HOT ZONE - RSI with IV Percentile: Buy Stock or Sell Put Options Signal For ThinkOrSwim

[priyamani]

Add the HotzoneRSI as well. Draw a trendline and a break would be confirmation.

Added hotzonrRSI & got the trendlines

 

[netarchitech]

Monitor the WEEKLY chart and set alerts in the scan for the weekly timeframe.

@chewie76 : I know we're almost 4 years removed from when you first posted this, but I am very interested in the interaction between the RSI and the IV Percentile...Could you explain how to get the IV Percentile to plot on a weekly chart? Nothing I've tried has worked...

I look forward to your reply when and if you have a chance to so do...Thanks for your time and effort putting this whole thing together...It is much appreciated...

 

[chewie76]

@chewie76 : I know we're almost 4 years removed from when you first posted this, but I am very interested in the interaction between the RSI and the IV Percentile...Could you explain how to get the IV Percentile to plot on a weekly chart? Nothing I've tried has worked...

I look forward to your reply when and if you have a chance to so do...Thanks for your time and effort putting this whole thing together...It is much appreciated...

It works for me. Try looking at QQQ. I see it on the weekly.

 

[netarchitech]

@chewie76 : Thanks for the swift reply...I appreciate it...

Yeah, I see what you're saying about QQQ...Must be something with the Futures...I'm focused on NQ...I guess I'll use QQQ as a proxy...

Weird thing is I can't get the IV Percentile for GC for the Weekly and the Daily, just the lower timeframes...Looks like I'll have to use GLD as well...

In any event, at least I can proxy via the ETFs...Thanks for the tip...

Good Luck and Good Trading

 

[hballa]

It's gonna get heated up with the Hot Zone indicator! Hope you like it. It is a combination of RSI with IV percentile. The red colored area where IV is greater than RSI is the Hot Zone. Inside the Hot Zone are some colored circles on the midline. A yellow circle is a caution warning. This means it could be a good buy, but be cautious because it is a weak signal. The red circle is the HOT warning. This means it's time to buy or sell put options.

NOTE: there may be a string of red circles, so the first one that appears may not be the best entry because more could follow. You'll want to see the RSI and IV come back together for extra confirmation. Another confirmation is the ZSCORE upper indicator on this forum. Below are a few examples.

This indicator works great with the BTD indicator. Enjoy heating up your account with the Hot Zone!

This is an example of CWH on a daily chart.

View attachment 8096

This is an example of SPY on 12/24/2019. It showed the EXACT low! Then it ripped higher for the next 4 months.

View attachment 8097

This is an example of TSLA. 3 days this year were HOT buys in the middle of March 2020.

View attachment 8098

There is another version of this indicator that @FateOwnzYou helped make. SHOUT OUT to you fellow scripter! You're awesome! This version is cleaner to the eye and basically subtracts the RSI from IV and makes one single line so the greater the distance between them the further down the Hot Zone goes. I added the yellow and red circles, but you may want to adjust these settings for your trading style. The only negative is you don't actually see the actual RSI indicator, and some people who already use RSI would probably prefer using the other version to keep the RSI. The clear advantage is it gives clear buy and sell areas. Under the green line is a buy area. Over the red line is a sell area shaded in green (collect your cash money!) . (Any area in red could be considered a buy area, but the closer to the green line, the better.)

Lets look at a DAY TRADE in /RTY. Look at both of these Hot Zone indicators. Notice the one on the bottom. Circled areas for buys and sells.

View attachment 8099

Here is an example of QQQ on a daily chart. Notice the HOT circles and buy area on lower indicator and the sell areas.

View attachment 8100

Added ARROWS to the indicator. See below.

View attachment 8101

Below is an example of day trading /RTY using a 2 min chart. Look at the sell signal arrow and the two red hot buy dots that are highlighted, both followed by green buy arrows.
View attachment 8102

Hot Zone-RSI

#HOTZONE-RSI: RSI-IV_percentile indicator
#developed by Chewie76 9-30-2020
### Global Variables ###
declare lower;
input length = 14;
input over_Bought2 = 80;
input over_Bought = 70;
input over_Sold = 30;
input over_Sold2 = 20;
input price = close;
input averageType = AverageType.WILDERS;
input showBreakoutSignals = yes;
input alertsOn = yes;
input ChartBubblesOn = yes;

### RSI ###
def NetChgAvg = MovingAverage(averageType, price - price[1], length);
def TotChgAvg = MovingAverage(averageType, AbsValue(price - price[1]), length);
def ChgRatio = if TotChgAvg != 0 then NetChgAvg / TotChgAvg else 0;

plot RSI = 50 * (ChgRatio + 1);
plot MiddleLine = 50;
Middleline.SetDefaultColor(Color.YELLOW);
RSI.SetLineWeight(2);

plot OverSold = over_Sold;
plot OverBought = over_Bought;
plot UpSignal = if RSI crosses above OverSold then OverSold else Double.NaN;
plot DownSignal = if RSI crosses below OverBought then OverBought else Double.NaN;

AddCloud(Over_Bought2, OverBought, Color.dark_RED, Color.CURRENT);
AddCloud(OverSold, Over_Sold2, Color.dark_GREEN, Color.CURRENT);

UpSignal.SetHiding(!showBreakoutSignals);
DownSignal.SetHiding(!showBreakoutSignals);

RSI.DefineColor("OverBought", color.red);
RSI.DefineColor("Normal", GetColor(9));
RSI.DefineColor("OverSold", color.green);
RSI.AssignValueColor(if RSI > over_Bought then RSI.Color("OverBought") else if RSI < over_Sold then RSI.Color("OverSold") else RSI.Color("Normal"));
OverSold.SetDefaultColor(color.green);
OverBought.SetDefaultColor(color.red);
UpSignal.SetDefaultColor(Color.UPTICK);
UpSignal.SetPaintingStrategy(PaintingStrategy.ARROW_UP);
DownSignal.SetDefaultColor(Color.DOWNTICK);
DownSignal.SetPaintingStrategy(PaintingStrategy.ARROW_DOWN);

AddCloud(RSI, OverBought, Color.RED, Color.CURRENT);
AddCloud(OverSold, RSI, Color.GREEN, Color.CURRENT);

### IVPercentile ###
def vol = imp_volatility();
input TimePeriod = 252;

def data = if !isNaN(vol) then vol else vol[-1];
def hi = highest(data, TimePeriod);
def lo = lowest(data, TimePeriod);
plot Percentile = (data - lo) / (hi - lo) * 100;
def lowend = Percentile < 25;
def highend = Percentile > 50;

input over_Bought1 = 98;
input over_Sold1 = 2;

Percentile.DefineColor("OverBought", Color.red);
Percentile.DefineColor("Normal", color.magenta);
Percentile.DefineColor("OverSold", Color.GREEN);
Percentile.AssignValueColor(if Percentile > over_Bought1 then Percentile.color("OverBought") else if Percentile < over_Sold1 then Percentile.color("OverSold") else Percentile.color("Normal"));

AddCloud(percentile, rsi, Color.RED, Color.CURRENT);

### Squeeze Relationship (RSI and IV) ###
def RSIIV = if percentile - RSI >= 40 and RSI < 32 then 1 else 0;
plot HOT = if RSIIV then 50 else Double.nan;
HOT.SetPaintingStrategy(PaintingStrategy.POINTS);
HOT.SetLineWeight(4);
HOT.SetDefaultColor(Color.RED);

def RSIIV1 = if (percentile - RSI >= 30 and RSI > 32 and RSI < 40, 1, Double.NaN);
plot CAUTION = if RSIIV1 then 50 else Double.nan;
CAUTION.SetPaintingStrategy(PaintingStrategy.POINTS);
CAUTION.SetLineWeight(4);
CAUTION.SetDefaultColor(Color.YELLOW);

#Label

def bullish = if RSI > MiddleLine then 1 else 0;
def bearish = if RSI < MiddleLine then 1 else 0;

AddLabel(ChartBubblesOn, if bullish then "BULLISH" else if bearish then "BEARISH" else if RSI > 100 then "hi" else "low", if bullish then color.green else if bearish then color.red else color.black);


def condition1 = percentile - RSI >= 40 and RSI < 32;
def condition2 = percentile - RSI >= 30 and RSI > 32 and RSI < 40;

# Alert
Alert(alertsOn and condition1, "HOT", Alert.BAR, Sound.Chimes);
Alert(alertsOn and condition2, "CAUTION", Alert.BAR, Sound.bell);

Shareable link: http://tos.mx/9zhE6eE

Hot Zone line

#HOTZONE LINE: RSI-IV_percentile indicator
#developed by Chewie76 with help from FateOwnzYou 9-30-2020

### Global Variables ###
declare lower;
input length = 14;
input price = close;
input averageType = AverageType.WILDERS;
input showBreakoutSignals = yes;
input alertsOn = yes;

def NetChgAvg = MovingAverage(averageType, price - price[1], length);
def TotChgAvg = MovingAverage(averageType, AbsValue(price - price[1]), length);
def ChgRatio = if TotChgAvg != 0 then NetChgAvg / TotChgAvg else 0;

def RSI = (50 * (ChgRatio + 1))*-1;
plot MiddleLine = 0;
plot TakeProfit = 60;
plot BUY = -60;
TakeProfit.SetLineWeight(1);
TakeProfit.SetDefaultColor(Color.RED);
BUY.SetLineWeight(1);
BUY.SetDefaultColor(Color.GREEN);

def vol = imp_volatility();
input TimePeriod = 252;

def data = if !isNaN(vol) then vol else vol[-1];
def hi = highest(data, TimePeriod);
def lo = lowest(data, TimePeriod);
def Percentile = ((data - lo) / (hi - lo) * 100)*-1;
def lowend = Percentile < 25;
def highend = Percentile > 50;

plot HotZone = percentile - rsi;
HotZone.SetLineWeight(1);
HotZone.SetDefaultColor(Color.MAGENTA);

AddCloud(middleline, HotZone, Color.red, Color.CURRENT);
AddCloud(takeprofit,HotZone, Color.CURRENT, Color.GREEN);


### Caution Relationship (RSI and IV) ###
plot CAUTION = if(HotZone <-45 and HotZone > -60,1,double.nan);
#plot CAUTION = if RSIIV1 then 0 else Double.nan;
CAUTION.SetPaintingStrategy(PaintingStrategy.POINTS);
CAUTION.SetLineWeight(4);
CAUTION.SetDefaultColor(Color.YELLOW);

### HOT Relationship (RSI and IV) ###
def RSIIV2 = if HotZone <= -60 then 1 else 0;
plot HOT = if RSIIV2 then 0 else Double.nan;
HOT.SetPaintingStrategy(PaintingStrategy.POINTS);
HOT.SetLineWeight(4);
HOT.SetDefaultColor(Color.RED);

#Arrows#
plot UpSignal = if HotZone crosses above BUY then BUY else Double.NaN;
plot DownSignal = if HotZone crosses below TakeProfit then TakeProfit else Double.NaN;

UpSignal.SetHiding(!showBreakoutSignals);
DownSignal.SetHiding(!showBreakoutSignals);

UpSignal.SetDefaultColor(Color.GREEN);
DownSignal.SetDefaultColor(Color.RED);
UpSignal.SetDefaultColor(Color.UPTICK);
UpSignal.SetPaintingStrategy(PaintingStrategy.ARROW_UP);
DownSignal.SetDefaultColor(Color.DOWNTICK);
DownSignal.SetPaintingStrategy(PaintingStrategy.ARROW_DOWN);

def condition1 = HotZone <= -60;
def condition2 = HotZone < -45 and HotZone > -60;

# Alert
Alert(alertsOn and condition1, "HOT", Alert.BAR, Sound.Chimes);
Alert(alertsOn and condition2, "CAUTION", Alert.BAR, Sound.bell);

Shareable link: http://tos.mx/ZaOhpnv

There are some traders who don't like to use lower indicators. Good news for YOU!!! I created an UPPER indicator that uses BOTH of these into one!!! You can turn on/off the arrows. You can turn on/off the hot and caution dots for the Hotzone and Hotzone line indicators. NOTE: IF you display dots for BOTH indicators, the Hotzone Line dots will plot over the Hotzone indicator dots. If you want to have the opposite, I believe you would just have to move their order within the code.

Below is an example of using the arrows from the HotZone Line indicator with the dots from the HotZone indicator on /ES 15 min chart.

View attachment 8103

Here is the link to the Hotzone UPPER indicator: http://tos.mx/6Co9B16

Do you want to make some serious long term cash?? Monitor the WEEKLY chart and set alerts in the scan for the weekly timeframe. Take a look at the below example of NDX. Hotzone will tell you when to get back into the market after a significant crash!

View attachment 8104



Looking for a watchlist column? Here you go!

HOTZONE RSI Watchlist: http://tos.mx/wjdMkBz
CODE:
#HOTZONE-RSI: WATCHLIST
#developed by Chewie76 9-30-2020
### Global Variables ###
input length = 14;
input over_Bought2 = 80;
input over_Bought = 70;
input over_Sold = 30;
input over_Sold2 = 20;
input price = close;
input averageType = AverageType.WILDERS;
input showBreakoutSignals = yes;

### RSI ###
def NetChgAvg = MovingAverage(averageType, price - price[1], length);
def TotChgAvg = MovingAverage(averageType, AbsValue(price - price[1]), length);
def ChgRatio = if TotChgAvg != 0 then NetChgAvg / TotChgAvg else 0;

DEF RSI = 50 * (ChgRatio + 1);
def MiddleLine = 50;

def OverSold = over_Sold;
def OverBought = over_Bought;
def UpSignal = if RSI crosses above OverSold then 1 else 0;
def DownSignal = if RSI crosses below OverBought then 2 else 0;

### IVPercentile ###
def vol = imp_volatility();
input TimePeriod = 252;

def data = if !isNaN(vol) then vol else vol[-1];
def hi = highest(data, TimePeriod);
def lo = lowest(data, TimePeriod);
def Percentile = (data - lo) / (hi - lo) * 100;
def lowend = Percentile < 25;
def highend = Percentile > 50;

input over_Bought1 = 98;
input over_Sold1 = 2;

### Squeeze Relationship (RSI and IV) ###
def RSIIV = if percentile - RSI >= 40 and RSI < 32 then 1 else 0;
def HOT = if RSIIV then 50 else Double.nan;

def RSIIV1 = if (percentile - RSI >= 30 and RSI > 32 and RSI < 40, 1, Double.NaN);
def CAUTION = if RSIIV1 then 50 else Double.nan;


AssignBackgroundColor(if DownSignal then color.RED else if Upsignal then color.GREEN else color.black);

AddLabel(yes, if Upsignal then "UP" else if Downsignal then "DOWN" else if RSIIV then “HOT” else if RSIIV1 then "CAUTION" else " ", if UPsignal then color.green else if Downsignal then color.red else if RSIIV then color.RED else if RSIIV1 then color.YELLOW else Color.black);

HOTZONE LINE Watchlist: http://tos.mx/lFkTO2b
CODE:
#HOTZONE LINE: WATCHLIST COLUMN
#developed by Chewie76 with help from FateOwnzYou 9-30-2020

### Global Variables ###

input length = 14;
input price = close;
input averageType = AverageType.WILDERS;

def NetChgAvg = MovingAverage(averageType, price - price[1], length);
def TotChgAvg = MovingAverage(averageType, AbsValue(price - price[1]), length);
def ChgRatio = if TotChgAvg != 0 then NetChgAvg / TotChgAvg else 0;

def RSI = (50 * (ChgRatio + 1)) * -1;
def MiddleLine = 0;
def TakeProfit = 60;
def BUY = -60;
def vol = imp_volatility();
input TimePeriod = 252;

def data = if !IsNaN(vol) then vol else vol[-1];
def hi = Highest(data, TimePeriod);
def lo = Lowest(data, TimePeriod);
def Percentile = ((data - lo) / (hi - lo) * 100) * -1;
def lowend = Percentile < 25;
def highend = Percentile > 50;

plot HotZone = Percentile - RSI;

def H = HotZone < -60;
def C = HotZone < -45 and HotZone > -60;

def UpSignal = if HotZone crosses above BUY then 1 else 0;
def DownSignal = if HotZone crosses below TakeProfit then 2 else 0;

AddLabel(yes, if Upsignal then "UP" else if Downsignal then "DOWN" else if H then “HOT” else if C then "CAUTION" else " ", if Upsignal then color.green else if Downsignal then color.red else if H then color.RED else if C then color.YELLOW else Color.BLACK);

AssignBackgroundColor(if H then color.RED else if C then color.YELLOW else color.black);


Adjust the timeframe on it. It will look like the below. It will have a yellow CAUTION for the yellow dot and a red HOT for red dot. The reason there are two columns is because they are set to different timeframes.

View attachment 8105

Looking for a Scan? The below links alert for yellow and red dots along with arrows.

Here is a BUY scan. http://tos.mx/Qh32soR
Here is a SELL scan. http://tos.mx/87AySW1

Let me know what you think!!!!!

@FateOwnzYou, @chewie76, thanks so much for hotzone indicators.

Can you please share scanner that we can use on daily and hourly?

Also I used below scanners and it's not showing hotzone column (attached screenshot)


Here is a BUY scan. http://tos.mx/Qh32soR
Here is a SELL scan. http://tos.mx/87AySW1

I tried to use HZ1 and HZ15 and no records showing. Please see the attached screenshot.

 

[UndefinedUo]

Can anyone more knowledgeable than me, help with adding a histogram for RSI from the middle line? I have been able to add one it however it comes up from 0 instead of the mid line.

 

[useThinkScript]

Can anyone more knowledgeable than me, help with adding a histogram for RSI from the middle line? I have been able to add one it however it comes up from 0 instead of the mid line.
View attachment 22672

As a mathematical precept, the baseline for histograms is at zero.
The ToS app does not provide the ability to change that.

Given that RSI and your other plots use 50 as the midline, a workaround would be to subtract 50 from your definitions. Which will allow you to successfully use the histogram paint strategy.

 

[rajanpanchal]

Make sure arrows are enabled in the settings.

How to enable arrows? Sorry new to tos

 

[chewie76]

How to enable arrows? Sorry new to tos

The arrows should automatically plot.

 

[Thinker]

It's gonna get heated up with the Hot Zone indicator! Hope you like it. It is a combination of RSI with IV percentile. The red colored area where IV is greater than RSI is the Hot Zone. Inside the Hot Zone are some colored circles on the midline. A yellow circle is a caution warning. This means it could be a good buy, but be cautious because it is a weak signal. The red circle is the HOT warning. This means it's time to buy or sell put options.

NOTE: there may be a string of red circles, so the first one that appears may not be the best entry because more could follow. You'll want to see the RSI and IV come back together for extra confirmation. Another confirmation is the ZSCORE upper indicator on this forum. Below are a few examples.

This indicator works great with the BTD indicator. Enjoy heating up your account with the Hot Zone!

This is an example of CWH on a daily chart.

View attachment 8096

This is an example of SPY on 12/24/2019. It showed the EXACT low! Then it ripped higher for the next 4 months.

View attachment 8097

This is an example of TSLA. 3 days this year were HOT buys in the middle of March 2020.

View attachment 8098

There is another version of this indicator that @FateOwnzYou helped make. SHOUT OUT to you fellow scripter! You're awesome! This version is cleaner to the eye and basically subtracts the RSI from IV and makes one single line so the greater the distance between them the further down the Hot Zone goes. I added the yellow and red circles, but you may want to adjust these settings for your trading style. The only negative is you don't actually see the actual RSI indicator, and some people who already use RSI would probably prefer using the other version to keep the RSI. The clear advantage is it gives clear buy and sell areas. Under the green line is a buy area. Over the red line is a sell area shaded in green (collect your cash money!) . (Any area in red could be considered a buy area, but the closer to the green line, the better.)

Lets look at a DAY TRADE in /RTY. Look at both of these Hot Zone indicators. Notice the one on the bottom. Circled areas for buys and sells.

View attachment 8099

Here is an example of QQQ on a daily chart. Notice the HOT circles and buy area on lower indicator and the sell areas.

View attachment 8100

Added ARROWS to the indicator. See below.

View attachment 8101

Below is an example of day trading /RTY using a 2 min chart. Look at the sell signal arrow and the two red hot buy dots that are highlighted, both followed by green buy arrows.
View attachment 8102

Hot Zone-RSI

#HOTZONE-RSI: RSI-IV_percentile indicator
#developed by Chewie76 9-30-2020
### Global Variables ###
declare lower;
input length = 14;
input over_Bought2 = 80;
input over_Bought = 70;
input over_Sold = 30;
input over_Sold2 = 20;
input price = close;
input averageType = AverageType.WILDERS;
input showBreakoutSignals = yes;
input alertsOn = yes;
input ChartBubblesOn = yes;

### RSI ###
def NetChgAvg = MovingAverage(averageType, price - price[1], length);
def TotChgAvg = MovingAverage(averageType, AbsValue(price - price[1]), length);
def ChgRatio = if TotChgAvg != 0 then NetChgAvg / TotChgAvg else 0;

plot RSI = 50 * (ChgRatio + 1);
plot MiddleLine = 50;
Middleline.SetDefaultColor(Color.YELLOW);
RSI.SetLineWeight(2);

plot OverSold = over_Sold;
plot OverBought = over_Bought;
plot UpSignal = if RSI crosses above OverSold then OverSold else Double.NaN;
plot DownSignal = if RSI crosses below OverBought then OverBought else Double.NaN;

AddCloud(Over_Bought2, OverBought, Color.dark_RED, Color.CURRENT);
AddCloud(OverSold, Over_Sold2, Color.dark_GREEN, Color.CURRENT);

UpSignal.SetHiding(!showBreakoutSignals);
DownSignal.SetHiding(!showBreakoutSignals);

RSI.DefineColor("OverBought", color.red);
RSI.DefineColor("Normal", GetColor(9));
RSI.DefineColor("OverSold", color.green);
RSI.AssignValueColor(if RSI > over_Bought then RSI.Color("OverBought") else if RSI < over_Sold then RSI.Color("OverSold") else RSI.Color("Normal"));
OverSold.SetDefaultColor(color.green);
OverBought.SetDefaultColor(color.red);
UpSignal.SetDefaultColor(Color.UPTICK);
UpSignal.SetPaintingStrategy(PaintingStrategy.ARROW_UP);
DownSignal.SetDefaultColor(Color.DOWNTICK);
DownSignal.SetPaintingStrategy(PaintingStrategy.ARROW_DOWN);

AddCloud(RSI, OverBought, Color.RED, Color.CURRENT);
AddCloud(OverSold, RSI, Color.GREEN, Color.CURRENT);

### IVPercentile ###
def vol = imp_volatility();
input TimePeriod = 252;

def data = if !isNaN(vol) then vol else vol[-1];
def hi = highest(data, TimePeriod);
def lo = lowest(data, TimePeriod);
plot Percentile = (data - lo) / (hi - lo) * 100;
def lowend = Percentile < 25;
def highend = Percentile > 50;

input over_Bought1 = 98;
input over_Sold1 = 2;

Percentile.DefineColor("OverBought", Color.red);
Percentile.DefineColor("Normal", color.magenta);
Percentile.DefineColor("OverSold", Color.GREEN);
Percentile.AssignValueColor(if Percentile > over_Bought1 then Percentile.color("OverBought") else if Percentile < over_Sold1 then Percentile.color("OverSold") else Percentile.color("Normal"));

AddCloud(percentile, rsi, Color.RED, Color.CURRENT);

### Squeeze Relationship (RSI and IV) ###
def RSIIV = if percentile - RSI >= 40 and RSI < 32 then 1 else 0;
plot HOT = if RSIIV then 50 else Double.nan;
HOT.SetPaintingStrategy(PaintingStrategy.POINTS);
HOT.SetLineWeight(4);
HOT.SetDefaultColor(Color.RED);

def RSIIV1 = if (percentile - RSI >= 30 and RSI > 32 and RSI < 40, 1, Double.NaN);
plot CAUTION = if RSIIV1 then 50 else Double.nan;
CAUTION.SetPaintingStrategy(PaintingStrategy.POINTS);
CAUTION.SetLineWeight(4);
CAUTION.SetDefaultColor(Color.YELLOW);

#Label

def bullish = if RSI > MiddleLine then 1 else 0;
def bearish = if RSI < MiddleLine then 1 else 0;

AddLabel(ChartBubblesOn, if bullish then "BULLISH" else if bearish then "BEARISH" else if RSI > 100 then "hi" else "low", if bullish then color.green else if bearish then color.red else color.black);


def condition1 = percentile - RSI >= 40 and RSI < 32;
def condition2 = percentile - RSI >= 30 and RSI > 32 and RSI < 40;

# Alert
Alert(alertsOn and condition1, "HOT", Alert.BAR, Sound.Chimes);
Alert(alertsOn and condition2, "CAUTION", Alert.BAR, Sound.bell);

Shareable link: http://tos.mx/9zhE6eE

Hot Zone line

#HOTZONE LINE: RSI-IV_percentile indicator
#developed by Chewie76 with help from FateOwnzYou 9-30-2020

### Global Variables ###
declare lower;
input length = 14;
input price = close;
input averageType = AverageType.WILDERS;
input showBreakoutSignals = yes;
input alertsOn = yes;

def NetChgAvg = MovingAverage(averageType, price - price[1], length);
def TotChgAvg = MovingAverage(averageType, AbsValue(price - price[1]), length);
def ChgRatio = if TotChgAvg != 0 then NetChgAvg / TotChgAvg else 0;

def RSI = (50 * (ChgRatio + 1))*-1;
plot MiddleLine = 0;
plot TakeProfit = 60;
plot BUY = -60;
TakeProfit.SetLineWeight(1);
TakeProfit.SetDefaultColor(Color.RED);
BUY.SetLineWeight(1);
BUY.SetDefaultColor(Color.GREEN);

def vol = imp_volatility();
input TimePeriod = 252;

def data = if !isNaN(vol) then vol else vol[-1];
def hi = highest(data, TimePeriod);
def lo = lowest(data, TimePeriod);
def Percentile = ((data - lo) / (hi - lo) * 100)*-1;
def lowend = Percentile < 25;
def highend = Percentile > 50;

plot HotZone = percentile - rsi;
HotZone.SetLineWeight(1);
HotZone.SetDefaultColor(Color.MAGENTA);

AddCloud(middleline, HotZone, Color.red, Color.CURRENT);
AddCloud(takeprofit,HotZone, Color.CURRENT, Color.GREEN);


### Caution Relationship (RSI and IV) ###
plot CAUTION = if(HotZone <-45 and HotZone > -60,1,double.nan);
#plot CAUTION = if RSIIV1 then 0 else Double.nan;
CAUTION.SetPaintingStrategy(PaintingStrategy.POINTS);
CAUTION.SetLineWeight(4);
CAUTION.SetDefaultColor(Color.YELLOW);

### HOT Relationship (RSI and IV) ###
def RSIIV2 = if HotZone <= -60 then 1 else 0;
plot HOT = if RSIIV2 then 0 else Double.nan;
HOT.SetPaintingStrategy(PaintingStrategy.POINTS);
HOT.SetLineWeight(4);
HOT.SetDefaultColor(Color.RED);

#Arrows#
plot UpSignal = if HotZone crosses above BUY then BUY else Double.NaN;
plot DownSignal = if HotZone crosses below TakeProfit then TakeProfit else Double.NaN;

UpSignal.SetHiding(!showBreakoutSignals);
DownSignal.SetHiding(!showBreakoutSignals);

UpSignal.SetDefaultColor(Color.GREEN);
DownSignal.SetDefaultColor(Color.RED);
UpSignal.SetDefaultColor(Color.UPTICK);
UpSignal.SetPaintingStrategy(PaintingStrategy.ARROW_UP);
DownSignal.SetDefaultColor(Color.DOWNTICK);
DownSignal.SetPaintingStrategy(PaintingStrategy.ARROW_DOWN);

def condition1 = HotZone <= -60;
def condition2 = HotZone < -45 and HotZone > -60;

# Alert
Alert(alertsOn and condition1, "HOT", Alert.BAR, Sound.Chimes);
Alert(alertsOn and condition2, "CAUTION", Alert.BAR, Sound.bell);

Shareable link: http://tos.mx/ZaOhpnv

There are some traders who don't like to use lower indicators. Good news for YOU!!! I created an UPPER indicator that uses BOTH of these into one!!! You can turn on/off the arrows. You can turn on/off the hot and caution dots for the Hotzone and Hotzone line indicators. NOTE: IF you display dots for BOTH indicators, the Hotzone Line dots will plot over the Hotzone indicator dots. If you want to have the opposite, I believe you would just have to move their order within the code.

Below is an example of using the arrows from the HotZone Line indicator with the dots from the HotZone indicator on /ES 15 min chart.

View attachment 8103

Here is the link to the Hotzone UPPER indicator: http://tos.mx/6Co9B16

Do you want to make some serious long term cash?? Monitor the WEEKLY chart and set alerts in the scan for the weekly timeframe. Take a look at the below example of NDX. Hotzone will tell you when to get back into the market after a significant crash!

View attachment 8104



Looking for a watchlist column? Here you go!

HOTZONE RSI Watchlist: http://tos.mx/wjdMkBz
CODE:
#HOTZONE-RSI: WATCHLIST
#developed by Chewie76 9-30-2020
### Global Variables ###
input length = 14;
input over_Bought2 = 80;
input over_Bought = 70;
input over_Sold = 30;
input over_Sold2 = 20;
input price = close;
input averageType = AverageType.WILDERS;
input showBreakoutSignals = yes;

### RSI ###
def NetChgAvg = MovingAverage(averageType, price - price[1], length);
def TotChgAvg = MovingAverage(averageType, AbsValue(price - price[1]), length);
def ChgRatio = if TotChgAvg != 0 then NetChgAvg / TotChgAvg else 0;

DEF RSI = 50 * (ChgRatio + 1);
def MiddleLine = 50;

def OverSold = over_Sold;
def OverBought = over_Bought;
def UpSignal = if RSI crosses above OverSold then 1 else 0;
def DownSignal = if RSI crosses below OverBought then 2 else 0;

### IVPercentile ###
def vol = imp_volatility();
input TimePeriod = 252;

def data = if !isNaN(vol) then vol else vol[-1];
def hi = highest(data, TimePeriod);
def lo = lowest(data, TimePeriod);
def Percentile = (data - lo) / (hi - lo) * 100;
def lowend = Percentile < 25;
def highend = Percentile > 50;

input over_Bought1 = 98;
input over_Sold1 = 2;

### Squeeze Relationship (RSI and IV) ###
def RSIIV = if percentile - RSI >= 40 and RSI < 32 then 1 else 0;
def HOT = if RSIIV then 50 else Double.nan;

def RSIIV1 = if (percentile - RSI >= 30 and RSI > 32 and RSI < 40, 1, Double.NaN);
def CAUTION = if RSIIV1 then 50 else Double.nan;


AssignBackgroundColor(if DownSignal then color.RED else if Upsignal then color.GREEN else color.black);

AddLabel(yes, if Upsignal then "UP" else if Downsignal then "DOWN" else if RSIIV then “HOT” else if RSIIV1 then "CAUTION" else " ", if UPsignal then color.green else if Downsignal then color.red else if RSIIV then color.RED else if RSIIV1 then color.YELLOW else Color.black);

HOTZONE LINE Watchlist: http://tos.mx/lFkTO2b
CODE:
#HOTZONE LINE: WATCHLIST COLUMN
#developed by Chewie76 with help from FateOwnzYou 9-30-2020

### Global Variables ###

input length = 14;
input price = close;
input averageType = AverageType.WILDERS;

def NetChgAvg = MovingAverage(averageType, price - price[1], length);
def TotChgAvg = MovingAverage(averageType, AbsValue(price - price[1]), length);
def ChgRatio = if TotChgAvg != 0 then NetChgAvg / TotChgAvg else 0;

def RSI = (50 * (ChgRatio + 1)) * -1;
def MiddleLine = 0;
def TakeProfit = 60;
def BUY = -60;
def vol = imp_volatility();
input TimePeriod = 252;

def data = if !IsNaN(vol) then vol else vol[-1];
def hi = Highest(data, TimePeriod);
def lo = Lowest(data, TimePeriod);
def Percentile = ((data - lo) / (hi - lo) * 100) * -1;
def lowend = Percentile < 25;
def highend = Percentile > 50;

plot HotZone = Percentile - RSI;

def H = HotZone < -60;
def C = HotZone < -45 and HotZone > -60;

def UpSignal = if HotZone crosses above BUY then 1 else 0;
def DownSignal = if HotZone crosses below TakeProfit then 2 else 0;

AddLabel(yes, if Upsignal then "UP" else if Downsignal then "DOWN" else if H then “HOT” else if C then "CAUTION" else " ", if Upsignal then color.green else if Downsignal then color.red else if H then color.RED else if C then color.YELLOW else Color.BLACK);

AssignBackgroundColor(if H then color.RED else if C then color.YELLOW else color.black);


Adjust the timeframe on it. It will look like the below. It will have a yellow CAUTION for the yellow dot and a red HOT for red dot. The reason there are two columns is because they are set to different timeframes.

View attachment 8105

Looking for a Scan? The below links alert for yellow and red dots along with arrows.

Here is a BUY scan. http://tos.mx/Qh32soR
Here is a SELL scan. http://tos.mx/87AySW1

Let me know what you think!!!!!

Just saw this today. Looks very interesting, but opening the share links merely loads the links (not the charts) and provides no obvious way to get to the charts. Is there a way to share the links so they automatically open the charts?

The arrows should automatically plot.

Just looked at this thread today, and it looks very interesting. When I used the shared links on the 1st page, I just got messages that they were downloaded but no obvious way to get the charts. Do you have any shared links that will directly open the charts you posted on the 1st page?