2 states of these labels are still bothering me: "Bullish (decresing)" and "Bearish (increasing)". Do you guys think that instead of saying "Bullish (decreasing)", it can be "Decreasing" but change color from red to dark red, and it will be fine? I don't like the labels moving around when the text changes. Or, it won't be intuitive enough for all traders?
Repaints B4 Balanced BB Breakout For ThinkOrSwim
- Thread starter useThinkScript
- Start date
Repaints
- Status
The Bataylor
Member
I got a little too chicken at 7.5 points to keep going but it works great! I'm curious: has there been a developed consensus on whether the RSM painted bars are better than the Fibonacci bars, vice versa, or just personal preference?
I alternate between them. Haven't settled on a combo yet.
BTW, everyone, be aware that after adding the volume based study, this indicator doesn't work with SPX, etc. Same issue as InSync. However, I'm inclined to leave it in there for now.
I think every color should be isync with the MACDBB line.
DARK_GREEN for bullish and Falling
GREEN for bullish
CreateColor(0, 165, 0) for HYPER GREEN
DARK_RED for bearish and Rising
RED for bearish
(need to make a custom) for HYPER RED
ORANGE for mADX
LIGHT_GREY for neutral
YELLOW for squeeze
let me check that, thanks for the heads up. appreciate your comments.
Also will it be possible to get the code to add in the watchlist when the up arrow comes?
I've got the idea now that I have seen a couple examples thanks guys for posting them. I would also pick up the 2nd round drink tabAnd I'll pick up the drink tabThank you for making it easier and faster to clean up my signals area. The option to turn off labels makes that alignment of signals about 9pm stand out even more. About a half hour earlier, all 3 Balanced BB Breakout strategies were signaling a short but the signals popped at different times. I'm still testing, but it seems when the 3 strategies pop off a signal at about the same time, the move is greater.
Thanks again!
Everyone, after discussing with @Chuck with decided to make a few more changes. The latest beta addition of volume made it not work with indices since they don't have volume. In order to have this indicator with maximum compatibility, we decided to remove the volume study. May be it can be an add-on. Also, we noticed that there is a lot of correlation between the keltner channel based squeeze and the stochastic squeeze. It turns out the stochastic squeeze give you an earlier warning for squeeze. So, we are removing the keltner channels and replacing it with the latest "Scalper Squeeze". There are some colors and other small changes in this too.
Please let us know you feedback, and keep in mind that beta versions are for testing purposes until we finalize the changes.
Please let us know you feedback, and keep in mind that beta versions are for testing purposes until we finalize the changes.
Code:
# Balanced BB Breakout Indicator
# Free for use. Header credits must be included when any form of the code included in this package is used.
# User assumes all risk. Author not responsible for errors or use of tool.
# v1.2 - Assembled by Chuck Edwards
# v2.0 - Barbaros - cleanup
# v2.1 - Barbaros - added RSI IFT, NumberOfShares, BB crossing options
# v2.2 - Barbaros - fixed PnL issues and removed intraDay filter
# v2.3 - Barbaros - changed input and variable names, RSM is re-done
# v2.4 - Barbaros - removed PnL, added strategy signal arrows and alerts,
# added Fibonacci SuperTrend, added unified bar color selection
# beta - Chuck - added divergence and squeeze label, added squeeze alert
# Barbaros - cleanup, changed divergance to text, show stoch labels all the time
# Barbaros - added trend squeeze label for BB, added alerts for Stoch Scalper
# Barbaros - added options to hide clouds and labels
# Barbaros - changed trend and divergence colors and text to match
# Barbaros - removed volume and keltner channel studies, unified squeeze
declare lower;
input ShowMarketForecastLabel = yes;
input ShowMACDBBLabel = yes;
input ShowMACDBBCloud = yes;
input ShowRSMCloud = yes;
input ShowHMALabel = yes;
input ShowSTOCHSCALPERSqueezeLabel = yes;
input ShowSTOCHSCALPERSqueezeCloud = yes;
input ShowBullBearVerticalLines = yes;
### Market Forecast
def pIntermediate = MarketForecast().Intermediate;
AddLabel(ShowMarketForecastLabel,
"Market Forecast " +
if pIntermediate >= 80 then "Bullish" else
if pIntermediate <= 20 then "Bearish" else
if pIntermediate > pIntermediate[1] then "Rising" else
if pIntermediate < pIntermediate[1] then "Falling" else "Neutral",
if pIntermediate >= 80 then Color.GREEN else
if pIntermediate <= 20 then Color.RED else
if pIntermediate > pIntermediate[1] then Color.DARK_GREEN else
if pIntermediate < pIntermediate[1] then Color.DARK_RED else Color.GRAY
);
### MACDBB
input MACDBB_FastLength = 12;
input MACDBB_SlowLength = 26;
input MACDBB_Length = 25;
input MACDBB_BandLength = 15;
input MACDBB_NumDev = 1.0;
def MACDBB_Data = MACD(fastLength = MACDBB_FastLength, slowLength = MACDBB_SlowLength, MACDLength = MACDBB_Length);
plot MACDBB_Upper = reference BollingerBands(price = MACDBB_Data, length = MACDBB_BandLength,
Num_Dev_Dn = -MACDBB_NumDev, Num_Dev_Up = MACDBB_NumDev).UpperBand;
MACDBB_Upper.SetDefaultColor(Color.RED);
MACDBB_Upper.HideTitle();
MACDBB_Upper.HideBubble();
plot MACDBB_Lower = reference BollingerBands(price = MACDBB_Data, length = MACDBB_BandLength,
Num_Dev_Dn = -MACDBB_NumDev, Num_Dev_Up = MACDBB_NumDev).Lowerband;
MACDBB_Lower.SetDefaultColor(Color.GREEN);
MACDBB_Lower.HideTitle();
MACDBB_Lower.HideBubble();
plot MACDBB_Midline = reference BollingerBands(price = MACDBB_Data, length = MACDBB_BandLength,
Num_Dev_Dn = -MACDBB_NumDev, Num_Dev_Up = MACDBB_NumDev).MidLine;
MACDBB_Midline.SetDefaultColor(Color.LIGHT_RED);
MACDBB_Midline.SetStyle(Curve.FIRM);
MACDBB_MidLine.HideTitle();
MACDBB_MidLine.HideBubble();
plot MACDBB_Line = MACDBB_Data;
MACDBB_Line.AssignValueColor(
if MACDBB_Line > MACDBB_Line[1] and MACDBB_Line >= MACDBB_Upper then Color.GREEN
else if MACDBB_Line < MACDBB_Line[1] and MACDBB_Line >= MACDBB_Upper then Color.DARK_GREEN
else if MACDBB_Line < MACDBB_Line[1] and MACDBB_Line <= MACDBB_Lower then Color.RED else
if MACDBB_Line > MACDBB_Line[1] and MACDBB_Line <= MACDBB_Lower then Color.DARK_RED
else Color.GRAY
);
MACDBB_Line.SetLineWeight(1);
plot MACDBB_Dots = MACDBB_Data;
MACDBB_Dots.AssignValueColor(
if MACDBB_Line > MACDBB_Line[1] and MACDBB_Line > MACDBB_Upper then Color.GREEN
else if MACDBB_Line < MACDBB_Line[1] and MACDBB_Line > MACDBB_Upper then Color.DARK_GREEN
else if MACDBB_Line < MACDBB_Line[1] and MACDBB_Line < MACDBB_Lower then Color.RED
else if MACDBB_Line > MACDBB_Line[1] and MACDBB_Line < MACDBB_Lower then Color.DARK_RED
else Color.GRAY
);
MACDBB_Dots.SetPaintingStrategy(PaintingStrategy.LINE_VS_POINTS);
MACDBB_Dots.SetLineWeight(1);
MACDBB_Dots.HideTitle();
MACDBB_Dots.HideBubble();
input MACDBB_CrossFromAboveAlert = {default "Zero", "Lower", "Middle", "Upper"};
input MACDBB_CrossFromBelowAlert = {default "Zero", "Lower", "Middle", "Upper"};
def MACDBB_CrossFromAboveVal = if MACDBB_CrossFromAboveAlert == MACDBB_CrossFromAboveAlert.Lower then MACDBB_Lower
else if MACDBB_CrossFromAboveAlert == MACDBB_CrossFromAboveAlert.Upper then MACDBB_Upper
else 0;
def MACDBB_CrossFromBelowVal = if MACDBB_CrossFromBelowAlert == MACDBB_CrossFromBelowAlert.Lower then MACDBB_Lower
else if MACDBB_CrossFromBelowAlert == MACDBB_CrossFromBelowAlert.Upper then MACDBB_Upper
else 0;
def MACDBB_Buy = MACDBB_Data > MACDBB_Upper;
def MACDBB_Sell = MACDBB_Data <= MACDBB_Lower;
AddLabel(ShowMACDBBLabel,
"Trend " +
if MACDBB_Line > MACDBB_Line[1] and MACDBB_Line > MACDBB_Upper then "Bullish"
else if MACDBB_Line < MACDBB_Line[1] and MACDBB_Line > MACDBB_Upper then "Bullish (decreasing)"
else if MACDBB_Line < MACDBB_Line[1] and MACDBB_Line < MACDBB_Lower then "Bearish"
else if MACDBB_Line > MACDBB_Line[1] and MACDBB_Line < MACDBB_Lower then "Bearish (increasing)"
else "Neutral",
if MACDBB_Line > MACDBB_Line[1] and MACDBB_Line > MACDBB_Upper then Color.GREEN
else if MACDBB_Line < MACDBB_Line[1] and MACDBB_Line > MACDBB_Upper then Color.DARK_GREEN
else if MACDBB_Line < MACDBB_Line[1] and MACDBB_Line < MACDBB_Lower then Color.RED
else if MACDBB_Line > MACDBB_Line[1] and MACDBB_Line < MACDBB_Lower then Color.DARK_RED
else Color.GRAY
);
### Bollinger Bands
input BB_Length = 20;
input BB_NumDevDn = -2.0;
input BB_NumDevUp = 2.0;
input BB_AverageType = AverageType.SIMPLE;
def BB_SDev = StDev(data = close, length = BB_Length);
def BB_MidLine = MovingAverage(BB_AverageType, data = close, length = BB_Length);
def BB_LowerBand = BB_MidLine + BB_NumDevDn * BB_SDev;
def BB_UpperBand = BB_MidLine + BB_NumDevUp * BB_SDev;
# BB Cloud
AddCloud(if ShowMACDBBCloud then MACDBB_Upper else MACDBB_Lower, MACDBB_Lower, Color.LIGHT_RED);
### RSI/STOCASTIC/MACD CONFLUENCE COMBO
plot RSM_MACD_Diff = reference MACD("fast length" = 12, "slow length" = 26, "macd length" = 9).Diff;
RSM_MACD_Diff.SetDefaultColor(GetColor(5));
RSM_MACD_Diff.SetPaintingStrategy(PaintingStrategy.HISTOGRAM);
RSM_MACD_Diff.SetLineWeight(4);
RSM_MACD_Diff.DefineColor("Positive and Up", Color.GREEN);
RSM_MACD_Diff.DefineColor("Positive and Down", Color.DARK_GREEN);
RSM_MACD_Diff.DefineColor("Negative and Down", Color.RED);
RSM_MACD_Diff.DefineColor("Negative and Up", Color.DARK_RED);
RSM_MACD_Diff.AssignValueColor(
if RSM_MACD_Diff >= 0 then
if RSM_MACD_Diff > RSM_MACD_Diff[1] then RSM_MACD_Diff.Color("Positive and Up") else RSM_MACD_Diff.Color("Positive and Down")
else
if RSM_MACD_Diff < RSM_MACD_Diff[1] then RSM_MACD_Diff.Color("Negative and Down") else RSM_MACD_Diff.Color("Negative and Up")
);
plot RSM_MACD_ZeroLine = 0;
RSM_MACD_ZeroLine.SetDefaultColor(Color.RED);
RSM_MACD_ZeroLine.HideTitle();
RSM_MACD_ZeroLine.HideBubble();
def RSM_RSI = reference RSI(length = 7).RSI;
def RSM_Stoch_Val = 100 * (close - lowest(low, 14)) / (highest(high, 14) - lowest(low, 14));
def RSM_StochSlowK = SimpleMovingAvg(SimpleMovingAvg(RSM_Stoch_Val,3),3);
def RSM_rsiGreen = RSM_RSI >= 50;
def RSM_rsiRed = RSM_RSI < 50;
def RSM_stochGreen = RSM_StochSlowK >= 50;
def RSM_stochRed = RSM_StochSlowK < 50;
def RSM_macdGreen = RSM_MACD_Diff >= 0;
def RSM_macdRed = RSM_MACD_Diff < 0;
def RSM_Buy = RSM_rsiGreen and RSM_stochGreen and RSM_macdGreen;
def RSM_Sell = RSM_rsiRed and RSM_stochRed and RSM_macdRed;
# Shade areas based on criteria; adjust as needed
AddCloud(
if ShowRSMCloud and RSM_rsiGreen and RSM_stochGreen and RSM_macdGreen then Double.POSITIVE_INFINITY else Double.NaN,
if ShowRSMCloud and RSM_rsiGreen and RSM_stochGreen and RSM_macdGreen then Double.NEGATIVE_INFINITY else Double.NaN, Color.LIGHT_GREEN
);
AddCloud(
if ShowRSMCloud and RSM_rsiRed and RSM_stochRed and RSM_macdRed then Double.POSITIVE_INFINITY else Double.NaN,
if ShowRSMCloud and RSM_rsiRed and RSM_stochRed and RSM_macdRed then Double.NEGATIVE_INFINITY else Double.NaN, Color.LIGHT_RED
);
### Divergance
input HMA_Length = 55;
input HMA_Lookback = 2;
def HMA = HullMovingAvg(price = HL2, length = HMA_Length);
def HMA_delta = HMA[1] - HMA[HMA_Lookback + 1];
def HMA_delta_per_bar = HMA_delta / HMA_Lookback;
def HMA_next_bar = HMA[1] + HMA_delta_per_bar;
def HMA_concavity = if HMA > HMA_next_bar then 1 else -1;
def HMA_MA_Max = if HMA[-1] < HMA and HMA > HMA[1] then HMA else Double.NaN;
def HMA_MA_Min = if HMA[-1] > HMA and HMA < HMA[1] then HMA else Double.NaN;
def HMA_divergence = HMA - HMA_next_bar;
AddLabel(ShowHMALabel,
"Divergence " +
if HMA_concavity < 0 then
if HMA_divergence[1] > HMA_divergence then "Bearish (increasing)"
else "Bearish"
else
if HMA_divergence[1] < HMA_divergence then "Bullish (decreasing)"
else "Bullish",
if HMA_concavity < 0 then
if HMA_divergence[1] > HMA_divergence then Color.DARK_RED
else Color.RED
else
if HMA_divergence[1] < HMA_divergence then Color.DARK_GREEN
else Color.GREEN
);
### Stocastic Scalper
input STOCHSCALPER_Period = 21;
input STOCHSCALPER_PeriodEMA = 13;
input STOCHSCALPER_VolumePeriod = 60;
def STOCHSCALPER_oSS = (open[1] + close[1]) / 2;
def STOCHSCALPER_hSS = Max(high, close[1]);
def STOCHSCALPER_lSS = Min(low, close[1]);
def STOCHSCALPER_cSS = (STOCHSCALPER_oSS + STOCHSCALPER_hSS + STOCHSCALPER_lSS + close) / 4;
def STOCHSCALPER_r = Highest(STOCHSCALPER_hSS, STOCHSCALPER_Period) - Lowest(STOCHSCALPER_lSS, STOCHSCALPER_Period);
def STOCHSCALPER_p1 = (STOCHSCALPER_cSS - Lowest(STOCHSCALPER_lSS, STOCHSCALPER_Period)) / STOCHSCALPER_r;
def STOCHSCALPER_K = ExpAverage(STOCHSCALPER_p1, STOCHSCALPER_PeriodEMA);
def STOCHSCALPER_sSS = Highest(STOCHSCALPER_K, STOCHSCALPER_Period) - Lowest(STOCHSCALPER_K, STOCHSCALPER_Period);
def STOCHSCALPER_p3 = (STOCHSCALPER_K - Lowest(STOCHSCALPER_K, STOCHSCALPER_Period)) / STOCHSCALPER_sSS;
def STOCHSCALPER_D = ExpAverage(STOCHSCALPER_p3, STOCHSCALPER_PeriodEMA);
def STOCHSCALPER_Min = LowestAll(STOCHSCALPER_K);
def STOCHSCALPER_Max = HighestAll(STOCHSCALPER_K);
def STOCHSCALPER_mean = Average(STOCHSCALPER_cSS, 20);
def STOCHSCALPER_sd = StDev(STOCHSCALPER_cSS, 20);
def STOCHSCALPER_atr = Average(TrueRange(STOCHSCALPER_cSS, STOCHSCALPER_hSS, STOCHSCALPER_lSS), 20);
def STOCHSCALPER_squeeze = if (STOCHSCALPER_mean + (2 * STOCHSCALPER_sd)) < (STOCHSCALPER_mean + (1.5 * STOCHSCALPER_atr)) then yes else no;
def STOCHSCALPER_squeeze_signal = !STOCHSCALPER_squeeze[1] and STOCHSCALPER_squeeze;
AddCloud(if ShowSTOCHSCALPERSqueezeCloud and STOCHSCALPER_squeeze then MACDBB_Upper else Double.NaN,
if ShowSTOCHSCALPERSqueezeCloud and STOCHSCALPER_squeeze then MACDBB_Lower else Double.NaN, Color.YELLOW);
AddLabel(ShowSTOCHSCALPERSqueezeLabel, "Scalper Squeeze", if STOCHSCALPER_squeeze then Color.WHITE else Color.GRAY);
### Balance of Power
input BOP_EMA_Length = 20;
input BOP_TEMA_Length = 20;
def BOP_THL = If(high != low, high - low, 0.01);
def BOP_BullOpen = (high - open) / BOP_THL;
def BOP_BearOpen = (open - low) / BOP_THL;
def BOP_BullClose = (close - low) / BOP_THL;
def BOP_BearClose = (high - close) / BOP_THL;
def BOP_BullOC = If(close > open, (close - open) / BOP_THL, 0);
def BOP_BearOC = If(open > close, (open - close) / BOP_THL, 0);
def BOP_BullReward = (BOP_BullOpen + BOP_BullClose + BOP_BullOC) / 1;
def BOP_BearReward = (BOP_BearOpen + BOP_BearClose + BOP_BearOC) / 1;
def BOP_BOP = BOP_BullReward - BOP_BearReward;
def BOP_SmoothBOP = ExpAverage(BOP_BOP, BOP_EMA_Length);
def BOP_xPrice = BOP_SmoothBOP;
def BOP_xEMA1 = ExpAverage(BOP_SmoothBOP, BOP_TEMA_Length);
def BOP_xEMA2 = ExpAverage(BOP_xEMA1, BOP_TEMA_Length);
def BOP_xEMA3 = ExpAverage(BOP_xEMA2, BOP_TEMA_Length);
def BOP_nRes = 3 * BOP_xEMA1 - 3 * BOP_xEMA2 + BOP_xEMA3;
def BOP_SmootherBOP = BOP_nRes;
def BOP_s1 = BOP_SmoothBOP;
def BOP_s2 = BOP_SmootherBOP;
def BOP_s3 = BOP_SmootherBOP[2];
def BOP_Direction = if BarNumber() == 1 then 0
else if BOP_s2 < BOP_s3 and BOP_s2[1] > BOP_s3[1] then -1
else if BOP_s2 > BOP_s3 and BOP_s2[1] < BOP_s3[1] then 1
else BOP_Direction[1];
### RSI IFT
def RSI_IFT_R = reference RSI(5, close) - 50;
def RSI_IFT_AvgRSI = MovingAverage(AverageType.Exponential,RSI_IFT_R,9);
def RSI_IFT_InverseRSI = (Power(Double.E, 2 * RSI_IFT_AvgRSI) - 1) / (Power(Double.E, 2 * RSI_IFT_AvgRSI) + 1);
def RSI_IFT_Direction = if BarNumber() == 0 then 0
else if (RSI_IFT_InverseRSI[1] > 0) and (RSI_IFT_InverseRSI < 0) then -1
else if (RSI_IFT_InverseRSI > 0) and (RSI_IFT_InverseRSI[1] < 0) then 1
else RSI_IFT_Direction[1];
### Fibonacci SuperTrend
input FST_Length = 11;
input FST_Retrace = 23.6;
input FST_UseHighLow = yes;
def FST_h = if FST_UseHighLow then high else close;
def FST_l = if FST_UseHighLow then low else close;
def FST_minL = Lowest(FST_l, FST_Length);
def FST_maxH = Highest(FST_h, FST_Length);
def FST_hh = if FST_h > FST_maxH[1] then FST_h else FST_hh[1];
def FST_ll = if FST_l < FST_minL[1] then FST_l else FST_ll[1];
def FST_trend = if FST_h > FST_maxH[1] then 1 else if FST_l < FST_minL[1] then -1 else FST_trend[1];
def FST_Direction = if BarNumber() == 0 then 0
else if FST_trend != 1 then -1
else if FST_trend == 1 then 1
else FST_Direction[1];
### Bar Color
input BarColor = { "None", default "RSM", "FibonacciSuperTrend" };
AssignPriceColor(
if BarColor == BarColor.FibonacciSuperTrend then
if FST_trend == 1 then Color.GREEN else Color.RED
else if BarColor == BarColor.RSM then
if RSM_Buy then Color.GREEN
else if RSM_Sell then Color.RED
else Color.DARK_GRAY
else Color.CURRENT
);
### Strategy
input BullBear = { "BalanceOfPower", "FibonacciSuperTrend", default "RSI_IFT" };
def BullBear_Buy = if BullBear == BullBear.BalanceOfPower then BOP_Direction == 1
else if BullBear == BullBear.FibonacciSuperTrend then FST_Direction == 1
else if BullBear == BullBear.RSI_IFT then RSI_IFT_Direction == 1
else no;
def BullBear_Sell = if BullBear == BullBear.BalanceOfPower then BOP_Direction == -1
else if BullBear == BullBear.FibonacciSuperTrend then FST_Direction == -1
else if BullBear == BullBear.RSI_IFT then RSI_IFT_Direction == -1
else no;
AddVerticalLine(ShowBullBearVerticalLines and BullBear_Buy and !BullBear_Buy[1], close, Color.GREEN, Curve.SHORT_DASH);
AddVerticalLine(ShowBullBearVerticalLines and BullBear_Sell and !BullBear_Sell[1], close, Color.RED, Curve.SHORT_DASH);
def Strategy_Buy = BullBear_Buy and MACDBB_Buy and RSM_Buy;
def Strategy_Sell = BullBear_Sell and MACDBB_Sell and RSM_Sell;
def Strategy_BuySignal = Strategy_Buy and !Strategy_Buy[1];
def Strategy_SellSignal = Strategy_Sell and !Strategy_Sell[1];
plot BuyArrow = if Strategy_BuySignal then 0 else Double.NaN;
BuyArrow.SetPaintingStrategy(PaintingStrategy.ARROW_UP);
BuyArrow.SetDefaultColor(Color.WHITE);
BuyArrow.HideTitle();
BuyArrow.HideBubble();
plot SellArrow = if Strategy_SellSignal then 0 else Double.NaN;
SellArrow.SetPaintingStrategy(PaintingStrategy.ARROW_DOWN);
SellArrow.SetDefaultColor(Color.WHITE);
SellArrow.HideTitle();
SellArrow.HideBubble();
### Alerts
Alert(Strategy_BuySignal, "Long Entry", Alert.BAR, Sound.DING);
Alert(Strategy_SellSignal, "Short Entry", Alert.BAR, Sound.DING);
Alert(MACDBB_Line crosses above MACDBB_CrossFromAboveVal, "MACDBB Crossed Up", Alert.BAR, Sound.DING);
Alert(MACDBB_Line crosses below MACDBB_CrossFromBelowVal, "MACDBB Crossed Down", Alert.BAR, Sound.DING);
Alert(STOCHSCALPER_squeeze_signal, "Scalper Squeeze", Alert.BAR, Sound.DING);
Last edited:
Just updated main page. All latest beta versions will be placed at the bottom of the page and the newest releases will be placed at the top, with scanners and watchlist columns etc in the center. That way I can keep it straight.
The Bataylor
Member
Oh yes. Today has been CAKE compared to some recent days/weeks.
Good job! There has been some chop in lower time frames, but higher time frames work pretty good.
What timeframe did you trade on this morning?
The Bataylor
Member
I've been on 5-min all day while glancing at 4-tick Renko every now and then.
@Chuck I've been following this pretty closely and as far as the scanner goes their hasn't been any updates since it was posted?
This looks really good. How did you turn off the clouds and ribbons.
Joseph Patrick 18
Active member
What signals are you guys trading on? I've been finding good value with the dotted line changing to dark red/dark green as it's preceding my main intraday indicators by one bar at times. Found huge value today on the 1h chart, 15min chart and as additional confirmations on 1min, 3min and 5 min.
If you read back a few posts a couple of people posted how they traded with it. It helped me and get into a trade that if I had sold I could have locked in a few coins. But mine looks like it has room to grow so I'm just going to take it day by day....
There is a scan on the first page that has been their for a while now. It may need to be updated .....We haven’t focused on scans, watchlist columns or a complete trade system with upper because were really busy trying to perfect the lower indicator.
As time progresses and if we can get a little help from other members we MAY tackle all that but we need to get the lower indicator dialed in first.
Barbaros is amazingly fast at what he does, but he can’t work 24/7 on this.
I am extremely grateful for all the work that everyone here has contributed but it must be understood this is a process.
Rome wasn’t built in a day, but in a matter of 2 to 3 weeks we have a mighty spartan wielding his sword.
I had a great run this morning trade in the /ES....W/clear signals precise points of execution and I couldn’t of been happier (well maybe if I was trading 10 contracts)!
Road the pop, turned on point and raked in on the drop. Got out due to other projects goin on . But absolutely loved the clear concise signals, and I was even using a 2M chart.
Last edited:
- Status
New Indicator: Buy the Dip
Check out our Buy the Dip indicator and see how it can help you find profitable swing trading ideas. Scanner, watchlist columns, and add-ons are included.
| Thread starter | Similar threads | Forum | Replies | Date |
|---|---|---|---|---|
|
RedK Chop & Breakout Scout V2.0 for ThinkOrSwim | Indicators | 17 | |
| G | Potential Breakout (PBO) Indicator for ThinkorSwim | Indicators | 8 | |
|
ThinkorSwim Stock Breakout Scanner | Indicators | 11 | |
|
Potential Breakout Arrow Plots Indicator for ThinkorSwim | Indicators | 82 | |
| H | TOP Ultimate Breakout Indicator for ThinkorSwim | Indicators | 127 |
Similar threads
-
-
-
-
Potential Breakout Arrow Plots Indicator for ThinkorSwim
- Started by YungTraderFromMontana
- Replies: 82
-
Similar threads
-
-
-
-
Potential Breakout Arrow Plots Indicator for ThinkorSwim
- Started by YungTraderFromMontana
- Replies: 82
-
Similar threads
-
-
-
-
Potential Breakout Arrow Plots Indicator for ThinkorSwim
- Started by YungTraderFromMontana
- Replies: 82
-
The Market Trading Game Changer
Join 2,500+ subscribers inside the useThinkScript VIP Membership Club
- Exclusive indicators
- Proven strategies & setups
- Private Discord community
- ‘Buy The Dip’ signal alerts
- Exclusive members-only content
- Add-ons and resources
- 1 full year of unlimited support
Frequently Asked Questions
What is useThinkScript?
useThinkScript is the #1 community of stock market investors using indicators and other tools to power their trading strategies. Traders of all skill levels use our forums to learn about scripting and indicators, help each other, and discover new ways to gain an edge in the markets.
How do I get started?
We get it. Our forum can be intimidating, if not overwhelming. With thousands of topics, tens of thousands of posts, our community has created an incredibly deep knowledge base for stock traders. No one can ever exhaust every resource provided on our site.
If you are new, or just looking for guidance, here are some helpful links to get you started.
- The most viewed thread:
https://usethinkscript.com/threads/repainting-trend-reversal-for-thinkorswim.183/ - Our most popular indicator:
https://usethinkscript.com/threads/buy-the-dip-indicator-for-thinkorswim.3553/ - Answers to frequently asked questions:
https://usethinkscript.com/threads/answers-to-commonly-asked-questions.6006/
What are the benefits of VIP Membership?
VIP members get exclusive access to these proven and tested premium indicators: Buy the Dip, Advanced Market Moves 2.0, Take Profit, and Volatility Trading Range. In addition, VIP members get access to over 50 VIP-only custom indicators, add-ons, and strategies, private VIP-only forums, private Discord channel to discuss trades and strategies in real-time, customer support, trade alerts, and much more. Learn all about VIP membership here.
How can I access the premium indicators?
To access the premium indicators, which are plug and play ready, sign up for VIP membership here.