# RepaintsLows To Highs with Fibonacci Retracement Indicator for ThinkorSwim

Repaints

#### SleepyZ

##### Moderator - Expert
VIP
Has anyone seen a auto Fibonacci extensions study for swing low to swing high..Thanks
Here is code for Swing High/Low with options to show all swings or last swing, fib levels, number of swings to display fib1 levels, and chart bubbles identifying swings and fib1 levels. The fib bubbles can moved left/right in the expansion by the number of bars at the input: bubble_mover
Code:
``````#SwingHL_Fibs
#v1    - 01.19.2020 - BLT - Swing High/Low with options to show all swings or last swing, fib levels, number of swings to display fib levels, and chart bubbles identifying swings and fib levels. The fib bubbles can be moved left/right in the expansion by the number of bars at the input: bubble_mover
#v1.2  - 01.19.2020 - BLT - Made fib bubbles automatically reflect fib level inputs, which were hard coded in v1
#v1.3  = 01.20.2020 - BLT - Added more fib lines, adjusted fib levels based upon whether r2 is 100%, and extended fib lines into all of expansion

input showlastswing = yes;
input swing_back1 = 5;
input swing_forward1 = 5;
input maxbars1 = 30;

def na = Double.NaN;
def bn = barnumber();
def sb1 = swing_back1;
def sf1 = swing_forward1;
def lfor1 = Lowest(low, sf1)[-sf1];
def lback1 = Lowest(low, sb1)[1];
def swinglow1 = if low < lfor1 and low < lback1 then 1 else 0;
def swinglowbar = if low < lfor1 and low < lback1 then bn else na;
def hfor1  = Highest(high, sf1)[-sf1];
def hback1 = Highest(high, sb1)[1];
def swinghigh1   = if high > hfor1 and high > hback1 then 1 else 0;
def swinghighbar = if high > hfor1 and high > hback1 then bn else na;
def lastswing    = highestall(swinghighbar)>highestall(swinglowbar);

#Swings identifed as points
plot r2 = if showlastswing ==yes and bn==highestall(swinghighbar) then high else if showlastswing == no and swinghigh1 then high else na;
plot s2 = if showlastswing == yes and bn==highestall(swinglowbar) then low else if showlastswing == no and swinglow1 then low else na;

r2.SetStyle(Curve.POINTS);
r2.SetLineWeight(4);
r2.SetDefaultColor(Color.GREEN);
r2.HideBubble();
s2.SetStyle(Curve.POINTS);
s2.SetLineWeight(4);
s2.SetDefaultColor(Color.RED);
s2.HideBubble();

input bubbleoffsetfactor  = 3;
input showbubbles_r2s2    = yes;
AddChartBubble(showbubbles_r2s2 and r2, high + TickSize() * bubbleoffsetfactor, "R2", Color.GREEN, yes);
AddChartBubble(showbubbles_r2s2 and s2, low - TickSize() * bubbleoffsetfactor, "S2", Color.RED, no);

#Store Previous Data
def r2save = if !IsNaN(r2) then r2 else r2save[1];
def s2save = if !IsNaN(s2) then s2 else s2save[1];

#Fibonacci

input numberfibstoshow = 1;

#Retracement Fibonacci Levels
input fib1level           = .236;
input fib2level           = .382;
input fibMlevel           = .500;
input fib3level           = .618;
input fib4level           = .764;

#Extended Fibonacci Levels - These will create complementary extensions below zero as well as those inputs below which are over 1
input showfibextensions   = yes;
input fib5extlevel        = 1.272;
input fib6extlevel        = 1.618;
input fib7extlevel        = 2.618;
input fib8extlevel        = 4.236;

#Fibonacci Lines
def fibh  = r2save;
def fibl  = s2save;
def range = if isnan(close) then range[1] else fibh - fibl;
def data  = CompoundValue(1, if (r2save == high) and range<0 or (s2save == low) and range>0 then data[1] + 1 else data[1], 0);
def datacount = if isnan(close) then datacount[1] else (HighestAll(data) - data[1]) + 1;

input showfiblines = yes;

plot fibHp = r2save;
plot fibLp = s2save;
def fibmext=if !isnan(fibl + range * fibMlevel) then fibmext[1] else fibl + range * fibMlevel;
plot fibM  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fibMlevel else na;
plot fib1  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib1level else na;
plot fib2  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib2level else na;
plot fib3  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib3level else na;
plot fib4  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib4level else na;

plot fib5  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib5extlevel else na;
plot fib6  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib6extlevel else na;
plot fib7  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib7extlevel else na;
plot fib8  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib8extlevel else na;

plot fib5a  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibh + range * -fib5extlevel else na;
plot fib6a  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibh + range * -fib6extlevel else na;
plot fib7a  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibh + range * -fib7extlevel else na;
plot fib8a  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibh + range * -fib8extlevel else na;

fibHp.SetPaintingStrategy(PaintingStrategy.DASHES);
fibLp.SetPaintingStrategy(PaintingStrategy.DASHES);
fibHp.SetLineWeight(2);
fibLp.SetLineWeight(2);
fibM.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib1.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib2.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib3.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib4.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib5.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib6.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib7.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib8.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib5a.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib6a.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib7a.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib8a.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fibHp.SetDefaultColor(Color.GREEN);
fibLp.SetDefaultColor(Color.RED);
fibM.SetDefaultColor(Color.WHITE);
fib1.SetDefaultColor(Color.CYAN);
fib2.SetDefaultColor(Color.YELLOW);
fib3.SetDefaultColor(Color.YELLOW);
fib4.SetDefaultColor(Color.CYAN);
fib5.setdefaultColor(color.yellow);
fib6.setdefaultColor(color.yellow);
fib7.setdefaultColor(color.yellow);
fib8.setdefaultColor(color.yellow);
fib5a.setdefaultColor(color.yellow);
fib6a.setdefaultColor(color.yellow);
fib7a.setdefaultColor(color.yellow);
fib8a.setdefaultColor(color.yellow);

#To Hide Price Bubbles on Right Axis, remove the "#" sign on the following HideBubble() code
#fibM.HideBubble();
#fib1.HideBubble();
#fib2.HideBubble();
#fib3.HideBubble();
#fib4.HideBubble();
#fib5.HideBubble();
#fib6.HideBubble();
#fib7.HideBubble();
#fib8.HideBubble();
#fib5a.HideBubble();
#fib6a.HideBubble();
#fib7a.HideBubble();
#fib8a.HideBubble();

input showfib_bubbles = yes;
input bubble_mover    = 5; #Moves bubbles left/right then number of bars input here
def   n               = bubble_mover;
def   n1              = n +1;
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fibh[n1],  aspercent(if !lastswing then 1 else 0), Color.green, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fibl[n1],  aspercent(if !lastswing then 0 else 1), Color.red, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib1[n1],  if !lastswing then aspercent(fib1level) else aspercent(1-fib1level), Color.cyan, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib2[n1],  if !lastswing then aspercent(fib2level) else aspercent(1-fib2level), Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib3[n1],  if !lastswing then aspercent(fib3level) else aspercent(1-fib3level), Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib4[n1],  if !lastswing then aspercent(fib4level) else aspercent(1-fib4level), Color.cyan, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fibm[n1],  if !lastswing then aspercent(fibmlevel) else aspercent(1-fibmlevel), Color.white, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib5[n1], if lastswing then aspercent(1-fib5extlevel) else aspercent(fib5extlevel) , Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib6[n1], if lastswing then  aspercent(1-fib6extlevel) else aspercent(fib6extlevel), Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib7[n1], if lastswing then aspercent(1-fib7extlevel) else aspercent(fib7extlevel), Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib8[n1], if lastswing then aspercent(1-fib8extlevel) else aspercent(fib8extlevel), Color.yellow, yes);

AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib5a[n1], if lastswing then aspercent(fib5extlevel) else aspercent(1-fib5extlevel) , Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib6a[n1], if lastswing then aspercent(fib6extlevel) else aspercent(1-fib6extlevel), Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib7a[n1], if lastswing then aspercent(fib7extlevel) else aspercent(1-fib7extlevel), Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib8a[n1], if lastswing then aspercent(fib8extlevel) else aspercent(1-fib8extlevel), Color.yellow, yes);``````

Last edited by a moderator:
Here is code for Swing High/Low with options to show all swings or last swing, fib levels, number of swings to display fib1 levels, and chart bubbles identifying swings and fib1 levels. The fib bubbles can moved left/right in the expansion by the number of bars at the input: bubble_mover
Code:
``````#SwingHL_Fibs
#v1    - 01.19.2020 - BLT - Swing High/Low with options to show all swings or last swing, fib levels, number of swings to display fib levels, and chart bubbles identifying swings and fib levels. The fib bubbles can be moved left/right in the expansion by the number of bars at the input: bubble_mover
#v1.2  - 01.19.2020 - BLT - Made fib bubbles automatically reflect fib level inputs, which were hard coded in v1
#v1.3  = 01.20.2020 - BLT - Added more fib lines, adjusted fib levels based upon whether r2 is 100%, and extended fib lines into all of expansion

input showlastswing = yes;
input swing_back1 = 5;
input swing_forward1 = 5;
input maxbars1 = 30;

def na = Double.NaN;
def bn = barnumber();
def sb1 = swing_back1;
def sf1 = swing_forward1;
def lfor1 = Lowest(low, sf1)[-sf1];
def lback1 = Lowest(low, sb1)[1];
def swinglow1 = if low < lfor1 and low < lback1 then 1 else 0;
def swinglowbar = if low < lfor1 and low < lback1 then bn else na;
def hfor1  = Highest(high, sf1)[-sf1];
def hback1 = Highest(high, sb1)[1];
def swinghigh1   = if high > hfor1 and high > hback1 then 1 else 0;
def swinghighbar = if high > hfor1 and high > hback1 then bn else na;
def lastswing    = highestall(swinghighbar)>highestall(swinglowbar);

#Swings identifed as points
plot r2 = if showlastswing ==yes and bn==highestall(swinghighbar) then high else if showlastswing == no and swinghigh1 then high else na;
plot s2 = if showlastswing == yes and bn==highestall(swinglowbar) then low else if showlastswing == no and swinglow1 then low else na;

r2.SetStyle(Curve.POINTS);
r2.SetLineWeight(4);
r2.SetDefaultColor(Color.GREEN);
r2.HideBubble();
s2.SetStyle(Curve.POINTS);
s2.SetLineWeight(4);
s2.SetDefaultColor(Color.RED);
s2.HideBubble();

input bubbleoffsetfactor  = 3;
input showbubbles_r2s2    = yes;
AddChartBubble(showbubbles_r2s2 and r2, high + TickSize() * bubbleoffsetfactor, "R2", Color.GREEN, yes);
AddChartBubble(showbubbles_r2s2 and s2, low - TickSize() * bubbleoffsetfactor, "S2", Color.RED, no);

#Store Previous Data
def r2save = if !IsNaN(r2) then r2 else r2save[1];
def s2save = if !IsNaN(s2) then s2 else s2save[1];

#Fibonacci

input numberfibstoshow = 1;

#Retracement Fibonacci Levels
input fib1level           = .236;
input fib2level           = .382;
input fibMlevel           = .500;
input fib3level           = .618;
input fib4level           = .764;

#Extended Fibonacci Levels - These will create complementary extensions below zero as well as those inputs below which are over 1
input showfibextensions   = yes;
input fib5extlevel        = 1.272;
input fib6extlevel        = 1.618;
input fib7extlevel        = 2.618;
input fib8extlevel        = 4.236;

#Fibonacci Lines
def fibh  = r2save;
def fibl  = s2save;
def range = if isnan(close) then range[1] else fibh - fibl;
def data  = CompoundValue(1, if (r2save == high) and range<0 or (s2save == low) and range>0 then data[1] + 1 else data[1], 0);
def datacount = if isnan(close) then datacount[1] else (HighestAll(data) - data[1]) + 1;

input showfiblines = yes;

plot fibHp = r2save;
plot fibLp = s2save;
def fibmext=if !isnan(fibl + range * fibMlevel) then fibmext[1] else fibl + range * fibMlevel;
plot fibM  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fibMlevel else na;
plot fib1  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib1level else na;
plot fib2  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib2level else na;
plot fib3  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib3level else na;
plot fib4  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib4level else na;

plot fib5  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib5extlevel else na;
plot fib6  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib6extlevel else na;
plot fib7  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib7extlevel else na;
plot fib8  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib8extlevel else na;

plot fib5a  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibh + range * -fib5extlevel else na;
plot fib6a  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibh + range * -fib6extlevel else na;
plot fib7a  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibh + range * -fib7extlevel else na;
plot fib8a  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibh + range * -fib8extlevel else na;

fibHp.SetPaintingStrategy(PaintingStrategy.DASHES);
fibLp.SetPaintingStrategy(PaintingStrategy.DASHES);
fibHp.SetLineWeight(2);
fibLp.SetLineWeight(2);
fibM.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib1.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib2.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib3.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib4.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib5.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib6.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib7.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib8.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib5a.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib6a.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib7a.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib8a.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fibHp.SetDefaultColor(Color.GREEN);
fibLp.SetDefaultColor(Color.RED);
fibM.SetDefaultColor(Color.WHITE);
fib1.SetDefaultColor(Color.CYAN);
fib2.SetDefaultColor(Color.YELLOW);
fib3.SetDefaultColor(Color.YELLOW);
fib4.SetDefaultColor(Color.CYAN);
fib5.setdefaultColor(color.yellow);
fib6.setdefaultColor(color.yellow);
fib7.setdefaultColor(color.yellow);
fib8.setdefaultColor(color.yellow);
fib5a.setdefaultColor(color.yellow);
fib6a.setdefaultColor(color.yellow);
fib7a.setdefaultColor(color.yellow);
fib8a.setdefaultColor(color.yellow);

#To Hide Price Bubbles on Right Axis, remove the "#" sign on the following HideBubble() code
#fibM.HideBubble();
#fib1.HideBubble();
#fib2.HideBubble();
#fib3.HideBubble();
#fib4.HideBubble();
#fib5.HideBubble();
#fib6.HideBubble();
#fib7.HideBubble();
#fib8.HideBubble();
#fib5a.HideBubble();
#fib6a.HideBubble();
#fib7a.HideBubble();
#fib8a.HideBubble();

input showfib_bubbles = yes;
input bubble_mover    = 5; #Moves bubbles left/right then number of bars input here
def   n               = bubble_mover;
def   n1              = n +1;
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fibh[n1],  aspercent(if !lastswing then 1 else 0), Color.green, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fibl[n1],  aspercent(if !lastswing then 0 else 1), Color.red, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib1[n1],  if !lastswing then aspercent(fib1level) else aspercent(1-fib1level), Color.cyan, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib2[n1],  if !lastswing then aspercent(fib2level) else aspercent(1-fib2level), Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib3[n1],  if !lastswing then aspercent(fib3level) else aspercent(1-fib3level), Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib4[n1],  if !lastswing then aspercent(fib4level) else aspercent(1-fib4level), Color.cyan, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fibm[n1],  if !lastswing then aspercent(fibmlevel) else aspercent(1-fibmlevel), Color.white, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib5[n1], if lastswing then aspercent(1-fib5extlevel) else aspercent(fib5extlevel) , Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib6[n1], if lastswing then  aspercent(1-fib6extlevel) else aspercent(fib6extlevel), Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib7[n1], if lastswing then aspercent(1-fib7extlevel) else aspercent(fib7extlevel), Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib8[n1], if lastswing then aspercent(1-fib8extlevel) else aspercent(fib8extlevel), Color.yellow, yes);

AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib5a[n1], if lastswing then aspercent(fib5extlevel) else aspercent(1-fib5extlevel) , Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib6a[n1], if lastswing then aspercent(fib6extlevel) else aspercent(1-fib6extlevel), Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib7a[n1], if lastswing then aspercent(fib7extlevel) else aspercent(1-fib7extlevel), Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib8a[n1], if lastswing then aspercent(fib8extlevel) else aspercent(1-fib8extlevel), Color.yellow, yes);``````
Hi Sleepy. I have imported and looked at some of your code before and it looks great. This one does not allow me no matter which way I import the code it comes up as a flat line with no values (Squashed) instead of Auto fib lines. Could there me something missing in the code I didn't grab or I am not doing? Thanks for sharing your code! Giovanna

Hi Sleepy. I have imported and looked at some of your code before and it looks great. This one does not allow me no matter which way I import the code it comes up as a flat line with no values (Squashed) instead of Auto fib lines. Could there me something missing in the code I didn't grab or I am not doing? Thanks for sharing your code! Giovanna

Try going to chart settings, price axis and make sure all of the boxes on the left are unchecked

Here is code for Swing High/Low with options to show all swings or last swing, fib levels, number of swings to display fib1 levels, and chart bubbles identifying swings and fib1 levels. The fib bubbles can moved left/right in the expansion by the number of bars at the input: bubble_mover
Code:
``````#SwingHL_Fibs
#v1    - 01.19.2020 - BLT - Swing High/Low with options to show all swings or last swing, fib levels, number of swings to display fib levels, and chart bubbles identifying swings and fib levels. The fib bubbles can be moved left/right in the expansion by the number of bars at the input: bubble_mover
#v1.2  - 01.19.2020 - BLT - Made fib bubbles automatically reflect fib level inputs, which were hard coded in v1
#v1.3  = 01.20.2020 - BLT - Added more fib lines, adjusted fib levels based upon whether r2 is 100%, and extended fib lines into all of expansion

input showlastswing = yes;
input swing_back1 = 5;
input swing_forward1 = 5;
input maxbars1 = 30;

def na = Double.NaN;
def bn = barnumber();
def sb1 = swing_back1;
def sf1 = swing_forward1;
def lfor1 = Lowest(low, sf1)[-sf1];
def lback1 = Lowest(low, sb1)[1];
def swinglow1 = if low < lfor1 and low < lback1 then 1 else 0;
def swinglowbar = if low < lfor1 and low < lback1 then bn else na;
def hfor1  = Highest(high, sf1)[-sf1];
def hback1 = Highest(high, sb1)[1];
def swinghigh1   = if high > hfor1 and high > hback1 then 1 else 0;
def swinghighbar = if high > hfor1 and high > hback1 then bn else na;
def lastswing    = highestall(swinghighbar)>highestall(swinglowbar);

#Swings identifed as points
plot r2 = if showlastswing ==yes and bn==highestall(swinghighbar) then high else if showlastswing == no and swinghigh1 then high else na;
plot s2 = if showlastswing == yes and bn==highestall(swinglowbar) then low else if showlastswing == no and swinglow1 then low else na;

r2.SetStyle(Curve.POINTS);
r2.SetLineWeight(4);
r2.SetDefaultColor(Color.GREEN);
r2.HideBubble();
s2.SetStyle(Curve.POINTS);
s2.SetLineWeight(4);
s2.SetDefaultColor(Color.RED);
s2.HideBubble();

input bubbleoffsetfactor  = 3;
input showbubbles_r2s2    = yes;
AddChartBubble(showbubbles_r2s2 and r2, high + TickSize() * bubbleoffsetfactor, "R2", Color.GREEN, yes);
AddChartBubble(showbubbles_r2s2 and s2, low - TickSize() * bubbleoffsetfactor, "S2", Color.RED, no);

#Store Previous Data
def r2save = if !IsNaN(r2) then r2 else r2save[1];
def s2save = if !IsNaN(s2) then s2 else s2save[1];

#Fibonacci

input numberfibstoshow = 1;

#Retracement Fibonacci Levels
input fib1level           = .236;
input fib2level           = .382;
input fibMlevel           = .500;
input fib3level           = .618;
input fib4level           = .764;

#Extended Fibonacci Levels - These will create complementary extensions below zero as well as those inputs below which are over 1
input showfibextensions   = yes;
input fib5extlevel        = 1.272;
input fib6extlevel        = 1.618;
input fib7extlevel        = 2.618;
input fib8extlevel        = 4.236;

#Fibonacci Lines
def fibh  = r2save;
def fibl  = s2save;
def range = if isnan(close) then range[1] else fibh - fibl;
def data  = CompoundValue(1, if (r2save == high) and range<0 or (s2save == low) and range>0 then data[1] + 1 else data[1], 0);
def datacount = if isnan(close) then datacount[1] else (HighestAll(data) - data[1]) + 1;

input showfiblines = yes;

plot fibHp = r2save;
plot fibLp = s2save;
def fibmext=if !isnan(fibl + range * fibMlevel) then fibmext[1] else fibl + range * fibMlevel;
plot fibM  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fibMlevel else na;
plot fib1  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib1level else na;
plot fib2  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib2level else na;
plot fib3  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib3level else na;
plot fib4  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib4level else na;

plot fib5  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib5extlevel else na;
plot fib6  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib6extlevel else na;
plot fib7  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib7extlevel else na;
plot fib8  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib8extlevel else na;

plot fib5a  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibh + range * -fib5extlevel else na;
plot fib6a  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibh + range * -fib6extlevel else na;
plot fib7a  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibh + range * -fib7extlevel else na;
plot fib8a  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibh + range * -fib8extlevel else na;

fibHp.SetPaintingStrategy(PaintingStrategy.DASHES);
fibLp.SetPaintingStrategy(PaintingStrategy.DASHES);
fibHp.SetLineWeight(2);
fibLp.SetLineWeight(2);
fibM.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib1.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib2.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib3.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib4.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib5.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib6.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib7.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib8.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib5a.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib6a.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib7a.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib8a.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fibHp.SetDefaultColor(Color.GREEN);
fibLp.SetDefaultColor(Color.RED);
fibM.SetDefaultColor(Color.WHITE);
fib1.SetDefaultColor(Color.CYAN);
fib2.SetDefaultColor(Color.YELLOW);
fib3.SetDefaultColor(Color.YELLOW);
fib4.SetDefaultColor(Color.CYAN);
fib5.setdefaultColor(color.yellow);
fib6.setdefaultColor(color.yellow);
fib7.setdefaultColor(color.yellow);
fib8.setdefaultColor(color.yellow);
fib5a.setdefaultColor(color.yellow);
fib6a.setdefaultColor(color.yellow);
fib7a.setdefaultColor(color.yellow);
fib8a.setdefaultColor(color.yellow);

#To Hide Price Bubbles on Right Axis, remove the "#" sign on the following HideBubble() code
#fibM.HideBubble();
#fib1.HideBubble();
#fib2.HideBubble();
#fib3.HideBubble();
#fib4.HideBubble();
#fib5.HideBubble();
#fib6.HideBubble();
#fib7.HideBubble();
#fib8.HideBubble();
#fib5a.HideBubble();
#fib6a.HideBubble();
#fib7a.HideBubble();
#fib8a.HideBubble();

input showfib_bubbles = yes;
input bubble_mover    = 5; #Moves bubbles left/right then number of bars input here
def   n               = bubble_mover;
def   n1              = n +1;
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fibh[n1],  aspercent(if !lastswing then 1 else 0), Color.green, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fibl[n1],  aspercent(if !lastswing then 0 else 1), Color.red, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib1[n1],  if !lastswing then aspercent(fib1level) else aspercent(1-fib1level), Color.cyan, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib2[n1],  if !lastswing then aspercent(fib2level) else aspercent(1-fib2level), Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib3[n1],  if !lastswing then aspercent(fib3level) else aspercent(1-fib3level), Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib4[n1],  if !lastswing then aspercent(fib4level) else aspercent(1-fib4level), Color.cyan, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fibm[n1],  if !lastswing then aspercent(fibmlevel) else aspercent(1-fibmlevel), Color.white, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib5[n1], if lastswing then aspercent(1-fib5extlevel) else aspercent(fib5extlevel) , Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib6[n1], if lastswing then  aspercent(1-fib6extlevel) else aspercent(fib6extlevel), Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib7[n1], if lastswing then aspercent(1-fib7extlevel) else aspercent(fib7extlevel), Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib8[n1], if lastswing then aspercent(1-fib8extlevel) else aspercent(fib8extlevel), Color.yellow, yes);

AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib5a[n1], if lastswing then aspercent(fib5extlevel) else aspercent(1-fib5extlevel) , Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib6a[n1], if lastswing then aspercent(fib6extlevel) else aspercent(1-fib6extlevel), Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib7a[n1], if lastswing then aspercent(fib7extlevel) else aspercent(1-fib7extlevel), Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib8a[n1], if lastswing then aspercent(fib8extlevel) else aspercent(1-fib8extlevel), Color.yellow, yes);``````
hey @SleepyZ this is an amazing code , however I have been trying to add additional retracements, for some reason depending on the trend the retracements become inverse instead of showing .88 retracement it will show 12% retracement, would you be able to take a look at the code and tell me where im going wrong?
Ruby:
``````input showlastswing = yes;
input swing_back1 = 5;
input swing_forward1 = 5;
input maxbars1 = 30;

def na = Double.NaN;
def bn = barnumber();
def sb1 = swing_back1;
def sf1 = swing_forward1;
def lfor1 = Lowest(low, sf1)[-sf1];
def lback1 = Lowest(low, sb1)[1];
def swinglow1 = if low < lfor1 and low < lback1 then 1 else 0;
def swinglowbar = if low < lfor1 and low < lback1 then bn else na;
def hfor1  = Highest(high, sf1)[-sf1];
def hback1 = Highest(high, sb1)[1];
def swinghigh1   = if high > hfor1 and high > hback1 then 1 else 0;
def swinghighbar = if high > hfor1 and high > hback1 then bn else na;
def lastswing    = highestall(swinghighbar)>highestall(swinglowbar);

#Swings identifed as points
plot r2 = if showlastswing ==yes and bn==highestall(swinghighbar) then high else if showlastswing == no and swinghigh1 then high else na;
plot s2 = if showlastswing == yes and bn==highestall(swinglowbar) then low else if showlastswing == no and swinglow1 then low else na;

r2.SetStyle(Curve.POINTS);
r2.SetLineWeight(4);
r2.SetDefaultColor(Color.GREEN);
r2.HideBubble();
s2.SetStyle(Curve.POINTS);
s2.SetLineWeight(4);
s2.SetDefaultColor(Color.RED);
s2.HideBubble();

input bubbleoffsetfactor  = 3;
input showbubbles_r2s2    = yes;
AddChartBubble(showbubbles_r2s2 and r2, high + TickSize() * bubbleoffsetfactor, "R2", Color.GREEN, yes);
AddChartBubble(showbubbles_r2s2 and s2, low - TickSize() * bubbleoffsetfactor, "S2", Color.RED, no);

#Store Previous Data
def r2save = if !IsNaN(r2) then r2 else r2save[1];
def s2save = if !IsNaN(s2) then s2 else s2save[1];

#Fibonacci

input numberfibstoshow = 1;

#Retracement Fibonacci Levels
input fib1level           = .236;
input fib2level           = .382;
input fibMlevel           = .500;
input fib3level           = .618;
input fib4level           = .764;
input fib4blevel           = .88;
input fib0level           = -.28;

#Extended Fibonacci Levels - These will create complementary extensions below zero as well as those inputs below which are over 1
input showfibextensions   = yes;
input fib5extlevel        = 1.272;
input fib6extlevel        = 1.618;
input fib7extlevel        = 2.618;
input fib8extlevel        = 4.236;

#Fibonacci Lines
def fibh  = r2save;
def fibl  = s2save;
def range = if isnan(close) then range[1] else fibh - fibl;
def data  = CompoundValue(1, if (r2save == high) and range<0 or (s2save == low) and range>0 then data[1] + 1 else data[1], 0);
def datacount = if isnan(close) then datacount[1] else (HighestAll(data) - data[1]) + 1;

input showfiblines = yes;

plot fibHp = r2save;
plot fibLp = s2save;
def fibmext=if !isnan(fibl + range * fibMlevel) then fibmext[1] else fibl + range * fibMlevel;
plot fib0  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib0level else na;
plot fibM  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fibMlevel else na;
plot fib1  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib1level else na;
plot fib2  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib2level else na;
plot fib3  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib3level else na;
plot fib4  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib4level else na;
plot fib4b  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib4blevel else na;

plot fib5  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib5extlevel else na;
plot fib6  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib6extlevel else na;
plot fib7  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib7extlevel else na;
plot fib8  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib8extlevel else na;

plot fib5a  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibh + range * -fib5extlevel else na;
plot fib6a  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibh + range * -fib6extlevel else na;
plot fib7a  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibh + range * -fib7extlevel else na;
plot fib8a  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibh + range * -fib8extlevel else na;

fibHp.SetPaintingStrategy(PaintingStrategy.DASHES);
fibLp.SetPaintingStrategy(PaintingStrategy.DASHES);
fibHp.SetLineWeight(2);
fibLp.SetLineWeight(2);
fibM.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib0.setpaintingStrategy(paintingStrategy.HORIZONTAL);
fib1.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib2.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib3.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib4.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib4b.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib5.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib6.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib7.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib8.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib5a.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib6a.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib7a.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib8a.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fibHp.SetDefaultColor(Color.GREEN);
fibLp.SetDefaultColor(Color.RED);
fibM.SetDefaultColor(Color.WHITE);
fib0.setDefaultColor(color.CYAN);
fib1.SetDefaultColor(Color.CYAN);
fib2.SetDefaultColor(Color.YELLOW);
fib3.SetDefaultColor(Color.YELLOW);
fib4.SetDefaultColor(Color.CYAN);
fib5.setdefaultColor(color.yellow);
fib6.setdefaultColor(color.yellow);
fib7.setdefaultColor(color.yellow);
fib8.setdefaultColor(color.yellow);
fib5a.setdefaultColor(color.yellow);
fib6a.setdefaultColor(color.yellow);
fib7a.setdefaultColor(color.yellow);
fib8a.setdefaultColor(color.yellow);

#To Hide Price Bubbles on Right Axis, remove the "#" sign on the following HideBubble() code
#fibM.HideBubble();
#fib1.HideBubble();
#fib2.HideBubble();
#fib3.HideBubble();
#fib4.HideBubble();
#fib5.HideBubble();
#fib6.HideBubble();
#fib7.HideBubble();
#fib8.HideBubble();
#fib5a.HideBubble();
#fib6a.HideBubble();
#fib7a.HideBubble();
#fib8a.HideBubble();

input showfib_bubbles = yes;
input bubble_mover    = 5; #Moves bubbles left/right then number of bars input here
def   n               = bubble_mover;
def   n1              = n +1;
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fibh[n1],  aspercent(if !lastswing then 1 else 0), Color.green, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fibl[n1],  aspercent(if !lastswing then 0 else 1), Color.red, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib1[n1],  if !lastswing then aspercent(fib1level) else aspercent(1-fib1level), Color.cyan, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib2[n1],  if !lastswing then aspercent(fib2level) else aspercent(1-fib2level), Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib3[n1],  if !lastswing then aspercent(fib3level) else aspercent(1-fib3level), Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib4[n1],  if !lastswing then aspercent(fib4level) else aspercent(1-fib4level), Color.cyan, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib4b[n1],  if !lastswing then aspercent(fib4blevel) else aspercent(1-fib4blevel), Color.cyan, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fibm[n1],  if !lastswing then aspercent(fibmlevel) else aspercent(1-fibmlevel), Color.white, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib0[n1],  if !lastswing then aspercent(fib0level) else aspercent(1-fib0level), Color.cyan, yes);
AddChartBubble(showfib_bubbles and showfibextensions and !IsNaN(close[n1]) and IsNaN(close[n]), fib5[n1], if lastswing then aspercent(1-fib5extlevel) else aspercent(fib5extlevel) , Color.yellow, yes);
AddChartBubble(showfib_bubbles and  showfibextensions  and !IsNaN(close[n1]) and IsNaN(close[n]), fib6[n1], if lastswing then  aspercent(1-fib6extlevel) else aspercent(fib6extlevel), Color.yellow, yes);
AddChartBubble(showfib_bubbles  and showfibextensions and !IsNaN(close[n1]) and IsNaN(close[n]), fib7[n1], if lastswing then aspercent(1-fib7extlevel) else aspercent(fib7extlevel), Color.yellow, yes);
AddChartBubble(showfib_bubbles  and showfibextensions and !IsNaN(close[n1]) and IsNaN(close[n]), fib8[n1], if lastswing then aspercent(1-fib8extlevel) else aspercent(fib8extlevel), Color.yellow, yes);

AddChartBubble(showfib_bubbles and showfibextensions and !IsNaN(close[n1]) and IsNaN(close[n]), fib5a[n1], if lastswing then aspercent(fib5extlevel) else aspercent(1-fib5extlevel) , Color.yellow, yes);
AddChartBubble(showfib_bubbles  and showfibextensions and !IsNaN(close[n1]) and IsNaN(close[n]), fib6a[n1], if lastswing then aspercent(fib6extlevel) else aspercent(1-fib6extlevel), Color.yellow, yes);
AddChartBubble(showfib_bubbles  and showfibextensions and !IsNaN(close[n1]) and IsNaN(close[n]), fib7a[n1], if lastswing then aspercent(fib7extlevel) else aspercent(1-fib7extlevel), Color.yellow, yes);
AddChartBubble(showfib_bubbles  and showfibextensions and !IsNaN(close[n1]) and IsNaN(close[n]), fib8a[n1], if lastswing then aspercent(fib8extlevel) else aspercent(1-fib8extlevel), Color.yellow, yes);``````

Last edited:
What is r2save? You need to define it first or input a value before you use "def fibh = r2save;"

Last edited:
Hi Sleepy. I have imported and looked at some of your code before and it looks great. This one does not allow me no matter which way I import the code it comes up as a flat line with no values (Squashed) instead of Auto fib lines. Could there me something missing in the code I didn't grab or I am not doing? Thanks for sharing your code! Giovanna

The code does that already. Set the bubbleoffsetfactor from 3 to 0 and you should see the 100%/0% lines are from r2 and s2.

The code does that already. Set the bubbleoffsetfactor from 3 to 0 and you should see the 100%/0% lines are from r2 and s2.
Sorry, it did not draw a line connecting R2 and S2 when I change bubbleoffsetfactor from 3 to 0, similar to fibfan line, connecting s2 and rs.

Last edited:
Sorry, it did not draw a line connecting R2 and S2 when I change bubbleoffsetfactor from 3 to 0, similar to fibfan line, connecting s2 and rs.

If you just want a line between the 2 points then see the bold code below

Rich (BB code):
``````input showlastswing = yes;
input swing_back1 = 5;
input swing_forward1 = 5;
input maxbars1 = 30;

def na = Double.NaN;
def bn = barnumber();
def sb1 = swing_back1;
def sf1 = swing_forward1;
def lfor1 = Lowest(low, sf1)[-sf1];
def lback1 = Lowest(low, sb1)[1];
def swinglow1 = if low < lfor1 and low < lback1 then 1 else 0;
def swinglowbar = if low < lfor1 and low < lback1 then bn else na;
def hfor1  = Highest(high, sf1)[-sf1];
def hback1 = Highest(high, sb1)[1];
def swinghigh1   = if high > hfor1 and high > hback1 then 1 else 0;
def swinghighbar = if high > hfor1 and high > hback1 then bn else na;
def lastswing    = highestall(swinghighbar)>highestall(swinglowbar);

#Swings identifed as points
plot r2 = if showlastswing ==yes and bn==highestall(swinghighbar) then high else if showlastswing == no and swinghigh1 then high else na;
plot s2 = if showlastswing == yes and bn==highestall(swinglowbar) then low else if showlastswing == no and swinglow1 then low else na;

r2.SetStyle(Curve.POINTS);
r2.SetLineWeight(4);
r2.SetDefaultColor(Color.GREEN);
r2.HideBubble();
s2.SetStyle(Curve.POINTS);
s2.SetLineWeight(4);
s2.SetDefaultColor(Color.RED);
s2.HideBubble();

plot r2s2 = if !isnan(r2) then r2 else s2;
r2s2.enableApproximation();
r2s2.setlineWeight(5);
r2s2.setdefaultColor(color.white);

input bubbleoffsetfactor  = 3;
input showbubbles_r2s2    = yes;
AddChartBubble(showbubbles_r2s2 and r2, high + TickSize() * bubbleoffsetfactor, "R2", Color.GREEN, yes);
AddChartBubble(showbubbles_r2s2 and s2, low - TickSize() * bubbleoffsetfactor, "S2", Color.RED, no);

#Store Previous Data
def r2save = if !IsNaN(r2) then r2 else r2save[1];
def s2save = if !IsNaN(s2) then s2 else s2save[1];

#Fibonacci

input numberfibstoshow = 1;

#Retracement Fibonacci Levels
input fib1level           = .236;
input fib2level           = .382;
input fibMlevel           = .500;
input fib3level           = .618;
input fib4level           = .764;
input fib4blevel           = .88;
input fib0level           = -.28;

#Extended Fibonacci Levels - These will create complementary extensions below zero as well as those inputs below which are over 1
input showfibextensions   = yes;
input fib5extlevel        = 1.272;
input fib6extlevel        = 1.618;
input fib7extlevel        = 2.618;
input fib8extlevel        = 4.236;

#Fibonacci Lines
def fibh  = r2save;
def fibl  = s2save;
def range = if isnan(close) then range[1] else fibh - fibl;
def data  = CompoundValue(1, if (r2save == high) and range<0 or (s2save == low) and range>0 then data[1] + 1 else data[1], 0);
def datacount = if isnan(close) then datacount[1] else (HighestAll(data) - data[1]) + 1;

input showfiblines = yes;

plot fibHp = r2save;
plot fibLp = s2save;
def fibmext=if !isnan(fibl + range * fibMlevel) then fibmext[1] else fibl + range * fibMlevel;
plot fib0  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib0level else na;
plot fibM  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fibMlevel else na;
plot fib1  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib1level else na;
plot fib2  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib2level else na;
plot fib3  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib3level else na;
plot fib4  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib4level else na;
plot fib4b  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib4blevel else na;

plot fib5  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib5extlevel else na;
plot fib6  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib6extlevel else na;
plot fib7  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib7extlevel else na;
plot fib8  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib8extlevel else na;

plot fib5a  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibh + range * -fib5extlevel else na;
plot fib6a  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibh + range * -fib6extlevel else na;
plot fib7a  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibh + range * -fib7extlevel else na;
plot fib8a  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibh + range * -fib8extlevel else na;

fibHp.SetPaintingStrategy(PaintingStrategy.DASHES);
fibLp.SetPaintingStrategy(PaintingStrategy.DASHES);
fibHp.SetLineWeight(2);
fibLp.SetLineWeight(2);
fibM.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib0.setpaintingStrategy(paintingStrategy.HORIZONTAL);
fib1.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib2.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib3.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib4.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib4b.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib5.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib6.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib7.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib8.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib5a.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib6a.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib7a.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib8a.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fibHp.SetDefaultColor(Color.GREEN);
fibLp.SetDefaultColor(Color.RED);
fibM.SetDefaultColor(Color.WHITE);
fib0.setDefaultColor(color.CYAN);
fib1.SetDefaultColor(Color.CYAN);
fib2.SetDefaultColor(Color.YELLOW);
fib3.SetDefaultColor(Color.YELLOW);
fib4.SetDefaultColor(Color.CYAN);
fib5.setdefaultColor(color.yellow);
fib6.setdefaultColor(color.yellow);
fib7.setdefaultColor(color.yellow);
fib8.setdefaultColor(color.yellow);
fib5a.setdefaultColor(color.yellow);
fib6a.setdefaultColor(color.yellow);
fib7a.setdefaultColor(color.yellow);
fib8a.setdefaultColor(color.yellow);

#To Hide Price Bubbles on Right Axis, remove the "#" sign on the following HideBubble() code
#fibM.HideBubble();
#fib1.HideBubble();
#fib2.HideBubble();
#fib3.HideBubble();
#fib4.HideBubble();
#fib5.HideBubble();
#fib6.HideBubble();
#fib7.HideBubble();
#fib8.HideBubble();
#fib5a.HideBubble();
#fib6a.HideBubble();
#fib7a.HideBubble();
#fib8a.HideBubble();

input showfib_bubbles = yes;
input bubble_mover    = 5; #Moves bubbles left/right then number of bars input here
def   n               = bubble_mover;
def   n1              = n +1;
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fibh[n1],  aspercent(if !lastswing then 1 else 0), Color.green, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fibl[n1],  aspercent(if !lastswing then 0 else 1), Color.red, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib1[n1],  if !lastswing then aspercent(fib1level) else aspercent(1-fib1level), Color.cyan, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib2[n1],  if !lastswing then aspercent(fib2level) else aspercent(1-fib2level), Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib3[n1],  if !lastswing then aspercent(fib3level) else aspercent(1-fib3level), Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib4[n1],  if !lastswing then aspercent(fib4level) else aspercent(1-fib4level), Color.cyan, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib4b[n1],  if !lastswing then aspercent(fib4blevel) else aspercent(1-fib4blevel), Color.cyan, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fibm[n1],  if !lastswing then aspercent(fibmlevel) else aspercent(1-fibmlevel), Color.white, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib0[n1],  if !lastswing then aspercent(fib0level) else aspercent(1-fib0level), Color.cyan, yes);
AddChartBubble(showfib_bubbles and showfibextensions and !IsNaN(close[n1]) and IsNaN(close[n]), fib5[n1], if lastswing then aspercent(1-fib5extlevel) else aspercent(fib5extlevel) , Color.yellow, yes);
AddChartBubble(showfib_bubbles and  showfibextensions  and !IsNaN(close[n1]) and IsNaN(close[n]), fib6[n1], if lastswing then  aspercent(1-fib6extlevel) else aspercent(fib6extlevel), Color.yellow, yes);
AddChartBubble(showfib_bubbles  and showfibextensions and !IsNaN(close[n1]) and IsNaN(close[n]), fib7[n1], if lastswing then aspercent(1-fib7extlevel) else aspercent(fib7extlevel), Color.yellow, yes);
AddChartBubble(showfib_bubbles  and showfibextensions and !IsNaN(close[n1]) and IsNaN(close[n]), fib8[n1], if lastswing then aspercent(1-fib8extlevel) else aspercent(fib8extlevel), Color.yellow, yes);

AddChartBubble(showfib_bubbles and showfibextensions and !IsNaN(close[n1]) and IsNaN(close[n]), fib5a[n1], if lastswing then aspercent(fib5extlevel) else aspercent(1-fib5extlevel) , Color.yellow, yes);
AddChartBubble(showfib_bubbles  and showfibextensions and !IsNaN(close[n1]) and IsNaN(close[n]), fib6a[n1], if lastswing then aspercent(fib6extlevel) else aspercent(1-fib6extlevel), Color.yellow, yes);
AddChartBubble(showfib_bubbles  and showfibextensions and !IsNaN(close[n1]) and IsNaN(close[n]), fib7a[n1], if lastswing then aspercent(fib7extlevel) else aspercent(1-fib7extlevel), Color.yellow, yes);
AddChartBubble(showfib_bubbles  and showfibextensions and !IsNaN(close[n1]) and IsNaN(close[n]), fib8a[n1], if lastswing then aspercent(fib8extlevel) else aspercent(1-fib8extlevel), Color.yellow, yes);``````

If you just want a line between the 2 points then see the bold code below
hello Sleepy good morning,i really like this set up where it draws the line from S2-R2,,,, I want to only plot the line connecting s2-r3 high low, and the 50% line and chart bubble and
If you just want a line between the 2 points then see the bold code below
hello, i tried using this today made a few small changes to my liking,,, i have it only showung the swing s2/r2 and the 50% retracement line,,, however i was not able to also keep (fib3level) 0.618, i tried modifying the script as well as just hididng it on settings,,, when i finally thought i had gotten it to show i notived on some charts it changes itself to (fib2level) o.382,, anyway to get it to show only the

(swing s2/r2 and 50% line and 0.618?

your time and assistance would be greatly appreciated,

Hey @SleepyZ Could this same code be created but to reflect pre-market high to low and pre-market low to high?

Hey @SleepyZ Could this same code be created but to reflect pre-market high to low and pre-market low to high?
I wrote something awhile ago that might be useful: Globex with Fibs - you may need to adjust the fibs to get the exact values you want but will plot a few based on that overnight range.

Here is code for Swing High/Low with options to show all swings or last swing, fib levels, number of swings to display fib1 levels, and chart bubbles identifying swings and fib1 levels. The fib bubbles can moved left/right in the expansion by the number of bars at the input: bubble_mover
Code:
``````#SwingHL_Fibs
#v1    - 01.19.2020 - BLT - Swing High/Low with options to show all swings or last swing, fib levels, number of swings to display fib levels, and chart bubbles identifying swings and fib levels. The fib bubbles can be moved left/right in the expansion by the number of bars at the input: bubble_mover
#v1.2  - 01.19.2020 - BLT - Made fib bubbles automatically reflect fib level inputs, which were hard coded in v1
#v1.3  = 01.20.2020 - BLT - Added more fib lines, adjusted fib levels based upon whether r2 is 100%, and extended fib lines into all of expansion

input showlastswing = yes;
input swing_back1 = 5;
input swing_forward1 = 5;
input maxbars1 = 30;

def na = Double.NaN;
def bn = barnumber();
def sb1 = swing_back1;
def sf1 = swing_forward1;
def lfor1 = Lowest(low, sf1)[-sf1];
def lback1 = Lowest(low, sb1)[1];
def swinglow1 = if low < lfor1 and low < lback1 then 1 else 0;
def swinglowbar = if low < lfor1 and low < lback1 then bn else na;
def hfor1  = Highest(high, sf1)[-sf1];
def hback1 = Highest(high, sb1)[1];
def swinghigh1   = if high > hfor1 and high > hback1 then 1 else 0;
def swinghighbar = if high > hfor1 and high > hback1 then bn else na;
def lastswing    = highestall(swinghighbar)>highestall(swinglowbar);

#Swings identifed as points
plot r2 = if showlastswing ==yes and bn==highestall(swinghighbar) then high else if showlastswing == no and swinghigh1 then high else na;
plot s2 = if showlastswing == yes and bn==highestall(swinglowbar) then low else if showlastswing == no and swinglow1 then low else na;

r2.SetStyle(Curve.POINTS);
r2.SetLineWeight(4);
r2.SetDefaultColor(Color.GREEN);
r2.HideBubble();
s2.SetStyle(Curve.POINTS);
s2.SetLineWeight(4);
s2.SetDefaultColor(Color.RED);
s2.HideBubble();

input bubbleoffsetfactor  = 3;
input showbubbles_r2s2    = yes;
AddChartBubble(showbubbles_r2s2 and r2, high + TickSize() * bubbleoffsetfactor, "R2", Color.GREEN, yes);
AddChartBubble(showbubbles_r2s2 and s2, low - TickSize() * bubbleoffsetfactor, "S2", Color.RED, no);

#Store Previous Data
def r2save = if !IsNaN(r2) then r2 else r2save[1];
def s2save = if !IsNaN(s2) then s2 else s2save[1];

#Fibonacci

input numberfibstoshow = 1;

#Retracement Fibonacci Levels
input fib1level           = .236;
input fib2level           = .382;
input fibMlevel           = .500;
input fib3level           = .618;
input fib4level           = .764;

#Extended Fibonacci Levels - These will create complementary extensions below zero as well as those inputs below which are over 1
input showfibextensions   = yes;
input fib5extlevel        = 1.272;
input fib6extlevel        = 1.618;
input fib7extlevel        = 2.618;
input fib8extlevel        = 4.236;

#Fibonacci Lines
def fibh  = r2save;
def fibl  = s2save;
def range = if isnan(close) then range[1] else fibh - fibl;
def data  = CompoundValue(1, if (r2save == high) and range<0 or (s2save == low) and range>0 then data[1] + 1 else data[1], 0);
def datacount = if isnan(close) then datacount[1] else (HighestAll(data) - data[1]) + 1;

input showfiblines = yes;

plot fibHp = r2save;
plot fibLp = s2save;
def fibmext=if !isnan(fibl + range * fibMlevel) then fibmext[1] else fibl + range * fibMlevel;
plot fibM  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fibMlevel else na;
plot fib1  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib1level else na;
plot fib2  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib2level else na;
plot fib3  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib3level else na;
plot fib4  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib4level else na;

plot fib5  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib5extlevel else na;
plot fib6  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib6extlevel else na;
plot fib7  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib7extlevel else na;
plot fib8  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibl + range * fib8extlevel else na;

plot fib5a  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibh + range * -fib5extlevel else na;
plot fib6a  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibh + range * -fib6extlevel else na;
plot fib7a  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibh + range * -fib7extlevel else na;
plot fib8a  = if showfiblines == no then na else if datacount <= numberfibstoshow then fibh + range * -fib8extlevel else na;

fibHp.SetPaintingStrategy(PaintingStrategy.DASHES);
fibLp.SetPaintingStrategy(PaintingStrategy.DASHES);
fibHp.SetLineWeight(2);
fibLp.SetLineWeight(2);
fibM.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib1.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib2.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib3.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib4.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib5.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib6.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib7.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib8.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib5a.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib6a.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib7a.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fib8a.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
fibHp.SetDefaultColor(Color.GREEN);
fibLp.SetDefaultColor(Color.RED);
fibM.SetDefaultColor(Color.WHITE);
fib1.SetDefaultColor(Color.CYAN);
fib2.SetDefaultColor(Color.YELLOW);
fib3.SetDefaultColor(Color.YELLOW);
fib4.SetDefaultColor(Color.CYAN);
fib5.setdefaultColor(color.yellow);
fib6.setdefaultColor(color.yellow);
fib7.setdefaultColor(color.yellow);
fib8.setdefaultColor(color.yellow);
fib5a.setdefaultColor(color.yellow);
fib6a.setdefaultColor(color.yellow);
fib7a.setdefaultColor(color.yellow);
fib8a.setdefaultColor(color.yellow);

#To Hide Price Bubbles on Right Axis, remove the "#" sign on the following HideBubble() code
#fibM.HideBubble();
#fib1.HideBubble();
#fib2.HideBubble();
#fib3.HideBubble();
#fib4.HideBubble();
#fib5.HideBubble();
#fib6.HideBubble();
#fib7.HideBubble();
#fib8.HideBubble();
#fib5a.HideBubble();
#fib6a.HideBubble();
#fib7a.HideBubble();
#fib8a.HideBubble();

input showfib_bubbles = yes;
input bubble_mover    = 5; #Moves bubbles left/right then number of bars input here
def   n               = bubble_mover;
def   n1              = n +1;
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fibh[n1],  aspercent(if !lastswing then 1 else 0), Color.green, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fibl[n1],  aspercent(if !lastswing then 0 else 1), Color.red, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib1[n1],  if !lastswing then aspercent(fib1level) else aspercent(1-fib1level), Color.cyan, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib2[n1],  if !lastswing then aspercent(fib2level) else aspercent(1-fib2level), Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib3[n1],  if !lastswing then aspercent(fib3level) else aspercent(1-fib3level), Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib4[n1],  if !lastswing then aspercent(fib4level) else aspercent(1-fib4level), Color.cyan, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fibm[n1],  if !lastswing then aspercent(fibmlevel) else aspercent(1-fibmlevel), Color.white, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib5[n1], if lastswing then aspercent(1-fib5extlevel) else aspercent(fib5extlevel) , Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib6[n1], if lastswing then  aspercent(1-fib6extlevel) else aspercent(fib6extlevel), Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib7[n1], if lastswing then aspercent(1-fib7extlevel) else aspercent(fib7extlevel), Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib8[n1], if lastswing then aspercent(1-fib8extlevel) else aspercent(fib8extlevel), Color.yellow, yes);

AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib5a[n1], if lastswing then aspercent(fib5extlevel) else aspercent(1-fib5extlevel) , Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib6a[n1], if lastswing then aspercent(fib6extlevel) else aspercent(1-fib6extlevel), Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib7a[n1], if lastswing then aspercent(fib7extlevel) else aspercent(1-fib7extlevel), Color.yellow, yes);
AddChartBubble(showfib_bubbles and !IsNaN(close[n1]) and IsNaN(close[n]), fib8a[n1], if lastswing then aspercent(fib8extlevel) else aspercent(1-fib8extlevel), Color.yellow, yes);``````

@SleepyZ I realize this might be a big request but can you add these fib levels to your script? I attempted many times myself but I cannot get it to work. I would greatly appreciate it. Thank you!!

87k+ Posts
381 Online

## The Market Trading Game Changer

Join 2,500+ subscribers inside the useThinkScript VIP Membership Club
• Exclusive indicators
• Proven strategies & setups
• Private Discord community
• Exclusive members-only content
• 1 full year of unlimited support

What is useThinkScript?

useThinkScript is the #1 community of stock market investors using indicators and other tools to power their trading strategies. Traders of all skill levels use our forums to learn about scripting and indicators, help each other, and discover new ways to gain an edge in the markets.

How do I get started?

We get it. Our forum can be intimidating, if not overwhelming. With thousands of topics, tens of thousands of posts, our community has created an incredibly deep knowledge base for stock traders. No one can ever exhaust every resource provided on our site.

If you are new, or just looking for guidance, here are some helpful links to get you started.

What are the benefits of VIP Membership?