Sector Histogram

W

woulf1004

Active member
Hi All,

I have made slight changes to add markets of interest for quick over view. Now that we have the SPX, NDX, DJI, COMP and RUT. Can someone create a lower single indicator that plots a histogram for these markets that has a zero line? Plot bullish in color green if is above zero or red when bearish when it's below zero. This zero line should also change colors based on bullish or bearish sentiment.

Code: 
# S&P 500 Sector Performance (Percentage)
# Paris
# 4.12.2018
# After reviewing chubbyboy's S&P sector study, I thought it might
# be a good idea to display labels of relative S&P sector performance
# in percentages. At one glance this will enable us to determine
# which sectors are happening and which are not. Decided to use a
# script() to retrieve the data. Also, I changed the formula slightly.
# The percentage displayed is the current price as a percentage over
# yesterday's closing rather than the open today as was used in chubbyboy's
# study.
#====== Further Modified by Killing Hours ======#
# 5/4/2020 #
# Added Color Mapping #
# to distinguish more suddle movements #
#===============================================#
#Modified slightly by Headhunter20.


######################################################################################
script Sector {
input symb = "SPX";
def c = close(symbol = symb, period = AggregationPeriod.day);
def PctChg = (c / c[1]) - 1;
plot pct = PctChg;
}

#Define the color map. Change as you see fit
DefineGlobalColor("VeryGood", CreateColor(4, 216, 22));
DefineGlobalColor("Good", CreateColor(46, 216, 4));
DefineGlobalColor("ModGood", CreateColor(121, 216, 4));
DefineGlobalColor("SlightlyGood", CreateColor(167, 216, 4));
DefineGlobalColor("SluggishGood", CreateColor(210,252,126));
DefineGlobalColor("Neutral", CreateColor(252, 231, 126));
DefineGlobalColor("SluggishBad", CreateColor(252,168,126));
DefineGlobalColor("SlightlyBad", CreateColor(216, 163, 4));
DefineGlobalColor("ModBad", CreateColor(216, 117, 4));
DefineGlobalColor("Bad", CreateColor(216, 43, 4));
DefineGlobalColor("VeryBad", CreateColor(216, 4, 4));

# SPX Overall
def SPX = Sector("SPX");
def spxPer = round(SPX,4) * 100;
def CurrSP = +close("SPX", period = AggregationPeriod.DAY);
def ChangeSP = CurrSP - CurrSP[1];

addLabel(1, "S&P500: "+ CurrSP + " Chg: " + ChangeSP + "  (" + spxPer + "%" + ")   ", if ChangeSP > 0 then color.cyan else if ChangeSP < 0 then color.gray else if spxPer > 0 then COLOR.CYAN else color.gray);

# Energy Sector
def Energy = Sector("$SP500#10");
def engPer = round(Energy,4) * 100;
AddLabel(
1,
"Energy: "+engPer+"% XLE #10",
if engPer > 1.50 then GlobalColor("VeryGood") else
if engPer > 1 && engPer <= 1.50 then GlobalColor("Good") else
if engPer > .5 && engPer <= 1 then GlobalColor("ModGood") else
if engPer > .25 && engPer <= .5 then GlobalColor("SlightlyGood") else
if engPer > 0 && engPer <= .25 then GlobalColor("SluggishGood") else
if engPer == 0 then GlobalColor("Neutral") else
if engPer < 0 && engPer >= -.25 then GlobalColor("SluggishBad") else
if engPer < -.25 && engPer >= -.5 then GlobalColor("SlightlyBad") else
if engPer < -.5 && engPer >= -1 then GlobalColor("ModBad") else
if engPer < -1 && engPer >= -1.50 then GlobalColor("Bad") else
if engPer < -1.50 then GlobalColor("VeryBad") else
Color.black
);

# Consumer Discretionary Spending Sector
def ConDisr = Sector("$SP500#25");
def conDPer = round(ConDisr,4);
AddLabel(
1,
"Con. Discretionary: "+conDPer+"% XLY #25",
if conDPer > 1.50 then GlobalColor("VeryGood") else
if conDPer > 1 && conDPer <= 1.50 then GlobalColor("Good") else
if conDPer > .5 && conDPer <= 1 then GlobalColor("ModGood") else
if conDPer > .25 && conDPer <= .5 then GlobalColor("SlightlyGood") else
if conDPer > 0 && conDPer <= .25 then GlobalColor("SluggishGood") else
if conDPer == 0 then GlobalColor("Neutral") else
if conDPer < 0 && conDPer >= -.25 then GlobalColor("SluggishBad") else
if conDPer < -.25 && conDPer >= -.5 then GlobalColor("SlightlyBad") else
if conDPer < -.5 && conDPer >= -1 then GlobalColor("ModBad") else
if conDPer < -1 && conDPer >= -1.50 then GlobalColor("Bad") else
if conDPer < -1.50 then GlobalColor("VeryBad") else
Color.black
);

# Financial Sector
def Finance = Sector("$SP500#40");
def finPer = round(Finance,4) * 100;
AddLabel(
1,
"Financials: "+finPer+"% XLF #40",
if finPer > 1.50 then GlobalColor("VeryGood") else
if finPer > 1 && finPer <= 1.50 then GlobalColor("Good") else
if finPer > .5 && finPer <= 1 then GlobalColor("ModGood") else
if finPer > .25 && finPer <= .5 then GlobalColor("SlightlyGood") else
if finPer > 0 && finPer <= .25 then GlobalColor("SluggishGood") else
if finPer == 0 then GlobalColor("Neutral") else
if finPer < 0 && finPer >= -.25 then GlobalColor("SluggishBad") else
if finPer < -.25 && finPer >= -.5 then GlobalColor("SlightlyBad") else
if finPer < -.5 && finPer >= -1 then GlobalColor("ModBad") else
if finPer < -1 && finPer >= -1.50 then GlobalColor("Bad") else
if finPer < -1.50 then GlobalColor("VeryBad") else
Color.black
);

# Utilities Sector
def Utilities = Sector("$SP500#55");
def utiPer = round(Utilities,4) * 100;
AddLabel(
1,
"Utilities: "+utiPer+"% XLU #55",
if utiPer > 1.50 then GlobalColor("VeryGood") else
if utiPer > 1 && utiPer <= 1.50 then GlobalColor("Good") else
if utiPer > .5 && utiPer <= 1 then GlobalColor("ModGood") else
if utiPer > .25 && utiPer <= .5 then GlobalColor("SlightlyGood") else
if utiPer > 0 && utiPer <= .25 then GlobalColor("SluggishGood") else
if utiPer == 0 then GlobalColor("Neutral") else
if utiPer < 0 && utiPer >= -.25 then GlobalColor("SluggishBad") else
if utiPer < -.25 && utiPer >= -.5 then GlobalColor("SlightlyBad") else
if utiPer < -.5 && utiPer >= -1 then GlobalColor("ModBad") else
if utiPer < -1 && utiPer >= -1.50 then GlobalColor("Bad") else
if utiPer < -1.50 then GlobalColor("VeryBad") else
Color.black
);

# Materials Sector
def Materials = Sector("$SP500#15");
def matPer = round(Materials,4) * 100;
AddLabel(
1,
"Materials: "+matPer+"% XLB #15",
if matPer > 1.50 then GlobalColor("VeryGood") else
if matPer > 1 && matPer <= 1.50 then GlobalColor("Good") else
if matPer > .5 && matPer <= 1 then GlobalColor("ModGood") else
if matPer > .25 && matPer <= .5 then GlobalColor("SlightlyGood") else
if matPer > 0 && matPer <= .25 then GlobalColor("SluggishGood") else
if matPer == 0 then GlobalColor("Neutral") else
if matPer < 0 && matPer >= -.25 then GlobalColor("SluggishBad") else
if matPer < -.25 && matPer >= -.5 then GlobalColor("SlightlyBad") else
if matPer < -.5 && matPer >= -1 then GlobalColor("ModBad") else
if matPer < -1 && matPer >= -1.50 then GlobalColor("Bad") else
if matPer < -1.50 then GlobalColor("VeryBad") else
Color.black
);

# Consumer Staples Sector
def ConStaple = Sector("$SP500#30");
def conSPer = round(ConStaple,4) * 100;
AddLabel(
1,
"Consumer Staples: "+conSPer+"% XLP #30",
if conSPer > 1.50 then GlobalColor("VeryGood") else
if conSPer > 1 && conSPer <= 1.50 then GlobalColor("Good") else
if conSPer > .5 && conSPer <= 1 then GlobalColor("ModGood") else
if conSPer > .25 && conSPer <= .5 then GlobalColor("SlightlyGood") else
if conSPer > 0 && conSPer <= .25 then GlobalColor("SluggishGood") else
if conSPer == 0 then GlobalColor("Neutral") else
if conSPer < 0 && conSPer >= -.25 then GlobalColor("SluggishBad") else
if conSPer < -.25 && conSPer >= -.5 then GlobalColor("SlightlyBad") else
if conSPer < -.5 && conSPer >= -1 then GlobalColor("ModBad") else
if conSPer < -1 && conSPer >= -1.50 then GlobalColor("Bad") else
if conSPer < -1.50 then GlobalColor("VeryBad") else
Color.black
);

# Information Technology Sector
def InfoTech = Sector("$SP500#45");
def infPer = round(InfoTech,4) * 100;
AddLabel(
1,
"Info Tech: " +infPer+"% XLK #45",
if infPer > 1.50 then GlobalColor("VeryGood") else
if infPer > 1 && infPer <= 1.50 then GlobalColor("Good") else
if infPer > .5 && infPer <= 1 then GlobalColor("ModGood") else
if infPer > .25 && infPer <= .5 then GlobalColor("SlightlyGood") else
if infPer > 0 && infPer <= .25 then GlobalColor("SluggishGood") else
if infPer == 0 then GlobalColor("Neutral") else
if infPer < 0 && infPer >= -.25 then GlobalColor("SluggishBad") else
if infPer < -.25 && infPer >= -.5 then GlobalColor("SlightlyBad") else
if infPer < -.5 && infPer >= -1 then GlobalColor("ModBad") else
if infPer < -1 && infPer >= -1.50 then GlobalColor("Bad") else
if infPer < -1.50 then GlobalColor("VeryBad") else
Color.black
);

# Real Estate Sector
def RealEste = Sector("$SP500#60");
def reaPer = round(RealEste,4) * 100;
AddLabel(
1,
"Real Estate: " +reaPer+"% XLRE #60",
if reaPer > 1.50 then GlobalColor("VeryGood") else
if reaPer > 1 && reaPer <= 1.50 then GlobalColor("Good") else
if reaPer > .5 && reaPer <= 1 then GlobalColor("ModGood") else
if reaPer > .25 && reaPer <= .5 then GlobalColor("SlightlyGood") else
if reaPer > 0 && reaPer <= .25 then GlobalColor("SluggishGood") else
if reaPer == 0 then GlobalColor("Neutral") else
if reaPer < 0 && reaPer >= -.25 then GlobalColor("SluggishBad") else
if reaPer < -.25 && reaPer >= -.5 then GlobalColor("SlightlyBad") else
if reaPer < -.5 && reaPer >= -1 then GlobalColor("ModBad") else
if reaPer < -1 && reaPer >= -1.50 then GlobalColor("Bad") else
if reaPer < -1.50 then GlobalColor("VeryBad") else
Color.black
);


# Industrial Sector
def Industrl = Sector("$SP500#20");
def indPer = round(Industrl,4) * 100;
AddLabel(
1,
"Industrials: " +indPer+"% XLI #20",
if indPer > 1.50 then GlobalColor("VeryGood") else
if indPer > 1 && indPer <= 1.50 then GlobalColor("Good") else
if indPer > .5 && indPer <= 1 then GlobalColor("ModGood") else
if indPer > .25 && indPer <= .5 then GlobalColor("SlightlyGood") else
if indPer > 0 && indPer <= .25 then GlobalColor("SluggishGood") else
if indPer == 0 then GlobalColor("Neutral") else
if indPer < 0 && indPer >= -.25 then GlobalColor("SluggishBad") else
if indPer < -.25 && indPer >= -.5 then GlobalColor("SlightlyBad") else
if indPer < -.5 && indPer >= -1 then GlobalColor("ModBad") else
if indPer < -1 && indPer >= -1.50 then GlobalColor("Bad") else
if indPer < -1.50 then GlobalColor("VeryBad") else
Color.black
);

# Healthcare Sector
def Health = Sector("$SP500#35");
def heaPer = round(Health,4) * 100;
AddLabel(
1,
"Health Care: " +heaPer+"% XLV #35",
if heaPer > 1.50 then GlobalColor("VeryGood") else
if heaPer > 1 && heaPer <= 1.50 then GlobalColor("Good") else
if heaPer > .5 && heaPer <= 1 then GlobalColor("ModGood") else
if heaPer > .25 && heaPer <= .5 then GlobalColor("SlightlyGood") else
if heaPer > 0 && heaPer <= .25 then GlobalColor("SluggishGood") else
if heaPer == 0 then GlobalColor("Neutral") else
if heaPer < 0 && heaPer >= -.25 then GlobalColor("SluggishBad") else
if heaPer < -.25 && heaPer >= -.5 then GlobalColor("SlightlyBad") else
if heaPer < -.5 && heaPer >= -1 then GlobalColor("ModBad") else
if heaPer < -1 && heaPer >= -1.50 then GlobalColor("Bad") else
if heaPer < -1.50 then GlobalColor("VeryBad") else
Color.black
);

# Telecommunication Sector
def Telecoms = Sector("$SP500#50");
def telPef = round(Telecoms,4) * 100;
AddLabel(
1,
"Telecoms: " +telPef+"% XLC #50",
if telPef > 1.50 then GlobalColor("VeryGood") else
if telPef > 1 && telPef <= 1.50 then GlobalColor("Good") else
if telPef > .5 && telPef <= 1 then GlobalColor("ModGood") else
if telPef > .25 && telPef <= .5 then GlobalColor("SlightlyGood") else
if telPef > 0 && telPef <= .25 then GlobalColor("SluggishGood") else
if telPef == 0 then GlobalColor("Neutral") else
if telPef < 0 && telPef >= -.25 then GlobalColor("SluggishBad") else
if telPef < -.25 && telPef >= -.5 then GlobalColor("SlightlyBad") else
if telPef < -.5 && telPef >= -1 then GlobalColor("ModBad") else
if telPef < -1 && telPef >= -1.50 then GlobalColor("Bad") else
if telPef < -1.50 then GlobalColor("VeryBad") else
Color.black
);

def NDX = Sector("NDX");
def ndxPer = Round(NDX, 4) * 100;
def CurrND = +close("NDX", period = AggregationPeriod.DAY);
def ChangeNDX = CurrND - CurrND[1];

addLabel(1, "NASD: "+CurrND +" Chg :" + ChangeNDX + "  (" + ndxPer + "%" + ")  ", if ChangeNDX > 0 then color.cyan else if ChangeNDX < 0 then color.light_gray else if ndxPer > 0 then COLOR.CYAN else color.light_gray);

def DJI = Sector("$DJI");
def djiPer = Round(DJI, 4) * 100;
def CurrDJ = +close("$DJI", period = AggregationPeriod.DAY);
def ChangeDJ = CurrDJ - CurrDJ[1];

addLabel(yes, (Concat("DJI: ", Round (CurrDJ, 1))) + " Chg: " + Round(ChangeDJ) + " (" + djiPer + "%" + ")  ", if ChangeDJ > 0 then color.cyan else if ChangeDJ < 0 then color.LIGHT_GRAY else if djiPer > 0 then COLOR.CYAN else color.LIGHT_GRAY);

def COMP = Sector("COMP:GIDS");
def compPer = Round(COMP, 4) * 100;
def CurrC = +close("COMP:GIDS", period = AggregationPeriod.DAY);
def ChangeC = CurrC - CurrC[1];

addLabel(yes, (Concat("COMP: ", Round (CurrC, 1))) + " Chg: " + Round(ChangeC) + " (" + compPer + "%" + ")  ", if ChangeC > 0 then color.cyan else if ChangeC < 0 then color.LIGHT_GRAY else if compPer > 0 then COLOR.CYAN else color.LIGHT_GRAY);

def RUT = Sector("RUT");
def rutPer = Round(RUT, 4) * 100;
def CurrRU = +close("RUT", period = AggregationPeriod.DAY);
def ChangeRU = CurrRU - CurrRU[1];

addLabel(yes, (Concat("RUT: ", Round (CurrRU, 1))) + " Chg: " + Round(ChangeRU) + " (" + rutPer + "%" + ")  ", if ChangeRU > 0 then color.cyan else if ChangeRU < 0 then color.LIGHT_GRAY else if rutPer > 0 then COLOR.CYAN else color.LIGHT_GRAY);

# End Study
 
Last edited by a moderator:
Sort by date Sort by votes

Join useThinkScript to post your question to a community of 21,000+ developers and traders.

SIGN UP NOW LEARN MORE
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
T Sector Labels Percent change from Previous Day's Close Questions 2
B Industry / Sector ranking Questions 3
markallenwilson1016 Sector ID and tendancy Questions 1
G How To Display The Equity's Sector Questions 3
S Symbol Sector Comparison to Current Chart Questions 4

Similar threads

Not the exact question you're looking for?

Start a new thread and receive assistance from our community.

87k+ Posts
451 Online
Create Post

Similar threads

Similar threads

The Market Trading Game Changer

Join 2,500+ subscribers inside the useThinkScript VIP Membership Club
  • Exclusive indicators
  • Proven strategies & setups
  • Private Discord community
  • ‘Buy The Dip’ signal alerts
  • Exclusive members-only content
  • Add-ons and resources
  • 1 full year of unlimited support
Try VIP Club Today

Frequently Asked Questions

What is useThinkScript?

useThinkScript is the #1 community of stock market investors using indicators and other tools to power their trading strategies. Traders of all skill levels use our forums to learn about scripting and indicators, help each other, and discover new ways to gain an edge in the markets.

How do I get started?

We get it. Our forum can be intimidating, if not overwhelming. With thousands of topics, tens of thousands of posts, our community has created an incredibly deep knowledge base for stock traders. No one can ever exhaust every resource provided on our site.

If you are new, or just looking for guidance, here are some helpful links to get you started.

What are the benefits of VIP Membership?
VIP members get exclusive access to these proven and tested premium indicators: Buy the Dip, Advanced Market Moves 2.0, Take Profit, and Volatility Trading Range. In addition, VIP members get access to over 50 VIP-only custom indicators, add-ons, and strategies, private VIP-only forums, private Discord channel to discuss trades and strategies in real-time, customer support, trade alerts, and much more. Learn all about VIP membership here.
How can I access the premium indicators?
To access the premium indicators, which are plug and play ready, sign up for VIP membership here.
Back
Top