Fibonacci confluence areas

mika

New member
Is there a script to plot fibonacci confluence areas on weekly and daily charts (intraday)
 
Define confluence? Most use pivot points for .382 and .618 reversal like Robert Miner, and Bryce Gilmore used all fib ratios for time and price. I’m told Scott Carney, the author of harmonic trading, isn’t even a trader, but some try to implement his instruction - though, you have to purchase his software to get the other half of his instruction :). Anyway, there a lot of fib scripts floating around. I may be able to help if your specific about confluence.
 

Join useThinkScript to post your question to a community of 21,000+ developers and traders.

I believe you need to choose two different high / low points to plot the two sets of fib levels and then see the confluence. Plot both manually or plot one auto and a second manually. Maybe someone can figure how to pick the two different high / low points automatically and then the fibs for each..
 
Do not usually draw Fibs but would be something like this with arrows showing areas of confluence.
111111.jpg
 
https://tos.mx/Gf5jWD
https://tos.mx/zU09X3
https://tos.mx/zU09X3
also
Code:
# Limbo_Bars
# Mobius
# V05.02.2016
# Added Labels for Epocs and near term Fibonacci retracements
#hint:<b> Limbo Bars</b>\n Limbo series: Closing for each year in chart aggregation (gray short dashed lines)\n Clustered Multiple year closings (Solid gray thick lines)\n Highest to lowest Fib Sequence for chart agg (thin light green lines)\n Highest to lowest Fib Sequence for adjustable Stochastic Pivots (long gray dashes)\n Sub-Fib Sequences for Current years 68.2 to 100 and 0 (small dashes)
declare Once_per_bar;
input numBars = 21; #hint numbars: bars for near term fib levels
input ClusterValue_1 = 1480.00; #hint ClusterValue_1: Multiple year closing proximity line
input ClusterValue_2 = 1425.00; #hint ClusterValue_2: Multiple year closing proximity line
input ClusterValue_3 = 1250.00; #hint ClusterValue_3: Multiple year closing proximity line
input ClusterValue_4 =  890.00; #hint ClusterValue_4: Multiple year closing proximity line
input showValues = no;
input showBarNumbers = no;
input TrendResistanceStart = 0;
input TrendResistanceEnd = 0;
input TrendSupportStart = 0;
input TrendSupportEnd = 0;
input BubbleOn = yes;
# Study Definitions
   def o = open;
   def h = high;
   def l = low;
   def c = close;
   def bar = BarNumber();
   def yearstart = GetYear() * 10000 + 101;
   def tradingDays = CountTradingDays(yearstart, GetYYYYMMDD());
   def Coeff_1 = .236;
   def Coeff_2 = .382;
   def Coeff_3 = .500;
   def Coeff_4 = .618;
   def Coeff_5 = .786;
#Epoc definitions: Years closing values for the last 20 years
script Epoc {
  input year = 1;
   def bar = barNumber();
   def yearone = CompoundValue(1, if GetYear() == GetLastYear() - year
                                  then bar[1] + 2
                                  else yearone[1], 1);
   def y1 = CompoundValue(1, if bar == yearone
                             then (close[1])
                             else y1[1], Double.NaN);
  plot y1Line = if IsNaN(y1) then Double.NaN else y1;
}
# Start Epocs Plot Sequence
  plot y1L = Epoc(year = 1);
       y1L.SetStyle(Curve.SHORT_DASH);
       y1L.SetDefaultColor(CreateColor(50, 75, 10));
       y1L.SetLineWeight(2);
AddChartBubble(if BubbleOn then y1L and isNaN(y1L[1]) else double.nan, y1L, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y2Line = Epoc(year = 2);
       y2Line.SetStyle(Curve.SHORT_DASH);
       y2Line.SetDefaultColor(CreateColor(50, 75, 10));
       y2Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y2Line and isNaN(y2Line[1]) else double.nan, y2Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y3Line = Epoc(year = 3);
       y3Line.SetStyle(Curve.SHORT_DASH);
       y3Line.SetDefaultColor(CreateColor(50, 75, 10));
       y3Line.SetLineWeight(1);
AddChartBubble(if BubbleOn then y3Line and isNaN(y3Line[1]) else double.nan, y3Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y4Line = Epoc(year = 4);
       y4Line.SetStyle(Curve.SHORT_DASH);
       y4Line.SetDefaultColor(CreateColor(50, 75, 10));
       y4Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y4Line and isNaN(y4Line[1]) else double.nan, y4Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y5Line = Epoc(year = 5);
       y5Line.SetStyle(Curve.SHORT_DASH);
       y5Line.SetDefaultColor(CreateColor(50, 75, 10));
       y5Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y5Line and isNaN(y5Line[1]) else double.nan, y5Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y6Line = Epoc(year = 6);
       y6Line.SetStyle(Curve.SHORT_DASH);
       y6Line.SetDefaultColor(CreateColor(50, 75, 10));
       y6Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y6Line and isNaN(y6Line[1]) else double.nan, y6Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y7Line = Epoc(year = 7);
       y7Line.SetStyle(Curve.SHORT_DASH);
       y7Line.SetDefaultColor(CreateColor(50, 75, 10));
       y7Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y7Line and isNaN(y7Line[1]) else double.nan, y7Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y8Line = Epoc(year = 8);
       y8Line.SetStyle(Curve.SHORT_DASH);
       y8Line.SetDefaultColor(CreateColor(50, 75, 10));
       y8Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y8Line and isNaN(y8Line[1]) else double.nan, y8Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y9Line = Epoc(year = 9);
       y9Line.SetStyle(Curve.SHORT_DASH);
       y9Line.SetDefaultColor(CreateColor(50, 75, 10));
       y9Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y9Line and isNaN(y9Line[1]) else double.nan, y9Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y10Line = Epoc(year = 10);
       y10Line.SetStyle(Curve.SHORT_DASH);
       y10Line.SetDefaultColor(CreateColor(50, 75, 10));
       y10Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y10Line and isNaN(y10Line[1]) else double.nan, y10Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y11Line = Epoc(year = 11);
       y11Line.SetStyle(Curve.SHORT_DASH);
       y11Line.SetDefaultColor(CreateColor(50, 75, 10));
       y11Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y11Line and isNaN(y11Line[1]) else double.nan, y11Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y12Line = Epoc(year = 12);
       y12Line.SetStyle(Curve.SHORT_DASH);
       y12Line.SetDefaultColor(CreateColor(50, 75, 10));
       y12Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y12Line and isNaN(y12Line[1]) else double.nan, y12Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y13Line = Epoc(year = 13);
       y13Line.SetStyle(Curve.SHORT_DASH);
       y13Line.SetDefaultColor(CreateColor(50, 75, 10));
       y13Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y13Line and isNaN(y13Line[1]) else double.nan, y13Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y14Line = Epoc(year = 14);
       y14Line.SetStyle(Curve.SHORT_DASH);
       y14Line.SetDefaultColor(CreateColor(50, 75, 10));
       y14Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y14Line and isNaN(y14Line[1]) else double.nan, y14Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y15Line = Epoc(year = 15);
       y15Line.SetStyle(Curve.SHORT_DASH);
       y15Line.SetDefaultColor(CreateColor(50, 75, 10));
       y15Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y15Line and isNaN(y15Line[1]) else double.nan, y15Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y16Line = Epoc(year = 16);
       y16Line.SetStyle(Curve.SHORT_DASH);
       y16Line.SetDefaultColor(CreateColor(50, 75, 10));
       y16Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y16Line and isNaN(y16Line[1]) else double.nan, y16Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y17Line = Epoc(year = 17);
       y17Line.SetStyle(Curve.SHORT_DASH);
       y17Line.SetDefaultColor(CreateColor(50, 75, 10));
       y17Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y17Line and isNaN(y17Line[1]) else double.nan, y17Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y18Line = Epoc(year = 18);
       y18Line.SetStyle(Curve.SHORT_DASH);
       y18Line.SetDefaultColor(CreateColor(50, 75, 10));
       y18Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y18Line and isNaN(y18Line[1]) else double.nan, y18Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y19Line = Epoc(year = 19);
       y19Line.SetStyle(Curve.SHORT_DASH);
       y19Line.SetDefaultColor(CreateColor(50, 75, 10));
       y19Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y19Line and isNaN(y19Line[1]) else double.nan, y19Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y20Line = Epoc(year = 20);
       y20Line.SetStyle(Curve.SHORT_DASH);
       y20Line.SetDefaultColor(CreateColor(50, 75, 10));
       y20Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y20Line and isNaN(y20Line[1]) else double.nan, y20Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
# End Year Lines
# Plot Year Closing Cluster Values
  Plot Cluster1 = ClusterValue_1;
       Cluster1.SetStyle(Curve.Firm);
       Cluster1.SetLineWeight(3);
       Cluster1.SetDefaultColor(CreateColor(50,50,50));
  Plot Cluster2 = ClusterValue_2;
       Cluster2.SetStyle(Curve.Firm);
       Cluster2.SetLineWeight(3);
       Cluster2.SetDefaultColor(CreateColor(50,50,50));
  Plot Cluster3 = ClusterValue_3;
       Cluster3.SetStyle(Curve.Firm);
       Cluster3.SetLineWeight(3);
       Cluster3.SetDefaultColor(CreateColor(50,50,50));
  Plot Cluster4 = ClusterValue_4;
       Cluster4.SetStyle(Curve.Firm);
       Cluster4.SetLineWeight(3);
       Cluster4.SetDefaultColor(CreateColor(50,50,50));
# First Wave Fibonacci Retracement
script Fibs {
    input C0 = 0.000;
    def o = open;
    def h = high;
    def l = low;
# Get highest and lowest on chart
    def a = HighestAll(h);
    def b = LowestAll(l);
# Get the bar numbers at the highest and lowest points
    def barnumber = BarNumber();
    def c = if h == a
          then barnumber
          else Double.NaN;
    def d = if l == b
          then barnumber
          else Double.NaN;
    def highnumber = CompoundValue(1, if IsNaN(c)
                                    then highnumber[1]
                                    else c, c);
    def highnumberall = HighestAll(highnumber);
    def lownumber = CompoundValue(1, if IsNaN(d)
                                   then lownumber[1]
                                   else d, d);
    def lownumberall = LowestAll(lownumber);
# Determine Slope Delta
    def upward = highnumberall > lownumberall;
    def downward = highnumberall < lownumberall;
# Define X
    def x = AbsValue(lownumberall - highnumberall );
# Get Slope for either direction
    def slope = (a - b) / x;
    def slopelow = (b - a) / x;
# Get Day
    def day = GetDay();
    def month = GetMonth();
    def year = GetYear();
    def lastDay = GetLastDay();
    def lastmonth = GetLastMonth();
    def lastyear = GetLastYear();
    def isToday = If(day == lastDay and
                   month == lastmonth and
                   year == lastyear, 1, 0);
    def istodaybarnumber = HighestAll(if isToday
                                    then barnumber
                                    else Double.NaN);
# Calculations for line between extremes
    def line = b + (slope * (barnumber - lownumber));
    def linelow = a + (slopelow * (barnumber - highnumber));
    def currentlinelow = if barnumber <= lownumberall
                       then linelow
                       else Double.NaN;
    def currentline = if barnumber <= highnumberall
                  then line
                  else Double.NaN;
    def FibFan =  if downward
                then currentlinelow
                else if upward
                then currentline
                else Double.NaN;
# Rise of line between Extremes
   def range =  a - b;
  plot Fib1 = fold i = 1 to 100
              with p = FibFan
              while (downward and
                    barnumber >= highnumberall and
                    barnumber <= istodaybarnumber)
                    or
                    (upward and
                    barnumber >= lownumberall and
                    barnumber <= istodaybarnumber)             
              do if downward
                 then HighestAll((b + (range *  C0)))
                 else if upward
                 then HighestAll(a - (range * C0))
                 else Double.NaN;
}
# Start Plot Sequence
input C0 = 0.000;
input C1 = .236;
input C2 = .382;
input C3 = .500;
input C4 = .618;
input C5 = .786;
input C6 = 1.000;

   def TotalBars = HighestAll(bar);
   def HHbar = if high == highestAll(high)
               then bar
               else HHbar[1];
   def LLbar = if low == lowestAll(low)
               then bar
               else LLbar[1];
   def firstBar = if HHbar > LLbar
                  then LLbar
                  else if HHbar < LLbar
                  then HHbar
                  else Double.NaN;
   def BubbleLocation =  if bar - (firstBar + HHbar) == LLBar
                         then LLbar
                         else if bar - (firstBar + LLbar) == HHBar
                         then HHbar
                         else double.nan;
  plot fib1 = Round(fibs(C0 = C0), 3);
       fib1.SetDefaultColor(Color.Red);
 AddChartBubble((if BubbleOn then BubbleLocation else double.nan), fib1
              , (c0 * 100) + "%  $" + fib1, color.gray, yes);
  plot fib2 = Round(fibs(C0 = C1), 3);
       fib2.SetDefaultColor(Color.Red);
 AddChartBubble((if BubbleOn then BubbleLocation else double.nan), fib2
               , (c1 * 100) + "%  $" + fib2, color.gray, yes);
  plot fib3 = Round(fibs(C0 = C2), 3);
       fib3.SetDefaultColor(Color.Red);
 AddChartBubble((if BubbleOn then BubbleLocation else double.nan), fib3
               , concat( (c2 * 100), "%"), color.gray, yes);
  plot fib4 = Round(fibs(C0 = C3), 3);
       fib4.SetDefaultColor(Color.Red);
 AddChartBubble((if BubbleOn then BubbleLocation else double.nan), fib4
               , (c3 * 100) + "%  $" + fib4, color.gray, yes);
  plot fib5 = Round(fibs(C0 = C4), 3);
       fib5.SetDefaultColor(Color.Red);
 AddChartBubble((if BubbleOn then BubbleLocation else double.nan), fib5
               , (c4 * 100) + "%  $" + fib5 , color.gray, yes);
  plot fib6 = Round(fibs(C0 = C5), 3);
       fib6.SetDefaultColor(Color.Red);
 AddChartBubble((if BubbleOn then BubbleLocation else double.nan), fib6
               , (c5 * 100) + "%  $" + fib6, color.gray, yes);
  plot fib7 = Round(fibs(C0 = C6), 3);
       fib7.SetDefaultColor(Color.Red);
 AddChartBubble((if BubbleOn then BubbleLocation else double.nan), fib7
               , (c6 * 100) + "%  $" + fib7, color.gray, yes);
# Second Wave Fib Series
   def UserSetResistance = TrendResistanceStart > 0 and
                           TrendResistanceEnd > 0;
   def UserSetSupport = TrendSupportStart > 0 and
                        TrendSupportEnd > 0;
def PH;
def PL;
   def isHigherThanNextBars = fold i = 1 to numBars + 1
                              with p = 1
                              while p
                              do h > GetValue(h, -i);
       PH = if UserSetResistance and
             ( bar == TrendResistanceStart or
               bar == TrendResistanceEnd )
            then h
            else if !UserSetResistance and
                    (bar > numBars and
                     h == Highest(h, numBars) and
                     isHigherThanNextBars)
            then h
            else Double.NaN;
   def isLowerThanNextBars = fold j = 1 to numBars + 1
                             with q = 1
                             while q
                             do l < GetValue(low, -j);
       PL = if UserSetSupport and
             ( bar == TrendSupportStart or
               bar == TrendSupportEnd )
            then l
            else if !UserSetSupport and
                    (bar > numBars and
                     l == Lowest(l, numBars) and
                     isLowerThanNextBars)
            then l
            else Double.NaN;
   def PHBar = if UserSetResistance
               then TrendResistanceEnd
               else if !IsNaN(PH)
               then bar
               else PHBar[1];
   def PLBar = if UserSetSupport
               then TrendSupportEnd
               else if !IsNaN(PL)
               then bar
               else PLBar[1];
   def PHL = if !IsNaN(PH)
             then PH
             else PHL[1];
   def priorPHBar = if UserSetResistance
                    then TrendResistanceStart
                    else if PHL != PHL[1]
                    then PHBar[1]
                    else priorPHBar[1];
   def PLL = if !IsNaN(PL)
             then PL
             else PLL[1];
   def priorPLBar = if UserSetSupport
                    then TrendSupportStart
                    else if PLL != PLL[1]
                    then PLBar[1]
                    else priorPLBar[1];
   def isFinalTwoHighPivots = bar >= HighestAll(priorPHBar);
   def isFinalTwoLowPivots = bar >= HighestAll(priorPLBar);
   def ResistanceFinishOffset = if isFinalTwoHighPivots
                                then bar - PHBar
                                else 0;
   def ResistanceStartOffset = if isFinalTwoHighPivots
                               then bar - priorPHBar
                               else 0;
   def ResistanceSlope = (GetValue(PH, ResistanceFinishOffset) -
                          GetValue(PH, ResistanceStartOffset)) /
                         (PHBar - priorPHBar);
   def SupportFinishOffset = if isFinalTwoLowPivots
                             then bar - PLBar
                             else 0;
   def SupportStartOffset = if isFinalTwoLowPivots
                            then bar - priorPLBar
                            else 0;
   def SupportSlope = (GetValue(PL, SupportFinishOffset) -
                       GetValue(PL, SupportStartOffset)) /
                            (PLBar - priorPLBar);
   def ResistanceExtend = if bar == HighestAll(PHBar)
                          then 1
                          else ResistanceExtend[1];
   def SupportExtend = if bar == HighestAll(PLBar)
                       then 1
                       else SupportExtend[1];
  plot pivotHigh = if isFinalTwoHighPivots
                   then PH
                   else Double.NaN;
   def pivotHighLine = if PHL > 0 and
                          isFinalTwoHighPivots
                       then PHL
                       else double.NaN;
  plot ResistanceLine = pivotHigh;
  plot ResistanceExtension = if ResistanceExtend
                             then (bar - PHBar) * ResistanceSlope + PHL
                             else Double.NaN;
  plot pivotLow = if isFinalTwoLowPivots
                  then PL
                  else Double.NaN;
   def pivotLowLine = if PLL > 0 and
                         isFinalTwoLowPivots
                      then PLL
                      else double.NaN;
  plot SupportLine = pivotLow;
  plot SupportExtension = if SupportExtend
                          then (bar - PLBar) * SupportSlope + PLL
                          else Double.NaN;
  plot BN = bar;
  plot A_H = if isNaN(PivotHighline)
             then PivotHighLine[1]
             else HighestAll(PivotHighLine);
       A_H.SetDefaultColor(Color.Yellow);
  plot X_L = if isNaN(PivotLowLine)
             then PivotLowLine[1]
             else LowestAll(PivotLowLine);
       X_L.SetDefaultColor(Color.Yellow);
   def A = A_H;
   def B = X_L;
   def X = ( ((c - X_L) / (A_H - X_L))) + c;
  plot SeventyEight = (((a - b) * Coeff_5) + B);
  plot SixtyOne    = (((a - B) * Coeff_4) + B);
  plot Fifty       = (a + B) * Coeff_3;
  plot ThirtyEight = ((a - B) * Coeff_2) + B;
  plot TwentyThree = ((a - B) * Coeff_1) + B;
       pivotHigh.SetDefaultColor(Color.Yellow);
       pivotHigh.SetPaintingStrategy(PaintingStrategy.VALUES_ABOVE);
       pivotHigh.SetHiding(!showValues);
       pivotLow.SetDefaultColor(Color.Yellow);
       pivotLow.SetPaintingStrategy(PaintingStrategy.VALUES_BELOW);
       pivotLow.SetHiding(!showValues);
       ResistanceLine.EnableApproximation();
       ResistanceLine.SetDefaultColor(GetColor(5));
       ResistanceExtension.SetDefaultColor(GetColor(5));
       SupportLine.EnableApproximation();
       SupportLine.SetDefaultColor(GetColor(5));
       SupportExtension.SetDefaultColor(GetColor(5));
       BN.SetDefaultColor(GetColor(0));
       BN.SetHiding(!showBarNumbers);
       BN.SetPaintingStrategy(PaintingStrategy.VALUES_BELOW);
       SeventyEight.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
       SeventyEight.SetDefaultColor(Color.Yellow);
       SixtyOne.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
       SixtyOne.SetDefaultColor(Color.Yellow);
       Fifty.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
       Fifty.SetDefaultColor(Color.Yellow);
       ThirtyEight.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
       ThirtyEight.SetDefaultColor(Color.Yellow);
       TwentyThree.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
       TwentyThree.SetDefaultColor(Color.Yellow);
AddChartBubble(if BubbleOn then isNaN(close[10]) and !isNaN(close[11]) else double.nan,
                                A_H,
                                "Fib " + 1,
                                color.yellow,
                                yes);
AddChartBubble(if BubbleOn then isNaN(close[10]) and !isNaN(close[11]) else double.nan,
                                SeventyEight,
                                "Fib " + Coeff_5,
                                color.yellow,
                                yes);
AddChartBubble(if BubbleOn then isNaN(close[10]) and !isNaN(close[11]) else double.nan,
                                SixtyOne,
                                "Fib " + Coeff_4,
                                color.yellow,
                                yes);
AddChartBubble(if BubbleOn then isNaN(close[10]) and !isNaN(close[11]) else double.nan,
                                Fifty,
                                "Fib " + Coeff_3,
                                color.yellow,
                                yes);
AddChartBubble(if BubbleOn then isNaN(close[10]) and !isNaN(close[11]) else double.nan,
                                ThirtyEight,
                                "Fib " + Coeff_2,
                                color.yellow,
                                yes);
AddChartBubble(if BubbleOn then isNaN(close[10]) and !isNaN(close[11]) else double.nan,
                                TwentyThree,
                                "Fib " + Coeff_1,
                                color.yellow,
                                yes);
AddChartBubble(if BubbleOn then isNaN(close[10]) and !isNaN(close[11]) else double.nan,
                                X_L,
                                "Fib " + 0,
                                color.yellow,
                                yes);
# Fibonacci Time Series
   def bar1 = firstbar;
   def bars = CompoundValue(1, if isNaN(bars[1])
              then firstbar + 2
              else if bar >= firstbar + 2
              then bars[1] + 1
              else 0,firstbar +2);
   def coeff = Sqrt(5);
   def n = Floor(log(bars * coeff + 0.5) / log((1 + Sqrt(5)) / 2));
   def inSeries = n != n[1] and bars >= firstbar;
   def Series = if inSeries
                then bars
                else Double.NaN;
   AddVerticalLine(Series, "FTS: ( " + Series + ")", Color.Blue, Curve.Short_Dash);
# End Code Limbo Bars V05
 
@mcdon030 Thank you for your sharing. I was looking for a similar fibo scan that can allow me to identify areas of confluence. However, I am only interested if i can find both the 61.8% and 38.2% lines on both plots coincide or close to each other. That area may signify a strong support or resistance zone..Is there a way to scan this out or alternatively, how can i have the plots showing only the 61.8% and 38.2% lines. Thank you
 
https://tos.mx/Gf5jWD
https://tos.mx/zU09X3
https://tos.mx/zU09X3
also
Code:
# Limbo_Bars
# Mobius
# V05.02.2016
# Added Labels for Epocs and near term Fibonacci retracements
#hint:<b> Limbo Bars</b>\n Limbo series: Closing for each year in chart aggregation (gray short dashed lines)\n Clustered Multiple year closings (Solid gray thick lines)\n Highest to lowest Fib Sequence for chart agg (thin light green lines)\n Highest to lowest Fib Sequence for adjustable Stochastic Pivots (long gray dashes)\n Sub-Fib Sequences for Current years 68.2 to 100 and 0 (small dashes)
declare Once_per_bar;
input numBars = 21; #hint numbars: bars for near term fib levels
input ClusterValue_1 = 1480.00; #hint ClusterValue_1: Multiple year closing proximity line
input ClusterValue_2 = 1425.00; #hint ClusterValue_2: Multiple year closing proximity line
input ClusterValue_3 = 1250.00; #hint ClusterValue_3: Multiple year closing proximity line
input ClusterValue_4 =  890.00; #hint ClusterValue_4: Multiple year closing proximity line
input showValues = no;
input showBarNumbers = no;
input TrendResistanceStart = 0;
input TrendResistanceEnd = 0;
input TrendSupportStart = 0;
input TrendSupportEnd = 0;
input BubbleOn = yes;
# Study Definitions
   def o = open;
   def h = high;
   def l = low;
   def c = close;
   def bar = BarNumber();
   def yearstart = GetYear() * 10000 + 101;
   def tradingDays = CountTradingDays(yearstart, GetYYYYMMDD());
   def Coeff_1 = .236;
   def Coeff_2 = .382;
   def Coeff_3 = .500;
   def Coeff_4 = .618;
   def Coeff_5 = .786;
#Epoc definitions: Years closing values for the last 20 years
script Epoc {
  input year = 1;
   def bar = barNumber();
   def yearone = CompoundValue(1, if GetYear() == GetLastYear() - year
                                  then bar[1] + 2
                                  else yearone[1], 1);
   def y1 = CompoundValue(1, if bar == yearone
                             then (close[1])
                             else y1[1], Double.NaN);
  plot y1Line = if IsNaN(y1) then Double.NaN else y1;
}
# Start Epocs Plot Sequence
  plot y1L = Epoc(year = 1);
       y1L.SetStyle(Curve.SHORT_DASH);
       y1L.SetDefaultColor(CreateColor(50, 75, 10));
       y1L.SetLineWeight(2);
AddChartBubble(if BubbleOn then y1L and isNaN(y1L[1]) else double.nan, y1L, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y2Line = Epoc(year = 2);
       y2Line.SetStyle(Curve.SHORT_DASH);
       y2Line.SetDefaultColor(CreateColor(50, 75, 10));
       y2Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y2Line and isNaN(y2Line[1]) else double.nan, y2Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y3Line = Epoc(year = 3);
       y3Line.SetStyle(Curve.SHORT_DASH);
       y3Line.SetDefaultColor(CreateColor(50, 75, 10));
       y3Line.SetLineWeight(1);
AddChartBubble(if BubbleOn then y3Line and isNaN(y3Line[1]) else double.nan, y3Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y4Line = Epoc(year = 4);
       y4Line.SetStyle(Curve.SHORT_DASH);
       y4Line.SetDefaultColor(CreateColor(50, 75, 10));
       y4Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y4Line and isNaN(y4Line[1]) else double.nan, y4Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y5Line = Epoc(year = 5);
       y5Line.SetStyle(Curve.SHORT_DASH);
       y5Line.SetDefaultColor(CreateColor(50, 75, 10));
       y5Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y5Line and isNaN(y5Line[1]) else double.nan, y5Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y6Line = Epoc(year = 6);
       y6Line.SetStyle(Curve.SHORT_DASH);
       y6Line.SetDefaultColor(CreateColor(50, 75, 10));
       y6Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y6Line and isNaN(y6Line[1]) else double.nan, y6Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y7Line = Epoc(year = 7);
       y7Line.SetStyle(Curve.SHORT_DASH);
       y7Line.SetDefaultColor(CreateColor(50, 75, 10));
       y7Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y7Line and isNaN(y7Line[1]) else double.nan, y7Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y8Line = Epoc(year = 8);
       y8Line.SetStyle(Curve.SHORT_DASH);
       y8Line.SetDefaultColor(CreateColor(50, 75, 10));
       y8Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y8Line and isNaN(y8Line[1]) else double.nan, y8Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y9Line = Epoc(year = 9);
       y9Line.SetStyle(Curve.SHORT_DASH);
       y9Line.SetDefaultColor(CreateColor(50, 75, 10));
       y9Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y9Line and isNaN(y9Line[1]) else double.nan, y9Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y10Line = Epoc(year = 10);
       y10Line.SetStyle(Curve.SHORT_DASH);
       y10Line.SetDefaultColor(CreateColor(50, 75, 10));
       y10Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y10Line and isNaN(y10Line[1]) else double.nan, y10Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y11Line = Epoc(year = 11);
       y11Line.SetStyle(Curve.SHORT_DASH);
       y11Line.SetDefaultColor(CreateColor(50, 75, 10));
       y11Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y11Line and isNaN(y11Line[1]) else double.nan, y11Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y12Line = Epoc(year = 12);
       y12Line.SetStyle(Curve.SHORT_DASH);
       y12Line.SetDefaultColor(CreateColor(50, 75, 10));
       y12Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y12Line and isNaN(y12Line[1]) else double.nan, y12Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y13Line = Epoc(year = 13);
       y13Line.SetStyle(Curve.SHORT_DASH);
       y13Line.SetDefaultColor(CreateColor(50, 75, 10));
       y13Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y13Line and isNaN(y13Line[1]) else double.nan, y13Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y14Line = Epoc(year = 14);
       y14Line.SetStyle(Curve.SHORT_DASH);
       y14Line.SetDefaultColor(CreateColor(50, 75, 10));
       y14Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y14Line and isNaN(y14Line[1]) else double.nan, y14Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y15Line = Epoc(year = 15);
       y15Line.SetStyle(Curve.SHORT_DASH);
       y15Line.SetDefaultColor(CreateColor(50, 75, 10));
       y15Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y15Line and isNaN(y15Line[1]) else double.nan, y15Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y16Line = Epoc(year = 16);
       y16Line.SetStyle(Curve.SHORT_DASH);
       y16Line.SetDefaultColor(CreateColor(50, 75, 10));
       y16Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y16Line and isNaN(y16Line[1]) else double.nan, y16Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y17Line = Epoc(year = 17);
       y17Line.SetStyle(Curve.SHORT_DASH);
       y17Line.SetDefaultColor(CreateColor(50, 75, 10));
       y17Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y17Line and isNaN(y17Line[1]) else double.nan, y17Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y18Line = Epoc(year = 18);
       y18Line.SetStyle(Curve.SHORT_DASH);
       y18Line.SetDefaultColor(CreateColor(50, 75, 10));
       y18Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y18Line and isNaN(y18Line[1]) else double.nan, y18Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y19Line = Epoc(year = 19);
       y19Line.SetStyle(Curve.SHORT_DASH);
       y19Line.SetDefaultColor(CreateColor(50, 75, 10));
       y19Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y19Line and isNaN(y19Line[1]) else double.nan, y19Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y20Line = Epoc(year = 20);
       y20Line.SetStyle(Curve.SHORT_DASH);
       y20Line.SetDefaultColor(CreateColor(50, 75, 10));
       y20Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y20Line and isNaN(y20Line[1]) else double.nan, y20Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
# End Year Lines
# Plot Year Closing Cluster Values
  Plot Cluster1 = ClusterValue_1;
       Cluster1.SetStyle(Curve.Firm);
       Cluster1.SetLineWeight(3);
       Cluster1.SetDefaultColor(CreateColor(50,50,50));
  Plot Cluster2 = ClusterValue_2;
       Cluster2.SetStyle(Curve.Firm);
       Cluster2.SetLineWeight(3);
       Cluster2.SetDefaultColor(CreateColor(50,50,50));
  Plot Cluster3 = ClusterValue_3;
       Cluster3.SetStyle(Curve.Firm);
       Cluster3.SetLineWeight(3);
       Cluster3.SetDefaultColor(CreateColor(50,50,50));
  Plot Cluster4 = ClusterValue_4;
       Cluster4.SetStyle(Curve.Firm);
       Cluster4.SetLineWeight(3);
       Cluster4.SetDefaultColor(CreateColor(50,50,50));
# First Wave Fibonacci Retracement
script Fibs {
    input C0 = 0.000;
    def o = open;
    def h = high;
    def l = low;
# Get highest and lowest on chart
    def a = HighestAll(h);
    def b = LowestAll(l);
# Get the bar numbers at the highest and lowest points
    def barnumber = BarNumber();
    def c = if h == a
          then barnumber
          else Double.NaN;
    def d = if l == b
          then barnumber
          else Double.NaN;
    def highnumber = CompoundValue(1, if IsNaN(c)
                                    then highnumber[1]
                                    else c, c);
    def highnumberall = HighestAll(highnumber);
    def lownumber = CompoundValue(1, if IsNaN(d)
                                   then lownumber[1]
                                   else d, d);
    def lownumberall = LowestAll(lownumber);
# Determine Slope Delta
    def upward = highnumberall > lownumberall;
    def downward = highnumberall < lownumberall;
# Define X
    def x = AbsValue(lownumberall - highnumberall );
# Get Slope for either direction
    def slope = (a - b) / x;
    def slopelow = (b - a) / x;
# Get Day
    def day = GetDay();
    def month = GetMonth();
    def year = GetYear();
    def lastDay = GetLastDay();
    def lastmonth = GetLastMonth();
    def lastyear = GetLastYear();
    def isToday = If(day == lastDay and
                   month == lastmonth and
                   year == lastyear, 1, 0);
    def istodaybarnumber = HighestAll(if isToday
                                    then barnumber
                                    else Double.NaN);
# Calculations for line between extremes
    def line = b + (slope * (barnumber - lownumber));
    def linelow = a + (slopelow * (barnumber - highnumber));
    def currentlinelow = if barnumber <= lownumberall
                       then linelow
                       else Double.NaN;
    def currentline = if barnumber <= highnumberall
                  then line
                  else Double.NaN;
    def FibFan =  if downward
                then currentlinelow
                else if upward
                then currentline
                else Double.NaN;
# Rise of line between Extremes
   def range =  a - b;
  plot Fib1 = fold i = 1 to 100
              with p = FibFan
              while (downward and
                    barnumber >= highnumberall and
                    barnumber <= istodaybarnumber)
                    or
                    (upward and
                    barnumber >= lownumberall and
                    barnumber <= istodaybarnumber)            
              do if downward
                 then HighestAll((b + (range *  C0)))
                 else if upward
                 then HighestAll(a - (range * C0))
                 else Double.NaN;
}
# Start Plot Sequence
input C0 = 0.000;
input C1 = .236;
input C2 = .382;
input C3 = .500;
input C4 = .618;
input C5 = .786;
input C6 = 1.000;

   def TotalBars = HighestAll(bar);
   def HHbar = if high == highestAll(high)
               then bar
               else HHbar[1];
   def LLbar = if low == lowestAll(low)
               then bar
               else LLbar[1];
   def firstBar = if HHbar > LLbar
                  then LLbar
                  else if HHbar < LLbar
                  then HHbar
                  else Double.NaN;
   def BubbleLocation =  if bar - (firstBar + HHbar) == LLBar
                         then LLbar
                         else if bar - (firstBar + LLbar) == HHBar
                         then HHbar
                         else double.nan;
  plot fib1 = Round(fibs(C0 = C0), 3);
       fib1.SetDefaultColor(Color.Red);
 AddChartBubble((if BubbleOn then BubbleLocation else double.nan), fib1
              , (c0 * 100) + "%  $" + fib1, color.gray, yes);
  plot fib2 = Round(fibs(C0 = C1), 3);
       fib2.SetDefaultColor(Color.Red);
 AddChartBubble((if BubbleOn then BubbleLocation else double.nan), fib2
               , (c1 * 100) + "%  $" + fib2, color.gray, yes);
  plot fib3 = Round(fibs(C0 = C2), 3);
       fib3.SetDefaultColor(Color.Red);
 AddChartBubble((if BubbleOn then BubbleLocation else double.nan), fib3
               , concat( (c2 * 100), "%"), color.gray, yes);
  plot fib4 = Round(fibs(C0 = C3), 3);
       fib4.SetDefaultColor(Color.Red);
 AddChartBubble((if BubbleOn then BubbleLocation else double.nan), fib4
               , (c3 * 100) + "%  $" + fib4, color.gray, yes);
  plot fib5 = Round(fibs(C0 = C4), 3);
       fib5.SetDefaultColor(Color.Red);
 AddChartBubble((if BubbleOn then BubbleLocation else double.nan), fib5
               , (c4 * 100) + "%  $" + fib5 , color.gray, yes);
  plot fib6 = Round(fibs(C0 = C5), 3);
       fib6.SetDefaultColor(Color.Red);
 AddChartBubble((if BubbleOn then BubbleLocation else double.nan), fib6
               , (c5 * 100) + "%  $" + fib6, color.gray, yes);
  plot fib7 = Round(fibs(C0 = C6), 3);
       fib7.SetDefaultColor(Color.Red);
 AddChartBubble((if BubbleOn then BubbleLocation else double.nan), fib7
               , (c6 * 100) + "%  $" + fib7, color.gray, yes);
# Second Wave Fib Series
   def UserSetResistance = TrendResistanceStart > 0 and
                           TrendResistanceEnd > 0;
   def UserSetSupport = TrendSupportStart > 0 and
                        TrendSupportEnd > 0;
def PH;
def PL;
   def isHigherThanNextBars = fold i = 1 to numBars + 1
                              with p = 1
                              while p
                              do h > GetValue(h, -i);
       PH = if UserSetResistance and
             ( bar == TrendResistanceStart or
               bar == TrendResistanceEnd )
            then h
            else if !UserSetResistance and
                    (bar > numBars and
                     h == Highest(h, numBars) and
                     isHigherThanNextBars)
            then h
            else Double.NaN;
   def isLowerThanNextBars = fold j = 1 to numBars + 1
                             with q = 1
                             while q
                             do l < GetValue(low, -j);
       PL = if UserSetSupport and
             ( bar == TrendSupportStart or
               bar == TrendSupportEnd )
            then l
            else if !UserSetSupport and
                    (bar > numBars and
                     l == Lowest(l, numBars) and
                     isLowerThanNextBars)
            then l
            else Double.NaN;
   def PHBar = if UserSetResistance
               then TrendResistanceEnd
               else if !IsNaN(PH)
               then bar
               else PHBar[1];
   def PLBar = if UserSetSupport
               then TrendSupportEnd
               else if !IsNaN(PL)
               then bar
               else PLBar[1];
   def PHL = if !IsNaN(PH)
             then PH
             else PHL[1];
   def priorPHBar = if UserSetResistance
                    then TrendResistanceStart
                    else if PHL != PHL[1]
                    then PHBar[1]
                    else priorPHBar[1];
   def PLL = if !IsNaN(PL)
             then PL
             else PLL[1];
   def priorPLBar = if UserSetSupport
                    then TrendSupportStart
                    else if PLL != PLL[1]
                    then PLBar[1]
                    else priorPLBar[1];
   def isFinalTwoHighPivots = bar >= HighestAll(priorPHBar);
   def isFinalTwoLowPivots = bar >= HighestAll(priorPLBar);
   def ResistanceFinishOffset = if isFinalTwoHighPivots
                                then bar - PHBar
                                else 0;
   def ResistanceStartOffset = if isFinalTwoHighPivots
                               then bar - priorPHBar
                               else 0;
   def ResistanceSlope = (GetValue(PH, ResistanceFinishOffset) -
                          GetValue(PH, ResistanceStartOffset)) /
                         (PHBar - priorPHBar);
   def SupportFinishOffset = if isFinalTwoLowPivots
                             then bar - PLBar
                             else 0;
   def SupportStartOffset = if isFinalTwoLowPivots
                            then bar - priorPLBar
                            else 0;
   def SupportSlope = (GetValue(PL, SupportFinishOffset) -
                       GetValue(PL, SupportStartOffset)) /
                            (PLBar - priorPLBar);
   def ResistanceExtend = if bar == HighestAll(PHBar)
                          then 1
                          else ResistanceExtend[1];
   def SupportExtend = if bar == HighestAll(PLBar)
                       then 1
                       else SupportExtend[1];
  plot pivotHigh = if isFinalTwoHighPivots
                   then PH
                   else Double.NaN;
   def pivotHighLine = if PHL > 0 and
                          isFinalTwoHighPivots
                       then PHL
                       else double.NaN;
  plot ResistanceLine = pivotHigh;
  plot ResistanceExtension = if ResistanceExtend
                             then (bar - PHBar) * ResistanceSlope + PHL
                             else Double.NaN;
  plot pivotLow = if isFinalTwoLowPivots
                  then PL
                  else Double.NaN;
   def pivotLowLine = if PLL > 0 and
                         isFinalTwoLowPivots
                      then PLL
                      else double.NaN;
  plot SupportLine = pivotLow;
  plot SupportExtension = if SupportExtend
                          then (bar - PLBar) * SupportSlope + PLL
                          else Double.NaN;
  plot BN = bar;
  plot A_H = if isNaN(PivotHighline)
             then PivotHighLine[1]
             else HighestAll(PivotHighLine);
       A_H.SetDefaultColor(Color.Yellow);
  plot X_L = if isNaN(PivotLowLine)
             then PivotLowLine[1]
             else LowestAll(PivotLowLine);
       X_L.SetDefaultColor(Color.Yellow);
   def A = A_H;
   def B = X_L;
   def X = ( ((c - X_L) / (A_H - X_L))) + c;
  plot SeventyEight = (((a - b) * Coeff_5) + B);
  plot SixtyOne    = (((a - B) * Coeff_4) + B);
  plot Fifty       = (a + B) * Coeff_3;
  plot ThirtyEight = ((a - B) * Coeff_2) + B;
  plot TwentyThree = ((a - B) * Coeff_1) + B;
       pivotHigh.SetDefaultColor(Color.Yellow);
       pivotHigh.SetPaintingStrategy(PaintingStrategy.VALUES_ABOVE);
       pivotHigh.SetHiding(!showValues);
       pivotLow.SetDefaultColor(Color.Yellow);
       pivotLow.SetPaintingStrategy(PaintingStrategy.VALUES_BELOW);
       pivotLow.SetHiding(!showValues);
       ResistanceLine.EnableApproximation();
       ResistanceLine.SetDefaultColor(GetColor(5));
       ResistanceExtension.SetDefaultColor(GetColor(5));
       SupportLine.EnableApproximation();
       SupportLine.SetDefaultColor(GetColor(5));
       SupportExtension.SetDefaultColor(GetColor(5));
       BN.SetDefaultColor(GetColor(0));
       BN.SetHiding(!showBarNumbers);
       BN.SetPaintingStrategy(PaintingStrategy.VALUES_BELOW);
       SeventyEight.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
       SeventyEight.SetDefaultColor(Color.Yellow);
       SixtyOne.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
       SixtyOne.SetDefaultColor(Color.Yellow);
       Fifty.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
       Fifty.SetDefaultColor(Color.Yellow);
       ThirtyEight.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
       ThirtyEight.SetDefaultColor(Color.Yellow);
       TwentyThree.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
       TwentyThree.SetDefaultColor(Color.Yellow);
AddChartBubble(if BubbleOn then isNaN(close[10]) and !isNaN(close[11]) else double.nan,
                                A_H,
                                "Fib " + 1,
                                color.yellow,
                                yes);
AddChartBubble(if BubbleOn then isNaN(close[10]) and !isNaN(close[11]) else double.nan,
                                SeventyEight,
                                "Fib " + Coeff_5,
                                color.yellow,
                                yes);
AddChartBubble(if BubbleOn then isNaN(close[10]) and !isNaN(close[11]) else double.nan,
                                SixtyOne,
                                "Fib " + Coeff_4,
                                color.yellow,
                                yes);
AddChartBubble(if BubbleOn then isNaN(close[10]) and !isNaN(close[11]) else double.nan,
                                Fifty,
                                "Fib " + Coeff_3,
                                color.yellow,
                                yes);
AddChartBubble(if BubbleOn then isNaN(close[10]) and !isNaN(close[11]) else double.nan,
                                ThirtyEight,
                                "Fib " + Coeff_2,
                                color.yellow,
                                yes);
AddChartBubble(if BubbleOn then isNaN(close[10]) and !isNaN(close[11]) else double.nan,
                                TwentyThree,
                                "Fib " + Coeff_1,
                                color.yellow,
                                yes);
AddChartBubble(if BubbleOn then isNaN(close[10]) and !isNaN(close[11]) else double.nan,
                                X_L,
                                "Fib " + 0,
                                color.yellow,
                                yes);
# Fibonacci Time Series
   def bar1 = firstbar;
   def bars = CompoundValue(1, if isNaN(bars[1])
              then firstbar + 2
              else if bar >= firstbar + 2
              then bars[1] + 1
              else 0,firstbar +2);
   def coeff = Sqrt(5);
   def n = Floor(log(bars * coeff + 0.5) / log((1 + Sqrt(5)) / 2));
   def inSeries = n != n[1] and bars >= firstbar;
   def Series = if inSeries
                then bars
                else Double.NaN;
   AddVerticalLine(Series, "FTS: ( " + Series + ")", Color.Blue, Curve.Short_Dash);
# End Code Limbo Bars V05
[/CODE
[QUOTE="mcdon030, post: 14223, member: 1440"]
[URL unfurl="true"]https://tos.mx/Gf5jWD[/URL]

[URL unfurl="true"]https://tos.mx/zU09X3[/URL]

[URL unfurl="true"]https://tos.mx/zU09X3[/URL]

also
[CODE]# Limbo_Bars
# Mobius
# V05.02.2016
# Added Labels for Epocs and near term Fibonacci retracements
#hint:<b> Limbo Bars</b>\n Limbo series: Closing for each year in chart aggregation (gray short dashed lines)\n Clustered Multiple year closings (Solid gray thick lines)\n Highest to lowest Fib Sequence for chart agg (thin light green lines)\n Highest to lowest Fib Sequence for adjustable Stochastic Pivots (long gray dashes)\n Sub-Fib Sequences for Current years 68.2 to 100 and 0 (small dashes)
declare Once_per_bar;
input numBars = 21; #hint numbars: bars for near term fib levels
input ClusterValue_1 = 1480.00; #hint ClusterValue_1: Multiple year closing proximity line
input ClusterValue_2 = 1425.00; #hint ClusterValue_2: Multiple year closing proximity line
input ClusterValue_3 = 1250.00; #hint ClusterValue_3: Multiple year closing proximity line
input ClusterValue_4 =  890.00; #hint ClusterValue_4: Multiple year closing proximity line
input showValues = no;
input showBarNumbers = no;
input TrendResistanceStart = 0;
input TrendResistanceEnd = 0;
input TrendSupportStart = 0;
input TrendSupportEnd = 0;
input BubbleOn = yes;
# Study Definitions
   def o = open;
   def h = high;
   def l = low;
   def c = close;
   def bar = BarNumber();
   def yearstart = GetYear() * 10000 + 101;
   def tradingDays = CountTradingDays(yearstart, GetYYYYMMDD());
   def Coeff_1 = .236;
   def Coeff_2 = .382;
   def Coeff_3 = .500;
   def Coeff_4 = .618;
   def Coeff_5 = .786;
#Epoc definitions: Years closing values for the last 20 years
script Epoc {
  input year = 1;
   def bar = barNumber();
   def yearone = CompoundValue(1, if GetYear() == GetLastYear() - year
                                  then bar[1] + 2
                                  else yearone[1], 1);
   def y1 = CompoundValue(1, if bar == yearone
                             then (close[1])
                             else y1[1], Double.NaN);
  plot y1Line = if IsNaN(y1) then Double.NaN else y1;
}
# Start Epocs Plot Sequence
  plot y1L = Epoc(year = 1);
       y1L.SetStyle(Curve.SHORT_DASH);
       y1L.SetDefaultColor(CreateColor(50, 75, 10));
       y1L.SetLineWeight(2);
AddChartBubble(if BubbleOn then y1L and isNaN(y1L[1]) else double.nan, y1L, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y2Line = Epoc(year = 2);
       y2Line.SetStyle(Curve.SHORT_DASH);
       y2Line.SetDefaultColor(CreateColor(50, 75, 10));
       y2Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y2Line and isNaN(y2Line[1]) else double.nan, y2Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y3Line = Epoc(year = 3);
       y3Line.SetStyle(Curve.SHORT_DASH);
       y3Line.SetDefaultColor(CreateColor(50, 75, 10));
       y3Line.SetLineWeight(1);
AddChartBubble(if BubbleOn then y3Line and isNaN(y3Line[1]) else double.nan, y3Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y4Line = Epoc(year = 4);
       y4Line.SetStyle(Curve.SHORT_DASH);
       y4Line.SetDefaultColor(CreateColor(50, 75, 10));
       y4Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y4Line and isNaN(y4Line[1]) else double.nan, y4Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y5Line = Epoc(year = 5);
       y5Line.SetStyle(Curve.SHORT_DASH);
       y5Line.SetDefaultColor(CreateColor(50, 75, 10));
       y5Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y5Line and isNaN(y5Line[1]) else double.nan, y5Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y6Line = Epoc(year = 6);
       y6Line.SetStyle(Curve.SHORT_DASH);
       y6Line.SetDefaultColor(CreateColor(50, 75, 10));
       y6Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y6Line and isNaN(y6Line[1]) else double.nan, y6Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y7Line = Epoc(year = 7);
       y7Line.SetStyle(Curve.SHORT_DASH);
       y7Line.SetDefaultColor(CreateColor(50, 75, 10));
       y7Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y7Line and isNaN(y7Line[1]) else double.nan, y7Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y8Line = Epoc(year = 8);
       y8Line.SetStyle(Curve.SHORT_DASH);
       y8Line.SetDefaultColor(CreateColor(50, 75, 10));
       y8Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y8Line and isNaN(y8Line[1]) else double.nan, y8Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y9Line = Epoc(year = 9);
       y9Line.SetStyle(Curve.SHORT_DASH);
       y9Line.SetDefaultColor(CreateColor(50, 75, 10));
       y9Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y9Line and isNaN(y9Line[1]) else double.nan, y9Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y10Line = Epoc(year = 10);
       y10Line.SetStyle(Curve.SHORT_DASH);
       y10Line.SetDefaultColor(CreateColor(50, 75, 10));
       y10Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y10Line and isNaN(y10Line[1]) else double.nan, y10Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y11Line = Epoc(year = 11);
       y11Line.SetStyle(Curve.SHORT_DASH);
       y11Line.SetDefaultColor(CreateColor(50, 75, 10));
       y11Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y11Line and isNaN(y11Line[1]) else double.nan, y11Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y12Line = Epoc(year = 12);
       y12Line.SetStyle(Curve.SHORT_DASH);
       y12Line.SetDefaultColor(CreateColor(50, 75, 10));
       y12Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y12Line and isNaN(y12Line[1]) else double.nan, y12Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y13Line = Epoc(year = 13);
       y13Line.SetStyle(Curve.SHORT_DASH);
       y13Line.SetDefaultColor(CreateColor(50, 75, 10));
       y13Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y13Line and isNaN(y13Line[1]) else double.nan, y13Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y14Line = Epoc(year = 14);
       y14Line.SetStyle(Curve.SHORT_DASH);
       y14Line.SetDefaultColor(CreateColor(50, 75, 10));
       y14Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y14Line and isNaN(y14Line[1]) else double.nan, y14Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y15Line = Epoc(year = 15);
       y15Line.SetStyle(Curve.SHORT_DASH);
       y15Line.SetDefaultColor(CreateColor(50, 75, 10));
       y15Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y15Line and isNaN(y15Line[1]) else double.nan, y15Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y16Line = Epoc(year = 16);
       y16Line.SetStyle(Curve.SHORT_DASH);
       y16Line.SetDefaultColor(CreateColor(50, 75, 10));
       y16Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y16Line and isNaN(y16Line[1]) else double.nan, y16Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y17Line = Epoc(year = 17);
       y17Line.SetStyle(Curve.SHORT_DASH);
       y17Line.SetDefaultColor(CreateColor(50, 75, 10));
       y17Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y17Line and isNaN(y17Line[1]) else double.nan, y17Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y18Line = Epoc(year = 18);
       y18Line.SetStyle(Curve.SHORT_DASH);
       y18Line.SetDefaultColor(CreateColor(50, 75, 10));
       y18Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y18Line and isNaN(y18Line[1]) else double.nan, y18Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y19Line = Epoc(year = 19);
       y19Line.SetStyle(Curve.SHORT_DASH);
       y19Line.SetDefaultColor(CreateColor(50, 75, 10));
       y19Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y19Line and isNaN(y19Line[1]) else double.nan, y19Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
  plot y20Line = Epoc(year = 20);
       y20Line.SetStyle(Curve.SHORT_DASH);
       y20Line.SetDefaultColor(CreateColor(50, 75, 10));
       y20Line.SetLineWeight(2);
AddChartBubble(if BubbleOn then y20Line and isNaN(y20Line[1]) else double.nan, y20Line, AsPrice(getYear()) + " Open", CreateColor(50, 75, 10));
# End Year Lines
# Plot Year Closing Cluster Values
  Plot Cluster1 = ClusterValue_1;
       Cluster1.SetStyle(Curve.Firm);
       Cluster1.SetLineWeight(3);
       Cluster1.SetDefaultColor(CreateColor(50,50,50));
  Plot Cluster2 = ClusterValue_2;
       Cluster2.SetStyle(Curve.Firm);
       Cluster2.SetLineWeight(3);
       Cluster2.SetDefaultColor(CreateColor(50,50,50));
  Plot Cluster3 = ClusterValue_3;
       Cluster3.SetStyle(Curve.Firm);
       Cluster3.SetLineWeight(3);
       Cluster3.SetDefaultColor(CreateColor(50,50,50));
  Plot Cluster4 = ClusterValue_4;
       Cluster4.SetStyle(Curve.Firm);
       Cluster4.SetLineWeight(3);
       Cluster4.SetDefaultColor(CreateColor(50,50,50));
# First Wave Fibonacci Retracement
script Fibs {
    input C0 = 0.000;
    def o = open;
    def h = high;
    def l = low;
# Get highest and lowest on chart
    def a = HighestAll(h);
    def b = LowestAll(l);
# Get the bar numbers at the highest and lowest points
    def barnumber = BarNumber();
    def c = if h == a
          then barnumber
          else Double.NaN;
    def d = if l == b
          then barnumber
          else Double.NaN;
    def highnumber = CompoundValue(1, if IsNaN(c)
                                    then highnumber[1]
                                    else c, c);
    def highnumberall = HighestAll(highnumber);
    def lownumber = CompoundValue(1, if IsNaN(d)
                                   then lownumber[1]
                                   else d, d);
    def lownumberall = LowestAll(lownumber);
# Determine Slope Delta
    def upward = highnumberall > lownumberall;
    def downward = highnumberall < lownumberall;
# Define X
    def x = AbsValue(lownumberall - highnumberall );
# Get Slope for either direction
    def slope = (a - b) / x;
    def slopelow = (b - a) / x;
# Get Day
    def day = GetDay();
    def month = GetMonth();
    def year = GetYear();
    def lastDay = GetLastDay();
    def lastmonth = GetLastMonth();
    def lastyear = GetLastYear();
    def isToday = If(day == lastDay and
                   month == lastmonth and
                   year == lastyear, 1, 0);
    def istodaybarnumber = HighestAll(if isToday
                                    then barnumber
                                    else Double.NaN);
# Calculations for line between extremes
    def line = b + (slope * (barnumber - lownumber));
    def linelow = a + (slopelow * (barnumber - highnumber));
    def currentlinelow = if barnumber <= lownumberall
                       then linelow
                       else Double.NaN;
    def currentline = if barnumber <= highnumberall
                  then line
                  else Double.NaN;
    def FibFan =  if downward
                then currentlinelow
                else if upward
                then currentline
                else Double.NaN;
# Rise of line between Extremes
   def range =  a - b;
  plot Fib1 = fold i = 1 to 100
              with p = FibFan
              while (downward and
                    barnumber >= highnumberall and
                    barnumber <= istodaybarnumber)
                    or
                    (upward and
                    barnumber >= lownumberall and
                    barnumber <= istodaybarnumber)            
              do if downward
                 then HighestAll((b + (range *  C0)))
                 else if upward
                 then HighestAll(a - (range * C0))
                 else Double.NaN;
}
# Start Plot Sequence
input C0 = 0.000;
input C1 = .236;
input C2 = .382;
input C3 = .500;
input C4 = .618;
input C5 = .786;
input C6 = 1.000;

   def TotalBars = HighestAll(bar);
   def HHbar = if high == highestAll(high)
               then bar
               else HHbar[1];
   def LLbar = if low == lowestAll(low)
               then bar
               else LLbar[1];
   def firstBar = if HHbar > LLbar
                  then LLbar
                  else if HHbar < LLbar
                  then HHbar
                  else Double.NaN;
   def BubbleLocation =  if bar - (firstBar + HHbar) == LLBar
                         then LLbar
                         else if bar - (firstBar + LLbar) == HHBar
                         then HHbar
                         else double.nan;
  plot fib1 = Round(fibs(C0 = C0), 3);
       fib1.SetDefaultColor(Color.Red);
 AddChartBubble((if BubbleOn then BubbleLocation else double.nan), fib1
              , (c0 * 100) + "%  $" + fib1, color.gray, yes);
  plot fib2 = Round(fibs(C0 = C1), 3);
       fib2.SetDefaultColor(Color.Red);
 AddChartBubble((if BubbleOn then BubbleLocation else double.nan), fib2
               , (c1 * 100) + "%  $" + fib2, color.gray, yes);
  plot fib3 = Round(fibs(C0 = C2), 3);
       fib3.SetDefaultColor(Color.Red);
 AddChartBubble((if BubbleOn then BubbleLocation else double.nan), fib3
               , concat( (c2 * 100), "%"), color.gray, yes);
  plot fib4 = Round(fibs(C0 = C3), 3);
       fib4.SetDefaultColor(Color.Red);
 AddChartBubble((if BubbleOn then BubbleLocation else double.nan), fib4
               , (c3 * 100) + "%  $" + fib4, color.gray, yes);
  plot fib5 = Round(fibs(C0 = C4), 3);
       fib5.SetDefaultColor(Color.Red);
 AddChartBubble((if BubbleOn then BubbleLocation else double.nan), fib5
               , (c4 * 100) + "%  $" + fib5 , color.gray, yes);
  plot fib6 = Round(fibs(C0 = C5), 3);
       fib6.SetDefaultColor(Color.Red);
 AddChartBubble((if BubbleOn then BubbleLocation else double.nan), fib6
               , (c5 * 100) + "%  $" + fib6, color.gray, yes);
  plot fib7 = Round(fibs(C0 = C6), 3);
       fib7.SetDefaultColor(Color.Red);
 AddChartBubble((if BubbleOn then BubbleLocation else double.nan), fib7
               , (c6 * 100) + "%  $" + fib7, color.gray, yes);
# Second Wave Fib Series
   def UserSetResistance = TrendResistanceStart > 0 and
                           TrendResistanceEnd > 0;
   def UserSetSupport = TrendSupportStart > 0 and
                        TrendSupportEnd > 0;
def PH;
def PL;
   def isHigherThanNextBars = fold i = 1 to numBars + 1
                              with p = 1
                              while p
                              do h > GetValue(h, -i);
       PH = if UserSetResistance and
             ( bar == TrendResistanceStart or
               bar == TrendResistanceEnd )
            then h
            else if !UserSetResistance and
                    (bar > numBars and
                     h == Highest(h, numBars) and
                     isHigherThanNextBars)
            then h
            else Double.NaN;
   def isLowerThanNextBars = fold j = 1 to numBars + 1
                             with q = 1
                             while q
                             do l < GetValue(low, -j);
       PL = if UserSetSupport and
             ( bar == TrendSupportStart or
               bar == TrendSupportEnd )
            then l
            else if !UserSetSupport and
                    (bar > numBars and
                     l == Lowest(l, numBars) and
                     isLowerThanNextBars)
            then l
            else Double.NaN;
   def PHBar = if UserSetResistance
               then TrendResistanceEnd
               else if !IsNaN(PH)
               then bar
               else PHBar[1];
   def PLBar = if UserSetSupport
               then TrendSupportEnd
               else if !IsNaN(PL)
               then bar
               else PLBar[1];
   def PHL = if !IsNaN(PH)
             then PH
             else PHL[1];
   def priorPHBar = if UserSetResistance
                    then TrendResistanceStart
                    else if PHL != PHL[1]
                    then PHBar[1]
                    else priorPHBar[1];
   def PLL = if !IsNaN(PL)
             then PL
             else PLL[1];
   def priorPLBar = if UserSetSupport
                    then TrendSupportStart
                    else if PLL != PLL[1]
                    then PLBar[1]
                    else priorPLBar[1];
   def isFinalTwoHighPivots = bar >= HighestAll(priorPHBar);
   def isFinalTwoLowPivots = bar >= HighestAll(priorPLBar);
   def ResistanceFinishOffset = if isFinalTwoHighPivots
                                then bar - PHBar
                                else 0;
   def ResistanceStartOffset = if isFinalTwoHighPivots
                               then bar - priorPHBar
                               else 0;
   def ResistanceSlope = (GetValue(PH, ResistanceFinishOffset) -
                          GetValue(PH, ResistanceStartOffset)) /
                         (PHBar - priorPHBar);
   def SupportFinishOffset = if isFinalTwoLowPivots
                             then bar - PLBar
                             else 0;
   def SupportStartOffset = if isFinalTwoLowPivots
                            then bar - priorPLBar
                            else 0;
   def SupportSlope = (GetValue(PL, SupportFinishOffset) -
                       GetValue(PL, SupportStartOffset)) /
                            (PLBar - priorPLBar);
   def ResistanceExtend = if bar == HighestAll(PHBar)
                          then 1
                          else ResistanceExtend[1];
   def SupportExtend = if bar == HighestAll(PLBar)
                       then 1
                       else SupportExtend[1];
  plot pivotHigh = if isFinalTwoHighPivots
                   then PH
                   else Double.NaN;
   def pivotHighLine = if PHL > 0 and
                          isFinalTwoHighPivots
                       then PHL
                       else double.NaN;
  plot ResistanceLine = pivotHigh;
  plot ResistanceExtension = if ResistanceExtend
                             then (bar - PHBar) * ResistanceSlope + PHL
                             else Double.NaN;
  plot pivotLow = if isFinalTwoLowPivots
                  then PL
                  else Double.NaN;
   def pivotLowLine = if PLL > 0 and
                         isFinalTwoLowPivots
                      then PLL
                      else double.NaN;
  plot SupportLine = pivotLow;
  plot SupportExtension = if SupportExtend
                          then (bar - PLBar) * SupportSlope + PLL
                          else Double.NaN;
  plot BN = bar;
  plot A_H = if isNaN(PivotHighline)
             then PivotHighLine[1]
             else HighestAll(PivotHighLine);
       A_H.SetDefaultColor(Color.Yellow);
  plot X_L = if isNaN(PivotLowLine)
             then PivotLowLine[1]
             else LowestAll(PivotLowLine);
       X_L.SetDefaultColor(Color.Yellow);
   def A = A_H;
   def B = X_L;
   def X = ( ((c - X_L) / (A_H - X_L))) + c;
  plot SeventyEight = (((a - b) * Coeff_5) + B);
  plot SixtyOne    = (((a - B) * Coeff_4) + B);
  plot Fifty       = (a + B) * Coeff_3;
  plot ThirtyEight = ((a - B) * Coeff_2) + B;
  plot TwentyThree = ((a - B) * Coeff_1) + B;
       pivotHigh.SetDefaultColor(Color.Yellow);
       pivotHigh.SetPaintingStrategy(PaintingStrategy.VALUES_ABOVE);
       pivotHigh.SetHiding(!showValues);
       pivotLow.SetDefaultColor(Color.Yellow);
       pivotLow.SetPaintingStrategy(PaintingStrategy.VALUES_BELOW);
       pivotLow.SetHiding(!showValues);
       ResistanceLine.EnableApproximation();
       ResistanceLine.SetDefaultColor(GetColor(5));
       ResistanceExtension.SetDefaultColor(GetColor(5));
       SupportLine.EnableApproximation();
       SupportLine.SetDefaultColor(GetColor(5));
       SupportExtension.SetDefaultColor(GetColor(5));
       BN.SetDefaultColor(GetColor(0));
       BN.SetHiding(!showBarNumbers);
       BN.SetPaintingStrategy(PaintingStrategy.VALUES_BELOW);
       SeventyEight.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
       SeventyEight.SetDefaultColor(Color.Yellow);
       SixtyOne.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
       SixtyOne.SetDefaultColor(Color.Yellow);
       Fifty.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
       Fifty.SetDefaultColor(Color.Yellow);
       ThirtyEight.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
       ThirtyEight.SetDefaultColor(Color.Yellow);
       TwentyThree.SetPaintingStrategy(PaintingStrategy.HORIZONTAL);
       TwentyThree.SetDefaultColor(Color.Yellow);
AddChartBubble(if BubbleOn then isNaN(close[10]) and !isNaN(close[11]) else double.nan,
                                A_H,
                                "Fib " + 1,
                                color.yellow,
                                yes);
AddChartBubble(if BubbleOn then isNaN(close[10]) and !isNaN(close[11]) else double.nan,
                                SeventyEight,
                                "Fib " + Coeff_5,
                                color.yellow,
                                yes);
AddChartBubble(if BubbleOn then isNaN(close[10]) and !isNaN(close[11]) else double.nan,
                                SixtyOne,
                                "Fib " + Coeff_4,
                                color.yellow,
                                yes);
AddChartBubble(if BubbleOn then isNaN(close[10]) and !isNaN(close[11]) else double.nan,
                                Fifty,
                                "Fib " + Coeff_3,
                                color.yellow,
                                yes);
AddChartBubble(if BubbleOn then isNaN(close[10]) and !isNaN(close[11]) else double.nan,
                                ThirtyEight,
                                "Fib " + Coeff_2,
                                color.yellow,
                                yes);
AddChartBubble(if BubbleOn then isNaN(close[10]) and !isNaN(close[11]) else double.nan,
                                TwentyThree,
                                "Fib " + Coeff_1,
                                color.yellow,
                                yes);
AddChartBubble(if BubbleOn then isNaN(close[10]) and !isNaN(close[11]) else double.nan,
                                X_L,
                                "Fib " + 0,
                                color.yellow,
                                yes);
# Fibonacci Time Series
   def bar1 = firstbar;
   def bars = CompoundValue(1, if isNaN(bars[1])
              then firstbar + 2
              else if bar >= firstbar + 2
              then bars[1] + 1
              else 0,firstbar +2);
   def coeff = Sqrt(5);
   def n = Floor(log(bars * coeff + 0.5) / log((1 + Sqrt(5)) / 2));
   def inSeries = n != n[1] and bars >= firstbar;
   def Series = if inSeries
                then bars
                else Double.NaN;
   AddVerticalLine(Series, "FTS: ( " + Series + ")", Color.Blue, Curve.Short_Dash);
# End Code Limbo Bars V05
@mcdon030 Is there any writeup or video on how to use this study?
[/QUOTE]
 

Similar threads

Not the exact question you're looking for?

Start a new thread and receive assistance from our community.

87k+ Posts
530 Online
Create Post

Similar threads

Similar threads

The Market Trading Game Changer

Join 2,500+ subscribers inside the useThinkScript VIP Membership Club
  • Exclusive indicators
  • Proven strategies & setups
  • Private Discord community
  • ‘Buy The Dip’ signal alerts
  • Exclusive members-only content
  • Add-ons and resources
  • 1 full year of unlimited support

Frequently Asked Questions

What is useThinkScript?

useThinkScript is the #1 community of stock market investors using indicators and other tools to power their trading strategies. Traders of all skill levels use our forums to learn about scripting and indicators, help each other, and discover new ways to gain an edge in the markets.

How do I get started?

We get it. Our forum can be intimidating, if not overwhelming. With thousands of topics, tens of thousands of posts, our community has created an incredibly deep knowledge base for stock traders. No one can ever exhaust every resource provided on our site.

If you are new, or just looking for guidance, here are some helpful links to get you started.

What are the benefits of VIP Membership?
VIP members get exclusive access to these proven and tested premium indicators: Buy the Dip, Advanced Market Moves 2.0, Take Profit, and Volatility Trading Range. In addition, VIP members get access to over 50 VIP-only custom indicators, add-ons, and strategies, private VIP-only forums, private Discord channel to discuss trades and strategies in real-time, customer support, trade alerts, and much more. Learn all about VIP membership here.
How can I access the premium indicators?
To access the premium indicators, which are plug and play ready, sign up for VIP membership here.
Back
Top