Please help

M

Mattyb740

Member
When I copy/paste this code it says “at least one plot be defined”

I am not experienced or educated enough and was hoping someone could help me! Thanks




def price = close; def superfast_length = 9; def fast_length = 14; def slow_length = 21; def displace = 0; def mov_avg9 = ExpAverage(price[-displace], superfast_length); def mov_avg14 = ExpAverage(price[-displace], fast_length); def mov_avg21 = ExpAverage(price[-displace], slow_length); #moving averages def Superfast = mov_avg9; def Fast = mov_avg14; def Slow = mov_avg21; def buy = mov_avg9 > mov_avg14 and mov_avg14 > mov_avg21 and low > mov_avg9; def stopbuy = mov_avg9 <= mov_avg14; def buynow = !buy[1] and buy; def buysignal = CompoundValue(1, if buynow and !stopbuy then 1 else if buysignal[1] == 1 and stopbuy then 0 else buysignal[1], 0); def Buy_Signal = buysignal[1] == 0 and buysignal == 1; #Alert(condition = buysignal[1] == 0 and buysignal == 1, text = "Buy Signal", sound = Sound.Bell, "alert type" = Alert.BAR); def Momentum_Down = buysignal[1] == 1 and buysignal == 0; #Alert(condition = buysignal[1] == 1 and buysignal == 0, text = "Momentum_Down", sound = Sound.Bell, "alert type" = Alert.BAR); def sell = mov_avg9 < mov_avg14 and mov_avg14 < mov_avg21 and high < mov_avg9; def stopsell = mov_avg9 >= mov_avg14; def sellnow = !sell[1] and sell; def sellsignal = CompoundValue(1, if sellnow and !stopsell then 1 else if sellsignal[1] == 1 and stopsell then 0 else sellsignal[1], 0); def Sell_Signal = sellsignal[1] == 0 and sellsignal; #Alert(condition = sellsignal[1] == 0 and sellsignal == 1, text = "Sell Signal", sound = Sound.Bell, "alert type" = Alert.BAR); def Momentum_Up = sellsignal[1] == 1 and sellsignal == 0; #Alert(condition = sellsignal[1] == 1 and sellSignal == 0, text = "Momentum_Up", sound = Sound.Bell, "alert type" = Alert.BAR); plot Colorbars = if buysignal == 1 then 1 else if sellsignal == 1 then 2 else if buysignal == 0 or sellsignal == 0 then 3 else 0; Colorbars.Hide(); Colorbars.DefineColor("Buy_Signal_Bars", Color.GREEN); Colorbars.DefineColor("Sell_Signal_Bars", Color.RED); Colorbars.DefineColor("Neutral", Color.PLUM); #___________________________________________________________________________ input method = {default average, high_low}; def bubbleoffset = .0005; def percentamount = .01; def revAmount = .05; def atrreversal = 2.0; def atrlength = 5; def pricehigh = high; def pricelow = low; def averagelength = 5; def averagetype = AverageType.EXPONENTIAL; def mah = MovingAverage(averagetype, pricehigh, averagelength); def mal = MovingAverage(averagetype, pricelow, averagelength); def priceh = if method == method.high_low then pricehigh else mah; def pricel = if method == method.high_low then pricelow else mal; def EI = ZigZagHighLow("price h" = priceh, "price l" = pricel, "percentage reversal" = percentamount, "absolute reversal" = revAmount, "atr length" = atrlength, "atr reversal" = atrreversal); def reversalAmount = if (close * percentamount / 100) > Max(revAmount < atrreversal * reference ATR(atrlength), revAmount) then (close * percentamount / 100) else if revAmount < atrreversal * reference ATR(atrlength) then atrreversal * reference ATR(atrlength) else revAmount; rec EISave = if !IsNaN(EI) then EI else GetValue(EISave, 1); def chg = (if EISave == priceh then priceh else pricel) - GetValue(EISave, 1); def isUp = chg >= 0; rec isConf = AbsValue(chg) >= reversalAmount or (IsNaN(GetValue(EI, 1)) and GetValue(isConf, 1)); def EId = if isUp then 1 else 0; #plot EnhancedLines = if EId <= 1 then EI else Double.NaN; #EnhancedLines.AssignValueColor(if EId == 1 then Color.GREEN else if EId == 0 then Color.RED else Color.DARK_ORANGE); #EnhancedLines.SetStyle(Curve.FIRM); #EnhancedLines.EnableApproximation(); #EnhancedLines.HideBubble(); #Price Change between Enhanceds def xxhigh = if EISave == priceh then priceh else xxhigh[1]; def chghigh = priceh - xxhigh[1]; def xxlow = if EISave == pricel then pricel else xxlow[1]; def chglow = pricel - xxlow[1]; def showBubbleschange = no; AddChartBubble(showBubbleschange and !IsNaN(EI) and BarNumber() != 1, if isUp then priceh * (1 + bubbleoffset) else pricel * (1 - bubbleoffset) , "$" + chg , if isUp and chghigh > 0 then Color.GREEN else if isUp and chghigh < 0 then Color.RED else if isUp then Color.YELLOW else if !isUp and chglow > 0 then Color.GREEN else if !isUp and chglow < 0 then Color.RED else Color.YELLOW, isUp); #Price at High/Low def showBubblesprice = no; AddChartBubble(showBubblesprice and !IsNaN(EI) and BarNumber() != 1, if isUp then priceh * (1 + bubbleoffset) else pricel * (1 - bubbleoffset) , if isUp then "$" + priceh else "$" + pricel , if isUp and chghigh > 0 then Color.GREEN else if isUp and chghigh < 0 then Color.RED else if isUp then Color.YELLOW else if !isUp and chglow > 0 then Color.GREEN else if !isUp and chglow < 0 then Color.RED else Color.YELLOW, isUp); #Label for Confirmed/Unconfirmed Status of Current Enhanced #Bar Count between Enhanceds rec EIcount = if EISave[1] != EISave then 1 else if EISave[1] == EISave then EIcount[1] + 1 else 0; def EIcounthilo = if EIcounthilo[1] == 0 and (EISave == priceh or EISave == pricel) then 1 else if EISave == priceh or EISave == pricel then EIcounthilo[1] + 1 else EIcounthilo[1]; def EIhilo = if EISave == priceh or EISave == pricel then EIcounthilo else EIcounthilo + 1; def EIcounthigh = if EISave == priceh then EIcount[1] else Double.NaN; def EIcountlow = if EISave == pricel then EIcount[1] else Double.NaN; def showBubblesbarcount = no; AddChartBubble(showBubblesbarcount and !IsNaN(EI) and BarNumber() != 1, if isUp then priceh * (1 + bubbleoffset) else pricel * (1 - bubbleoffset) , if EISave == priceh then EIcounthigh else EIcountlow, if isUp and chghigh > 0 then Color.GREEN else if isUp and chghigh < 0 then Color.RED else if isUp then Color.YELLOW else if !isUp and chglow > 0 then Color.GREEN else if !isUp and chglow < 0 then Color.RED else Color.YELLOW, if isUp then yes else no ); #Arrows def EIL = if !IsNaN(EI) and !isUp then pricel else GetValue(EIL, 1); def EIH = if !IsNaN(EI) and isUp then priceh else GetValue(EIH, 1); def dir = CompoundValue(1, if EIL != EIL[1] or pricel == EIL[1] and pricel == EISave then 1 else if EIH != EIH[1] or priceh == EIH[1] and priceh == EISave then -1 else dir[1], 0); def signal = CompoundValue(1, if dir > 0 and pricel > EIL then if signal[1] <= 0 then 1 else signal[1] else if dir < 0 and priceh < EIH then if signal[1] >= 0 then -1 else signal[1] else signal[1], 0); def showarrows = yes; def U1 = showarrows and signal > 0 and signal[1] <= 0; #U1.SetPaintingStrategy(PaintingStrategy.BOOLEAN_ARROW_UP); #U1.SetDefaultColor(Color.GREEN); #U1.SetLineWeight(4); def D1 = showarrows and signal < 0 and signal[1] >= 0; #D1.SetPaintingStrategy(PaintingStrategy.BOOLEAN_ARROW_DOWN); #D1.SetDefaultColor(Color.RED); #D1.SetLineWeight(4); def barnumber = BarNumber()[10]; AddChartBubble((barnumber and U1), if isUp then low else high, if showarrows and signal > 0 and signal[1] <= 0 then "Reversal:" + low else "" , if Colorbars == 3 then Color.PLUM else Color.UPTICK, no); AddChartBubble((barnumber and D1), if isUp then low else high, if showarrows and signal < 0 and signal[1] >= 0 then "Reversal:" + high else "" , if Colorbars == 3 then Color.PLUM else Color.DOWNTICK, yes); def revLineTop; def revLineBot; if barnumber and D1 { revLineBot = Double.NaN; revLineTop = high[1]; } else if barnumber and U1 { revLineTop = Double.NaN; revLineBot = low[1]; } else if !IsNaN(revLineBot[1]) and (Colorbars[2] == 2 or Colorbars[1] == 2) { revLineBot = revLineBot[1]; revLineTop = Double.NaN; } else if !IsNaN(revLineTop[1]) and (Colorbars[2] == 1 or Colorbars[1] == 1) { revLineTop = revLineTop[1]; revLineBot = Double.NaN; } else { revLineTop = Double.NaN; revLineBot = Double.NaN; } plot botLine = revLineBot[-1]; botLine.SetDefaultColor(Color.LIGHT_GREEN); plot topLine = revLineTop[-1]; topLine.SetDefaultColor(Color.LIGHT_RED); #Alerts def usealerts = no; #Alert(usealerts and U1, "EI-UP", Alert.BAR, Sound.Bell); #Alert(usealerts and D1, "EI-DOWN", Alert.BAR, Sound.Chimes); #Supply Demand Areas rec data1 = CompoundValue(1, if (EISave == priceh or EISave == pricel) then data1[1] + 1 else data1[1], 0); def datacount1 = (HighestAll(data1) - data1[1]); def numbersuppdemandtoshow = 0; input showSupplyDemand = {default Pivot, Arrow, None}; def idx = if showSupplyDemand == showSupplyDemand.Pivot then 1 else 0; def rLow; def rHigh; if signal crosses 0 { rLow = pricel[idx]; rHigh = priceh[idx]; } else { rLow = rLow[1]; rHigh = rHigh[1]; } def HighLine = if datacount1 <= numbersuppdemandtoshow and showSupplyDemand != showSupplyDemand.None and !IsNaN(close) and rHigh != 0 then rHigh else Double.NaN; def LowLine = if datacount1 <= numbersuppdemandtoshow and showSupplyDemand != showSupplyDemand.None and !IsNaN(close) and rLow != 0 then rLow else Double.NaN; def hlUp = if signal > 0 then HighLine else Double.NaN; def hlDn = if signal < 0 then HighLine else Double.NaN; def showsupplydemandcloud = no; AddCloud(if showsupplydemandcloud then hlUp else Double.NaN, LowLine, Color.LIGHT_GREEN, Color.LIGHT_GREEN); AddCloud(if showsupplydemandcloud then hlDn else Double.NaN, LowLine, Color.LIGHT_RED, Color.LIGHT_RED); #Store Previous Data def EIsave1 = if !IsNaN(EISave) then EISave else EIsave1[1]; def EIsave2 = EIsave1; rec priorEI1 = if EIsave2 != EIsave2[1] then EIsave2[1] else priorEI1[1]; rec priorEI2 = if priorEI1 != priorEI1[1] then priorEI1[1] else priorEI2[1]; rec priorEI3 = if priorEI2 != priorEI2[1] then priorEI2[1] else priorEI3[1]; #Fibonacci Extensions rec data = CompoundValue(1, if (EISave == priceh or EISave == pricel) then data[1] + 1 else data[1], 0); def datacount = (HighestAll(data) - data[1]); def numberextfibstoshow = 2; rec cpo = if dir[1] != dir then 0 else 1; def showFibExtLines = no; def showtodayonly = no; def today = if showtodayonly == yes then GetDay() == GetLastDay() else GetDay(); def extfib1 = if EISave == priceh then priceh - AbsValue(priorEI2 - priorEI1) * 1 else extfib1[1]; def extfib100 = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib1) and dir < 0 and cpo != 0 then extfib1[1] else Double.NaN; def extfib1a = if EISave == priceh then priceh - AbsValue(priorEI2 - priorEI1) * 0.382 else extfib1a[1]; def extfib382 = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib1a) and dir < 0 and cpo != 0 then extfib1a[1] else Double.NaN; def extfib2 = if EISave == priceh then priceh - AbsValue(priorEI2 - priorEI1) * 0.618 else extfib2[1]; def extfib618 = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib2) and dir < 0 and cpo != 0 then extfib2[1] else Double.NaN; def extfib3 = if EISave == priceh then priceh - AbsValue(priorEI2 - priorEI1) * 1.618 else extfib3[1]; def extfib1618 = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib3) and dir < 0 and cpo != 0 then extfib3[1] else Double.NaN; def extfib3a = if EISave == priceh then priceh - AbsValue(priorEI2 - priorEI1) * 2.000 else extfib3a[1]; def extfib2000 = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib3a) and dir < 0 and cpo != 0 then extfib3a[1] else Double.NaN; def extfib4 = if EISave == priceh then priceh - AbsValue(priorEI2 - priorEI1) * 2.618 else extfib4[1]; def extfib2618 = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib4) and dir < 0 and cpo != 0 then extfib4[1] else Double.NaN; def extfib5 = if EISave == priceh then priceh - AbsValue(priorEI2 - priorEI1) * 3.618 else extfib5[1]; def extfib3618 = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib5) and dir < 0 and cpo != 0 then extfib5[1] else Double.NaN; def extfib1_ = if EISave == pricel then pricel + AbsValue(priorEI2 - priorEI1) * 1 else extfib1_[1]; def extfib100_ = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib1_) and dir > 0 and cpo != 0 then extfib1_[1] else Double.NaN; def extfib1a_ = if EISave == pricel then pricel + AbsValue(priorEI2 - priorEI1) * 0.382 else extfib1a_[1]; def extfib382_ = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib1a_) and dir > 0 and cpo != 0 then extfib1a_[1] else Double.NaN; def extfib2_ = if EISave == pricel then pricel + AbsValue(priorEI2 - priorEI1) * 0.618 else extfib2_[1]; def extfib618_ = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib2_) and dir > 0 and cpo != 0 then extfib2_[1] else Double.NaN; def extfib3_ = if EISave == pricel then pricel + AbsValue(priorEI2 - priorEI1) * 1.618 else extfib3_[1]; def extfib1618_ = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib3_) and dir > 0 and cpo != 0 then extfib3_[1] else Double.NaN; def extfib3a_ = if EISave == pricel then pricel + AbsValue(priorEI2 - priorEI1) * 2.000 else extfib3a_[1]; def extfib2000_ = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib3a_) and dir > 0 and cpo != 0 then extfib3a_[1] else Double.NaN; def extfib4_ = if EISave == pricel then pricel + AbsValue(priorEI2 - priorEI1) * 2.618 else extfib4_[1]; def extfib2618_ = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib4_) and dir > 0 and cpo != 0 then extfib4_[1] else Double.NaN; def extfib5_ = if EISave == pricel then pricel + AbsValue(priorEI2 - priorEI1) * 3.618 else extfib5_[1]; def extfib3618_ = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib5_) and dir > 0 and cpo != 0 then extfib5_[1] else Double.NaN; def fibextbubblespacesinexpansion = 8; def b = fibextbubblespacesinexpansion; def direction = if !isUp then 1 else 0; AddChartBubble( direction[b + 1] == 1 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib1[b + 2], "100%", Color.RED, no); AddChartBubble( direction[b + 1] == 1 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib1a[b + 2], "38.2%", Color.RED, no); AddChartBubble( direction[b + 1] == 1 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib2[b + 2], "61.8%", Color.RED, no); AddChartBubble( direction[b + 1] == 1 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib3[b + 2], "161.8%", Color.RED, no); AddChartBubble( direction[b + 1] == 1 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib3a[b + 2], "200%", Color.RED, no); AddChartBubble( direction[b + 1] == 1 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib4[b + 2], "261.8%", Color.RED, no); AddChartBubble( direction[b + 1] == 1 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib5[b + 2], "361.8%", Color.RED, no); AddChartBubble( direction[b + 1] == 0 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib1_[b + 2], "100%", Color.GREEN, yes); AddChartBubble( direction[b + 1] == 0 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib1a_[b + 2], "38.2%", Color.GREEN, yes); AddChartBubble( direction[b + 1] == 0 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib2_[b + 2], "61.8%", Color.GREEN, yes); AddChartBubble( direction[b + 1] == 0 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib3_[b + 2], "161.8%", Color.GREEN, yes); AddChartBubble( direction[b + 1] == 0 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib3a_[b + 2], "200%", Color.GREEN, yes); AddChartBubble( direction[b + 1] == 0 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib4_[b + 2], "261.8%", Color.GREEN, yes); AddChartBubble( direction[b + 1] == 0 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib5_[b + 2], "361.8%", Color.GREEN, yes); #Volume at Reversals def vol = if BarNumber() == 0 then 0 else volume + vol[1]; def vol1 = if BarNumber() == 1 then volume else vol1[1]; def xxvol = if EISave == priceh or EISave == pricel then TotalSum(volume) else xxvol[1]; def chgvol = if xxvol - xxvol[1] + vol1 == vol then vol else xxvol - xxvol[1]; def showBubblesVolume = no; AddChartBubble(showBubblesVolume and !IsNaN(EI) and BarNumber() != 1, if isUp then priceh * (1 + bubbleoffset) else pricel * (1 - bubbleoffset), chgvol, if isUp and chghigh > 0 then Color.GREEN else if isUp and chghigh < 0 then Color.RED else if isUp then Color.YELLOW else if !isUp and chglow > 0 then Color.GREEN else if !isUp and chglow < 0 then Color.RED else Color.YELLOW, if isUp then yes else no ); input usemanualfibskip = no;#Hint usemanualfibskip: Select no to use preprogrammed fibskip amounts. Select no, to use the amount entered at input fibskip. input fibskip = .50;#Hint fibskip: Set input usemanualfibskip == yes to use this amount versus preprogrammed amounts. Standard is 1.0. This is percentage difference between fib high and low before a new fib grid created. def showBubblesfibratio = no; def showFibLabel = no;#Hint showfibLabel: Select yes to show label of current fib level as of last price def showfiblines = no; def fib1level = .236; def fib2level = .382; def fibMlevel = .500; def fib3level = .618; def fib4level = .786; #Fibs def datacount2 = (HighestAll(data1) - data1[1]); def numberfibretracementstoshow = 2; def fibskipit = if usemanualfibskip == no then if close > 800 then .25 else .5 else fibskip; def EIfibh = if EISave == priceh and AbsValue(EISave - EISave[1]) > priceh * fibskipit * .01 then priceh else EIfibh[1]; def EIfibl = if EISave == pricel and AbsValue(EISave - EISave[1]) > priceh * fibskipit * .01 then pricel else EIfibl[1]; def range = EIfibh - EIfibl; def fibH = if showfiblines == no then Double.NaN else if datacount2 <= numberfibretracementstoshow then EIfibh else Double.NaN; def fibL = if showfiblines == no then Double.NaN else if datacount2 <= numberfibretracementstoshow then EIfibl else Double.NaN; def fibM = if showfiblines == no then Double.NaN else if datacount2 <= numberfibretracementstoshow then EIfibl + range * fibMlevel else Double.NaN; def fib1 = if showfiblines == no then Double.NaN else if datacount2 <= numberfibretracementstoshow then EIfibl + range * fib1level else Double.NaN; def fib2 = if showfiblines == no then Double.NaN else if datacount2 <= numberfibretracementstoshow then EIfibl + range * fib2level else Double.NaN; def fib3 = if showfiblines == no then Double.NaN else if datacount2 <= numberfibretracementstoshow then EIfibl + range * fib3level else Double.NaN; def fib4 = if showfiblines == no then Double.NaN else if datacount2 <= numberfibretracementstoshow then EIfibl + range * fib4level else Double.NaN; AddLabel(showFibLabel, Concat( "Current Fib Level ", AsPercent((close - EIfibl) / (range))), if close > EIfibl then Color.GREEN else if EIfibh == close then Color.WHITE else Color.RED); AddChartBubble(showBubblesfibratio and !IsNaN(EI) and BarNumber() != 1, if isUp then priceh * (1 + bubbleoffset) else pricel * (1 - bubbleoffset) , if isUp then AsPercent((priceh - EIfibl) / (range)) else AsPercent((pricel - EIfibl) / range), if isUp and chghigh > 0 then Color.GREEN else if isUp and chghigh < 0 then Color.RED else if isUp then Color.GREEN else if !isUp and chglow > 0 then Color.GREEN else if !isUp and chglow < 0 then Color.RED else Color.RED, isUp);
 
Sort by date Sort by votes

Join useThinkScript to post your question to a community of 21,000+ developers and traders.

SIGN UP NOW LEARN MORE
Mattyb740 said:
When I copy/paste this code it says “at least one plot be defined”

I am not experienced or educated enough and was hoping someone could help me! Thanks




def price = close; def superfast_length = 9; def fast_length = 14; def slow_length = 21; def displace = 0; def mov_avg9 = ExpAverage(price[-displace], superfast_length); def mov_avg14 = ExpAverage(price[-displace], fast_length); def mov_avg21 = ExpAverage(price[-displace], slow_length); #moving averages def Superfast = mov_avg9; def Fast = mov_avg14; def Slow = mov_avg21; def buy = mov_avg9 > mov_avg14 and mov_avg14 > mov_avg21 and low > mov_avg9; def stopbuy = mov_avg9 <= mov_avg14; def buynow = !buy[1] and buy; def buysignal = CompoundValue(1, if buynow and !stopbuy then 1 else if buysignal[1] == 1 and stopbuy then 0 else buysignal[1], 0); def Buy_Signal = buysignal[1] == 0 and buysignal == 1; #Alert(condition = buysignal[1] == 0 and buysignal == 1, text = "Buy Signal", sound = Sound.Bell, "alert type" = Alert.BAR); def Momentum_Down = buysignal[1] == 1 and buysignal == 0; #Alert(condition = buysignal[1] == 1 and buysignal == 0, text = "Momentum_Down", sound = Sound.Bell, "alert type" = Alert.BAR); def sell = mov_avg9 < mov_avg14 and mov_avg14 < mov_avg21 and high < mov_avg9; def stopsell = mov_avg9 >= mov_avg14; def sellnow = !sell[1] and sell; def sellsignal = CompoundValue(1, if sellnow and !stopsell then 1 else if sellsignal[1] == 1 and stopsell then 0 else sellsignal[1], 0); def Sell_Signal = sellsignal[1] == 0 and sellsignal; #Alert(condition = sellsignal[1] == 0 and sellsignal == 1, text = "Sell Signal", sound = Sound.Bell, "alert type" = Alert.BAR); def Momentum_Up = sellsignal[1] == 1 and sellsignal == 0; #Alert(condition = sellsignal[1] == 1 and sellSignal == 0, text = "Momentum_Up", sound = Sound.Bell, "alert type" = Alert.BAR); plot Colorbars = if buysignal == 1 then 1 else if sellsignal == 1 then 2 else if buysignal == 0 or sellsignal == 0 then 3 else 0; Colorbars.Hide(); Colorbars.DefineColor("Buy_Signal_Bars", Color.GREEN); Colorbars.DefineColor("Sell_Signal_Bars", Color.RED); Colorbars.DefineColor("Neutral", Color.PLUM); #___________________________________________________________________________ input method = {default average, high_low}; def bubbleoffset = .0005; def percentamount = .01; def revAmount = .05; def atrreversal = 2.0; def atrlength = 5; def pricehigh = high; def pricelow = low; def averagelength = 5; def averagetype = AverageType.EXPONENTIAL; def mah = MovingAverage(averagetype, pricehigh, averagelength); def mal = MovingAverage(averagetype, pricelow, averagelength); def priceh = if method == method.high_low then pricehigh else mah; def pricel = if method == method.high_low then pricelow else mal; def EI = ZigZagHighLow("price h" = priceh, "price l" = pricel, "percentage reversal" = percentamount, "absolute reversal" = revAmount, "atr length" = atrlength, "atr reversal" = atrreversal); def reversalAmount = if (close * percentamount / 100) > Max(revAmount < atrreversal * reference ATR(atrlength), revAmount) then (close * percentamount / 100) else if revAmount < atrreversal * reference ATR(atrlength) then atrreversal * reference ATR(atrlength) else revAmount; rec EISave = if !IsNaN(EI) then EI else GetValue(EISave, 1); def chg = (if EISave == priceh then priceh else pricel) - GetValue(EISave, 1); def isUp = chg >= 0; rec isConf = AbsValue(chg) >= reversalAmount or (IsNaN(GetValue(EI, 1)) and GetValue(isConf, 1)); def EId = if isUp then 1 else 0; #plot EnhancedLines = if EId <= 1 then EI else Double.NaN; #EnhancedLines.AssignValueColor(if EId == 1 then Color.GREEN else if EId == 0 then Color.RED else Color.DARK_ORANGE); #EnhancedLines.SetStyle(Curve.FIRM); #EnhancedLines.EnableApproximation(); #EnhancedLines.HideBubble(); #Price Change between Enhanceds def xxhigh = if EISave == priceh then priceh else xxhigh[1]; def chghigh = priceh - xxhigh[1]; def xxlow = if EISave == pricel then pricel else xxlow[1]; def chglow = pricel - xxlow[1]; def showBubbleschange = no; AddChartBubble(showBubbleschange and !IsNaN(EI) and BarNumber() != 1, if isUp then priceh * (1 + bubbleoffset) else pricel * (1 - bubbleoffset) , "$" + chg , if isUp and chghigh > 0 then Color.GREEN else if isUp and chghigh < 0 then Color.RED else if isUp then Color.YELLOW else if !isUp and chglow > 0 then Color.GREEN else if !isUp and chglow < 0 then Color.RED else Color.YELLOW, isUp); #Price at High/Low def showBubblesprice = no; AddChartBubble(showBubblesprice and !IsNaN(EI) and BarNumber() != 1, if isUp then priceh * (1 + bubbleoffset) else pricel * (1 - bubbleoffset) , if isUp then "$" + priceh else "$" + pricel , if isUp and chghigh > 0 then Color.GREEN else if isUp and chghigh < 0 then Color.RED else if isUp then Color.YELLOW else if !isUp and chglow > 0 then Color.GREEN else if !isUp and chglow < 0 then Color.RED else Color.YELLOW, isUp); #Label for Confirmed/Unconfirmed Status of Current Enhanced #Bar Count between Enhanceds rec EIcount = if EISave[1] != EISave then 1 else if EISave[1] == EISave then EIcount[1] + 1 else 0; def EIcounthilo = if EIcounthilo[1] == 0 and (EISave == priceh or EISave == pricel) then 1 else if EISave == priceh or EISave == pricel then EIcounthilo[1] + 1 else EIcounthilo[1]; def EIhilo = if EISave == priceh or EISave == pricel then EIcounthilo else EIcounthilo + 1; def EIcounthigh = if EISave == priceh then EIcount[1] else Double.NaN; def EIcountlow = if EISave == pricel then EIcount[1] else Double.NaN; def showBubblesbarcount = no; AddChartBubble(showBubblesbarcount and !IsNaN(EI) and BarNumber() != 1, if isUp then priceh * (1 + bubbleoffset) else pricel * (1 - bubbleoffset) , if EISave == priceh then EIcounthigh else EIcountlow, if isUp and chghigh > 0 then Color.GREEN else if isUp and chghigh < 0 then Color.RED else if isUp then Color.YELLOW else if !isUp and chglow > 0 then Color.GREEN else if !isUp and chglow < 0 then Color.RED else Color.YELLOW, if isUp then yes else no ); #Arrows def EIL = if !IsNaN(EI) and !isUp then pricel else GetValue(EIL, 1); def EIH = if !IsNaN(EI) and isUp then priceh else GetValue(EIH, 1); def dir = CompoundValue(1, if EIL != EIL[1] or pricel == EIL[1] and pricel == EISave then 1 else if EIH != EIH[1] or priceh == EIH[1] and priceh == EISave then -1 else dir[1], 0); def signal = CompoundValue(1, if dir > 0 and pricel > EIL then if signal[1] <= 0 then 1 else signal[1] else if dir < 0 and priceh < EIH then if signal[1] >= 0 then -1 else signal[1] else signal[1], 0); def showarrows = yes; def U1 = showarrows and signal > 0 and signal[1] <= 0; #U1.SetPaintingStrategy(PaintingStrategy.BOOLEAN_ARROW_UP); #U1.SetDefaultColor(Color.GREEN); #U1.SetLineWeight(4); def D1 = showarrows and signal < 0 and signal[1] >= 0; #D1.SetPaintingStrategy(PaintingStrategy.BOOLEAN_ARROW_DOWN); #D1.SetDefaultColor(Color.RED); #D1.SetLineWeight(4); def barnumber = BarNumber()[10]; AddChartBubble((barnumber and U1), if isUp then low else high, if showarrows and signal > 0 and signal[1] <= 0 then "Reversal:" + low else "" , if Colorbars == 3 then Color.PLUM else Color.UPTICK, no); AddChartBubble((barnumber and D1), if isUp then low else high, if showarrows and signal < 0 and signal[1] >= 0 then "Reversal:" + high else "" , if Colorbars == 3 then Color.PLUM else Color.DOWNTICK, yes); def revLineTop; def revLineBot; if barnumber and D1 { revLineBot = Double.NaN; revLineTop = high[1]; } else if barnumber and U1 { revLineTop = Double.NaN; revLineBot = low[1]; } else if !IsNaN(revLineBot[1]) and (Colorbars[2] == 2 or Colorbars[1] == 2) { revLineBot = revLineBot[1]; revLineTop = Double.NaN; } else if !IsNaN(revLineTop[1]) and (Colorbars[2] == 1 or Colorbars[1] == 1) { revLineTop = revLineTop[1]; revLineBot = Double.NaN; } else { revLineTop = Double.NaN; revLineBot = Double.NaN; } plot botLine = revLineBot[-1]; botLine.SetDefaultColor(Color.LIGHT_GREEN); plot topLine = revLineTop[-1]; topLine.SetDefaultColor(Color.LIGHT_RED); #Alerts def usealerts = no; #Alert(usealerts and U1, "EI-UP", Alert.BAR, Sound.Bell); #Alert(usealerts and D1, "EI-DOWN", Alert.BAR, Sound.Chimes); #Supply Demand Areas rec data1 = CompoundValue(1, if (EISave == priceh or EISave == pricel) then data1[1] + 1 else data1[1], 0); def datacount1 = (HighestAll(data1) - data1[1]); def numbersuppdemandtoshow = 0; input showSupplyDemand = {default Pivot, Arrow, None}; def idx = if showSupplyDemand == showSupplyDemand.Pivot then 1 else 0; def rLow; def rHigh; if signal crosses 0 { rLow = pricel[idx]; rHigh = priceh[idx]; } else { rLow = rLow[1]; rHigh = rHigh[1]; } def HighLine = if datacount1 <= numbersuppdemandtoshow and showSupplyDemand != showSupplyDemand.None and !IsNaN(close) and rHigh != 0 then rHigh else Double.NaN; def LowLine = if datacount1 <= numbersuppdemandtoshow and showSupplyDemand != showSupplyDemand.None and !IsNaN(close) and rLow != 0 then rLow else Double.NaN; def hlUp = if signal > 0 then HighLine else Double.NaN; def hlDn = if signal < 0 then HighLine else Double.NaN; def showsupplydemandcloud = no; AddCloud(if showsupplydemandcloud then hlUp else Double.NaN, LowLine, Color.LIGHT_GREEN, Color.LIGHT_GREEN); AddCloud(if showsupplydemandcloud then hlDn else Double.NaN, LowLine, Color.LIGHT_RED, Color.LIGHT_RED); #Store Previous Data def EIsave1 = if !IsNaN(EISave) then EISave else EIsave1[1]; def EIsave2 = EIsave1; rec priorEI1 = if EIsave2 != EIsave2[1] then EIsave2[1] else priorEI1[1]; rec priorEI2 = if priorEI1 != priorEI1[1] then priorEI1[1] else priorEI2[1]; rec priorEI3 = if priorEI2 != priorEI2[1] then priorEI2[1] else priorEI3[1]; #Fibonacci Extensions rec data = CompoundValue(1, if (EISave == priceh or EISave == pricel) then data[1] + 1 else data[1], 0); def datacount = (HighestAll(data) - data[1]); def numberextfibstoshow = 2; rec cpo = if dir[1] != dir then 0 else 1; def showFibExtLines = no; def showtodayonly = no; def today = if showtodayonly == yes then GetDay() == GetLastDay() else GetDay(); def extfib1 = if EISave == priceh then priceh - AbsValue(priorEI2 - priorEI1) * 1 else extfib1[1]; def extfib100 = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib1) and dir < 0 and cpo != 0 then extfib1[1] else Double.NaN; def extfib1a = if EISave == priceh then priceh - AbsValue(priorEI2 - priorEI1) * 0.382 else extfib1a[1]; def extfib382 = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib1a) and dir < 0 and cpo != 0 then extfib1a[1] else Double.NaN; def extfib2 = if EISave == priceh then priceh - AbsValue(priorEI2 - priorEI1) * 0.618 else extfib2[1]; def extfib618 = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib2) and dir < 0 and cpo != 0 then extfib2[1] else Double.NaN; def extfib3 = if EISave == priceh then priceh - AbsValue(priorEI2 - priorEI1) * 1.618 else extfib3[1]; def extfib1618 = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib3) and dir < 0 and cpo != 0 then extfib3[1] else Double.NaN; def extfib3a = if EISave == priceh then priceh - AbsValue(priorEI2 - priorEI1) * 2.000 else extfib3a[1]; def extfib2000 = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib3a) and dir < 0 and cpo != 0 then extfib3a[1] else Double.NaN; def extfib4 = if EISave == priceh then priceh - AbsValue(priorEI2 - priorEI1) * 2.618 else extfib4[1]; def extfib2618 = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib4) and dir < 0 and cpo != 0 then extfib4[1] else Double.NaN; def extfib5 = if EISave == priceh then priceh - AbsValue(priorEI2 - priorEI1) * 3.618 else extfib5[1]; def extfib3618 = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib5) and dir < 0 and cpo != 0 then extfib5[1] else Double.NaN; def extfib1_ = if EISave == pricel then pricel + AbsValue(priorEI2 - priorEI1) * 1 else extfib1_[1]; def extfib100_ = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib1_) and dir > 0 and cpo != 0 then extfib1_[1] else Double.NaN; def extfib1a_ = if EISave == pricel then pricel + AbsValue(priorEI2 - priorEI1) * 0.382 else extfib1a_[1]; def extfib382_ = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib1a_) and dir > 0 and cpo != 0 then extfib1a_[1] else Double.NaN; def extfib2_ = if EISave == pricel then pricel + AbsValue(priorEI2 - priorEI1) * 0.618 else extfib2_[1]; def extfib618_ = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib2_) and dir > 0 and cpo != 0 then extfib2_[1] else Double.NaN; def extfib3_ = if EISave == pricel then pricel + AbsValue(priorEI2 - priorEI1) * 1.618 else extfib3_[1]; def extfib1618_ = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib3_) and dir > 0 and cpo != 0 then extfib3_[1] else Double.NaN; def extfib3a_ = if EISave == pricel then pricel + AbsValue(priorEI2 - priorEI1) * 2.000 else extfib3a_[1]; def extfib2000_ = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib3a_) and dir > 0 and cpo != 0 then extfib3a_[1] else Double.NaN; def extfib4_ = if EISave == pricel then pricel + AbsValue(priorEI2 - priorEI1) * 2.618 else extfib4_[1]; def extfib2618_ = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib4_) and dir > 0 and cpo != 0 then extfib4_[1] else Double.NaN; def extfib5_ = if EISave == pricel then pricel + AbsValue(priorEI2 - priorEI1) * 3.618 else extfib5_[1]; def extfib3618_ = if datacount <= numberextfibstoshow and today and showFibExtLines and !IsNaN(extfib5_) and dir > 0 and cpo != 0 then extfib5_[1] else Double.NaN; def fibextbubblespacesinexpansion = 8; def b = fibextbubblespacesinexpansion; def direction = if !isUp then 1 else 0; AddChartBubble( direction[b + 1] == 1 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib1[b + 2], "100%", Color.RED, no); AddChartBubble( direction[b + 1] == 1 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib1a[b + 2], "38.2%", Color.RED, no); AddChartBubble( direction[b + 1] == 1 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib2[b + 2], "61.8%", Color.RED, no); AddChartBubble( direction[b + 1] == 1 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib3[b + 2], "161.8%", Color.RED, no); AddChartBubble( direction[b + 1] == 1 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib3a[b + 2], "200%", Color.RED, no); AddChartBubble( direction[b + 1] == 1 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib4[b + 2], "261.8%", Color.RED, no); AddChartBubble( direction[b + 1] == 1 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib5[b + 2], "361.8%", Color.RED, no); AddChartBubble( direction[b + 1] == 0 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib1_[b + 2], "100%", Color.GREEN, yes); AddChartBubble( direction[b + 1] == 0 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib1a_[b + 2], "38.2%", Color.GREEN, yes); AddChartBubble( direction[b + 1] == 0 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib2_[b + 2], "61.8%", Color.GREEN, yes); AddChartBubble( direction[b + 1] == 0 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib3_[b + 2], "161.8%", Color.GREEN, yes); AddChartBubble( direction[b + 1] == 0 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib3a_[b + 2], "200%", Color.GREEN, yes); AddChartBubble( direction[b + 1] == 0 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib4_[b + 2], "261.8%", Color.GREEN, yes); AddChartBubble( direction[b + 1] == 0 and showFibExtLines and !IsNaN(close[b + 1]) and IsNaN(close), extfib5_[b + 2], "361.8%", Color.GREEN, yes); #Volume at Reversals def vol = if BarNumber() == 0 then 0 else volume + vol[1]; def vol1 = if BarNumber() == 1 then volume else vol1[1]; def xxvol = if EISave == priceh or EISave == pricel then TotalSum(volume) else xxvol[1]; def chgvol = if xxvol - xxvol[1] + vol1 == vol then vol else xxvol - xxvol[1]; def showBubblesVolume = no; AddChartBubble(showBubblesVolume and !IsNaN(EI) and BarNumber() != 1, if isUp then priceh * (1 + bubbleoffset) else pricel * (1 - bubbleoffset), chgvol, if isUp and chghigh > 0 then Color.GREEN else if isUp and chghigh < 0 then Color.RED else if isUp then Color.YELLOW else if !isUp and chglow > 0 then Color.GREEN else if !isUp and chglow < 0 then Color.RED else Color.YELLOW, if isUp then yes else no ); input usemanualfibskip = no;#Hint usemanualfibskip: Select no to use preprogrammed fibskip amounts. Select no, to use the amount entered at input fibskip. input fibskip = .50;#Hint fibskip: Set input usemanualfibskip == yes to use this amount versus preprogrammed amounts. Standard is 1.0. This is percentage difference between fib high and low before a new fib grid created. def showBubblesfibratio = no; def showFibLabel = no;#Hint showfibLabel: Select yes to show label of current fib level as of last price def showfiblines = no; def fib1level = .236; def fib2level = .382; def fibMlevel = .500; def fib3level = .618; def fib4level = .786; #Fibs def datacount2 = (HighestAll(data1) - data1[1]); def numberfibretracementstoshow = 2; def fibskipit = if usemanualfibskip == no then if close > 800 then .25 else .5 else fibskip; def EIfibh = if EISave == priceh and AbsValue(EISave - EISave[1]) > priceh * fibskipit * .01 then priceh else EIfibh[1]; def EIfibl = if EISave == pricel and AbsValue(EISave - EISave[1]) > priceh * fibskipit * .01 then pricel else EIfibl[1]; def range = EIfibh - EIfibl; def fibH = if showfiblines == no then Double.NaN else if datacount2 <= numberfibretracementstoshow then EIfibh else Double.NaN; def fibL = if showfiblines == no then Double.NaN else if datacount2 <= numberfibretracementstoshow then EIfibl else Double.NaN; def fibM = if showfiblines == no then Double.NaN else if datacount2 <= numberfibretracementstoshow then EIfibl + range * fibMlevel else Double.NaN; def fib1 = if showfiblines == no then Double.NaN else if datacount2 <= numberfibretracementstoshow then EIfibl + range * fib1level else Double.NaN; def fib2 = if showfiblines == no then Double.NaN else if datacount2 <= numberfibretracementstoshow then EIfibl + range * fib2level else Double.NaN; def fib3 = if showfiblines == no then Double.NaN else if datacount2 <= numberfibretracementstoshow then EIfibl + range * fib3level else Double.NaN; def fib4 = if showfiblines == no then Double.NaN else if datacount2 <= numberfibretracementstoshow then EIfibl + range * fib4level else Double.NaN; AddLabel(showFibLabel, Concat( "Current Fib Level ", AsPercent((close - EIfibl) / (range))), if close > EIfibl then Color.GREEN else if EIfibh == close then Color.WHITE else Color.RED); AddChartBubble(showBubblesfibratio and !IsNaN(EI) and BarNumber() != 1, if isUp then priceh * (1 + bubbleoffset) else pricel * (1 - bubbleoffset) , if isUp then AsPercent((priceh - EIfibl) / (range)) else AsPercent((pricel - EIfibl) / range), if isUp and chghigh > 0 then Color.GREEN else if isUp and chghigh < 0 then Color.RED else if isUp then Color.GREEN else if !isUp and chglow > 0 then Color.GREEN else if !isUp and chglow < 0 then Color.RED else Color.RED, isUp);
Click to expand...

where are you trying to paste this code? in a watchlist? or a scan?
it doesn't have any plots, so it won't work

if you copied all of the original, it should work on a chart.

is this where you got the code?
https://usethinkscript.com/threads/trend-reversal-with-signals.16681/

next time, paste code in a code window , </> in header
 
Upvote 0 Downvote
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
V please help first 15 min candle Questions 2
METAL Please help to get horizontal lines to plot. Questions 1
J Please help creating a custom alert based on this.... Questions 1
J Please help me figure out this possible ToS glitch Questions 2
R Can anyone help me get the color for the 3rd cloud please Questions 4

Similar threads

Not the exact question you're looking for?

Start a new thread and receive assistance from our community.

87k+ Posts
303 Online
Create Post

Similar threads

Similar threads

The Market Trading Game Changer

Join 2,500+ subscribers inside the useThinkScript VIP Membership Club
  • Exclusive indicators
  • Proven strategies & setups
  • Private Discord community
  • ‘Buy The Dip’ signal alerts
  • Exclusive members-only content
  • Add-ons and resources
  • 1 full year of unlimited support
Try VIP Club Today

Frequently Asked Questions

What is useThinkScript?

useThinkScript is the #1 community of stock market investors using indicators and other tools to power their trading strategies. Traders of all skill levels use our forums to learn about scripting and indicators, help each other, and discover new ways to gain an edge in the markets.

How do I get started?

We get it. Our forum can be intimidating, if not overwhelming. With thousands of topics, tens of thousands of posts, our community has created an incredibly deep knowledge base for stock traders. No one can ever exhaust every resource provided on our site.

If you are new, or just looking for guidance, here are some helpful links to get you started.

What are the benefits of VIP Membership?
VIP members get exclusive access to these proven and tested premium indicators: Buy the Dip, Advanced Market Moves 2.0, Take Profit, and Volatility Trading Range. In addition, VIP members get access to over 50 VIP-only custom indicators, add-ons, and strategies, private VIP-only forums, private Discord channel to discuss trades and strategies in real-time, customer support, trade alerts, and much more. Learn all about VIP membership here.
How can I access the premium indicators?
To access the premium indicators, which are plug and play ready, sign up for VIP membership here.
Back
Top