plotting fib extension between two dates

N

Neil

New member
Hi is it possible to modify the fib code
https://usethinkscript.com/threads/auto-fib-fibonacci-levels-indicator-for-thinkorswim.14/
to pick state date/time and end date/time. looking for plotting fib extension between two dates and time based on 1 min chart. for eg:
8/11/22 8:35 PM8/18/22 11:36 PM

also same for timeseries or ratio. looking to plot 161.8 cross section between fib extension and fib time ration on those dates.
Ruby: 
# Auto Fib V1.3
# tomsk
# 11.19.2019

# Automatically draws fibonacci retracements using the highest price and lowest price
# from the current view and timeframe.
#
# Fibonacci retracements use horizontal lines to indicate areas of support or resistance
# at the key Fibonacci levels before it continues in the original direction. These levels
# are created by drawing a trendline between two extreme points and then dividing the
# vertical distance by the key Fibonacci ratios of: 23.6%, 38.2%, 50%, 61.8%, 78.6%, and 100%.

# CHANGE LOG
#
# V1.0 - 12.18.2018 - BenTen       - Initial release of Auto Fib, created by Ryan Hendricks
# V1.1 - 11.15.2019 - theelderwand - As script was difficult to read, made the following enhancements
#                                    Expands to right
#                                    Doesn't expand to left
#                                    Custom colors for Fibonacci bars (0.618 is GOLD color)
#                                    Custom line weights
#                                    Code is modularized so you can add extra plots as needed
# V1.2 - 11.15.2019 - tomsk        - Added an input selector for the colors of the label. You
#                                    can select from any of the colors listed - red, orange,
#                                    green, etc and bubbles for all the fib retracements will
#                                    utilize that color.
# V1.3 - 11.19.2019 - tomsk        - Modified the AddChartBubbles to be displayed on the right
#                                    side of the chart. Please ensure that you increase the
#                                    expansion area to that the bubbles have room to be displayed
#                                    Chart Settings > Time Axis > Expansion Area

#hint Price: Price used in the alerts on crossing retracement lines. <b>(Default is Close)</b>

#hint coefficient_0: Retracement Line 0: Retracement from the highest high to the lowest low.<b>(Default is 0%)</b>
#hint Coefficient_1: Retracement Line 1: Retracement from the highest high to the lowest low.<b>(Default is 23.6%)</b>
#hint Coefficient_2: Retracement Line 2: Retracement from the highest high to the lowest low.<b>(Default is 38.2%)</b>
#hint Coefficient_3: Retracement Line 3: Retracement from the highest high to the lowest low.<b>(Default is 50%)</b>
#hint Coefficient_4: Retracement Line 4: Retracement from the highest high to the lowest low.<b>(Default is 61.8%)</b>
#hint Coefficient_5: Retracement Line 5: Retracement from the highest high to the lowest low.<b>(Default is 78.6%)</b>
#hint Coefficient_6: Retracement Line 6: Retracement from the highest high to the lowest low.<b>(Default is 100%)</b>

#wizard input: Price
#wizard text: Inputs: Price:
#wizard input: coefficient_0
#wizard text: coefficient_0:
#wizard input: Coefficient_1
#wizard text: Coefficient_1:
#wizard input: Coefficient_2
#wizard text: Coefficient_2:
#wizard input: Coefficient_3
#wizard text: Coefficient_3:
#wizard input: Coefficient_4
#wizard text: Coefficient_4:
#wizard input: Coefficient_5
#wizard text: Coefficient_5:
#wizard input: Coefficient_6
#wizard text: Coefficient_6:

input price = close;
input high = high;
input low = low;
input coefficient_0 = 0.000;
input coefficient_1 = .236;
input Coefficient_2 = .382;
input Coefficient_3 = .500;
input Coefficient_4 = .618;
Input Coefficient_5 = .786;
input Coefficient_6 = 1.000;

input LabelColor = {default "MAGENTA", "CYAN", "PINK", "LIGHT_GRAY", "ORANGE", "RED", "GREEN", "GRAY", "WHITE"};
input n = 3;

def n1  = n + 1;
def a = HighestAll(high);
def b = LowestAll(low);
def barnumber = barNumber();
def c = if high == a then barnumber else double.nan;
def d = if low == b then barnumber else double.nan;
rec highnumber = compoundValue(1, if IsNaN(c) then highnumber[1] else c, c);
def highnumberall = HighestAll(highnumber);
rec lownumber = compoundValue(1, if IsNaN(d) then lownumber[1] else d, d);
def lownumberall = LowestAll(lownumber);

def upward = highnumberall > lownumberall;
def downward = highnumberall < lownumberall;

def x = AbsValue(lownumberall - highnumberall );

def slope = (a - b) / x;
def slopelow = (b - a) / x;

def day = getDay();
def month = getMonth();
def year = getYear();
def lastDay = getLastDay();
def lastmonth = getLastMonth();
def lastyear = getLastYear();
def isToday = if(day == lastDay and month == lastmonth and year == lastyear, 1, 0);
def istodaybarnumber = HighestAll(if isToday then barnumber else double.nan);
def line = b + (slope * (barnumber - lownumber));
def linelow = a + (slopelow * (barnumber - highnumber));
def currentlinelow = if barnumber <= lownumberall then linelow else double.nan;
def currentline = if barnumber <= highnumberall then line else double.nan;

Plot FibFan =  if  downward then currentlinelow else if upward then currentline else double.nan;
FibFan.SetStyle(Curve.SHORT_DASH);
FibFan.AssignValueColor(color.red);
fibfan.hidebubble();

def range =  a - b;

def value0 = range * coefficient_0;
def value1 = range * coefficient_1;
def value2 = range * coefficient_2;
def value3 = range * coefficient_3;
def value4 = range * coefficient_4;
def value5 = range * coefficient_5;
def value6 = range * coefficient_6;

def condition1 = downward and barnumber >= highnumberall;
def condition2 = upward and barnumber >= lownumberall;

Plot Retracement0 = if condition1 then highestall(b + value0) else if condition2 then highestall(a - value0) else double.nan;
Plot Retracement1 = if condition1 then highestall(b + value1) else if condition2 then highestall(a - value1) else double.nan;
Plot Retracement2 = if condition1 then highestall(b + value2) else if condition2 then highestall(a - value2) else double.nan;
Plot Retracement3 = if condition1 then highestall(b + value3) else if condition2 then highestall(a - value3) else double.nan;
Plot Retracement4 = if condition1 then highestall(b + value4) else if condition2 then highestall(a - value4) else double.nan;
Plot Retracement5 = if condition1 then highestall(b + value5) else if condition2 then highestall(a - value5) else double.nan;
Plot Retracement6 = if condition1 then highestall(b + value6) else if condition2 then highestall(a - value6) else double.nan;

Retracement0.assignvaluecolor(CreateColor(255,255,255));
Retracement0.setLineWeight(4);
retracement0.hidebubble();
AddChartBubble((downward and close[n1]) and IsNaN(close[n]), retracement0, concat( (coefficient_0 * 100), "%"), GetColor(LabelColor), yes);
AddChartBubble((upward and close[n1]) and IsNaN(close[n]), retracement0, concat( (coefficient_0 * 100), "%"), GetColor(LabelColor), yes);

Retracement1.assignvaluecolor(CreateColor(173,216,230));
Retracement1.setLineWeight(2);
retracement1.hidebubble();
AddChartBubble((downward and close[n1]) and IsNaN(close[n]), retracement1, concat( (coefficient_1 * 100), "%"), GetColor(LabelColor), yes);
AddChartBubble((upward and close[n1]) and IsNaN(close[n]), retracement1, concat( (coefficient_1 * 100), "%"), GetColor(LabelColor), yes);

Retracement2.assignvaluecolor(CreateColor(0,197,49));
Retracement2.setLineWeight(2);
retracement2.hidebubble();
AddChartBubble((downward and close[n1]) and IsNaN(close[n]), retracement2, concat( (coefficient_2 * 100), "%"), GetColor(LabelColor), yes);
AddChartBubble((upward and close[n1]) and IsNaN(close[n]), retracement2, concat( (coefficient_2 * 100), "%"), GetColor(LabelColor), yes);

Retracement3.assignvaluecolor(CreateColor(255,64,64));
Retracement3.setLineWeight(3);
retracement3.hidebubble();
AddChartBubble((downward and close[n1]) and IsNaN(close[n]), retracement3, concat( (coefficient_3 * 100), "%"), GetColor(LabelColor), yes);
AddChartBubble((upward and close[n1]) and IsNaN(close[n]), retracement3, concat( (coefficient_3 * 100), "%"), GetColor(LabelColor), yes);

Retracement4.assignvaluecolor(CreateColor(255,215,0));
Retracement4.setLineWeight(5);
retracement4.hidebubble();
AddChartBubble((downward and close[n1]) and IsNaN(close[n]), retracement4, concat( (coefficient_4 * 100), "%"), GetColor(LabelColor), yes);
AddChartBubble((upward and close[n1]) and IsNaN(close[n]), retracement4, concat( (coefficient_4 * 100), "%"), GetColor(LabelColor), yes);

Retracement5.assignvaluecolor(CreateColor(0,255,255));
Retracement5.setLineWeight(2);
retracement5.hidebubble();
AddChartBubble((downward and close[n1]) and IsNaN(close[n]), retracement5, concat( (coefficient_5 * 100), "%"), GetColor(LabelColor), yes);
AddChartBubble((upward and close[n1]) and IsNaN(close[n]), retracement5, concat( (coefficient_5 * 100), "%"), GetColor(LabelColor), yes);

Retracement6.assignvaluecolor(CreateColor(255,255,255));
Retracement6.setLineWeight(4);
Retracement6.hidebubble();
AddChartBubble((downward and close[n1]) and IsNaN(close[n]), retracement6, concat( (coefficient_6 * 100), "%"), GetColor(LabelColor), yes);
AddChartBubble((upward and close[n1]) and IsNaN(close[n]), retracement6, concat( (coefficient_6 * 100), "%"), GetColor(LabelColor), yes);

alert((price crosses below Retracement0) , "Price crosses below Retracement Line 0");
alert((price crosses above Retracement0) , "Price crosses above Retracement Line 0");
alert((price crosses below Retracement1) , "Price crosses below Retracement Line 1");
alert((price crosses above Retracement1) , "Price crosses above Retracement Line 1");
alert((price crosses below Retracement2) , "Price crosses below Retracement Line 2");
alert((price crosses above Retracement2) , "Price crosses above Retracement Line 2");
alert((price crosses below Retracement3) , "Price crosses below Retracement Line 3");
alert((price crosses above Retracement3) , "Price crosses above Retracement Line 3");
alert((price crosses below Retracement4) , "Price crosses below Retracement Line 4");
alert((price crosses above Retracement4) , "Price crosses above Retracement Line 4");
alert((price crosses below Retracement5) , "Price crosses below Retracement Line 5");
alert((price crosses above Retracement5) , "Price crosses above Retracement Line 5");
alert((price crosses below Retracement6) , "Price crosses below Retracement Line 6");
alert((price crosses above Retracement6) , "Price crosses above Retracement Line 6");
# End Auto Fib v1.3
 
Last edited by a moderator:
Solution
halcyonguy
Neil said:
Hi is it possible to modify the fib code
https://usethinkscript.com/threads/auto-fib-fibonacci-levels-indicator-for-thinkorswim.14/
to pick state date/time and end date/time. looking for plotting fib extension between two dates and time based on 1 min chart. for eg:
8/11/22 8:35 PM8/18/22 11:36 PM

also same for timeseries or ratio. looking to plot 161.8 cross section between fib extension and fib time ration on those dates. hal_fib
Click to expand...

this is long and ugly and has extra code it it, but works for times less than 1 hour, on a 5min - 20 day chart

Code: 
# auto_fib_lines_bydatetime_01d
# pick 2 dates and times to define fib levels

#...
Sort by date Sort by votes
Neil said:
Hi is it possible to modify the fib code
https://usethinkscript.com/threads/auto-fib-fibonacci-levels-indicator-for-thinkorswim.14/
to pick state date/time and end date/time. looking for plotting fib extension between two dates and time based on 1 min chart. for eg:
8/11/22 8:35 PM8/18/22 11:36 PM

also same for timeseries or ratio. looking to plot 161.8 cross section between fib extension and fib time ration on those dates. hal_fib
Click to expand...

this is long and ugly and has extra code it it, but works for times less than 1 hour, on a 5min - 20 day chart

Code: 
# auto_fib_lines_bydatetime_01d
# pick 2 dates and times to define fib levels

# https://usethinkscript.com/threads/plotting-fib-extension-between-two-dates.12517/

# Auto Fib V1.3
# tomsk
# 11.19.2019

# Automatically draws fibonacci retracements using the highest price and lowest price
# from the current view and timeframe.
#
# Fibonacci retracements use horizontal lines to indicate areas of support or resistance
# at the key Fibonacci levels before it continues in the original direction. These levels
# are created by drawing a trendline between two extreme points and then dividing the
# vertical distance by the key Fibonacci ratios of: 23.6%, 38.2%, 50%, 61.8%, 78.6%, and 100%.

# CHANGE LOG
#
# V1.0 - 12.18.2018 - BenTen       - Initial release of Auto Fib, created by Ryan Hendricks
# V1.1 - 11.15.2019 - theelderwand - As script was difficult to read, made the following enhancements
#                                    Expands to right
#                                    Doesn't expand to left
#                                    Custom colors for Fibonacci bars (0.618 is GOLD color)
#                                    Custom line weights
#                                    Code is modularized so you can add extra plots as needed
# V1.2 - 11.15.2019 - tomsk        - Added an input selector for the colors of the label. You
#                                    can select from any of the colors listed - red, orange,
#                                    green, etc and bubbles for all the fib retracements will
#                                    utilize that color.
# V1.3 - 11.19.2019 - tomsk        - Modified the AddChartBubbles to be displayed on the right
#                                    side of the chart. Please ensure that you increase the
#                                    expansion area to that the bubbles have room to be displayed
#                                    Chart Settings > Time Axis > Expansion Area

#hint Price: Price used in the alerts on crossing retracement lines. <b>(Default is Close)</b>

#hint coefficient_0: Retracement Line 0: Retracement from the highest high to the lowest low.<b>(Default is 0%)</b>
#hint Coefficient_1: Retracement Line 1: Retracement from the highest high to the lowest low.<b>(Default is 23.6%)</b>
#hint Coefficient_2: Retracement Line 2: Retracement from the highest high to the lowest low.<b>(Default is 38.2%)</b>
#hint Coefficient_3: Retracement Line 3: Retracement from the highest high to the lowest low.<b>(Default is 50%)</b>
#hint Coefficient_4: Retracement Line 4: Retracement from the highest high to the lowest low.<b>(Default is 61.8%)</b>
#hint Coefficient_5: Retracement Line 5: Retracement from the highest high to the lowest low.<b>(Default is 78.6%)</b>
#hint Coefficient_6: Retracement Line 6: Retracement from the highest high to the lowest low.<b>(Default is 100%)</b>

#wizard input: Price
#wizard text: Inputs: Price:
#wizard input: coefficient_0
#wizard text: coefficient_0:
#wizard input: Coefficient_1
#wizard text: Coefficient_1:
#wizard input: Coefficient_2
#wizard text: Coefficient_2:
#wizard input: Coefficient_3
#wizard text: Coefficient_3:
#wizard input: Coefficient_4
#wizard text: Coefficient_4:
#wizard input: Coefficient_5
#wizard text: Coefficient_5:
#wizard input: Coefficient_6
#wizard text: Coefficient_6:

#----------------------------------------

def bn = barnumber();
def na = double.nan;
input start_date = 20220818;
input start_time = 1200;
input end_date = 20220902;
input end_time = 1400;

def sthr = floor(start_time/100);
def stmin = (start_time - (sthr*100));
def endhr = floor(end_time/100);
def endmin = (end_time - (endhr*100));

def date1 = if bn == 1 then getYYYYMMDD() else date1[1];
def start_bad = if (start_date < date1) then 1 else start_bad[1];

def chart1year = Round(date1/10000, 0);
def chart1month = Round((date1 % 10000) / 100, 0);
def chart1day = (date1 % 100);

addlabel(start_bad , " xxx  start date is before the first date on chart , " + (chart1month + "/" + chart1day + "/" + AsPrice(chart1year)) + "  xxx" , color.cyan);
#addchartbubble(1, low*0.996, "s " + start_date + "\n1 " + date1 + "\n" + (start_date < date1) + "\n" + start_bad, color.cyan, no);


def yearstart = Round(start_date/10000, 0);
def monthstart = Round((start_date % 10000) / 100, 0);
def daystart = (start_date % 100);
addLabel(1, "start date: " + monthstart + "/" + daystart + "/" + AsPrice(yearstart), color.white);
addlabel(1, sthr + ":" + stmin + (if stmin == 0 then "0" else ""), color.white);

def yearend = Round(end_date/10000, 0);
def monthend = Round((end_date % 10000) / 100, 0);
def dayend = (end_date % 100);
addLabel(1, "end date: " + monthend + "/" + dayend + "/" + AsPrice(yearend), color.white);
addlabel(1, endhr + ":" + endmin + (if endmin == 0 then "0" else ""), color.white);

# bn's of start and end bars, based on date and time
def stbn2 = if secondsfromtime(start_time) == 0 and start_date == getYYYYMMDD() then bn else 0;
def endbn2 = if secondsfromtime(end_time) == 0 and end_date == getYYYYMMDD() then bn else 0;
def stbn = highestall(stbn2);
def endbn = highestall(endbn2);
def stpr = highestall(if bn == stbn then close else 0);
def endpr = highestall(if bn == endbn then close else 0);


# find the high and low of the 2 points
def phi = max(stpr,endpr);
def plo = min(stpr,endpr);
def phibn = if phi == stpr then stbn else endbn;
def plobn = if plo == stpr then stbn else endbn;


#----------------------------------

input price_type = close;
def isbetween = if Between( GetYYYYMMDD(), start_date, end_date) then 1 else 0;
def between_first = ( !isbetween[1] and isbetween );
def between_last = ( isbetween and !isbetween[-1] );

# ---------------------
# just dates
# prices and bn of 2 points
#def p1 = highestall(if between_first then price_type else 0);
#def p2 = highestall(if between_last then price_type else 0);
#def p1bn = highestall(if between_first then bn else 0);
#def p2bn = highestall(if between_last then bn else 0);

# find the high and low of the 2 points
#def phi = max(p1,p2);
#def plo = min(p1,p2);
#def phibn = if phi == p1 then p1bn else p2bn;
#def plobn = if plo == p1 then p1bn else p2bn;
#--------------------------

# plot line between points
#def t1 = if bn == p1bn or bn == p2bn then close else na;
def t1 = if bn == stbn or bn == endbn then close else na;
plot t2 = t1;
t2.EnableApproximation();
t2.SetDefaultColor(Color.white);
t2.SetStyle(Curve.MEDIUM_DASH);


input show_vertical_start_stop_lines = yes;
addverticalline(show_vertical_start_stop_lines and stbn == bn, "-", color.light_gray);
addverticalline(show_vertical_start_stop_lines and endbn == bn, "-", color.light_gray);


#---------------------------
# ...ref formulas, to replace
#def a = HighestAll(high);
#def b = LowestAll(low);
#def c = if high == a then barnumber else double.nan;
#def d = if low == b then barnumber else double.nan;

# ...date & time, assign new values for hi ,lo, bn's
def a = phi;
def b = plo;
def c = phibn;
def d = plobn;
#---------------------------


#----------------------------------------------

input price = close;
input high = high;
input low = low;
input coefficient_0 = 0.000;
input coefficient_1 = .236;
input Coefficient_2 = .382;
input Coefficient_3 = .500;
input Coefficient_4 = .618;
Input Coefficient_5 = .786;
input Coefficient_6 = 1.000;

#input LabelColor = {default "MAGENTA", "CYAN", "PINK", "LIGHT_GRAY", "ORANGE", "RED", "GREEN", "GRAY", "WHITE"};
input LabelColor = {default "MAGENTA", "CYAN", "PINK", "LIGHT_GRAY", "ORANGE", "RED", "GREEN", "GRAY", "TAN", "WHITE"};

input n = 3;
def n1  = n + 1;
def barnumber = barNumber();

#============================
# replace these formula , above
#def a = HighestAll(high);
#def b = LowestAll(low);
#def c = if high == a then barnumber else double.nan;
#def d = if low == b then barnumber else double.nan;
#============================


rec highnumber = compoundValue(1, if IsNaN(c) then highnumber[1] else c, c);
def highnumberall = HighestAll(highnumber);
rec lownumber = compoundValue(1, if IsNaN(d) then lownumber[1] else d, d);
def lownumberall = LowestAll(lownumber);

def upward = highnumberall > lownumberall;
def downward = highnumberall < lownumberall;
def x = AbsValue(lownumberall - highnumberall );
def slope = (a - b) / x;
def slopelow = (b - a) / x;

def day = getDay();
def month = getMonth();
def year = getYear();
def lastDay = getLastDay();
def lastmonth = getLastMonth();
def lastyear = getLastYear();
def isToday = if(day == lastDay and month == lastmonth and year == lastyear, 1, 0);
def istodaybarnumber = HighestAll(if isToday then barnumber else double.nan);
def line = b + (slope * (barnumber - lownumber));
def linelow = a + (slopelow * (barnumber - highnumber));
def currentlinelow = if barnumber <= lownumberall then linelow else double.nan;
def currentline = if barnumber <= highnumberall then line else double.nan;

# orig line
#Plot FibFan =  if  downward then currentlinelow else if upward then currentline else double.nan;
#FibFan.SetStyle(Curve.SHORT_DASH);
#FibFan.AssignValueColor(color.red);
#fibfan.hidebubble();

def range =  a - b;
def value0 = range * coefficient_0;
def value1 = range * coefficient_1;
def value2 = range * coefficient_2;
def value3 = range * coefficient_3;
def value4 = range * coefficient_4;
def value5 = range * coefficient_5;
def value6 = range * coefficient_6;

def condition1 = downward and barnumber >= highnumberall;
def condition2 = upward and barnumber >= lownumberall;

#Plot Retracement0 = if condition1 then highestall(b + value0) else if condition2 then highestall(a - value0) else double.nan;
Plot Retracement0 = if isnan(close) then na else if condition1 then highestall(b + value0) else if condition2 then highestall(a - value0) else double.nan;
Plot Retracement1 = if isnan(close) then na else if condition1 then highestall(b + value1) else if condition2 then highestall(a - value1) else double.nan;
Plot Retracement2 = if isnan(close) then na else if condition1 then highestall(b + value2) else if condition2 then highestall(a - value2) else double.nan;
Plot Retracement3 = if isnan(close) then na else if condition1 then highestall(b + value3) else if condition2 then highestall(a - value3) else double.nan;
Plot Retracement4 = if isnan(close) then na else if condition1 then highestall(b + value4) else if condition2 then highestall(a - value4) else double.nan;
Plot Retracement5 = if isnan(close) then na else if condition1 then highestall(b + value5) else if condition2 then highestall(a - value5) else double.nan;
Plot Retracement6 = if isnan(close) then na else if condition1 then highestall(b + value6) else if condition2 then highestall(a - value6) else double.nan;

Retracement0.assignvaluecolor(CreateColor(255,255,255));
#Retracement0.setLineWeight(4);
Retracement0.setLineWeight(1);
retracement0.hidebubble();
AddChartBubble((downward and close[n1]) and IsNaN(close[n]), retracement0, concat( (coefficient_0 * 100), "%"), GetColor(LabelColor), yes);
AddChartBubble((upward and close[n1]) and IsNaN(close[n]), retracement0, concat( (coefficient_0 * 100), "%"), GetColor(LabelColor), yes);

Retracement1.assignvaluecolor(CreateColor(173,216,230));
#Retracement1.setLineWeight(2);
Retracement1.setLineWeight(1);
retracement1.hidebubble();
AddChartBubble((downward and close[n1]) and IsNaN(close[n]), retracement1, concat( (coefficient_1 * 100), "%"), GetColor(LabelColor), yes);
AddChartBubble((upward and close[n1]) and IsNaN(close[n]), retracement1, concat( (coefficient_1 * 100), "%"), GetColor(LabelColor), yes);

Retracement2.assignvaluecolor(CreateColor(0,197,49));
#Retracement2.setLineWeight(2);
Retracement2.setLineWeight(1);
retracement2.hidebubble();
AddChartBubble((downward and close[n1]) and IsNaN(close[n]), retracement2, concat( (coefficient_2 * 100), "%"), GetColor(LabelColor), yes);
AddChartBubble((upward and close[n1]) and IsNaN(close[n]), retracement2, concat( (coefficient_2 * 100), "%"), GetColor(LabelColor), yes);

Retracement3.assignvaluecolor(CreateColor(255,64,64));
#Retracement3.setLineWeight(3);
Retracement3.setLineWeight(1);
retracement3.hidebubble();
AddChartBubble((downward and close[n1]) and IsNaN(close[n]), retracement3, concat( (coefficient_3 * 100), "%"), GetColor(LabelColor), yes);
AddChartBubble((upward and close[n1]) and IsNaN(close[n]), retracement3, concat( (coefficient_3 * 100), "%"), GetColor(LabelColor), yes);

Retracement4.assignvaluecolor(CreateColor(255,215,0));
#Retracement4.setLineWeight(5);
Retracement4.setLineWeight(1);
retracement4.hidebubble();
AddChartBubble((downward and close[n1]) and IsNaN(close[n]), retracement4, concat( (coefficient_4 * 100), "%"), GetColor(LabelColor), yes);
AddChartBubble((upward and close[n1]) and IsNaN(close[n]), retracement4, concat( (coefficient_4 * 100), "%"), GetColor(LabelColor), yes);

Retracement5.assignvaluecolor(CreateColor(0,255,255));
#Retracement5.setLineWeight(2);
Retracement5.setLineWeight(1);
retracement5.hidebubble();
AddChartBubble((downward and close[n1]) and IsNaN(close[n]), retracement5, concat( (coefficient_5 * 100), "%"), GetColor(LabelColor), yes);
AddChartBubble((upward and close[n1]) and IsNaN(close[n]), retracement5, concat( (coefficient_5 * 100), "%"), GetColor(LabelColor), yes);

Retracement6.assignvaluecolor(CreateColor(255,255,255));
#Retracement6.setLineWeight(4);
Retracement6.setLineWeight(1);
Retracement6.hidebubble();
AddChartBubble((downward and close[n1]) and IsNaN(close[n]), retracement6, concat( (coefficient_6 * 100), "%"), GetColor(LabelColor), yes);
AddChartBubble((upward and close[n1]) and IsNaN(close[n]), retracement6, concat( (coefficient_6 * 100), "%"), GetColor(LabelColor), yes);

alert((price crosses below Retracement0) , "Price crosses below Retracement Line 0");
alert((price crosses above Retracement0) , "Price crosses above Retracement Line 0");
alert((price crosses below Retracement1) , "Price crosses below Retracement Line 1");
alert((price crosses above Retracement1) , "Price crosses above Retracement Line 1");
alert((price crosses below Retracement2) , "Price crosses below Retracement Line 2");
alert((price crosses above Retracement2) , "Price crosses above Retracement Line 2");
alert((price crosses below Retracement3) , "Price crosses below Retracement Line 3");
alert((price crosses above Retracement3) , "Price crosses above Retracement Line 3");
alert((price crosses below Retracement4) , "Price crosses below Retracement Line 4");
alert((price crosses above Retracement4) , "Price crosses above Retracement Line 4");
alert((price crosses below Retracement5) , "Price crosses below Retracement Line 5");
alert((price crosses above Retracement5) , "Price crosses above Retracement Line 5");
alert((price crosses below Retracement6) , "Price crosses below Retracement Line 6");
alert((price crosses above Retracement6) , "Price crosses above Retracement Line 6");
# End Auto Fib v1.3
#

PM 15min 30day
8/18 12:00 to 9/2 14:00
iYBpiyr.jpg
 
Last edited:
Upvote 0 Downvote
Solution

Join useThinkScript to post your question to a community of 21,000+ developers and traders.

SIGN UP NOW LEARN MORE
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
Bezna$ Plotting a horizontal line from a certain time to the end of the chart Questions 1
C plotting a sloped line Questions 6
A Help plotting a horizontal line at high for this study Questions 1
C Need help plotting horizontal lines as ranges Questions 3
D Is there a bug in FPL() function when plotting in strategies vs studies? Questions 3

Similar threads

Not the exact question you're looking for?

Start a new thread and receive assistance from our community.

87k+ Posts
250 Online
Create Post

Similar threads

Similar threads

The Market Trading Game Changer

Join 2,500+ subscribers inside the useThinkScript VIP Membership Club
  • Exclusive indicators
  • Proven strategies & setups
  • Private Discord community
  • ‘Buy The Dip’ signal alerts
  • Exclusive members-only content
  • Add-ons and resources
  • 1 full year of unlimited support
Try VIP Club Today

Frequently Asked Questions

What is useThinkScript?

useThinkScript is the #1 community of stock market investors using indicators and other tools to power their trading strategies. Traders of all skill levels use our forums to learn about scripting and indicators, help each other, and discover new ways to gain an edge in the markets.

How do I get started?

We get it. Our forum can be intimidating, if not overwhelming. With thousands of topics, tens of thousands of posts, our community has created an incredibly deep knowledge base for stock traders. No one can ever exhaust every resource provided on our site.

If you are new, or just looking for guidance, here are some helpful links to get you started.

What are the benefits of VIP Membership?
VIP members get exclusive access to these proven and tested premium indicators: Buy the Dip, Advanced Market Moves 2.0, Take Profit, and Volatility Trading Range. In addition, VIP members get access to over 50 VIP-only custom indicators, add-ons, and strategies, private VIP-only forums, private Discord channel to discuss trades and strategies in real-time, customer support, trade alerts, and much more. Learn all about VIP membership here.
How can I access the premium indicators?
To access the premium indicators, which are plug and play ready, sign up for VIP membership here.
Back
Top