and InRange;

plot candlesize = if CandleMore_1xATR then if candlesize_violation then high else na else na; #"Candle Size > 1xATR"
candlesize.SetDefaultColor(Color.YELLOW);
candlesize.SetPaintingStrategy(PaintingStrategy.TRIANGLES);
candlesize.SetLineWeight(3);

#//SSL1 VALUES
def Hlv = if close > emaHigh then 1 else if close < emaLow then -1 else Hlv[1];
def sslDown = if Hlv < 0 then emaHigh else emaLow;

#//SSL2 VALUES
def Hlv2 = if close > maHigh then 1 else if close < maLow then -1 else Hlv2[1];
def sslDown2 = if Hlv2 < 0 then maHigh else maLow;

#//EXIT VALUES
def Hlv3 = if close > ExitHigh then 1 else if close < ExitLow then -1 else Hlv3[1];
def sslExit = if Hlv3 < 0 then ExitHigh else ExitLow;
def base_cross_Long = close crosses above sslExit;
def base_cross_Short = sslExit crosses above close;
def codiff = if base_cross_Long then 1 else if base_cross_Short then -1 else na;

#//COLORS
AssignPriceColor( if show_color_bar then if close > upperk then GlobalColor("upbar")
else if close < lowerk then GlobalColor("dnbar")
else Color.GRAY else Color.CURRENT);
#//PLOTS
plot ArUp = if Show_Arrow and codiff > 0 then low else na;
plot ArDN = if Show_Arrow and codiff < 0 then high else na;

ArUp.SetPaintingStrategy(PaintingStrategy.ARROW_UP);
ArUp.SetDefaultColor(GlobalColor("upperk"));
ArUp.SetLineWeight(2);

ArDN.SetPaintingStrategy(PaintingStrategy.ARROW_DOWN);
ArDN.SetDefaultColor(GlobalColor("lowerk"));
ArDN.SetLineWeight(2);

def color_bar = if close > upperk then 1 else if close < lowerk then -1 else 0;

plot p1 = if show_Baseline then BBMC else na; #MA Baseline
p1.SetStyle(Curve.FIRM);
p1.AssignValueColor(if color_bar > 0 then GlobalColor("upperk") else
if color_bar < 0 then GlobalColor("lowerk") else Color.GRAY);
p1.SetLineWeight(4);

plot DownPlot = if SSL1_Line then sslDown else na; #"SSL1"
DownPlot.SetStyle(Curve.FIRM);
DownPlot.AssignValueColor(if close > sslDown then GlobalColor("upperk") else
if close < sslDown then GlobalColor("lowerk") else Color.CURRENT);
DownPlot.SetLineWeight(3);

plot up_channel = if SSL_Channel then upperk else na; #"Baseline Upper Channel")
up_channel.SetStyle(Curve.FIRM);
up_channel.AssignValueColor(if color_bar > 0 then GlobalColor("upperk") else
if color_bar < 0 then GlobalColor("lowerk") else Color.GRAY);
up_channel.SetLineWeight(1);

plot low_channel = if SSL_Channel then lowerk else na; #"Basiline Lower Channel")
low_channel.SetStyle(Curve.FIRM);
low_channel.AssignValueColor(if color_bar > 0 then GlobalColor("upperk") else
if color_bar < 0 then GlobalColor("lowerk") else Color.GRAY);
low_channel.SetLineWeight(1);

AddCloud (if Show_Cloud and color_bar > 0 then upperk else na, lowerk, GlobalColor("upperk"));
AddCloud (if Show_Cloud and color_bar < 0 then upperk else na, lowerk, GlobalColor("lowerk"));
AddCloud (if Show_Cloud and !color_bar then upperk else na, lowerk, Color.GRAY);

#////SSL2 Continiuation from ATR
def upper_half = atr_slen * Continu_ATR + close;
def lower_half = close - atr_slen * Continu_ATR;
def buy_inatr = lower_half < sslDown2;
def sell_inatr = upper_half > sslDown2;
def sell_cont = close < BBMC and close < sslDown2;
def buy_cont = close > BBMC and close > sslDown2;
def sell_atr = sell_inatr and sell_cont;
def buy_atr = buy_inatr and buy_cont;
def atr_fill = if buy_atr then 1 else if sell_atr then -1 else 0;

plot LongPlot = if SSL2_Line then sslDown2 else na;
LongPlot.SetPaintingStrategy(PaintingStrategy.LINE_VS_POINTS);
LongPlot.AssignValueColor(if atr_fill > 0 then Color.GREEN else
if atr_fill < 0 then Color.MAGENTA else Color.WHITE);
LongPlot.SetLineWeight(1);

plot u = if ATR_Bands then upper_band else na; # "+ATR", color=color.white, transp=80)
u.SetDefaultColor(Color.GRAY);
plot l = if ATR_Bands then lower_band else na; # "-ATR", color=color.white, transp=80)
l.SetDefaultColor(Color.GRAY);

#//ALERTS
alert(close crosses above sslDown, "SSL1 has crossed", Alert.Bar, sound);
alert(close crosses below sslDown2, "SSL2 has crossed", Alert.Bar, sound);
alert(sell_atr, "Sell Continuation", Alert.Bar, sound);
alert(buy_atr, "Buy Continuation", Alert.Bar, sound);
alert(close crosses above sslExit, "Exit Sell Alert", Alert.Bar, sound);
alert(sslExit crosses below close, "Exit Buy Alert", Alert.Bar, sound);
alert(close crosses above upperk, "Base Buy Alert", Alert.Bar, sound);
alert(lowerk crosses below close, "Base Sell Alert", Alert.Bar, sound);

#####END #########
 
Last edited by a moderator:
Absolutely top notch job on the conversion. You captured the full indicator's value with the transfer to ToS. Thank you very much Samer (y)
 
below my conversion of SSL Hybrid For ThinkOrSwim.
https://www.tradingview.com/script/C3MlAWCw-SSL-Hybrid/

need intencive testing. propaply not the best coding but i included all features.
@samer800 Would it be too much to ask to add a THMA option to the original SSL hyrbid script for the baseline/continuation/exit type please? Would be much appreciated if you are able to find the time to do so. 🙌

"Thma":
hma = wma(wma(src,(length/2) / 3) * 3 - wma(src, (length/2) / 2) - wma(src, (length/2)), (length/2));
}
 
@samer800 Would it be too much to ask to add a THMA option to the original SSL hyrbid script for the baseline/continuation/exit type please? Would be much appreciated if you are able to find the time to do so. 🙌

"Thma":
hma = wma(wma(src,(length/2) / 3) * 3 - wma(src, (length/2) / 2) - wma(src, (length/2)), (length/2));
}
added as requested.

CSS:
#//By Mihkel00
#// This script is designed for the NNFX Method, so it is recommended for Daily charts only.
#// This script has a SSL / Baseline (you can choose between the SSL or MA), a secondary SSL for continiuation #trades and a third SSL for exit trades.
#// Alerts added for Baseline entries, SSL2 continuations, Exits.
#// Baseline has a Keltner Channel setting for "in zone" Gray Candles
#// Added "Candle Size > 1 ATR" Diamonds from my old script with the criteria of being within Baseline ATR range.
#// Strategy causecelebre https://www.tradingview.com/u/causecelebre/
#// SSL Channel ErwinBeckers https://www.tradingview.com/u/ErwinBeckers/
#// Moving Averages jiehonglim https://www.tradingview.com/u/jiehonglim/
#// Moving Averages  everget https://www.tradingview.com/u/everget/
#// "Many Moving Averages" script  Fractured https://www.tradingview.com/u/Fractured/
#// study("SSL Hybrid")
### Converted by SAM4COK - 07/2022 ## 09/2022 Added THMA as requested by usethinkscript.com memeber.
input show_Baseline = yes;     #"Show Baseline"
input SSL1_Line     = no;      #"Show SSL1"
input SSL2_Line     = no;
input ATR_Bands     = no;     #"Show ATR bands"
input CandleMore_1xATR = no;
input SSL_Channel   = no;
input Show_Arrow    = no;
input Show_Cloud    = no;

#//ATR
input ATR_Period = 14;         #"ATR Period"
input ATR_mult   = 1;          #"ATR Multi"
input ATR_smoothing  = {default WMA, RMA, SMA, EMA};    #"ATR Smoothing"
#////BASELINE / SSL1 / SSL2 / EXIT MOVING AVERAGE VALUES
input ssl1_BaselineType  = {"SMA", "EMA", "DEMA", "TEMA", "LSMA", "WMA", "MF", "VAMA", "TMA", default "HMA", "THMA", "JMA", "Kijun_v2", "EDSMA", "McGinley"};    #"SSL1 / Baseline Type"
input SSL1_Length = 60;                     #"SSL1 / Baseline Length"
input SSL2ContinuType = {"SMA", "EMA", "DEMA", "TEMA", "WMA", "MF", "VAMA", "TMA", "THMA", "HMA", default "JMA", "McGinley"};
input SSL2_Length = 5;                     #"SSL 2 Length"
input ExitType = {"DEMA", "TEMA", "LSMA", "VAMA", "TMA", default "HMA", "THMA", "JMA", "Kijun v2", "McGinley", "MF"}; #"EXIT Type"
input EXIT_Length = 15;      #"EXIT Length"
input src = close;
########
input Kijun_MOD_Divider = 1;     #"Kijun MOD Divider"
input jurik_phase = 3;           #"* Jurik (JMA) Only - Phase"
input jurik_power = 1;           #"* Jurik (JMA) Only - Power"
input volatility_lookback = 10;  #"* Volatility Adjusted (VAMA) Only - Volatility lookback length"
input FilterBeta = 0.8;          #"Modular Filter, General Filter Only - Beta"
input FilterFeedback = no ;      #"Modular Filter Only - Feedback"
input FeedbackWeighting = 0.5;   #"Modular Filter Only - Feedback Weighting"
#//EDSMA
input EDSMaLength = 20;                 #"EDSMA - Super Smoother Filter Length"
input EDSMaPoles  = {default "2", "3"}; #"EDSMA - Super Smoother Filter Poles"

input useTrueRange   = yes;
input Channel_Mult   = 0.2;        #"Base Channel Multiplier"
input Continu_ATR    = 0.9;        #"Continuation ATR Criteria"
input show_color_bar = no;
input sound          = {"Ding", "Bell", "Chimes",default "NoSound", "Ring"};

def na = Double.NaN;
def tr = TrueRange (high, close, low);
####################    COLORS    ################################
DefineGlobalColor("lowerk", CreateColor(255, 0, 98));   # red
DefineGlobalColor("upperk", CreateColor(0, 195, 255));  # blue
DefineGlobalColor("upbar",  CreateColor(38, 166, 154));   # green
DefineGlobalColor("dnbar",  CreateColor(239, 83, 80));    # red
##################################################################

def ma_function;
switch (ATR_smoothing) {
case SMA:
    ma_function = SimpleMovingAvg(tr, ATR_Period);
case EMA:
    ma_function = ExpAverage(tr, ATR_Period);
case WMA:
    ma_function = WMA(tr, ATR_Period);
case RMA:
    ma_function = WildersAverage(tr, ATR_Period);
}
#atr_slen = ma_function(tr(true), atrlen)
def atr_slen = ma_function;
#////ATR Up/Low Bands
def upper_band = atr_slen * ATR_mult + close;
def lower_band = close - atr_slen * ATR_mult;

############ Scripts###############
script nz {
    input data = 0;
    input replacement  = 0;
    def ret_val = if IsNaN(data) then replacement else data;
    plot return = ret_val;
}

#get2PoleSSF(src, length) =>
script get2PoleSSF {
    input src = close;
    input length = 0;
    def PI = 2 * ASin(1);
    def arg = Sqrt(2) * PI / length;
    def a1 = Exp(-arg);
    def b1 = 2 * a1 * Cos(arg);
    def c2 = b1;
    def c3 = -Power(a1, 2);
    def c1 = 1 - c2 - c3;
    def ssf = c1 * src + c2 * nz(ssf[1]) + c3 * nz(ssf[2]);
    plot return = ssf;
}
#get3PoleSSF(src, length) =>
script get3PoleSSF {
    input src = close;
    input length = 0;
    def PI = 2 * ASin(1);
    def arg = PI / length;
    def a1 = Exp(-arg);
    def b1 = 2 * a1 * Cos(1.738 * arg);
    def c1 = Power(a1, 2);
    def coef2 = b1 + c1;
    def coef3 = -(c1 + b1 * c1);
    def coef4 = Power(c1, 2);
    def coef1 = 1 - coef2 - coef3 - coef4;
    def ssf = coef1 * src + coef2 * nz(ssf[1]) + coef3 * nz(ssf[2]) + coef4 * nz(ssf[3]);
    plot Return = ssf;
}
###
#tema(src, len) =>
script TEMA {
    input src = close;
    input len = 0;
    def ema1 = ExpAverage(src, len);
    def ema2 = ExpAverage(ema1, len);
    def ema3 = ExpAverage(ema2, len);
    def tema = (3 * ema1) - (3 * ema2) + ema3;
    plot return = tema;
}
#THMA(_src, _length) =>
script THMA {
    input _src = close;
    input _length = 0;
    def THMA = WMA(WMA(_src, _length / 3) * 3 - WMA(_src, _length / 2) - WMA(_src, _length), _length);
    plot return = THMA;
}
#DEMA(src, len) =>
script DEMA {
    input src = close;
    input len = 0;
    def e    = ExpAverage(src, len);
    def DEMA = 2 * e - ExpAverage(e, len);
    plot result = DEMA;
}
#VAMA(src, len, volatility_lookback) =>
script VAMA {
    input src = close;
    input len = 0;
    input volatility_lookback = 10;
    def mid;
    def dev;
    def vol_up;
    def vol_down;
    mid = ExpAverage(src, len);
    dev = src - mid;
    vol_up = Highest(dev, volatility_lookback);
    vol_down = Lowest(dev, volatility_lookback);
    def VAMA = mid + (vol_up + vol_down) / 2;
    plot result = VAMA;
}
#mf(src, len, z, beta, feedback)
script MF {
    input src = close;
    input len = 0;
    input z = 0;
    input beta = 0.8;
    input feedback = no;
    def ts;
    def alpha = 2 / (len + 1);
    def a = if feedback then z * src + (1 - z) * nz(ts[1], src) else src;
    def b = if a > alpha * a + (1 - alpha) * nz(b[1], a) then a else alpha * a + (1 - alpha) * nz(b[1], a);
    def c = if a < alpha * a + (1 - alpha) * nz(c[1], a) then a else alpha * a + (1 - alpha) * nz(c[1], a);
    def os = if a == b then 1 else if a == c then 0 else os[1];
    def upper = beta * b + (1 - beta) * c;
    def lower = beta * c + (1 - beta) * b;
    ts = os * upper + (1 - os) * lower;
    plot result = ts;
}
#JMA(src, len, jurik_phase, jurik_power)
script JMA {
    input src = close;
    input len = 0;
    input jurik_phase = 3;
    input jurik_power = 1;
    def jma;
    def phaseRatio = if jurik_phase < -100 then 0.5 else
                     if jurik_phase >  100 then 2.5 else jurik_phase / 100 + 1.5;
    def beta = 0.45 * (len - 1) / (0.45 * (len - 1) + 2);
    def alpha = Power(beta, jurik_power);
    def e0 = (1 - alpha) * src + alpha * nz(e0[1]);
    def e1 = (src - e0) * (1 - beta) + beta * nz(e1[1]);
    def e2 = (e0 + phaseRatio * e1 - nz(jma[1])) * Power(1 - alpha, 2) + Power(alpha, 2) * nz(e2[1]);
    jma  = e2 + nz(jma[1]);
    plot result = jma;
}
#Kijun_v2(src, len, kidiv)
script Kijun_v2 {
    input src = close;
    input len = 0;
    input kidiv = 1;
    def kijun = (Lowest(src, len) + Highest(src, len)) / 2;
    def conversionLine = (Lowest(src, len / kidiv) + Highest(src, len / kidiv)) / 2;
    def delta = (kijun + conversionLine) / 2;
    plot result = delta;
}
#McGinley(src, len)
script mg {
    input src = close;
    input len = 0;
#    def McGinley = McGinley[1] + (src - McGinley[1]) / (len * Power(src / McGinley[1], 4));
#    def MDI = ExpAverage(src, len)[1];
    def Mcg = if IsNaN(Mcg[1]) then ExpAverage(src, len) else
  CompoundValue(1, Mcg[1] + ((src - Mcg[1]) / (len * Power(src / Mcg[1], 4))), src);
#    def mg = if IsNaN(MDI) then ExpAverage(src, len) else
#                 MDI[1] + (src - MDI[1]) / (len * Power(src / MDI[1], 4));
    plot result = Mcg;
}
#EDSMA(src, len,ssfLength, ssfPoles)
script EDSMA {
    input src = close;
    input len = 0;
    input ssfLength = 20;
    input ssfPoles = 2;
    def zeros = src - nz(src[2]);
    def avgZeros = (zeros + zeros[1]) / 2;
    def ssf = if ssfPoles == 2 then get2PoleSSF(avgZeros, ssfLength) else
                                    get3PoleSSF(avgZeros, ssfLength);     
    def stdev = StDev(ssf, len);
    def scaledFilter = if stdev != 0 then ssf / stdev else 0;
    def alpha = 5 * AbsValue(scaledFilter) / len;
    def edsma = alpha * src + (1 - alpha) * nz(edsma[1]);
    plot result =  edsma;
}
#mama(type, src, len, z, beta, feedback, jurik_phase, jurik_power, kidiv, ssfLength, ssfPoles, volatility_lookback)
script ma {
    input type = "SMA";
    input src  = close;
    input len = 0;
    input z = 0.5;
    input beta = 0.8;
    input feedback = no;
    input jurik_phase = 3;
    input jurik_power = 1;
    input kidiv = 1;
    input ssfLength = 20;
    input ssfPoles = 2;
    input volatility_lookback = 10;
    def  ma = if type == "TMA" then 
            SimpleMovingAvg(SimpleMovingAvg(src, Ceil(len / 2)), Floor(len / 2) + 1) else
        if type == "MF" then
            mf(src, len, z, beta, feedback) else
        if type == "THMA" then
           THMA(src, len) else
        if type == "LSMA" then
            Inertia(src, len) else
        if type == "SMA" then
            SimpleMovingAvg(src, len) else
        if type == "EMA" then
            ExpAverage(src, len) else
        if type == "DEMA" then
           DEMA(src, len) else
        if type == "TEMA" then
           TEMA(src, len) else
        if type == "WMA" then
           WMA(src, len) else
        if type == "VAMA" then
           VAMA(src, len, volatility_lookback) else
        if type == "HMA" then
           WMA(2 * WMA(src, len / 2) - WMA(src, len), Round(Sqrt(len))) else
        if type == "JMA" then
          JMA(src, len, jurik_phase, jurik_power) else
        if type == "Kijun_v2" then
          Kijun_v2(src, len, kidiv) else
        if type == "McGinley" then
          mg(src, len) else
          EDSMA(src, len, ssfLength, ssfPoles);
    plot result = ma;
} 
#///SSL 1 and SSL2
#ma(type, src, len, z, beta, feedback, jurik_phase, jurik_power, kidiv, ssfLength, ssfPoles, volatility_lookback)
def emaHigh = ma(type = ssl1_BaselineType, src = high, len = SSL1_Length, z = FeedbackWeighting, beta = FilterBeta, feedback = FilterFeedback, jurik_phase = jurik_phase, jurik_power = jurik_power, kidiv = Kijun_MOD_Divider, ssfLength = EDSMaLength, ssfPoles = EDSMaPoles, volatility_lookback = volatility_lookback);

def emaLow = ma(type = ssl1_BaselineType, src = low, len = SSL1_Length, z = FeedbackWeighting, beta = FilterBeta, feedback = FilterFeedback, jurik_phase = jurik_phase, jurik_power = jurik_power, kidiv = Kijun_MOD_Divider, ssfLength = EDSMaLength, ssfPoles = EDSMaPoles, volatility_lookback = volatility_lookback);

def maHigh = ma(type = SSL2ContinuType, src = high, len = SSL2_Length, z = FeedbackWeighting, beta = FilterBeta, feedback = FilterFeedback, jurik_phase = jurik_phase, jurik_power = jurik_power, kidiv = Kijun_MOD_Divider, ssfLength = EDSMaLength, ssfPoles = EDSMaPoles, volatility_lookback = volatility_lookback);

def maLow = ma(type = SSL2ContinuType, src = low, len = SSL2_Length, z = FeedbackWeighting, beta = FilterBeta, feedback = FilterFeedback, jurik_phase = jurik_phase, jurik_power = jurik_power, kidiv = Kijun_MOD_Divider, ssfLength = EDSMaLength, ssfPoles = EDSMaPoles, volatility_lookback = volatility_lookback);

#///EXIT
def ExitHigh = ma(type = ExitType, src = high, len = EXIT_Length, z = FeedbackWeighting, beta = FilterBeta, feedback = FilterFeedback, jurik_phase = jurik_phase, jurik_power = jurik_power, kidiv = Kijun_MOD_Divider, ssfLength = EDSMaLength, ssfPoles = EDSMaPoles, volatility_lookback = volatility_lookback);

def ExitLow = ma(type = ExitType, src = low, len = EXIT_Length, z = FeedbackWeighting, beta = FilterBeta, feedback = FilterFeedback, jurik_phase = jurik_phase, jurik_power = jurik_power, kidiv = Kijun_MOD_Divider, ssfLength = EDSMaLength, ssfPoles = EDSMaPoles, volatility_lookback = volatility_lookback);

#///Keltner Baseline Channel
def BBMC = ma(type = ssl1_BaselineType, src = close, len = SSL1_Length, z = FeedbackWeighting, beta = FilterBeta, feedback = FilterFeedback, jurik_phase = jurik_phase, jurik_power = jurik_power, kidiv = Kijun_MOD_Divider, ssfLength = EDSMaLength, ssfPoles = EDSMaPoles, volatility_lookback = volatility_lookback);

def Keltma = ma(type = ssl1_BaselineType, src = src, len = SSL1_Length, z = FeedbackWeighting, beta = FilterBeta, feedback = FilterFeedback, jurik_phase = jurik_phase, jurik_power = jurik_power, kidiv = Kijun_MOD_Divider, ssfLength = EDSMaLength, ssfPoles = EDSMaPoles, volatility_lookback = volatility_lookback);
def range = if useTrueRange then tr else high - low;
def rangema = ExpAverage(range, SSL1_Length);
def upperk = Keltma + rangema * Channel_Mult;
def lowerk = Keltma - rangema * Channel_Mult;

#//Baseline Violation Candle
def open_pos =  open;
def close_pos = close;
def difference = AbsValue(close - open);
def atr_violation = difference > atr_slen;
def InRange = upper_band > BBMC and lower_band < BBMC;
def candlesize_violation = atr_violation and InRange;

plot candlesize = if CandleMore_1xATR then if candlesize_violation then high else na else na; #"Candle Size > 1xATR"
candlesize.SetDefaultColor(Color.YELLOW);
candlesize.SetPaintingStrategy(PaintingStrategy.TRIANGLES);
candlesize.SetLineWeight(3);

#//SSL1 VALUES
def Hlv = if close > emaHigh then 1 else if close < emaLow then -1 else Hlv[1];
def sslDown = if Hlv < 0 then emaHigh else emaLow;

#//SSL2 VALUES
def Hlv2 = if close > maHigh then 1 else if close < maLow then -1 else Hlv2[1];
def sslDown2 = if Hlv2 < 0 then maHigh else maLow;

#//EXIT VALUES
def Hlv3 = if close > ExitHigh then 1 else if close < ExitLow then -1 else Hlv3[1];
def sslExit = if Hlv3 < 0 then ExitHigh else ExitLow;
def base_cross_Long  = close crosses above sslExit;
def base_cross_Short = sslExit crosses above close;
def codiff = if base_cross_Long then 1 else if base_cross_Short then -1 else na;

#//COLORS
AssignPriceColor( if show_color_bar then if close > upperk then GlobalColor("upbar")
                                    else if close < lowerk then GlobalColor("dnbar")
                                    else Color.GRAY else Color.CURRENT);
#//PLOTS
plot ArUp = if Show_Arrow and codiff > 0 then low else na;
plot ArDN = if Show_Arrow and codiff < 0 then high else na;

ArUp.SetPaintingStrategy(PaintingStrategy.ARROW_UP);
ArUp.SetDefaultColor(GlobalColor("upperk"));
ArUp.SetLineWeight(2);

ArDN.SetPaintingStrategy(PaintingStrategy.ARROW_DOWN);
ArDN.SetDefaultColor(GlobalColor("lowerk"));
ArDN.SetLineWeight(2);

def color_bar = if close > upperk then 1 else if close < lowerk then -1 else 0;

plot p1 = if show_Baseline then BBMC else na; #MA Baseline
p1.SetStyle(Curve.FIRM);
p1.AssignValueColor(if color_bar > 0 then GlobalColor("upperk") else
                    if color_bar < 0 then GlobalColor("lowerk") else Color.GRAY);
p1.SetLineWeight(4);

plot DownPlot = if SSL1_Line then sslDown else na; #"SSL1"
DownPlot.SetStyle(Curve.FIRM);
DownPlot.AssignValueColor(if close > sslDown then GlobalColor("upperk") else
                          if close < sslDown then GlobalColor("lowerk") else Color.CURRENT);
DownPlot.SetLineWeight(3);

plot up_channel  = if SSL_Channel then upperk else na; #"Baseline Upper Channel")
up_channel.SetStyle(Curve.FIRM);
up_channel.AssignValueColor(if color_bar > 0 then GlobalColor("upperk") else
                            if color_bar < 0 then GlobalColor("lowerk") else Color.GRAY);
up_channel.SetLineWeight(1);

plot low_channel = if SSL_Channel then lowerk else na; #"Basiline Lower Channel")
low_channel.SetStyle(Curve.FIRM);
low_channel.AssignValueColor(if color_bar > 0 then GlobalColor("upperk") else
                             if color_bar < 0 then GlobalColor("lowerk") else Color.GRAY);
low_channel.SetLineWeight(1);

AddCloud (if Show_Cloud and color_bar  > 0 then upperk else na, lowerk, GlobalColor("upperk"));
AddCloud (if Show_Cloud and color_bar  < 0 then upperk else na, lowerk, GlobalColor("lowerk"));
AddCloud (if Show_Cloud and !color_bar then upperk else na, lowerk, Color.GRAY);

#////SSL2 Continiuation from ATR
def upper_half = atr_slen * Continu_ATR + close;
def lower_half = close - atr_slen * Continu_ATR;
def buy_inatr =  lower_half < sslDown2;
def sell_inatr = upper_half > sslDown2;
def sell_cont = close < BBMC and close < sslDown2;
def buy_cont = close > BBMC and close > sslDown2;
def sell_atr = sell_inatr and sell_cont;
def buy_atr = buy_inatr and buy_cont;
def atr_fill = if buy_atr then 1 else if sell_atr then -1 else 0;

plot LongPlot = if SSL2_Line then sslDown2 else na;
LongPlot.SetPaintingStrategy(PaintingStrategy.LINE_VS_POINTS);
LongPlot.AssignValueColor(if atr_fill > 0 then Color.GREEN else
                          if atr_fill < 0 then Color.MAGENTA else Color.WHITE);
LongPlot.SetLineWeight(1);

plot u = if ATR_Bands then upper_band else na; # "+ATR", color=color.white, transp=80)
u.SetDefaultColor(Color.GRAY);
plot l = if ATR_Bands then lower_band else na; # "-ATR", color=color.white, transp=80)
l.SetDefaultColor(Color.GRAY);

#//ALERTS
alert(close crosses above sslDown,  "SSL1 has crossed", Alert.Bar, sound);
alert(close crosses below sslDown2, "SSL2 has crossed", Alert.Bar, sound);
alert(sell_atr, "Sell Continuation", Alert.Bar, sound);
alert(buy_atr,  "Buy Continuation", Alert.Bar, sound);
alert(close crosses above sslExit, "Exit Sell Alert", Alert.Bar, sound);
alert(sslExit crosses below close, "Exit Buy Alert", Alert.Bar, sound);
alert(close crosses above upperk,  "Base Buy Alert", Alert.Bar, sound);
alert(lowerk crosses below close,  "Base Sell Alert", Alert.Bar, sound);

#####END #########
 
added as requested.

CSS:
#//By Mihkel00
#// This script is designed for the NNFX Method, so it is recommended for Daily charts only.
#// This script has a SSL / Baseline (you can choose between the SSL or MA), a secondary SSL for continiuation #trades and a third SSL for exit trades.
#// Alerts added for Baseline entries, SSL2 continuations, Exits.
#// Baseline has a Keltner Channel setting for "in zone" Gray Candles
#// Added "Candle Size > 1 ATR" Diamonds from my old script with the criteria of being within Baseline ATR range.
#// Strategy causecelebre https://www.tradingview.com/u/causecelebre/
#// SSL Channel ErwinBeckers https://www.tradingview.com/u/ErwinBeckers/
#// Moving Averages jiehonglim https://www.tradingview.com/u/jiehonglim/
#// Moving Averages  everget https://www.tradingview.com/u/everget/
#// "Many Moving Averages" script  Fractured https://www.tradingview.com/u/Fractured/
#// study("SSL Hybrid")
### Converted by SAM4COK - 07/2022 ## 09/2022 Added THMA as requested by usethinkscript.com memeber.
input show_Baseline = yes;     #"Show Baseline"
input SSL1_Line     = no;      #"Show SSL1"
input SSL2_Line     = no;
input ATR_Bands     = no;     #"Show ATR bands"
input CandleMore_1xATR = no;
input SSL_Channel   = no;
input Show_Arrow    = no;
input Show_Cloud    = no;

#//ATR
input ATR_Period = 14;         #"ATR Period"
input ATR_mult   = 1;          #"ATR Multi"
input ATR_smoothing  = {default WMA, RMA, SMA, EMA};    #"ATR Smoothing"
#////BASELINE / SSL1 / SSL2 / EXIT MOVING AVERAGE VALUES
input ssl1_BaselineType  = {"SMA", "EMA", "DEMA", "TEMA", "LSMA", "WMA", "MF", "VAMA", "TMA", default "HMA", "THMA", "JMA", "Kijun_v2", "EDSMA", "McGinley"};    #"SSL1 / Baseline Type"
input SSL1_Length = 60;                     #"SSL1 / Baseline Length"
input SSL2ContinuType = {"SMA", "EMA", "DEMA", "TEMA", "WMA", "MF", "VAMA", "TMA", "THMA", "HMA", default "JMA", "McGinley"};
input SSL2_Length = 5;                     #"SSL 2 Length"
input ExitType = {"DEMA", "TEMA", "LSMA", "VAMA", "TMA", default "HMA", "THMA", "JMA", "Kijun v2", "McGinley", "MF"}; #"EXIT Type"
input EXIT_Length = 15;      #"EXIT Length"
input src = close;
########
input Kijun_MOD_Divider = 1;     #"Kijun MOD Divider"
input jurik_phase = 3;           #"* Jurik (JMA) Only - Phase"
input jurik_power = 1;           #"* Jurik (JMA) Only - Power"
input volatility_lookback = 10;  #"* Volatility Adjusted (VAMA) Only - Volatility lookback length"
input FilterBeta = 0.8;          #"Modular Filter, General Filter Only - Beta"
input FilterFeedback = no ;      #"Modular Filter Only - Feedback"
input FeedbackWeighting = 0.5;   #"Modular Filter Only - Feedback Weighting"
#//EDSMA
input EDSMaLength = 20;                 #"EDSMA - Super Smoother Filter Length"
input EDSMaPoles  = {default "2", "3"}; #"EDSMA - Super Smoother Filter Poles"

input useTrueRange   = yes;
input Channel_Mult   = 0.2;        #"Base Channel Multiplier"
input Continu_ATR    = 0.9;        #"Continuation ATR Criteria"
input show_color_bar = no;
input sound          = {"Ding", "Bell", "Chimes",default "NoSound", "Ring"};

def na = Double.NaN;
def tr = TrueRange (high, close, low);
####################    COLORS    ################################
DefineGlobalColor("lowerk", CreateColor(255, 0, 98));   # red
DefineGlobalColor("upperk", CreateColor(0, 195, 255));  # blue
DefineGlobalColor("upbar",  CreateColor(38, 166, 154));   # green
DefineGlobalColor("dnbar",  CreateColor(239, 83, 80));    # red
##################################################################

def ma_function;
switch (ATR_smoothing) {
case SMA:
    ma_function = SimpleMovingAvg(tr, ATR_Period);
case EMA:
    ma_function = ExpAverage(tr, ATR_Period);
case WMA:
    ma_function = WMA(tr, ATR_Period);
case RMA:
    ma_function = WildersAverage(tr, ATR_Period);
}
#atr_slen = ma_function(tr(true), atrlen)
def atr_slen = ma_function;
#////ATR Up/Low Bands
def upper_band = atr_slen * ATR_mult + close;
def lower_band = close - atr_slen * ATR_mult;

############ Scripts###############
script nz {
    input data = 0;
    input replacement  = 0;
    def ret_val = if IsNaN(data) then replacement else data;
    plot return = ret_val;
}

#get2PoleSSF(src, length) =>
script get2PoleSSF {
    input src = close;
    input length = 0;
    def PI = 2 * ASin(1);
    def arg = Sqrt(2) * PI / length;
    def a1 = Exp(-arg);
    def b1 = 2 * a1 * Cos(arg);
    def c2 = b1;
    def c3 = -Power(a1, 2);
    def c1 = 1 - c2 - c3;
    def ssf = c1 * src + c2 * nz(ssf[1]) + c3 * nz(ssf[2]);
    plot return = ssf;
}
#get3PoleSSF(src, length) =>
script get3PoleSSF {
    input src = close;
    input length = 0;
    def PI = 2 * ASin(1);
    def arg = PI / length;
    def a1 = Exp(-arg);
    def b1 = 2 * a1 * Cos(1.738 * arg);
    def c1 = Power(a1, 2);
    def coef2 = b1 + c1;
    def coef3 = -(c1 + b1 * c1);
    def coef4 = Power(c1, 2);
    def coef1 = 1 - coef2 - coef3 - coef4;
    def ssf = coef1 * src + coef2 * nz(ssf[1]) + coef3 * nz(ssf[2]) + coef4 * nz(ssf[3]);
    plot Return = ssf;
}
###
#tema(src, len) =>
script TEMA {
    input src = close;
    input len = 0;
    def ema1 = ExpAverage(src, len);
    def ema2 = ExpAverage(ema1, len);
    def ema3 = ExpAverage(ema2, len);
    def tema = (3 * ema1) - (3 * ema2) + ema3;
    plot return = tema;
}
#THMA(_src, _length) =>
script THMA {
    input _src = close;
    input _length = 0;
    def THMA = WMA(WMA(_src, _length / 3) * 3 - WMA(_src, _length / 2) - WMA(_src, _length), _length);
    plot return = THMA;
}
#DEMA(src, len) =>
script DEMA {
    input src = close;
    input len = 0;
    def e    = ExpAverage(src, len);
    def DEMA = 2 * e - ExpAverage(e, len);
    plot result = DEMA;
}
#VAMA(src, len, volatility_lookback) =>
script VAMA {
    input src = close;
    input len = 0;
    input volatility_lookback = 10;
    def mid;
    def dev;
    def vol_up;
    def vol_down;
    mid = ExpAverage(src, len);
    dev = src - mid;
    vol_up = Highest(dev, volatility_lookback);
    vol_down = Lowest(dev, volatility_lookback);
    def VAMA = mid + (vol_up + vol_down) / 2;
    plot result = VAMA;
}
#mf(src, len, z, beta, feedback)
script MF {
    input src = close;
    input len = 0;
    input z = 0;
    input beta = 0.8;
    input feedback = no;
    def ts;
    def alpha = 2 / (len + 1);
    def a = if feedback then z * src + (1 - z) * nz(ts[1], src) else src;
    def b = if a > alpha * a + (1 - alpha) * nz(b[1], a) then a else alpha * a + (1 - alpha) * nz(b[1], a);
    def c = if a < alpha * a + (1 - alpha) * nz(c[1], a) then a else alpha * a + (1 - alpha) * nz(c[1], a);
    def os = if a == b then 1 else if a == c then 0 else os[1];
    def upper = beta * b + (1 - beta) * c;
    def lower = beta * c + (1 - beta) * b;
    ts = os * upper + (1 - os) * lower;
    plot result = ts;
}
#JMA(src, len, jurik_phase, jurik_power)
script JMA {
    input src = close;
    input len = 0;
    input jurik_phase = 3;
    input jurik_power = 1;
    def jma;
    def phaseRatio = if jurik_phase < -100 then 0.5 else
                     if jurik_phase >  100 then 2.5 else jurik_phase / 100 + 1.5;
    def beta = 0.45 * (len - 1) / (0.45 * (len - 1) + 2);
    def alpha = Power(beta, jurik_power);
    def e0 = (1 - alpha) * src + alpha * nz(e0[1]);
    def e1 = (src - e0) * (1 - beta) + beta * nz(e1[1]);
    def e2 = (e0 + phaseRatio * e1 - nz(jma[1])) * Power(1 - alpha, 2) + Power(alpha, 2) * nz(e2[1]);
    jma  = e2 + nz(jma[1]);
    plot result = jma;
}
#Kijun_v2(src, len, kidiv)
script Kijun_v2 {
    input src = close;
    input len = 0;
    input kidiv = 1;
    def kijun = (Lowest(src, len) + Highest(src, len)) / 2;
    def conversionLine = (Lowest(src, len / kidiv) + Highest(src, len / kidiv)) / 2;
    def delta = (kijun + conversionLine) / 2;
    plot result = delta;
}
#McGinley(src, len)
script mg {
    input src = close;
    input len = 0;
#    def McGinley = McGinley[1] + (src - McGinley[1]) / (len * Power(src / McGinley[1], 4));
#    def MDI = ExpAverage(src, len)[1];
    def Mcg = if IsNaN(Mcg[1]) then ExpAverage(src, len) else
  CompoundValue(1, Mcg[1] + ((src - Mcg[1]) / (len * Power(src / Mcg[1], 4))), src);
#    def mg = if IsNaN(MDI) then ExpAverage(src, len) else
#                 MDI[1] + (src - MDI[1]) / (len * Power(src / MDI[1], 4));
    plot result = Mcg;
}
#EDSMA(src, len,ssfLength, ssfPoles)
script EDSMA {
    input src = close;
    input len = 0;
    input ssfLength = 20;
    input ssfPoles = 2;
    def zeros = src - nz(src[2]);
    def avgZeros = (zeros + zeros[1]) / 2;
    def ssf = if ssfPoles == 2 then get2PoleSSF(avgZeros, ssfLength) else
                                    get3PoleSSF(avgZeros, ssfLength);    
    def stdev = StDev(ssf, len);
    def scaledFilter = if stdev != 0 then ssf / stdev else 0;
    def alpha = 5 * AbsValue(scaledFilter) / len;
    def edsma = alpha * src + (1 - alpha) * nz(edsma[1]);
    plot result =  edsma;
}
#mama(type, src, len, z, beta, feedback, jurik_phase, jurik_power, kidiv, ssfLength, ssfPoles, volatility_lookback)
script ma {
    input type = "SMA";
    input src  = close;
    input len = 0;
    input z = 0.5;
    input beta = 0.8;
    input feedback = no;
    input jurik_phase = 3;
    input jurik_power = 1;
    input kidiv = 1;
    input ssfLength = 20;
    input ssfPoles = 2;
    input volatility_lookback = 10;
    def  ma = if type == "TMA" then
            SimpleMovingAvg(SimpleMovingAvg(src, Ceil(len / 2)), Floor(len / 2) + 1) else
        if type == "MF" then
            mf(src, len, z, beta, feedback) else
        if type == "THMA" then
           THMA(src, len) else
        if type == "LSMA" then
            Inertia(src, len) else
        if type == "SMA" then
            SimpleMovingAvg(src, len) else
        if type == "EMA" then
            ExpAverage(src, len) else
        if type == "DEMA" then
           DEMA(src, len) else
        if type == "TEMA" then
           TEMA(src, len) else
        if type == "WMA" then
           WMA(src, len) else
        if type == "VAMA" then
           VAMA(src, len, volatility_lookback) else
        if type == "HMA" then
           WMA(2 * WMA(src, len / 2) - WMA(src, len), Round(Sqrt(len))) else
        if type == "JMA" then
          JMA(src, len, jurik_phase, jurik_power) else
        if type == "Kijun_v2" then
          Kijun_v2(src, len, kidiv) else
        if type == "McGinley" then
          mg(src, len) else
          EDSMA(src, len, ssfLength, ssfPoles);
    plot result = ma;
}
#///SSL 1 and SSL2
#ma(type, src, len, z, beta, feedback, jurik_phase, jurik_power, kidiv, ssfLength, ssfPoles, volatility_lookback)
def emaHigh = ma(type = ssl1_BaselineType, src = high, len = SSL1_Length, z = FeedbackWeighting, beta = FilterBeta, feedback = FilterFeedback, jurik_phase = jurik_phase, jurik_power = jurik_power, kidiv = Kijun_MOD_Divider, ssfLength = EDSMaLength, ssfPoles = EDSMaPoles, volatility_lookback = volatility_lookback);

def emaLow = ma(type = ssl1_BaselineType, src = low, len = SSL1_Length, z = FeedbackWeighting, beta = FilterBeta, feedback = FilterFeedback, jurik_phase = jurik_phase, jurik_power = jurik_power, kidiv = Kijun_MOD_Divider, ssfLength = EDSMaLength, ssfPoles = EDSMaPoles, volatility_lookback = volatility_lookback);

def maHigh = ma(type = SSL2ContinuType, src = high, len = SSL2_Length, z = FeedbackWeighting, beta = FilterBeta, feedback = FilterFeedback, jurik_phase = jurik_phase, jurik_power = jurik_power, kidiv = Kijun_MOD_Divider, ssfLength = EDSMaLength, ssfPoles = EDSMaPoles, volatility_lookback = volatility_lookback);

def maLow = ma(type = SSL2ContinuType, src = low, len = SSL2_Length, z = FeedbackWeighting, beta = FilterBeta, feedback = FilterFeedback, jurik_phase = jurik_phase, jurik_power = jurik_power, kidiv = Kijun_MOD_Divider, ssfLength = EDSMaLength, ssfPoles = EDSMaPoles, volatility_lookback = volatility_lookback);

#///EXIT
def ExitHigh = ma(type = ExitType, src = high, len = EXIT_Length, z = FeedbackWeighting, beta = FilterBeta, feedback = FilterFeedback, jurik_phase = jurik_phase, jurik_power = jurik_power, kidiv = Kijun_MOD_Divider, ssfLength = EDSMaLength, ssfPoles = EDSMaPoles, volatility_lookback = volatility_lookback);

def ExitLow = ma(type = ExitType, src = low, len = EXIT_Length, z = FeedbackWeighting, beta = FilterBeta, feedback = FilterFeedback, jurik_phase = jurik_phase, jurik_power = jurik_power, kidiv = Kijun_MOD_Divider, ssfLength = EDSMaLength, ssfPoles = EDSMaPoles, volatility_lookback = volatility_lookback);

#///Keltner Baseline Channel
def BBMC = ma(type = ssl1_BaselineType, src = close, len = SSL1_Length, z = FeedbackWeighting, beta = FilterBeta, feedback = FilterFeedback, jurik_phase = jurik_phase, jurik_power = jurik_power, kidiv = Kijun_MOD_Divider, ssfLength = EDSMaLength, ssfPoles = EDSMaPoles, volatility_lookback = volatility_lookback);

def Keltma = ma(type = ssl1_BaselineType, src = src, len = SSL1_Length, z = FeedbackWeighting, beta = FilterBeta, feedback = FilterFeedback, jurik_phase = jurik_phase, jurik_power = jurik_power, kidiv = Kijun_MOD_Divider, ssfLength = EDSMaLength, ssfPoles = EDSMaPoles, volatility_lookback = volatility_lookback);
def range = if useTrueRange then tr else high - low;
def rangema = ExpAverage(range, SSL1_Length);
def upperk = Keltma + rangema * Channel_Mult;
def lowerk = Keltma - rangema * Channel_Mult;

#//Baseline Violation Candle
def open_pos =  open;
def close_pos = close;
def difference = AbsValue(close - open);
def atr_violation = difference > atr_slen;
def InRange = upper_band > BBMC and lower_band < BBMC;
def candlesize_violation = atr_violation and InRange;

plot candlesize = if CandleMore_1xATR then if candlesize_violation then high else na else na; #"Candle Size > 1xATR"
candlesize.SetDefaultColor(Color.YELLOW);
candlesize.SetPaintingStrategy(PaintingStrategy.TRIANGLES);
candlesize.SetLineWeight(3);

#//SSL1 VALUES
def Hlv = if close > emaHigh then 1 else if close < emaLow then -1 else Hlv[1];
def sslDown = if Hlv < 0 then emaHigh else emaLow;

#//SSL2 VALUES
def Hlv2 = if close > maHigh then 1 else if close < maLow then -1 else Hlv2[1];
def sslDown2 = if Hlv2 < 0 then maHigh else maLow;

#//EXIT VALUES
def Hlv3 = if close > ExitHigh then 1 else if close < ExitLow then -1 else Hlv3[1];
def sslExit = if Hlv3 < 0 then ExitHigh else ExitLow;
def base_cross_Long  = close crosses above sslExit;
def base_cross_Short = sslExit crosses above close;
def codiff = if base_cross_Long then 1 else if base_cross_Short then -1 else na;

#//COLORS
AssignPriceColor( if show_color_bar then if close > upperk then GlobalColor("upbar")
                                    else if close < lowerk then GlobalColor("dnbar")
                                    else Color.GRAY else Color.CURRENT);
#//PLOTS
plot ArUp = if Show_Arrow and codiff > 0 then low else na;
plot ArDN = if Show_Arrow and codiff < 0 then high else na;

ArUp.SetPaintingStrategy(PaintingStrategy.ARROW_UP);
ArUp.SetDefaultColor(GlobalColor("upperk"));
ArUp.SetLineWeight(2);

ArDN.SetPaintingStrategy(PaintingStrategy.ARROW_DOWN);
ArDN.SetDefaultColor(GlobalColor("lowerk"));
ArDN.SetLineWeight(2);

def color_bar = if close > upperk then 1 else if close < lowerk then -1 else 0;

plot p1 = if show_Baseline then BBMC else na; #MA Baseline
p1.SetStyle(Curve.FIRM);
p1.AssignValueColor(if color_bar > 0 then GlobalColor("upperk") else
                    if color_bar < 0 then GlobalColor("lowerk") else Color.GRAY);
p1.SetLineWeight(4);

plot DownPlot = if SSL1_Line then sslDown else na; #"SSL1"
DownPlot.SetStyle(Curve.FIRM);
DownPlot.AssignValueColor(if close > sslDown then GlobalColor("upperk") else
                          if close < sslDown then GlobalColor("lowerk") else Color.CURRENT);
DownPlot.SetLineWeight(3);

plot up_channel  = if SSL_Channel then upperk else na; #"Baseline Upper Channel")
up_channel.SetStyle(Curve.FIRM);
up_channel.AssignValueColor(if color_bar > 0 then GlobalColor("upperk") else
                            if color_bar < 0 then GlobalColor("lowerk") else Color.GRAY);
up_channel.SetLineWeight(1);

plot low_channel = if SSL_Channel then lowerk else na; #"Basiline Lower Channel")
low_channel.SetStyle(Curve.FIRM);
low_channel.AssignValueColor(if color_bar > 0 then GlobalColor("upperk") else
                             if color_bar < 0 then GlobalColor("lowerk") else Color.GRAY);
low_channel.SetLineWeight(1);

AddCloud (if Show_Cloud and color_bar  > 0 then upperk else na, lowerk, GlobalColor("upperk"));
AddCloud (if Show_Cloud and color_bar  < 0 then upperk else na, lowerk, GlobalColor("lowerk"));
AddCloud (if Show_Cloud and !color_bar then upperk else na, lowerk, Color.GRAY);

#////SSL2 Continiuation from ATR
def upper_half = atr_slen * Continu_ATR + close;
def lower_half = close - atr_slen * Continu_ATR;
def buy_inatr =  lower_half < sslDown2;
def sell_inatr = upper_half > sslDown2;
def sell_cont = close < BBMC and close < sslDown2;
def buy_cont = close > BBMC and close > sslDown2;
def sell_atr = sell_inatr and sell_cont;
def buy_atr = buy_inatr and buy_cont;
def atr_fill = if buy_atr then 1 else if sell_atr then -1 else 0;

plot LongPlot = if SSL2_Line then sslDown2 else na;
LongPlot.SetPaintingStrategy(PaintingStrategy.LINE_VS_POINTS);
LongPlot.AssignValueColor(if atr_fill > 0 then Color.GREEN else
                          if atr_fill < 0 then Color.MAGENTA else Color.WHITE);
LongPlot.SetLineWeight(1);

plot u = if ATR_Bands then upper_band else na; # "+ATR", color=color.white, transp=80)
u.SetDefaultColor(Color.GRAY);
plot l = if ATR_Bands then lower_band else na; # "-ATR", color=color.white, transp=80)
l.SetDefaultColor(Color.GRAY);

#//ALERTS
alert(close crosses above sslDown,  "SSL1 has crossed", Alert.Bar, sound);
alert(close crosses below sslDown2, "SSL2 has crossed", Alert.Bar, sound);
alert(sell_atr, "Sell Continuation", Alert.Bar, sound);
alert(buy_atr,  "Buy Continuation", Alert.Bar, sound);
alert(close crosses above sslExit, "Exit Sell Alert", Alert.Bar, sound);
alert(sslExit crosses below close, "Exit Buy Alert", Alert.Bar, sound);
alert(close crosses above upperk,  "Base Buy Alert", Alert.Bar, sound);
alert(lowerk crosses below close,  "Base Sell Alert", Alert.Bar, sound);

#####END #########
Thank you so much Samer, you're a rockstar 🤟
 
Appreciate @samer800 or anyone could provide a strategy to ENTER long when ssl turns blue and when there is Up color on the SMA as defined below:

and EXIT long when any one of the two change color.

On the opposite side ENTER short when ssl is red and down color on SMA and EXIT when any one of them changes color.

plot SMA = MovingAverage(AverageType.SIMPLE, price, length)[-displace];

SMA.DefineColor("Up", GetColor(1));
SMA.DefineColor("Down", GetColor(0));
SMA.AssignValueColor(if SMA > SMA[1] then SMA.color("Up") else SMA.color("Down"));
 
Last edited:
slowly learning how to code. I just tried to scan and it says "TooComplexException" "May not be reliable with real-time data"

Hmmm I didn't change anything. Is there no way around it?

For sure the script is too complex too scan for arrows. What about the SL1 Line is there a way to scan for when red switches to blue or when the blue line switches to red. I would be fine if the line switches to even grey. Just thinking of a simple way to be able to scan with it.

Is there anyway I can get a white circle when the baseline crosses from blue/grey/red
samer800[/USER] @MerryDay?

I'm using the second script by @samer800

Code:
#//By Mihkel00
#// This script is designed for the NNFX Method, so it is recommended for Daily charts only.
#// This script has a SSL / Baseline (you can choose between the SSL or MA), a secondary SSL for continiuation #trades and a third SSL for exit trades.
#// Alerts added for Baseline entries, SSL2 continuations, Exits.
#// Baseline has a Keltner Channel setting for "in zone" Gray Candles
#// Added "Candle Size > 1 ATR" Diamonds from my old script with the criteria of being within Baseline ATR range.
#// Strategy causecelebre https://www.tradingview.com/u/causecelebre/
#// SSL Channel ErwinBeckers https://www.tradingview.com/u/ErwinBeckers/
#// Moving Averages jiehonglim https://www.tradingview.com/u/jiehonglim/
#// Moving Averages  everget https://www.tradingview.com/u/everget/
#// "Many Moving Averages" script  Fractured https://www.tradingview.com/u/Fractured/
#// study("SSL Hybrid")
### Converted by SAM4COK - 07/2022 ## 09/2022 Added THMA as requested by usethinkscript.com memeber.
input show_Baseline = yes;     #"Show Baseline"
input SSL1_Line     = no;      #"Show SSL1"
input SSL2_Line     = no;
input ATR_Bands     = no;     #"Show ATR bands"
input CandleMore_1xATR = no;
input SSL_Channel   = no;
input Show_Arrow    = no;
input Show_Cloud    = no;

#//ATR
input ATR_Period = 14;         #"ATR Period"
input ATR_mult   = 1;          #"ATR Multi"
input ATR_smoothing  = {default WMA, RMA, SMA, EMA};    #"ATR Smoothing"
#////BASELINE / SSL1 / SSL2 / EXIT MOVING AVERAGE VALUES
input ssl1_BaselineType  = {"SMA", "EMA", "DEMA", "TEMA", "LSMA", "WMA", "MF", "VAMA", "TMA", default "HMA", "THMA", "JMA", "Kijun_v2", "EDSMA", "McGinley"};    #"SSL1 / Baseline Type"
input SSL1_Length = 60;                     #"SSL1 / Baseline Length"
input SSL2ContinuType = {"SMA", "EMA", "DEMA", "TEMA", "WMA", "MF", "VAMA", "TMA", "THMA", "HMA", default "JMA", "McGinley"};
input SSL2_Length = 5;                     #"SSL 2 Length"
input ExitType = {"DEMA", "TEMA", "LSMA", "VAMA", "TMA", default "HMA", "THMA", "JMA", "Kijun v2", "McGinley", "MF"}; #"EXIT Type"
input EXIT_Length = 15;      #"EXIT Length"
input src = close;
########
input Kijun_MOD_Divider = 1;     #"Kijun MOD Divider"
input jurik_phase = 3;           #"* Jurik (JMA) Only - Phase"
input jurik_power = 1;           #"* Jurik (JMA) Only - Power"
input volatility_lookback = 10;  #"* Volatility Adjusted (VAMA) Only - Volatility lookback length"
input FilterBeta = 0.8;          #"Modular Filter, General Filter Only - Beta"
input FilterFeedback = no ;      #"Modular Filter Only - Feedback"
input FeedbackWeighting = 0.5;   #"Modular Filter Only - Feedback Weighting"
#//EDSMA
input EDSMaLength = 20;                 #"EDSMA - Super Smoother Filter Length"
input EDSMaPoles  = {default "2", "3"}; #"EDSMA - Super Smoother Filter Poles"

input useTrueRange   = yes;
input Channel_Mult   = 0.2;        #"Base Channel Multiplier"
input Continu_ATR    = 0.9;        #"Continuation ATR Criteria"
input show_color_bar = no;
input sound          = {"Ding", "Bell", "Chimes",default "NoSound", "Ring"};

def na = Double.NaN;
def tr = TrueRange (high, close, low);
####################    COLORS    ################################
DefineGlobalColor("lowerk", CreateColor(255, 0, 98));   # red
DefineGlobalColor("upperk", CreateColor(0, 195, 255));  # blue
DefineGlobalColor("upbar",  CreateColor(38, 166, 154));   # green
DefineGlobalColor("dnbar",  CreateColor(239, 83, 80));    # red
##################################################################

def ma_function;
switch (ATR_smoothing) {
case SMA:
    ma_function = SimpleMovingAvg(tr, ATR_Period);
case EMA:
    ma_function = ExpAverage(tr, ATR_Period);
case WMA:
    ma_function = WMA(tr, ATR_Period);
case RMA:
    ma_function = WildersAverage(tr, ATR_Period);
}
#atr_slen = ma_function(tr(true), atrlen)
def atr_slen = ma_function;
#////ATR Up/Low Bands
def upper_band = atr_slen * ATR_mult + close;
def lower_band = close - atr_slen * ATR_mult;

############ Scripts###############
script nz {
    input data = 0;
    input replacement  = 0;
    def ret_val = if IsNaN(data) then replacement else data;
    plot return = ret_val;
}

#get2PoleSSF(src, length) =>
script get2PoleSSF {
    input src = close;
    input length = 0;
    def PI = 2 * ASin(1);
    def arg = Sqrt(2) * PI / length;
    def a1 = Exp(-arg);
    def b1 = 2 * a1 * Cos(arg);
    def c2 = b1;
    def c3 = -Power(a1, 2);
    def c1 = 1 - c2 - c3;
    def ssf = c1 * src + c2 * nz(ssf[1]) + c3 * nz(ssf[2]);
    plot return = ssf;
}
#get3PoleSSF(src, length) =>
script get3PoleSSF {
    input src = close;
    input length = 0;
    def PI = 2 * ASin(1);
    def arg = PI / length;
    def a1 = Exp(-arg);
    def b1 = 2 * a1 * Cos(1.738 * arg);
    def c1 = Power(a1, 2);
    def coef2 = b1 + c1;
    def coef3 = -(c1 + b1 * c1);
    def coef4 = Power(c1, 2);
    def coef1 = 1 - coef2 - coef3 - coef4;
    def ssf = coef1 * src + coef2 * nz(ssf[1]) + coef3 * nz(ssf[2]) + coef4 * nz(ssf[3]);
    plot Return = ssf;
}
###
#tema(src, len) =>
script TEMA {
    input src = close;
    input len = 0;
    def ema1 = ExpAverage(src, len);
    def ema2 = ExpAverage(ema1, len);
    def ema3 = ExpAverage(ema2, len);
    def tema = (3 * ema1) - (3 * ema2) + ema3;
    plot return = tema;
}
#THMA(_src, _length) =>
script THMA {
    input _src = close;
    input _length = 0;
    def THMA = WMA(WMA(_src, _length / 3) * 3 - WMA(_src, _length / 2) - WMA(_src, _length), _length);
    plot return = THMA;
}
#DEMA(src, len) =>
script DEMA {
    input src = close;
    input len = 0;
    def e    = ExpAverage(src, len);
    def DEMA = 2 * e - ExpAverage(e, len);
    plot result = DEMA;
}
#VAMA(src, len, volatility_lookback) =>
script VAMA {
    input src = close;
    input len = 0;
    input volatility_lookback = 10;
    def mid;
    def dev;
    def vol_up;
    def vol_down;
    mid = ExpAverage(src, len);
    dev = src - mid;
    vol_up = Highest(dev, volatility_lookback);
    vol_down = Lowest(dev, volatility_lookback);
    def VAMA = mid + (vol_up + vol_down) / 2;
    plot result = VAMA;
}
#mf(src, len, z, beta, feedback)
script MF {
    input src = close;
    input len = 0;
    input z = 0;
    input beta = 0.8;
    input feedback = no;
    def ts;
    def alpha = 2 / (len + 1);
    def a = if feedback then z * src + (1 - z) * nz(ts[1], src) else src;
    def b = if a > alpha * a + (1 - alpha) * nz(b[1], a) then a else alpha * a + (1 - alpha) * nz(b[1], a);
    def c = if a < alpha * a + (1 - alpha) * nz(c[1], a) then a else alpha * a + (1 - alpha) * nz(c[1], a);
    def os = if a == b then 1 else if a == c then 0 else os[1];
    def upper = beta * b + (1 - beta) * c;
    def lower = beta * c + (1 - beta) * b;
    ts = os * upper + (1 - os) * lower;
    plot result = ts;
}
#JMA(src, len, jurik_phase, jurik_power)
script JMA {
    input src = close;
    input len = 0;
    input jurik_phase = 3;
    input jurik_power = 1;
    def jma;
    def phaseRatio = if jurik_phase < -100 then 0.5 else
                     if jurik_phase >  100 then 2.5 else jurik_phase / 100 + 1.5;
    def beta = 0.45 * (len - 1) / (0.45 * (len - 1) + 2);
    def alpha = Power(beta, jurik_power);
    def e0 = (1 - alpha) * src + alpha * nz(e0[1]);
    def e1 = (src - e0) * (1 - beta) + beta * nz(e1[1]);
    def e2 = (e0 + phaseRatio * e1 - nz(jma[1])) * Power(1 - alpha, 2) + Power(alpha, 2) * nz(e2[1]);
    jma  = e2 + nz(jma[1]);
    plot result = jma;
}
#Kijun_v2(src, len, kidiv)
script Kijun_v2 {
    input src = close;
    input len = 0;
    input kidiv = 1;
    def kijun = (Lowest(src, len) + Highest(src, len)) / 2;
    def conversionLine = (Lowest(src, len / kidiv) + Highest(src, len / kidiv)) / 2;
    def delta = (kijun + conversionLine) / 2;
    plot result = delta;
}
#McGinley(src, len)
script mg {
    input src = close;
    input len = 0;
#    def McGinley = McGinley[1] + (src - McGinley[1]) / (len * Power(src / McGinley[1], 4));
#    def MDI = ExpAverage(src, len)[1];
    def Mcg = if IsNaN(Mcg[1]) then ExpAverage(src, len) else
  CompoundValue(1, Mcg[1] + ((src - Mcg[1]) / (len * Power(src / Mcg[1], 4))), src);
#    def mg = if IsNaN(MDI) then ExpAverage(src, len) else
#                 MDI[1] + (src - MDI[1]) / (len * Power(src / MDI[1], 4));
    plot result = Mcg;
}
#EDSMA(src, len,ssfLength, ssfPoles)
script EDSMA {
    input src = close;
    input len = 0;
    input ssfLength = 20;
    input ssfPoles = 2;
    def zeros = src - nz(src[2]);
    def avgZeros = (zeros + zeros[1]) / 2;
    def ssf = if ssfPoles == 2 then get2PoleSSF(avgZeros, ssfLength) else
                                    get3PoleSSF(avgZeros, ssfLength);  
    def stdev = StDev(ssf, len);
    def scaledFilter = if stdev != 0 then ssf / stdev else 0;
    def alpha = 5 * AbsValue(scaledFilter) / len;
    def edsma = alpha * src + (1 - alpha) * nz(edsma[1]);
    plot result =  edsma;
}
#mama(type, src, len, z, beta, feedback, jurik_phase, jurik_power, kidiv, ssfLength, ssfPoles, volatility_lookback)
script ma {
    input type = "SMA";
    input src  = close;
    input len = 0;
    input z = 0.5;
    input beta = 0.8;
    input feedback = no;
    input jurik_phase = 3;
    input jurik_power = 1;
    input kidiv = 1;
    input ssfLength = 20;
    input ssfPoles = 2;
    input volatility_lookback = 10;
    def  ma = if type == "TMA" then
            SimpleMovingAvg(SimpleMovingAvg(src, Ceil(len / 2)), Floor(len / 2) + 1) else
        if type == "MF" then
            mf(src, len, z, beta, feedback) else
        if type == "THMA" then
           THMA(src, len) else
        if type == "LSMA" then
            Inertia(src, len) else
        if type == "SMA" then
            SimpleMovingAvg(src, len) else
        if type == "EMA" then
            ExpAverage(src, len) else
        if type == "DEMA" then
           DEMA(src, len) else
        if type == "TEMA" then
           TEMA(src, len) else
        if type == "WMA" then
           WMA(src, len) else
        if type == "VAMA" then
           VAMA(src, len, volatility_lookback) else
        if type == "HMA" then
           WMA(2 * WMA(src, len / 2) - WMA(src, len), Round(Sqrt(len))) else
        if type == "JMA" then
          JMA(src, len, jurik_phase, jurik_power) else
        if type == "Kijun_v2" then
          Kijun_v2(src, len, kidiv) else
        if type == "McGinley" then
          mg(src, len) else
          EDSMA(src, len, ssfLength, ssfPoles);
    plot result = ma;
}
#///SSL 1 and SSL2
#ma(type, src, len, z, beta, feedback, jurik_phase, jurik_power, kidiv, ssfLength, ssfPoles, volatility_lookback)
def emaHigh = ma(type = ssl1_BaselineType, src = high, len = SSL1_Length, z = FeedbackWeighting, beta = FilterBeta, feedback = FilterFeedback, jurik_phase = jurik_phase, jurik_power = jurik_power, kidiv = Kijun_MOD_Divider, ssfLength = EDSMaLength, ssfPoles = EDSMaPoles, volatility_lookback = volatility_lookback);

def emaLow = ma(type = ssl1_BaselineType, src = low, len = SSL1_Length, z = FeedbackWeighting, beta = FilterBeta, feedback = FilterFeedback, jurik_phase = jurik_phase, jurik_power = jurik_power, kidiv = Kijun_MOD_Divider, ssfLength = EDSMaLength, ssfPoles = EDSMaPoles, volatility_lookback = volatility_lookback);

def maHigh = ma(type = SSL2ContinuType, src = high, len = SSL2_Length, z = FeedbackWeighting, beta = FilterBeta, feedback = FilterFeedback, jurik_phase = jurik_phase, jurik_power = jurik_power, kidiv = Kijun_MOD_Divider, ssfLength = EDSMaLength, ssfPoles = EDSMaPoles, volatility_lookback = volatility_lookback);

def maLow = ma(type = SSL2ContinuType, src = low, len = SSL2_Length, z = FeedbackWeighting, beta = FilterBeta, feedback = FilterFeedback, jurik_phase = jurik_phase, jurik_power = jurik_power, kidiv = Kijun_MOD_Divider, ssfLength = EDSMaLength, ssfPoles = EDSMaPoles, volatility_lookback = volatility_lookback);

#///EXIT
def ExitHigh = ma(type = ExitType, src = high, len = EXIT_Length, z = FeedbackWeighting, beta = FilterBeta, feedback = FilterFeedback, jurik_phase = jurik_phase, jurik_power = jurik_power, kidiv = Kijun_MOD_Divider, ssfLength = EDSMaLength, ssfPoles = EDSMaPoles, volatility_lookback = volatility_lookback);

def ExitLow = ma(type = ExitType, src = low, len = EXIT_Length, z = FeedbackWeighting, beta = FilterBeta, feedback = FilterFeedback, jurik_phase = jurik_phase, jurik_power = jurik_power, kidiv = Kijun_MOD_Divider, ssfLength = EDSMaLength, ssfPoles = EDSMaPoles, volatility_lookback = volatility_lookback);

#///Keltner Baseline Channel
def BBMC = ma(type = ssl1_BaselineType, src = close, len = SSL1_Length, z = FeedbackWeighting, beta = FilterBeta, feedback = FilterFeedback, jurik_phase = jurik_phase, jurik_power = jurik_power, kidiv = Kijun_MOD_Divider, ssfLength = EDSMaLength, ssfPoles = EDSMaPoles, volatility_lookback = volatility_lookback);

def Keltma = ma(type = ssl1_BaselineType, src = src, len = SSL1_Length, z = FeedbackWeighting, beta = FilterBeta, feedback = FilterFeedback, jurik_phase = jurik_phase, jurik_power = jurik_power, kidiv = Kijun_MOD_Divider, ssfLength = EDSMaLength, ssfPoles = EDSMaPoles, volatility_lookback = volatility_lookback);
def range = if useTrueRange then tr else high - low;
def rangema = ExpAverage(range, SSL1_Length);
def upperk = Keltma + rangema * Channel_Mult;
def lowerk = Keltma - rangema * Channel_Mult;

#//Baseline Violation Candle
def open_pos =  open;
def close_pos = close;
def difference = AbsValue(close - open);
def atr_violation = difference > atr_slen;
def InRange = upper_band > BBMC and lower_band < BBMC;
def candlesize_violation = atr_violation and InRange;

plot candlesize = if CandleMore_1xATR then if candlesize_violation then high else na else na; #"Candle Size > 1xATR"
candlesize.SetDefaultColor(Color.YELLOW);
candlesize.SetPaintingStrategy(PaintingStrategy.TRIANGLES);
candlesize.SetLineWeight(3);

#//SSL1 VALUES
def Hlv = if close > emaHigh then 1 else if close < emaLow then -1 else Hlv[1];
def sslDown = if Hlv < 0 then emaHigh else emaLow;

#//SSL2 VALUES
def Hlv2 = if close > maHigh then 1 else if close < maLow then -1 else Hlv2[1];
def sslDown2 = if Hlv2 < 0 then maHigh else maLow;

#//EXIT VALUES
def Hlv3 = if close > ExitHigh then 1 else if close < ExitLow then -1 else Hlv3[1];
def sslExit = if Hlv3 < 0 then ExitHigh else ExitLow;
def base_cross_Long  = close crosses above sslExit;
def base_cross_Short = sslExit crosses above close;
def codiff = if base_cross_Long then 1 else if base_cross_Short then -1 else na;

#//COLORS
AssignPriceColor( if show_color_bar then if close > upperk then GlobalColor("upbar")
                                    else if close < lowerk then GlobalColor("dnbar")
                                    else Color.GRAY else Color.CURRENT);
#//PLOTS
plot ArUp = if Show_Arrow and codiff > 0 then low else na;
plot ArDN = if Show_Arrow and codiff < 0 then high else na;

ArUp.SetPaintingStrategy(PaintingStrategy.ARROW_UP);
ArUp.SetDefaultColor(GlobalColor("upperk"));
ArUp.SetLineWeight(2);

ArDN.SetPaintingStrategy(PaintingStrategy.ARROW_DOWN);
ArDN.SetDefaultColor(GlobalColor("lowerk"));
ArDN.SetLineWeight(2);

def color_bar = if close > upperk then 1 else if close < lowerk then -1 else 0;

plot p1 = if show_Baseline then BBMC else na; #MA Baseline
p1.SetStyle(Curve.FIRM);
p1.AssignValueColor(if color_bar > 0 then GlobalColor("upperk") else
                    if color_bar < 0 then GlobalColor("lowerk") else Color.GRAY);
p1.SetLineWeight(4);

plot DownPlot = if SSL1_Line then sslDown else na; #"SSL1"
DownPlot.SetStyle(Curve.FIRM);
DownPlot.AssignValueColor(if close > sslDown then GlobalColor("upperk") else
                          if close < sslDown then GlobalColor("lowerk") else Color.CURRENT);
DownPlot.SetLineWeight(3);

plot up_channel  = if SSL_Channel then upperk else na; #"Baseline Upper Channel")
up_channel.SetStyle(Curve.FIRM);
up_channel.AssignValueColor(if color_bar > 0 then GlobalColor("upperk") else
                            if color_bar < 0 then GlobalColor("lowerk") else Color.GRAY);
up_channel.SetLineWeight(1);

plot low_channel = if SSL_Channel then lowerk else na; #"Basiline Lower Channel")
low_channel.SetStyle(Curve.FIRM);
low_channel.AssignValueColor(if color_bar > 0 then GlobalColor("upperk") else
                             if color_bar < 0 then GlobalColor("lowerk") else Color.GRAY);
low_channel.SetLineWeight(1);

AddCloud (if Show_Cloud and color_bar  > 0 then upperk else na, lowerk, GlobalColor("upperk"));
AddCloud (if Show_Cloud and color_bar  < 0 then upperk else na, lowerk, GlobalColor("lowerk"));
AddCloud (if Show_Cloud and !color_bar then upperk else na, lowerk, Color.GRAY);

#////SSL2 Continiuation from ATR
def upper_half = atr_slen * Continu_ATR + close;
def lower_half = close - atr_slen * Continu_ATR;
def buy_inatr =  lower_half < sslDown2;
def sell_inatr = upper_half > sslDown2;
def sell_cont = close < BBMC and close < sslDown2;
def buy_cont = close > BBMC and close > sslDown2;
def sell_atr = sell_inatr and sell_cont;
def buy_atr = buy_inatr and buy_cont;
def atr_fill = if buy_atr then 1 else if sell_atr then -1 else 0;

plot LongPlot = if SSL2_Line then sslDown2 else na;
LongPlot.SetPaintingStrategy(PaintingStrategy.LINE_VS_POINTS);
LongPlot.AssignValueColor(if atr_fill > 0 then Color.GREEN else
                          if atr_fill < 0 then Color.MAGENTA else Color.WHITE);
LongPlot.SetLineWeight(1);

plot u = if ATR_Bands then upper_band else na; # "+ATR", color=color.white, transp=80)
u.SetDefaultColor(Color.GRAY);
plot l = if ATR_Bands then lower_band else na; # "-ATR", color=color.white, transp=80)
l.SetDefaultColor(Color.GRAY);

#//ALERTS
alert(close crosses above sslDown,  "SSL1 has crossed", Alert.Bar, sound);
alert(close crosses below sslDown2, "SSL2 has crossed", Alert.Bar, sound);
alert(sell_atr, "Sell Continuation", Alert.Bar, sound);
alert(buy_atr,  "Buy Continuation", Alert.Bar, sound);
alert(close crosses above sslExit, "Exit Sell Alert", Alert.Bar, sound);
alert(sslExit crosses below close, "Exit Buy Alert", Alert.Bar, sound);
alert(close crosses above upperk,  "Base Buy Alert", Alert.Bar, sound);
alert(lowerk crosses below close,  "Base Sell Alert", Alert.Bar, sound);

#####END #########
 
Last edited by a moderator:
slowly learning how to code. I just tried to scan and it says "TooComplexException" "May not be reliable with real-time data"

Hmmm I didn't change anything. Is there no way around it?
Yes, you will find many indicators display the too complex triangle at the top of the script window.
While no script is "too complex" to plot on the chart; Schwab does throttle the use of complex scripts in scans, watchlists, and conditional orders to prevent high load runs on the TDA servers.

Scripts with the complex triangle at the top of the study window can not be used in the scan hacker, watchlists, or conditional orders. These studies are limited to plotting on a chart.

For sure the script is too complex too scan for arrows. What about the SL1 Line is there a way to scan for when red switches to blue or when the blue line switches to red. I would be fine if the line switches to even grey. Just thinking of a simple way to be able to scan with it.
Is there anyway I can get a white circle when the baseline crosses from blue/grey/red
samer800[/USER] @MerryDay?

I'm using the second script by @samer800

Code:
#//By Mihkel00
#// This script is designed for the NNFX Method, so it is recommended for Daily charts only.
#// This script has a SSL / Baseline (you can choose between the SSL or MA), a secondary SSL for continiuation #trades and a third SSL for exit trades.
#// Alerts added for Baseline entries, SSL2 continuations, Exits.
#// Baseline has a Keltner Channel setting for "in zone" Gray Candles
#// Added "Candle Size > 1 ATR" Diamonds from my old script with the criteria of being within Baseline ATR range.
#// Strategy causecelebre https://www.tradingview.com/u/causecelebre/
#// SSL Channel ErwinBeckers https://www.tradingview.com/u/ErwinBeckers/
#// Moving Averages jiehonglim https://www.tradingview.com/u/jiehonglim/
#// Moving Averages  everget https://www.tradingview.com/u/everget/
#// "Many Moving Averages" script  Fractured https://www.tradingview.com/u/Fractured/
#// study("SSL Hybrid")
### Converted by SAM4COK - 07/2022 ## 09/2022 Added THMA as requested by usethinkscript.com memeber.
input show_Baseline = yes;     #"Show Baseline"
input SSL1_Line     = no;      #"Show SSL1"
input SSL2_Line     = no;
input ATR_Bands     = no;     #"Show ATR bands"
input CandleMore_1xATR = no;
input SSL_Channel   = no;
input Show_Arrow    = no;
input Show_Cloud    = no;

#//ATR
input ATR_Period = 14;         #"ATR Period"
input ATR_mult   = 1;          #"ATR Multi"
input ATR_smoothing  = {default WMA, RMA, SMA, EMA};    #"ATR Smoothing"
#////BASELINE / SSL1 / SSL2 / EXIT MOVING AVERAGE VALUES
input ssl1_BaselineType  = {"SMA", "EMA", "DEMA", "TEMA", "LSMA", "WMA", "MF", "VAMA", "TMA", default "HMA", "THMA", "JMA", "Kijun_v2", "EDSMA", "McGinley"};    #"SSL1 / Baseline Type"
input SSL1_Length = 60;                     #"SSL1 / Baseline Length"
input SSL2ContinuType = {"SMA", "EMA", "DEMA", "TEMA", "WMA", "MF", "VAMA", "TMA", "THMA", "HMA", default "JMA", "McGinley"};
input SSL2_Length = 5;                     #"SSL 2 Length"
input ExitType = {"DEMA", "TEMA", "LSMA", "VAMA", "TMA", default "HMA", "THMA", "JMA", "Kijun v2", "McGinley", "MF"}; #"EXIT Type"
input EXIT_Length = 15;      #"EXIT Length"
input src = close;
########
input Kijun_MOD_Divider = 1;     #"Kijun MOD Divider"
input jurik_phase = 3;           #"* Jurik (JMA) Only - Phase"
input jurik_power = 1;           #"* Jurik (JMA) Only - Power"
input volatility_lookback = 10;  #"* Volatility Adjusted (VAMA) Only - Volatility lookback length"
input FilterBeta = 0.8;          #"Modular Filter, General Filter Only - Beta"
input FilterFeedback = no ;      #"Modular Filter Only - Feedback"
input FeedbackWeighting = 0.5;   #"Modular Filter Only - Feedback Weighting"
#//EDSMA
input EDSMaLength = 20;                 #"EDSMA - Super Smoother Filter Length"
input EDSMaPoles  = {default "2", "3"}; #"EDSMA - Super Smoother Filter Poles"

input useTrueRange   = yes;
input Channel_Mult   = 0.2;        #"Base Channel Multiplier"
input Continu_ATR    = 0.9;        #"Continuation ATR Criteria"
input show_color_bar = no;
input sound          = {"Ding", "Bell", "Chimes",default "NoSound", "Ring"};

def na = Double.NaN;
def tr = TrueRange (high, close, low);
####################    COLORS    ################################
DefineGlobalColor("lowerk", CreateColor(255, 0, 98));   # red
DefineGlobalColor("upperk", CreateColor(0, 195, 255));  # blue
DefineGlobalColor("upbar",  CreateColor(38, 166, 154));   # green
DefineGlobalColor("dnbar",  CreateColor(239, 83, 80));    # red
##################################################################

def ma_function;
switch (ATR_smoothing) {
case SMA:
    ma_function = SimpleMovingAvg(tr, ATR_Period);
case EMA:
    ma_function = ExpAverage(tr, ATR_Period);
case WMA:
    ma_function = WMA(tr, ATR_Period);
case RMA:
    ma_function = WildersAverage(tr, ATR_Period);
}
#atr_slen = ma_function(tr(true), atrlen)
def atr_slen = ma_function;
#////ATR Up/Low Bands
def upper_band = atr_slen * ATR_mult + close;
def lower_band = close - atr_slen * ATR_mult;

############ Scripts###############
script nz {
    input data = 0;
    input replacement  = 0;
    def ret_val = if IsNaN(data) then replacement else data;
    plot return = ret_val;
}

#get2PoleSSF(src, length) =>
script get2PoleSSF {
    input src = close;
    input length = 0;
    def PI = 2 * ASin(1);
    def arg = Sqrt(2) * PI / length;
    def a1 = Exp(-arg);
    def b1 = 2 * a1 * Cos(arg);
    def c2 = b1;
    def c3 = -Power(a1, 2);
    def c1 = 1 - c2 - c3;
    def ssf = c1 * src + c2 * nz(ssf[1]) + c3 * nz(ssf[2]);
    plot return = ssf;
}
#get3PoleSSF(src, length) =>
script get3PoleSSF {
    input src = close;
    input length = 0;
    def PI = 2 * ASin(1);
    def arg = PI / length;
    def a1 = Exp(-arg);
    def b1 = 2 * a1 * Cos(1.738 * arg);
    def c1 = Power(a1, 2);
    def coef2 = b1 + c1;
    def coef3 = -(c1 + b1 * c1);
    def coef4 = Power(c1, 2);
    def coef1 = 1 - coef2 - coef3 - coef4;
    def ssf = coef1 * src + coef2 * nz(ssf[1]) + coef3 * nz(ssf[2]) + coef4 * nz(ssf[3]);
    plot Return = ssf;
}
###
#tema(src, len) =>
script TEMA {
    input src = close;
    input len = 0;
    def ema1 = ExpAverage(src, len);
    def ema2 = ExpAverage(ema1, len);
    def ema3 = ExpAverage(ema2, len);
    def tema = (3 * ema1) - (3 * ema2) + ema3;
    plot return = tema;
}
#THMA(_src, _length) =>
script THMA {
    input _src = close;
    input _length = 0;
    def THMA = WMA(WMA(_src, _length / 3) * 3 - WMA(_src, _length / 2) - WMA(_src, _length), _length);
    plot return = THMA;
}
#DEMA(src, len) =>
script DEMA {
    input src = close;
    input len = 0;
    def e    = ExpAverage(src, len);
    def DEMA = 2 * e - ExpAverage(e, len);
    plot result = DEMA;
}
#VAMA(src, len, volatility_lookback) =>
script VAMA {
    input src = close;
    input len = 0;
    input volatility_lookback = 10;
    def mid;
    def dev;
    def vol_up;
    def vol_down;
    mid = ExpAverage(src, len);
    dev = src - mid;
    vol_up = Highest(dev, volatility_lookback);
    vol_down = Lowest(dev, volatility_lookback);
    def VAMA = mid + (vol_up + vol_down) / 2;
    plot result = VAMA;
}
#mf(src, len, z, beta, feedback)
script MF {
    input src = close;
    input len = 0;
    input z = 0;
    input beta = 0.8;
    input feedback = no;
    def ts;
    def alpha = 2 / (len + 1);
    def a = if feedback then z * src + (1 - z) * nz(ts[1], src) else src;
    def b = if a > alpha * a + (1 - alpha) * nz(b[1], a) then a else alpha * a + (1 - alpha) * nz(b[1], a);
    def c = if a < alpha * a + (1 - alpha) * nz(c[1], a) then a else alpha * a + (1 - alpha) * nz(c[1], a);
    def os = if a == b then 1 else if a == c then 0 else os[1];
    def upper = beta * b + (1 - beta) * c;
    def lower = beta * c + (1 - beta) * b;
    ts = os * upper + (1 - os) * lower;
    plot result = ts;
}
#JMA(src, len, jurik_phase, jurik_power)
script JMA {
    input src = close;
    input len = 0;
    input jurik_phase = 3;
    input jurik_power = 1;
    def jma;
    def phaseRatio = if jurik_phase < -100 then 0.5 else
                     if jurik_phase >  100 then 2.5 else jurik_phase / 100 + 1.5;
    def beta = 0.45 * (len - 1) / (0.45 * (len - 1) + 2);
    def alpha = Power(beta, jurik_power);
    def e0 = (1 - alpha) * src + alpha * nz(e0[1]);
    def e1 = (src - e0) * (1 - beta) + beta * nz(e1[1]);
    def e2 = (e0 + phaseRatio * e1 - nz(jma[1])) * Power(1 - alpha, 2) + Power(alpha, 2) * nz(e2[1]);
    jma  = e2 + nz(jma[1]);
    plot result = jma;
}
#Kijun_v2(src, len, kidiv)
script Kijun_v2 {
    input src = close;
    input len = 0;
    input kidiv = 1;
    def kijun = (Lowest(src, len) + Highest(src, len)) / 2;
    def conversionLine = (Lowest(src, len / kidiv) + Highest(src, len / kidiv)) / 2;
    def delta = (kijun + conversionLine) / 2;
    plot result = delta;
}
#McGinley(src, len)
script mg {
    input src = close;
    input len = 0;
#    def McGinley = McGinley[1] + (src - McGinley[1]) / (len * Power(src / McGinley[1], 4));
#    def MDI = ExpAverage(src, len)[1];
    def Mcg = if IsNaN(Mcg[1]) then ExpAverage(src, len) else
  CompoundValue(1, Mcg[1] + ((src - Mcg[1]) / (len * Power(src / Mcg[1], 4))), src);
#    def mg = if IsNaN(MDI) then ExpAverage(src, len) else
#                 MDI[1] + (src - MDI[1]) / (len * Power(src / MDI[1], 4));
    plot result = Mcg;
}
#EDSMA(src, len,ssfLength, ssfPoles)
script EDSMA {
    input src = close;
    input len = 0;
    input ssfLength = 20;
    input ssfPoles = 2;
    def zeros = src - nz(src[2]);
    def avgZeros = (zeros + zeros[1]) / 2;
    def ssf = if ssfPoles == 2 then get2PoleSSF(avgZeros, ssfLength) else
                                    get3PoleSSF(avgZeros, ssfLength);
    def stdev = StDev(ssf, len);
    def scaledFilter = if stdev != 0 then ssf / stdev else 0;
    def alpha = 5 * AbsValue(scaledFilter) / len;
    def edsma = alpha * src + (1 - alpha) * nz(edsma[1]);
    plot result =  edsma;
}
#mama(type, src, len, z, beta, feedback, jurik_phase, jurik_power, kidiv, ssfLength, ssfPoles, volatility_lookback)
script ma {
    input type = "SMA";
    input src  = close;
    input len = 0;
    input z = 0.5;
    input beta = 0.8;
    input feedback = no;
    input jurik_phase = 3;
    input jurik_power = 1;
    input kidiv = 1;
    input ssfLength = 20;
    input ssfPoles = 2;
    input volatility_lookback = 10;
    def  ma = if type == "TMA" then
            SimpleMovingAvg(SimpleMovingAvg(src, Ceil(len / 2)), Floor(len / 2) + 1) else
        if type == "MF" then
            mf(src, len, z, beta, feedback) else
        if type == "THMA" then
           THMA(src, len) else
        if type == "LSMA" then
            Inertia(src, len) else
        if type == "SMA" then
            SimpleMovingAvg(src, len) else
        if type == "EMA" then
            ExpAverage(src, len) else
        if type == "DEMA" then
           DEMA(src, len) else
        if type == "TEMA" then
           TEMA(src, len) else
        if type == "WMA" then
           WMA(src, len) else
        if type == "VAMA" then
           VAMA(src, len, volatility_lookback) else
        if type == "HMA" then
           WMA(2 * WMA(src, len / 2) - WMA(src, len), Round(Sqrt(len))) else
        if type == "JMA" then
          JMA(src, len, jurik_phase, jurik_power) else
        if type == "Kijun_v2" then
          Kijun_v2(src, len, kidiv) else
        if type == "McGinley" then
          mg(src, len) else
          EDSMA(src, len, ssfLength, ssfPoles);
    plot result = ma;
}
#///SSL 1 and SSL2
#ma(type, src, len, z, beta, feedback, jurik_phase, jurik_power, kidiv, ssfLength, ssfPoles, volatility_lookback)
def emaHigh = ma(type = ssl1_BaselineType, src = high, len = SSL1_Length, z = FeedbackWeighting, beta = FilterBeta, feedback = FilterFeedback, jurik_phase = jurik_phase, jurik_power = jurik_power, kidiv = Kijun_MOD_Divider, ssfLength = EDSMaLength, ssfPoles = EDSMaPoles, volatility_lookback = volatility_lookback);

def emaLow = ma(type = ssl1_BaselineType, src = low, len = SSL1_Length, z = FeedbackWeighting, beta = FilterBeta, feedback = FilterFeedback, jurik_phase = jurik_phase, jurik_power = jurik_power, kidiv = Kijun_MOD_Divider, ssfLength = EDSMaLength, ssfPoles = EDSMaPoles, volatility_lookback = volatility_lookback);

def maHigh = ma(type = SSL2ContinuType, src = high, len = SSL2_Length, z = FeedbackWeighting, beta = FilterBeta, feedback = FilterFeedback, jurik_phase = jurik_phase, jurik_power = jurik_power, kidiv = Kijun_MOD_Divider, ssfLength = EDSMaLength, ssfPoles = EDSMaPoles, volatility_lookback = volatility_lookback);

def maLow = ma(type = SSL2ContinuType, src = low, len = SSL2_Length, z = FeedbackWeighting, beta = FilterBeta, feedback = FilterFeedback, jurik_phase = jurik_phase, jurik_power = jurik_power, kidiv = Kijun_MOD_Divider, ssfLength = EDSMaLength, ssfPoles = EDSMaPoles, volatility_lookback = volatility_lookback);

#///EXIT
def ExitHigh = ma(type = ExitType, src = high, len = EXIT_Length, z = FeedbackWeighting, beta = FilterBeta, feedback = FilterFeedback, jurik_phase = jurik_phase, jurik_power = jurik_power, kidiv = Kijun_MOD_Divider, ssfLength = EDSMaLength, ssfPoles = EDSMaPoles, volatility_lookback = volatility_lookback);

def ExitLow = ma(type = ExitType, src = low, len = EXIT_Length, z = FeedbackWeighting, beta = FilterBeta, feedback = FilterFeedback, jurik_phase = jurik_phase, jurik_power = jurik_power, kidiv = Kijun_MOD_Divider, ssfLength = EDSMaLength, ssfPoles = EDSMaPoles, volatility_lookback = volatility_lookback);

#///Keltner Baseline Channel
def BBMC = ma(type = ssl1_BaselineType, src = close, len = SSL1_Length, z = FeedbackWeighting, beta = FilterBeta, feedback = FilterFeedback, jurik_phase = jurik_phase, jurik_power = jurik_power, kidiv = Kijun_MOD_Divider, ssfLength = EDSMaLength, ssfPoles = EDSMaPoles, volatility_lookback = volatility_lookback);

def Keltma = ma(type = ssl1_BaselineType, src = src, len = SSL1_Length, z = FeedbackWeighting, beta = FilterBeta, feedback = FilterFeedback, jurik_phase = jurik_phase, jurik_power = jurik_power, kidiv = Kijun_MOD_Divider, ssfLength = EDSMaLength, ssfPoles = EDSMaPoles, volatility_lookback = volatility_lookback);
def range = if useTrueRange then tr else high - low;
def rangema = ExpAverage(range, SSL1_Length);
def upperk = Keltma + rangema * Channel_Mult;
def lowerk = Keltma - rangema * Channel_Mult;

#//Baseline Violation Candle
def open_pos =  open;
def close_pos = close;
def difference = AbsValue(close - open);
def atr_violation = difference > atr_slen;
def InRange = upper_band > BBMC and lower_band < BBMC;
def candlesize_violation = atr_violation and InRange;

plot candlesize = if CandleMore_1xATR then if candlesize_violation then high else na else na; #"Candle Size > 1xATR"
candlesize.SetDefaultColor(Color.YELLOW);
candlesize.SetPaintingStrategy(PaintingStrategy.TRIANGLES);
candlesize.SetLineWeight(3);

#//SSL1 VALUES
def Hlv = if close > emaHigh then 1 else if close < emaLow then -1 else Hlv[1];
def sslDown = if Hlv < 0 then emaHigh else emaLow;

#//SSL2 VALUES
def Hlv2 = if close > maHigh then 1 else if close < maLow then -1 else Hlv2[1];
def sslDown2 = if Hlv2 < 0 then maHigh else maLow;

#//EXIT VALUES
def Hlv3 = if close > ExitHigh then 1 else if close < ExitLow then -1 else Hlv3[1];
def sslExit = if Hlv3 < 0 then ExitHigh else ExitLow;
def base_cross_Long  = close crosses above sslExit;
def base_cross_Short = sslExit crosses above close;
def codiff = if base_cross_Long then 1 else if base_cross_Short then -1 else na;

#//COLORS
AssignPriceColor( if show_color_bar then if close > upperk then GlobalColor("upbar")
                                    else if close < lowerk then GlobalColor("dnbar")
                                    else Color.GRAY else Color.CURRENT);
#//PLOTS
plot ArUp = if Show_Arrow and codiff > 0 then low else na;
plot ArDN = if Show_Arrow and codiff < 0 then high else na;

ArUp.SetPaintingStrategy(PaintingStrategy.ARROW_UP);
ArUp.SetDefaultColor(GlobalColor("upperk"));
ArUp.SetLineWeight(2);

ArDN.SetPaintingStrategy(PaintingStrategy.ARROW_DOWN);
ArDN.SetDefaultColor(GlobalColor("lowerk"));
ArDN.SetLineWeight(2);

def color_bar = if close > upperk then 1 else if close < lowerk then -1 else 0;

plot p1 = if show_Baseline then BBMC else na; #MA Baseline
p1.SetStyle(Curve.FIRM);
p1.AssignValueColor(if color_bar > 0 then GlobalColor("upperk") else
                    if color_bar < 0 then GlobalColor("lowerk") else Color.GRAY);
p1.SetLineWeight(4);

plot DownPlot = if SSL1_Line then sslDown else na; #"SSL1"
DownPlot.SetStyle(Curve.FIRM);
DownPlot.AssignValueColor(if close > sslDown then GlobalColor("upperk") else
                          if close < sslDown then GlobalColor("lowerk") else Color.CURRENT);
DownPlot.SetLineWeight(3);

plot up_channel  = if SSL_Channel then upperk else na; #"Baseline Upper Channel")
up_channel.SetStyle(Curve.FIRM);
up_channel.AssignValueColor(if color_bar > 0 then GlobalColor("upperk") else
                            if color_bar < 0 then GlobalColor("lowerk") else Color.GRAY);
up_channel.SetLineWeight(1);

plot low_channel = if SSL_Channel then lowerk else na; #"Basiline Lower Channel")
low_channel.SetStyle(Curve.FIRM);
low_channel.AssignValueColor(if color_bar > 0 then GlobalColor("upperk") else
                             if color_bar < 0 then GlobalColor("lowerk") else Color.GRAY);
low_channel.SetLineWeight(1);

AddCloud (if Show_Cloud and color_bar  > 0 then upperk else na, lowerk, GlobalColor("upperk"));
AddCloud (if Show_Cloud and color_bar  < 0 then upperk else na, lowerk, GlobalColor("lowerk"));
AddCloud (if Show_Cloud and !color_bar then upperk else na, lowerk, Color.GRAY);

#////SSL2 Continiuation from ATR
def upper_half = atr_slen * Continu_ATR + close;
def lower_half = close - atr_slen * Continu_ATR;
def buy_inatr =  lower_half < sslDown2;
def sell_inatr = upper_half > sslDown2;
def sell_cont = close < BBMC and close < sslDown2;
def buy_cont = close > BBMC and close > sslDown2;
def sell_atr = sell_inatr and sell_cont;
def buy_atr = buy_inatr and buy_cont;
def atr_fill = if buy_atr then 1 else if sell_atr then -1 else 0;

plot LongPlot = if SSL2_Line then sslDown2 else na;
LongPlot.SetPaintingStrategy(PaintingStrategy.LINE_VS_POINTS);
LongPlot.AssignValueColor(if atr_fill > 0 then Color.GREEN else
                          if atr_fill < 0 then Color.MAGENTA else Color.WHITE);
LongPlot.SetLineWeight(1);

plot u = if ATR_Bands then upper_band else na; # "+ATR", color=color.white, transp=80)
u.SetDefaultColor(Color.GRAY);
plot l = if ATR_Bands then lower_band else na; # "-ATR", color=color.white, transp=80)
l.SetDefaultColor(Color.GRAY);

#//ALERTS
alert(close crosses above sslDown,  "SSL1 has crossed", Alert.Bar, sound);
alert(close crosses below sslDown2, "SSL2 has crossed", Alert.Bar, sound);
alert(sell_atr, "Sell Continuation", Alert.Bar, sound);
alert(buy_atr,  "Buy Continuation", Alert.Bar, sound);
alert(close crosses above sslExit, "Exit Sell Alert", Alert.Bar, sound);
alert(sslExit crosses below close, "Exit Buy Alert", Alert.Bar, sound);
alert(close crosses above upperk,  "Base Buy Alert", Alert.Bar, sound);
alert(lowerk crosses below close,  "Base Sell Alert", Alert.Bar, sound);

#####END #########
The scripts in this thread are too complex to be used in the scan hacker.
Regardless of what you want to scan for.
 
Last edited:
I am new to the forum so pardon my ignorance..In other softwares one could call subroutines..So your comments leads me to a question I have been searching an answer to.
If one calls another Script via a refence statement. Does ThinkScript transfers only the code or does transfer the code and the calculated results from the Script.
In other words ThinkScript would recalculate the transfered code..For Example a Too complex Script has already been calculated to be displayed on the Chart..Why recalculate again?
So a refence simply saves one from having to record the code?
Thanks
 
Hey @samer800 is there anyway to get the color to work on the baseline to show up on mobile. If you could do that that would be fantastic!
If the color is not showing up on mobile, then no, there is no workaround to that limitation of the ToS mobile app.
 

Join useThinkScript to post your question to a community of 21,000+ developers and traders.

Similar threads

Not the exact question you're looking for?

Start a new thread and receive assistance from our community.

87k+ Posts
461 Online
Create Post

Similar threads

Similar threads

The Market Trading Game Changer

Join 2,500+ subscribers inside the useThinkScript VIP Membership Club
  • Exclusive indicators
  • Proven strategies & setups
  • Private Discord community
  • ‘Buy The Dip’ signal alerts
  • Exclusive members-only content
  • Add-ons and resources
  • 1 full year of unlimited support

Frequently Asked Questions

What is useThinkScript?

useThinkScript is the #1 community of stock market investors using indicators and other tools to power their trading strategies. Traders of all skill levels use our forums to learn about scripting and indicators, help each other, and discover new ways to gain an edge in the markets.

How do I get started?

We get it. Our forum can be intimidating, if not overwhelming. With thousands of topics, tens of thousands of posts, our community has created an incredibly deep knowledge base for stock traders. No one can ever exhaust every resource provided on our site.

If you are new, or just looking for guidance, here are some helpful links to get you started.

What are the benefits of VIP Membership?
VIP members get exclusive access to these proven and tested premium indicators: Buy the Dip, Advanced Market Moves 2.0, Take Profit, and Volatility Trading Range. In addition, VIP members get access to over 50 VIP-only custom indicators, add-ons, and strategies, private VIP-only forums, private Discord channel to discuss trades and strategies in real-time, customer support, trade alerts, and much more. Learn all about VIP membership here.
How can I access the premium indicators?
To access the premium indicators, which are plug and play ready, sign up for VIP membership here.
Back
Top