B3 Consolidation Box: Breakout / Breakdown Indicator for ThinkorSwim

Thanks @Mark-RO , I actually cut the original script down, getting rid of all the plots of H and L targets and painting strategies and am now able to scan for tickers that cross above the Balance Line within whatever bar timeframe I want.
 
Thanks @Mark-RO , I actually cut the original script down, getting rid of all the plots of H and L targets and painting strategies and am now able to scan for tickers that cross above the Balance Line within whatever bar timeframe I want.
Do you mind sharing that scan. Appreciate it
 
@tenacity11, here you go. This needs to be loaded as a Study first, then it can be used in the Scan Tab:
Ruby:
input BarsUsedForRange = 2;
input BarsRequiredToRemainInRange = 7;
input TargetMultiple = 0.5;
input ColorPrice = yes;
input HideTargets = no;
input HideBalance = no;
input HideBoxLines = no;
input HideCloud = no;
input HideLabels = no;

# Identify Consolidation

def HH = highest(high[1], BarsUsedForRange);
def LL = lowest(low[1], BarsUsedForRange);
def maxH = highest(hh, BarsRequiredToRemainInRange);
def maxL = lowest(ll, BarsRequiredToRemainInRange);
def HHn = if maxH == maxH[1] or maxL == maxL then maxH else HHn[1];
def LLn = if maxH == maxH[1] or maxL == maxL then maxL else LLn[1];
def Bh = if high <= HHn and HHn == HHn[1] then HHn else double.nan;
def Bl = if low >= LLn and LLn == LLn[1] then LLn else double.nan;
def CountH = if isnan(Bh) or isnan(Bl) then 2 else CountH[1] + 1;
def CountL = if isnan(Bh) or isnan(Bl) then 2 else CountL[1] + 1;
def ExpH = if barnumber() == 1 then double.nan else
if CountH[-BarsRequiredToRemainInRange] >= BarsRequiredToRemainInRange then HHn[-BarsRequiredToRemainInRange] else
if High <= ExpH[1] then ExpH[1] else double.nan;

def ExpL = if barnumber() == 1 then double.nan else
if Countl[-BarsRequiredToRemainInRange] >= BarsRequiredToRemainInRange then LLn[-BarsRequiredToRemainInRange] else
if Low >= ExpL[1] then ExpL[1] else double.nan;

# Plot the High and Low of the Box; Paint Cloud

def BoxHigh = if !isnan(expL) and !isnan(ExpH) then ExpH else double.nan;
def BoxLow = if !isnan(expL) and !isnan(ExpH) then ExpL else double.nan;


# Things to the Right of a Finished Box

def eH = if barnumber() == 1 then double.nan else if !isnan(BoxHigh[1]) and isnan(BoxHigh) then BoxHigh[1] else eh[1];
def eL = if barnumber() == 1 then double.nan else if !isnan(BoxLow[1]) and isnan(BoxLow) then BoxLow[1] else el[1];
def diff = (eh - el) * TargetMultiple;

plot Balance = if isnan(boxhigh) and isnan(boxlow) then (eh+el)/2 else double.nan;
 
Last edited:
@tenacity11, here you go. This needs to be loaded as a Study first, then it can be used in the Scan Tab:
Ruby:
input BarsUsedForRange = 2;
input BarsRequiredToRemainInRange = 7;
input TargetMultiple = 0.5;
input ColorPrice = yes;
input HideTargets = no;
input HideBalance = no;
input HideBoxLines = no;
input HideCloud = no;
input HideLabels = no;

# Identify Consolidation

def HH = highest(high[1], BarsUsedForRange);
def LL = lowest(low[1], BarsUsedForRange);
def maxH = highest(hh, BarsRequiredToRemainInRange);
def maxL = lowest(ll, BarsRequiredToRemainInRange);
def HHn = if maxH == maxH[1] or maxL == maxL then maxH else HHn[1];
def LLn = if maxH == maxH[1] or maxL == maxL then maxL else LLn[1];
def Bh = if high <= HHn and HHn == HHn[1] then HHn else double.nan;
def Bl = if low >= LLn and LLn == LLn[1] then LLn else double.nan;
def CountH = if isnan(Bh) or isnan(Bl) then 2 else CountH[1] + 1;
def CountL = if isnan(Bh) or isnan(Bl) then 2 else CountL[1] + 1;
def ExpH = if barnumber() == 1 then double.nan else
if CountH[-BarsRequiredToRemainInRange] >= BarsRequiredToRemainInRange then HHn[-BarsRequiredToRemainInRange] else
if High <= ExpH[1] then ExpH[1] else double.nan;

def ExpL = if barnumber() == 1 then double.nan else
if Countl[-BarsRequiredToRemainInRange] >= BarsRequiredToRemainInRange then LLn[-BarsRequiredToRemainInRange] else
if Low >= ExpL[1] then ExpL[1] else double.nan;

# Plot the High and Low of the Box; Paint Cloud

def BoxHigh = if !isnan(expL) and !isnan(ExpH) then ExpH else double.nan;
def BoxLow = if !isnan(expL) and !isnan(ExpH) then ExpL else double.nan;


# Things to the Right of a Finished Box

def eH = if barnumber() == 1 then double.nan else if !isnan(BoxHigh[1]) and isnan(BoxHigh) then BoxHigh[1] else eh[1];
def eL = if barnumber() == 1 then double.nan else if !isnan(BoxLow[1]) and isnan(BoxLow) then BoxLow[1] else el[1];
def diff = (eh - el) * TargetMultiple;

plot Balance = if isnan(boxhigh) and isnan(boxlow) then (eh+el)/2 else double.nan;
Just set the scan condition as: Balance is TRUE?!
 
Found this really interesting indicator for ThinkorSwim called B3 Consolidation Box that I wanted to share with everyone here.

Want to know if a stock is under consolidation? Well, this indicator is perfect for that. It basically highlights when a stock is consolidating and at which level it will be breaking down or breaking out. In addition, a stop loss level will be provided in case it's a false breakout/breakdown and target levels so you can know where to take profit.

Here are a few examples:

eMdcH7K.png


5t51NRr.png


voXgIWa.png


Notes:
  • Grey shadow box is your Consolidation box.
  • The white dotted line is Stop loss
  • Red lines are Profit Target Levels for Breakdown
  • Green lines are Profit Target Levels for Breakout
  • Use this indicator on the 5, 10, or 15 mins timeframe with Pre-market on.


thinkScript Code

Rich (BB code):
# B3 Consolidation Box   v1

# -- Automates a box and shows the breakouts via price color with targets based on the box's range.

# -- In a system the gray balance line would be your stop, or you may exit on any trip back within the old box range.

# -- The color of the candles does not tell you when to be long or short, it simply tells you the last signal given.

# -- You must manage your trade targets via your own profit protection tactics.

# Intended only for the use of the person(s) to who(m) this script was originally distributed.

# User of the script assumes all risk;

# The coder and the distributers are not responsible for any loss of capital incurred upon usage of this script.

# amalia added commentary after chatting more with B3 about the study:

# The first 2 inputs will need to be set for the chart you are looking at. What you want to find is the consolidation box settings that give you actionable targeting. If the price is shooting way past the tgt6 point, you need to lower the second input. The first input should likely be either 1, 2 or 3 only. Script is based on a strategy I learned from Ben's webcasts on TOS. He was doing some futurescast thing on consolidation boxes, and I had to see if I could make it work too. My Hypothesis is it is a great little scalper... you have to be willing to take singles and doubles and forget homers. He was trading ES

declare upper;

input BarsUsedForRange = 2;

input BarsRequiredToRemainInRange = 7;

input TargetMultiple = 0.5;

input ColorPrice = yes;

input HideTargets = no;

input HideBalance = no;

input HideBoxLines = no;

input HideCloud = no;

input HideLabels = no;

# Identify Consolidation

def HH = highest(high[1], BarsUsedForRange);

def LL = lowest(low[1], BarsUsedForRange);

def maxH = highest(hh, BarsRequiredToRemainInRange);

def maxL = lowest(ll, BarsRequiredToRemainInRange);

def HHn = if maxH == maxH[1] or maxL == maxL then maxH else HHn[1];

def LLn = if maxH == maxH[1] or maxL == maxL then maxL else LLn[1];

def Bh = if high <= HHn and HHn == HHn[1] then HHn else double.nan;

def Bl = if low >= LLn and LLn == LLn[1] then LLn else double.nan;

def CountH = if isnan(Bh) or isnan(Bl) then 2 else CountH[1] + 1;

def CountL = if isnan(Bh) or isnan(Bl) then 2 else CountL[1] + 1;

def ExpH = if barnumber() == 1 then double.nan else

            if CountH[-BarsRequiredToRemainInRange] >= BarsRequiredToRemainInRange then HHn[-BarsRequiredToRemainInRange] else

            if High <= ExpH[1] then ExpH[1] else double.nan;

def ExpL = if barnumber() == 1 then double.nan else

            if Countl[-BarsRequiredToRemainInRange] >= BarsRequiredToRemainInRange then LLn[-BarsRequiredToRemainInRange] else

            if Low >= ExpL[1] then ExpL[1] else double.nan;

# Plot the High and Low of the Box; Paint Cloud

plot BoxHigh = if !isnan(expL) and !isnan(ExpH) then ExpH else double.nan;

plot BoxLow = if !isnan(expL) and !isnan(ExpH) then ExpL else double.nan;

boxhigh.setdefaultColor(color.dark_green);

BoxHigh.setpaintingStrategy(paintingStrategy.HORIZONTAL);

BoxLow.setpaintingStrategy(paintingStrategy.HORIZONTAL);

BoxLow.setdefaultColor(color.dark_red);

BoxHigh.SETHIDING(HideBoxLines);

BoxLow.SETHIDING(HideBoxLines);

addcloud(if !HideCloud then BoxHigh else double.nan, BoxLow, color.gray, color.gray);

# Things to the Right of a Finished Box

def eH = if barnumber() == 1 then double.nan else if !isnan(BoxHigh[1]) and isnan(BoxHigh) then BoxHigh[1] else eh[1];

def eL = if barnumber() == 1 then double.nan else if !isnan(BoxLow[1]) and isnan(BoxLow) then BoxLow[1] else el[1];

def diff = (eh - el) * TargetMultiple;

plot Balance = if isnan(boxhigh) and isnan(boxlow) then (eh+el)/2 else double.nan;

plot Htgt_1 = if isnan(Boxhigh) and high >= eh then eh + diff else double.nan;

plot Htgt_2 = if isnan(Boxhigh) and high >= eh then eh + diff*2 else double.nan;

plot Htgt_3 = if isnan(Boxhigh) and high >= eh then eh + diff*3 else double.nan;

plot Htgt_4 = if isnan(Boxhigh) and high >= eh then eh + diff*4 else double.nan;

plot Htgt_5 = if isnan(Boxhigh) and high >= eh then eh + diff*5 else double.nan;

plot Htgt_6 = if isnan(Boxhigh) and high >= eh then eh + diff*6 else double.nan;

plot Ltgt_1 = if isnan(BoxLow) and Low <= eL then eL - diff else double.nan;

plot Ltgt_2 = if isnan(BoxLow) and Low <= eL then eL - diff*2 else double.nan;

plot Ltgt_3 = if isnan(BoxLow) and Low <= eL then eL - diff*3 else double.nan;

plot Ltgt_4 = if isnan(BoxLow) and Low <= eL then eL - diff*4 else double.nan;

plot Ltgt_5 = if isnan(BoxLow) and Low <= eL then eL - diff*5 else double.nan;

plot Ltgt_6 = if isnan(BoxLow) and Low <= eL then eL - diff*6 else double.nan;

Balance.SETHIDING(HideBalance);

Balance.setdefaultColor(CREATECOLOR(255,255,255));

Balance.setpaintingStrategy(PAIntingStrategy.SQUARES);

Htgt_2.setlineWeight(2);

Htgt_4.setlineWeight(2);

Htgt_6.setlineWeight(2);

Htgt_1.setdefaultColor(CREATECOLOR( 50, 100 , 75));

Htgt_1.setpaintingStrategy(PAIntingStrategy.DASHES);

Htgt_2.setdefaultColor(CREATECOLOR( 50, 100 , 75));

Htgt_2.setpaintingStrategy(paintingStrategy.HORIZONTAL);

Htgt_3.setdefaultColor(CREATECOLOR( 50, 100 , 75));

Htgt_3.setpaintingStrategy(PAIntingStrategy.DASHES);

Htgt_4.setdefaultColor(CREATECOLOR( 50, 100 , 75));

Htgt_4.setpaintingStrategy(paintingStrategy.HORIZONTAL);

Htgt_5.setdefaultColor(CREATECOLOR( 50, 100 , 75));

Htgt_5.setpaintingStrategy(PAIntingStrategy.DASHES);

Htgt_6.setdefaultColor(CREATECOLOR( 50, 100 , 75));

Htgt_6.setpaintingStrategy(paintingStrategy.HORIZONTAL);

Ltgt_2.setlineWeight(2);

Ltgt_4.setlineWeight(2);

Ltgt_6.setlineWeight(2);

Ltgt_1.setdefaultColor(CREATECOLOR( 100, 50 , 75));

Ltgt_1.setpaintingStrategy(PAIntingStrategy.DASHES);

Ltgt_2.setdefaultColor(CREATECOLOR( 100, 50 , 75));

Ltgt_2.setpaintingStrategy(paintingStrategy.HORIZONTAL);

Ltgt_3.setdefaultColor(CREATECOLOR( 100, 50 , 75));

Ltgt_3.setpaintingStrategy(PAIntingStrategy.DASHES);

Ltgt_4.setdefaultColor(CREATECOLOR( 100, 50 , 75));

Ltgt_4.setpaintingStrategy(paintingStrategy.HORIZONTAL);

Ltgt_5.setdefaultColor(CREATECOLOR( 100, 50 , 75));

Ltgt_5.setpaintingStrategy(PAIntingStrategy.DASHES);

Ltgt_6.setdefaultColor(CREATECOLOR( 100, 50 , 75));

Ltgt_6.setpaintingStrategy(paintingStrategy.HORIZONTAL);

Htgt_1.SETHIDING(HIDETARGETS);

Htgt_2.SETHIDING(HIDETARGETS);

Htgt_3.SETHIDING(HIDETARGETS);

Htgt_4.SETHIDING(HIDETARGETS);

Htgt_5.SETHIDING(HIDETARGETS);

Htgt_6.SETHIDING(HIDETARGETS);

Ltgt_1.SETHIDING(HIDETARGETS);

Ltgt_2.SETHIDING(HIDETARGETS);

Ltgt_3.SETHIDING(HIDETARGETS);

Ltgt_4.SETHIDING(HIDETARGETS);

Ltgt_5.SETHIDING(HIDETARGETS);

Ltgt_6.SETHIDING(HIDETARGETS);

# Labels

addlabel(!HideLabels, "TgtLvls = " + diff + "pts each | Bal = " + balance, if high > eh  and low < el then color.yellow else if high > eh then color.green else if low < el then color.red else color.gray);

addlabel(!HideLabels && high > eh && low < el, "OUTSIDE BAR!!", color.yellow);

addlabel(!HideLabels && high > eh && low >= el, "Long", color.green);

addlabel(!HideLabels && high <= eh && low < el, "Short", color.red);

#Price Color

assignPriceColor(if !ColorPrice then color.current else if !isnan(BoxHigh) then color.gray else

                    if high > eh  and low < el then color.yellow else

                    if high > eh then color.green else if low < el then color.red else color.gray);

Shareable Link

https://tos.mx/oPI7Kp

Video Tutorial

@BenTen - This script is not working for all tickers. The aggregation setup for my thinkorSwim is 1D 1M and enabled the extended hours chart as well still i dont see the same chart for all tickers. Any reason or am i missing something.

Please guide and thank you in advance.
 
@BenTen - This script is not working for all tickers. The aggregation setup for my thinkorSwim is 1D 1M and enabled the extended hours chart as well still i dont see the same chart for all tickers. Any reason or am i missing something.

Please guide and thank you in advance.
Unfortunately, many indicators do not perform well on 1min charts. And many indicators do not perform well with extended hours enabled.
Have you attempted using a higher timeframe and with extended hours disabled? That will help you narrow down where the issue is.

If you still have problems even w/ the above modifications. Please provide an example of the issue. Someone can at least look at it and either point you toward possible solutions or tell you that you are out of luck. Make sure that you provide enough information that we will be able to recreate the problem on our charts.
Unsure of how to upload screenshots to the forum, Here are directions.
 
@MerryDay First of all Happy thanks giving to you and every one in this form, you guys have helped me a ton during this learning process of trading.

I cleaned up the code from the first post to fit my need, it still plots Box High (green line), Box Low (red line) and Box Mid (white line). So what I want to know/figure out is how to calculate average ATR of the box.

Below is the chart for Costco on Daily time frame.
As you can see, the code plotted two consolidation boxes. I want to figure out how to calculate the average ATR of the candles WITHIN EACH of the box (two boxes = two separate ATR values, one for each box). I tried using bar count tutorial @XeoNoX provided under tutorial section but I still can't seem to figure it out.

Thank you so much for your help. Happy holidays,

XzWNquv.png

Code:
declare upper;

input BarsUsedForRange = 2;

input BarsRequiredToRemainInRange = 7;

input TargetMultiple = 0.5;

input ColorPrice = yes;

input HideTargets = no;

input HideBalance = no;

input HideBoxLines = no;

input HideCloud = no;

input HideLabels = no;

# Identify Consolidation

def HH = highest(high[1], BarsUsedForRange);

def LL = lowest(low[1], BarsUsedForRange);

def maxH = highest(hh, BarsRequiredToRemainInRange);

def maxL = lowest(ll, BarsRequiredToRemainInRange);

def HHn = if maxH == maxH[1] or maxL == maxL then maxH else HHn[1];

def LLn = if maxH == maxH[1] or maxL == maxL then maxL else LLn[1];

def Bh = if high <= HHn and HHn == HHn[1] then HHn else double.nan;

def Bl = if low >= LLn and LLn == LLn[1] then LLn else double.nan;

def CountH = if isnan(Bh) or isnan(Bl) then 2 else CountH[1] + 1;

def CountL = if isnan(Bh) or isnan(Bl) then 2 else CountL[1] + 1;

def ExpH = if barnumber() == 1 then double.nan else

            if CountH[-BarsRequiredToRemainInRange] >= BarsRequiredToRemainInRange then HHn[-BarsRequiredToRemainInRange] else

            if High <= ExpH[1] then ExpH[1] else double.nan;

def ExpL = if barnumber() == 1 then double.nan else

            if Countl[-BarsRequiredToRemainInRange] >= BarsRequiredToRemainInRange then LLn[-BarsRequiredToRemainInRange] else

            if Low >= ExpL[1] then ExpL[1] else double.nan;

# Plot the High and Low of the Box; Paint Cloud

plot BoxHigh = if !isnan(expL) and !isnan(ExpH) then ExpH else double.nan;

plot BoxLow = if !isnan(expL) and !isnan(ExpH) then ExpL else double.nan;

boxhigh.setdefaultColor(color.dark_green);

BoxHigh.setpaintingStrategy(paintingStrategy.HORIZONTAL);
boxhigh.setlineWeight(3);

BoxLow.setpaintingStrategy(paintingStrategy.HORIZONTAL);

BoxLow.setdefaultColor(color.dark_red);

BoxHigh.SETHIDING(HideBoxLines);

BoxLow.SETHIDING(HideBoxLines);
boxlow.setlineWeight(3);
addcloud(if !HideCloud then BoxHigh else double.nan, BoxLow, color.gray, color.gray);


# Things to the Right of a Finished Box

def eH = if barnumber() == 1 then double.nan else if !isnan(BoxHigh[1]) and isnan(BoxHigh) then BoxHigh[1] else eh[1];

def eL = if barnumber() == 1 then double.nan else if !isnan(BoxLow[1]) and isnan(BoxLow) then BoxLow[1] else el[1];

def diff = (eh - el) * TargetMultiple;

def Balance = if isnan(boxhigh) and isnan(boxlow) then (eh+el)/2 else double.nan;

plot IN = if boxhigh then boxlow<close<boxhigh else double.nan;

plot UP = if balance then close crosses above boxhigh[1]   else double.nan;
plot DWN = if balance then close crosses below boxlow[1]   else double.nan;

plot MID = if !isnan(expL) and !isnan(ExpH) then ((ExpH+expl)/2) else double.nan;
Mid.setdefaultColor(CREATECOLOR(255,255,255));
mid.setpaintingStrategy(PAIntingStrategy.SQUARES);
 
Last edited by a moderator:
@MerryDay First of all Happy thanks giving to you and every one in this form, you guys have helped me a ton during this learning process of trading.

I cleaned up the code from the first post to fit my need, it still plots Box High (green line), Box Low (red line) and Box Mid (white line). So what I want to know/figure out is how to calculate average ATR of the box.

Below is the chart for Costco on Daily time frame.
As you can see, the code plotted two consolidation boxes. I want to figure out how to calculate the average ATR of the candles WITHIN EACH of the box (two boxes = two separate ATR values, one for each box). I tried using bar count tutorial @XeoNoX provided under tutorial section but I still can't seem to figure it out.

Thank you so much for your help. Happy holidays,
That is beyond the scope and purpose of this indicator. You could start a new thread with the idea of creating a new indicator.
 
That is beyond the scope and purpose of this indicator. You could start a new thread with the idea of creating a new indicator.
No problem at all, i was able to figure out how to calcualte total bars inside the consolidation box but i am not able to figure out how to calculate ATR for those bar numbers. Maybe i thought there was an easier solution that I am not aware of but i guess there isnt an easier solution lol. no problem at all, i'll just do it manually. Thank you for your time none the less
 

B3 Consolidation Indicator REDONE for ThinkorSwim (Breakout / Breakdown Box)​

Shows an area of possible stock consolidation. It basically highlights when a stock is consolidating and at which level it will be breaking down or breaking out.


Code:
DEF   SUPPORT2 = low;
 DEF   MIN = Min(open, close);

declare upper;

input HideBalance = no;

input HideBoxLines = no;

input HideCloud = no;

input BarsUsedForRange = 5;

input BarsRequiredToRemainInRange = 7;

# Identify Consolidation

def MINMIN = lowest(MIN[1], BarsUsedForRange);

def SUPPORT2L = lowest(SUPPORT2[1], BarsUsedForRange);

def maxMIN = lowest(MINMIN, BarsRequiredToRemainInRange);

def maxSUPPORT2 = lowest(SUPPORT2L, BarsRequiredToRemainInRange);

def MINn = if maxMIN == maxMIN[1] or maxSUPPORT2 == maxSUPPORT2 then maxMIN else MINn[1];

def SUPPORT2n = if maxMIN == maxMIN[1] or maxSUPPORT2 == maxSUPPORT2 then maxSUPPORT2 else SUPPORT2n[1];

def Bh = if MIN >= MINn and MINn == MINn[1] then MINn else double.nan;

def Bl = if SUPPORT2 >= SUPPORT2n and SUPPORT2n == SUPPORT2n[1] then SUPPORT2n else double.nan;


def CountH = if isnan(Bh) or isnan(Bl) then 2 else CountH[1] + 1;

def CountL = if isnan(Bh) or isnan(Bl) then 2 else CountL[1] + 1;

def ExpH = if barnumber() == 1 then double.nan else

            if CountH[-BarsRequiredToRemainInRange] >= BarsRequiredToRemainInRange then MINn[-BarsRequiredToRemainInRange] else

            if MIN >= ExpH[1] then ExpH[1] else double.nan;

def ExpL = if barnumber() == 1 then double.nan else

            if Countl[-BarsRequiredToRemainInRange] >= BarsRequiredToRemainInRange then SUPPORT2n[-BarsRequiredToRemainInRange] else

            if SUPPORT2 >= ExpL[1] then ExpL[1] else double.nan;

# Plot the High and Low of the Box; Paint Cloud

plot BoxHigh = if !isnan(expL) and !isnan(ExpH) then ExpH else double.nan;

plot BoxLow = if !isnan(expL) and !isnan(ExpH) then ExpL else double.nan;

boxhigh.setdefaultColor(color.dark_RED);

BoxHigh.setpaintingStrategy(paintingStrategy.HORIZONTAL);

BoxLow.setpaintingStrategy(paintingStrategy.HORIZONTAL);

BoxLow.setdefaultColor(color.LIGHT_GREEN );

BoxHigh.SETHIDING(HideBoxLines);

BoxLow.SETHIDING(HideBoxLines);
BOXHigh.SetLineWeight(3);
BOXLOW.SetLineWeight(3);
addcloud(if !HideCloud then BoxHigh else double.nan, BoxLow, color.LIGHT_GREEN , color.LIGHT_GREEN );

# Things to the Right of a Finished Box

def eH = if barnumber() == 1 then double.nan else if !isnan(BoxHigh[1]) and isnan(BoxHigh) then BoxHigh[1] else eh[1];

def eL = if barnumber() == 1 then double.nan else if !isnan(BoxLow[1]) and isnan(BoxLow) then BoxLow[1] else el[1];

plot Balance = if isnan(boxhigh) and isnan(boxlow) then (eh+el)/2 else double.nan;

Balance.SETHIDING(HideBalance);

Balance.setdefaultColor(COLOR.LIGHT_GREEN );

Balance.setpaintingStrategy(PAIntingStrategy.SQUARES);

plot RH = (balance *2)-el  ;
plot RL =  (balance *2)-eh  ;



addcloud(if !HideCloud then rh else double.nan, rl, color.GRAY, color.GRAY);


rh.setdefaultColor(color.DARK_red);
rh.setpaintingStrategy(paintingStrategy.HORIZONTAL);
rl.setdefaultColor(color.DARK_green);
rl.setpaintingStrategy(paintingStrategy.HORIZONTAL);
RH.SetLineWeight(3);
RL.SetLineWeight(3);


##############################################################

 DEF   H = high;
 DEF   max = Max(open, close);


# Identify Consolidation

def HH1 = highest(h[1], BarsUsedForRange);
def LL1 = highest(max[1], BarsUsedForRange);
def maxH1 = highest(hh1, BarsRequiredToRemainInRange);
def maxL1 = highest(ll1, BarsRequiredToRemainInRange);

def HHn1 = if maxH1 == maxH1[1] or maxL1 == maxL1 then maxH1 else HHn1[1];

def LLn1 = if maxH1 == maxH1[1] or maxL1 == maxL1 then maxL1 else LLn1[1];

def Bh1 = if h <= HHn1 and HHn1 == HHn1[1] then HHn1 else double.nan;

def Bl1 = if max <= LLn1 and LLn1 == LLn1[1] then LLn1 else double.nan;

def CountH1 = if isnan(Bh1) or isnan(Bl1) then 2 else CountH1[1] + 1;

def CountL1 = if isnan(Bh1) or isnan(Bl1) then 2 else CountL1[1] + 1;

def ExpH1 = if barnumber() == 1 then double.nan else

            if CountH1[-BarsRequiredToRemainInRange] >= BarsRequiredToRemainInRange then HHn1[-BarsRequiredToRemainInRange] else

            if H <= ExpH1[1] then ExpH1[1] else double.nan;

def ExpL1 = if barnumber() == 1 then double.nan else

            if Countl1[-BarsRequiredToRemainInRange] >= BarsRequiredToRemainInRange then LLn1[-BarsRequiredToRemainInRange] else

            if max <= ExpL1[1] then ExpL1[1] else double.nan;


# Plot the High and Low of the Box; Paint Cloud

plot BoxHigh1 = if !isnan(expL1) and !isnan(ExpH1) then ExpH1 else double.nan;


plot BoxLow1 = if !isnan(expL1) and !isnan(ExpH1) then ExpL1 else double.nan;

boxhigh1.setdefaultColor(color.dark_RED);

BoxHigh1.setpaintingStrategy(paintingStrategy.HORIZONTAL);

BoxLow1.setpaintingStrategy(paintingStrategy.HORIZONTAL);

BoxLow1.setdefaultColor(color.dark_GREEN);

BoxHigh1.SETHIDING(HideBoxLines);

BoxLow1.SETHIDING(HideBoxLines);
BOXHigh1.SetLineWeight(3);
BOXLOW1.SetLineWeight(3);
addcloud(if !HideCloud then BoxHigh1 else double.nan, BoxLow1, color.pink, color.pink);

# Things to the Right of a Finished Box

def eH1 = if barnumber() == 1 then double.nan else if !isnan(BoxHigh1[1]) and isnan(BoxHigh1) then BoxHigh1[1] else eh1[1];

def eL1 = if barnumber() == 1 then double.nan else if !isnan(BoxLow1[1]) and isnan(BoxLow1) then BoxLow1[1] else el1[1];


plot Balance1 = if isnan(boxhigh1) and isnan(boxlow1) then (eh1+el1)/2 else double.nan;

Balance1.SETHIDING(HideBalance);

Balance1.setdefaultColor(COLOR.PINK);

Balance1.setpaintingStrategy(PAIntingStrategy.SQUARES);

plot RH1 = (balance1 *2)-el1  ;
plot RL1 =  (balance1 *2)-eh1  ;



addcloud(if !HideCloud then rh1 else double.nan, rl1, color.GRAY, color.GRAY);


rh1.setdefaultColor(color.DARK_red);
rh1.setpaintingStrategy(paintingStrategy.HORIZONTAL);
rl1.setdefaultColor(color.DARK_green);
rl1.setpaintingStrategy(paintingStrategy.HORIZONTAL);
RH1.SetLineWeight(3);
RL1.SetLineWeight(3);
 
B3 Consolidation Indicator REDONE for ThinkorSwim (Breakout / Breakdown Box)
Shows an area of possible stock consolidation. It basically highlights when a stock is consolidating and at which level it will be breaking down or breaking out.
Is it possible scan when price is breaking out from the box?
 
B3 Consolidation Indicator REDONE for ThinkorSwim (Breakout / Breakdown Box)
Shows an area of possible stock consolidation. It basically highlights when a stock is consolidating and at which level it will be breaking down or breaking out.


Code:
DEF   SUPPORT2 = low;
 DEF   MIN = Min(open, close);

declare upper;

input HideBalance = no;

input HideBoxLines = no;

input HideCloud = no;

input BarsUsedForRange = 5;

input BarsRequiredToRemainInRange = 7;

# Identify Consolidation

def MINMIN = lowest(MIN[1], BarsUsedForRange);

def SUPPORT2L = lowest(SUPPORT2[1], BarsUsedForRange);

def maxMIN = lowest(MINMIN, BarsRequiredToRemainInRange);

def maxSUPPORT2 = lowest(SUPPORT2L, BarsRequiredToRemainInRange);

def MINn = if maxMIN == maxMIN[1] or maxSUPPORT2 == maxSUPPORT2 then maxMIN else MINn[1];

def SUPPORT2n = if maxMIN == maxMIN[1] or maxSUPPORT2 == maxSUPPORT2 then maxSUPPORT2 else SUPPORT2n[1];

def Bh = if MIN >= MINn and MINn == MINn[1] then MINn else double.nan;

def Bl = if SUPPORT2 >= SUPPORT2n and SUPPORT2n == SUPPORT2n[1] then SUPPORT2n else double.nan;


def CountH = if isnan(Bh) or isnan(Bl) then 2 else CountH[1] + 1;

def CountL = if isnan(Bh) or isnan(Bl) then 2 else CountL[1] + 1;

def ExpH = if barnumber() == 1 then double.nan else

            if CountH[-BarsRequiredToRemainInRange] >= BarsRequiredToRemainInRange then MINn[-BarsRequiredToRemainInRange] else

            if MIN >= ExpH[1] then ExpH[1] else double.nan;

def ExpL = if barnumber() == 1 then double.nan else

            if Countl[-BarsRequiredToRemainInRange] >= BarsRequiredToRemainInRange then SUPPORT2n[-BarsRequiredToRemainInRange] else

            if SUPPORT2 >= ExpL[1] then ExpL[1] else double.nan;

# Plot the High and Low of the Box; Paint Cloud

plot BoxHigh = if !isnan(expL) and !isnan(ExpH) then ExpH else double.nan;

plot BoxLow = if !isnan(expL) and !isnan(ExpH) then ExpL else double.nan;

boxhigh.setdefaultColor(color.dark_RED);

BoxHigh.setpaintingStrategy(paintingStrategy.HORIZONTAL);

BoxLow.setpaintingStrategy(paintingStrategy.HORIZONTAL);

BoxLow.setdefaultColor(color.LIGHT_GREEN );

BoxHigh.SETHIDING(HideBoxLines);

BoxLow.SETHIDING(HideBoxLines);
BOXHigh.SetLineWeight(3);
BOXLOW.SetLineWeight(3);
addcloud(if !HideCloud then BoxHigh else double.nan, BoxLow, color.LIGHT_GREEN , color.LIGHT_GREEN );

# Things to the Right of a Finished Box

def eH = if barnumber() == 1 then double.nan else if !isnan(BoxHigh[1]) and isnan(BoxHigh) then BoxHigh[1] else eh[1];

def eL = if barnumber() == 1 then double.nan else if !isnan(BoxLow[1]) and isnan(BoxLow) then BoxLow[1] else el[1];

plot Balance = if isnan(boxhigh) and isnan(boxlow) then (eh+el)/2 else double.nan;

Balance.SETHIDING(HideBalance);

Balance.setdefaultColor(COLOR.LIGHT_GREEN );

Balance.setpaintingStrategy(PAIntingStrategy.SQUARES);

plot RH = (balance *2)-el  ;
plot RL =  (balance *2)-eh  ;



addcloud(if !HideCloud then rh else double.nan, rl, color.GRAY, color.GRAY);


rh.setdefaultColor(color.DARK_red);
rh.setpaintingStrategy(paintingStrategy.HORIZONTAL);
rl.setdefaultColor(color.DARK_green);
rl.setpaintingStrategy(paintingStrategy.HORIZONTAL);
RH.SetLineWeight(3);
RL.SetLineWeight(3);


##############################################################

 DEF   H = high;
 DEF   max = Max(open, close);


# Identify Consolidation

def HH1 = highest(h[1], BarsUsedForRange);
def LL1 = highest(max[1], BarsUsedForRange);
def maxH1 = highest(hh1, BarsRequiredToRemainInRange);
def maxL1 = highest(ll1, BarsRequiredToRemainInRange);

def HHn1 = if maxH1 == maxH1[1] or maxL1 == maxL1 then maxH1 else HHn1[1];

def LLn1 = if maxH1 == maxH1[1] or maxL1 == maxL1 then maxL1 else LLn1[1];

def Bh1 = if h <= HHn1 and HHn1 == HHn1[1] then HHn1 else double.nan;

def Bl1 = if max <= LLn1 and LLn1 == LLn1[1] then LLn1 else double.nan;

def CountH1 = if isnan(Bh1) or isnan(Bl1) then 2 else CountH1[1] + 1;

def CountL1 = if isnan(Bh1) or isnan(Bl1) then 2 else CountL1[1] + 1;

def ExpH1 = if barnumber() == 1 then double.nan else

            if CountH1[-BarsRequiredToRemainInRange] >= BarsRequiredToRemainInRange then HHn1[-BarsRequiredToRemainInRange] else

            if H <= ExpH1[1] then ExpH1[1] else double.nan;

def ExpL1 = if barnumber() == 1 then double.nan else

            if Countl1[-BarsRequiredToRemainInRange] >= BarsRequiredToRemainInRange then LLn1[-BarsRequiredToRemainInRange] else

            if max <= ExpL1[1] then ExpL1[1] else double.nan;


# Plot the High and Low of the Box; Paint Cloud

plot BoxHigh1 = if !isnan(expL1) and !isnan(ExpH1) then ExpH1 else double.nan;


plot BoxLow1 = if !isnan(expL1) and !isnan(ExpH1) then ExpL1 else double.nan;

boxhigh1.setdefaultColor(color.dark_RED);

BoxHigh1.setpaintingStrategy(paintingStrategy.HORIZONTAL);

BoxLow1.setpaintingStrategy(paintingStrategy.HORIZONTAL);

BoxLow1.setdefaultColor(color.dark_GREEN);

BoxHigh1.SETHIDING(HideBoxLines);

BoxLow1.SETHIDING(HideBoxLines);
BOXHigh1.SetLineWeight(3);
BOXLOW1.SetLineWeight(3);
addcloud(if !HideCloud then BoxHigh1 else double.nan, BoxLow1, color.pink, color.pink);

# Things to the Right of a Finished Box

def eH1 = if barnumber() == 1 then double.nan else if !isnan(BoxHigh1[1]) and isnan(BoxHigh1) then BoxHigh1[1] else eh1[1];

def eL1 = if barnumber() == 1 then double.nan else if !isnan(BoxLow1[1]) and isnan(BoxLow1) then BoxLow1[1] else el1[1];


plot Balance1 = if isnan(boxhigh1) and isnan(boxlow1) then (eh1+el1)/2 else double.nan;

Balance1.SETHIDING(HideBalance);

Balance1.setdefaultColor(COLOR.PINK);

Balance1.setpaintingStrategy(PAIntingStrategy.SQUARES);

plot RH1 = (balance1 *2)-el1  ;
plot RL1 =  (balance1 *2)-eh1  ;



addcloud(if !HideCloud then rh1 else double.nan, rl1, color.GRAY, color.GRAY);


rh1.setdefaultColor(color.DARK_red);
rh1.setpaintingStrategy(paintingStrategy.HORIZONTAL);
rl1.setdefaultColor(color.DARK_green);
rl1.setpaintingStrategy(paintingStrategy.HORIZONTAL);
RH1.SetLineWeight(3);
RL1.SetLineWeight(3);
Would it be possible for you to add alerts when it breaks please! Thank you :)
 
Last edited by a moderator:
Hi Ben, I found your b3 indicator after having watched this video:
At the very least the video shines a light on how to trade contractions or consolidation boxes. The presenter shows in detail the 3 phases of the market and how to profit. He is a Forex trader but his concepts are good for all markets.

Please give it a try:

@3AMBH are you using this strategy? the video was interesting for sure, never looked at the market like this. how are you using the strategy?
 
@Playstation As requested here is B3 Consolidation Box with all lines removed. Only the grey consolidation box remains
Load this study on a 5 minute chart of /ES and you 'll see all the consolidation boxes displayed

Code:
# Consolidation Box Barebones - with Grey Consolidation Box
# tomsk
# 11.23.2019

# As requested by Playstation, this is B3 Consolidation Box with all lines removed
# Only the grey consolidation box remains

# B3 Consolidation Box
# Hammond B3
# 2.2.2019

input BarsUsedForRange = 2;
input BarsRequiredToRemainInRange = 7;
input ColorPrice = yes;
input HideBoxLines = no;
input HideLabels = no;

# Identify Consolidation
def HH = highest(high[1], BarsUsedForRange);
def LL = lowest(low[1], BarsUsedForRange);
def maxH = highest(hh, BarsRequiredToRemainInRange);
def maxL = lowest(ll, BarsRequiredToRemainInRange);
def HHn = if maxH == maxH[1] or maxL == maxL then maxH else HHn[1];
def LLn = if maxH == maxH[1] or maxL == maxL then maxL else LLn[1];
def Bh = if high <= HHn and HHn == HHn[1] then HHn else double.nan;
def Bl = if low >= LLn and LLn == LLn[1] then LLn else double.nan;
def CountH = if isnan(Bh) or isnan(Bl) then 2 else CountH[1] + 1;
def CountL = if isnan(Bh) or isnan(Bl) then 2 else CountL[1] + 1;

def ExpH = if barnumber() == 1 then double.nan 
           else if CountH[-BarsRequiredToRemainInRange] >= BarsRequiredToRemainInRange then HHn[-BarsRequiredToRemainInRange] 
           else if High <= ExpH[1] then ExpH[1] 
           else double.nan;

def ExpL = if barnumber() == 1 then double.nan 
           else if Countl[-BarsRequiredToRemainInRange] >= BarsRequiredToRemainInRange then LLn[-BarsRequiredToRemainInRange] 
           else if Low >= ExpL[1] then ExpL[1] else double.nan;

# Plot the High and Low of the Box; Paint Cloud
plot BoxHigh = if !isnan(expL) and !isnan(ExpH) then ExpH else double.nan;
     boxhigh.setdefaultColor(color.dark_green);
     BoxHigh.setpaintingStrategy(paintingStrategy.HORIZONTAL);
     BoxHigh.SETHIDING(HideBoxLines);

plot BoxLow = if !isnan(expL) and !isnan(ExpH) then ExpL else double.nan;
     BoxLow.setpaintingStrategy(paintingStrategy.HORIZONTAL);
     BoxLow.setdefaultColor(color.dark_red);
     BoxLow.SETHIDING(HideBoxLines);

addcloud(BoxHigh, BoxLow, color.gray, color.gray);

# Things to the Right of a Finished Box
def eH = if barnumber() == 1 then double.nan else if !isnan(BoxHigh[1]) and isnan(BoxHigh) then BoxHigh[1] else eh[1];
def eL = if barnumber() == 1 then double.nan else if !isnan(BoxLow[1]) and isnan(BoxLow) then BoxLow[1] else el[1];

assignPriceColor(if !ColorPrice then color.current else if !isnan(BoxHigh) then color.gray else
                    if high > eh  and low < el then color.yellow else 
                    if high > eh then color.green else if low < el then color.red else color.gray);
# Consolidation Box Barebones
@tomsk can you add back the stop loss line that is on the original study? Maybe just make it optional. Its nice to have for visual reference.
 
Thanks @Mark-RO , I actually cut the original script down, getting rid of all the plots of H and L targets and painting strategies and am now able to scan for tickers that cross above the Balance Line within whatever bar timeframe I want.
@Jonas J so now when you scan are the stocks more current and not the ones that are days and weeks out like the original scan?
 

Join useThinkScript to post your question to a community of 21,000+ developers and traders.

Similar threads

Not the exact question you're looking for?

Start a new thread and receive assistance from our community.

87k+ Posts
311 Online
Create Post

Similar threads

Similar threads

The Market Trading Game Changer

Join 2,500+ subscribers inside the useThinkScript VIP Membership Club
  • Exclusive indicators
  • Proven strategies & setups
  • Private Discord community
  • ‘Buy The Dip’ signal alerts
  • Exclusive members-only content
  • Add-ons and resources
  • 1 full year of unlimited support

Frequently Asked Questions

What is useThinkScript?

useThinkScript is the #1 community of stock market investors using indicators and other tools to power their trading strategies. Traders of all skill levels use our forums to learn about scripting and indicators, help each other, and discover new ways to gain an edge in the markets.

How do I get started?

We get it. Our forum can be intimidating, if not overwhelming. With thousands of topics, tens of thousands of posts, our community has created an incredibly deep knowledge base for stock traders. No one can ever exhaust every resource provided on our site.

If you are new, or just looking for guidance, here are some helpful links to get you started.

What are the benefits of VIP Membership?
VIP members get exclusive access to these proven and tested premium indicators: Buy the Dip, Advanced Market Moves 2.0, Take Profit, and Volatility Trading Range. In addition, VIP members get access to over 50 VIP-only custom indicators, add-ons, and strategies, private VIP-only forums, private Discord channel to discuss trades and strategies in real-time, customer support, trade alerts, and much more. Learn all about VIP membership here.
How can I access the premium indicators?
To access the premium indicators, which are plug and play ready, sign up for VIP membership here.
Back
Top