Repaints Chewie's Super Trend, Hull Average, Donchian Trend Ribbon Trading System for ThinkorSwim

[a1cturner]

Do you know where I can find this on TradingView by chance?

I’m not a frequent user of Trading View but if I remember it’s just called SuperTrend and is available in the indicators section. Couldn’t tell you where that’s at without getting on the computer but I believe it’s at the top left of the chart if I remember correctly

 

[Lesnewby]

Awsome Chewies STHADTR trading system. Thx for sharing!

 

[Jayhook3]

script, Reversal_Indicator
Condition Wizard
The complexity of the expression suggests that it may not be reliable with real-time data.

def price = close;
def superfast_length = 9;
def fast_length = 14;
def slow_length = 21;
def displace = 0;

def mov_avg9 = ExpAverage(price[-displace], superfast_length);
def mov_avg14 = ExpAverage(price[-displace], fast_length);
def mov_avg21 = ExpAverage(price[-displace], slow_length);

#moving averages
def Superfast = mov_avg9;
def Fast = mov_avg14;
def Slow = mov_avg21;

def buy = mov_avg9 > mov_avg14 and mov_avg14 > mov_avg21 and low > mov_avg9;
def stopbuy = mov_avg9 <= mov_avg14;
def buynow = !buy[1] and buy;
def buysignal = CompoundValue(1, if buynow and !stopbuy then 1 else if buysignal[1] == 1 and stopbuy then 0 else buysignal[1], 0);

 

[METAL]

Has anyone used this with success? If so, Please explain how you used it. Thanks in advance!

 

[traintotrade]

I am just starting to use this setup. Ill keep eveyone updated as well. Watching main market tickers for the most part on 4min chart.

 

[JE $$]

@chaseimo Try this...

# filename: Hull_SuperTrend_System_SCAN

#Hull_SuperTrend_Trading_System
# assembled by Chewie 4/10/2022
# many thanks to all the other noted contributors to this system.

# SuperTrend Yahoo Finance Replica - Modified from Modius SuperTrend
# Modified Modius ver. by RConner7
# Modified by Barbaros to replicate look from TradingView version
# Modified by Barbaros to add EMA cross for bubbles and alerts
# Modified by Barbaros to update bar color painting
# v3.3

#input Target_Bubbles = yes;
#input Entry_SL_Bubbles = yes;
#input labels = yes;
#input alertON = no;
input Bands = no;
input EMA1 = 10;
input EMA2 = 20;
input AvgType = AverageType.HULL;
input STAtrMult = 2.75;
input nATR = 12;

def ATR = ATR("length" = nATR, "average type" = AvgType);
def UP_Band_Basic = HL2 + (STAtrMult * ATR);
def LW_Band_Basic = HL2 + (-STAtrMult * ATR);
def UP_Band = if ((UP_Band_Basic < UP_Band[1]) or (close[1] > UP_Band[1])) then UP_Band_Basic else UP_Band[1];
def LW_Band = if ((LW_Band_Basic > LW_Band[1]) or (close[1] < LW_Band[1])) then LW_Band_Basic else LW_Band[1];

def ST = if ((ST[1] == UP_Band[1]) and (close < UP_Band)) then UP_Band
else if ((ST[1] == UP_Band[1]) and (close > UP_Band)) then LW_Band
else if ((ST[1] == LW_Band[1]) and (close > LW_Band)) then LW_Band
else if ((ST[1] == LW_Band) and (close < LW_Band)) then UP_Band
else LW_Band;

def EMA1Val = MovAvgExponential(close, EMA1);
def EMA2Val = MovAvgExponential(close, EMA2);
def EMADirection = if EMA1Val > EMA2Val then 1 else if EMA1Val < EMA2Val then -1 else 0;

def Long = if close > ST then ST else Double.NaN;
def Short = if close < ST then ST else Double.NaN;

def LongTrigger = IsNaN(Long[1]) and !IsNaN(Long);
def ShortTrigger = IsNaN(Short[1]) and !IsNaN(Short);

def LongDot = if LongTrigger then ST else Double.NaN;
def ShortDot = if ShortTrigger then ST else Double.NaN;

#
# Hull Moving Average Concavity and Turning Points
#
# Author: Seth Urion (Mahsume)
# Version: 2020-05-01 V4
#
# Now with support for ToS Mobile - disabled
#

declare upper;

input HMA_Length = 60;
input lookback = 3;
input arrows = no;

def price = HL2;
def HMA = HullMovingAvg(price = price, length = HMA_Length);
def delta = HMA[1] - HMA[lookback + 1];
def delta_per_bar = delta / lookback;
def next_bar = HMA[1] + delta_per_bar;
def concavity = if HMA > next_bar then 1 else -1;

def turning_point = if concavity[1] != concavity then HMA else Double.NaN;

def MA_Max = if HMA[-1] < HMA and HMA > HMA[1] then HMA else Double.NaN;
def MA_Min = if HMA[-1] > HMA and HMA < HMA[1] then HMA else Double.NaN;

#def BuySetup = HMA > HMA[1] and HMA[1] < HMA[2];
#def SellSetup =  HMA < HMA[1] and HMA[1] > HMA[2];

#plot sell = if arrows and turning_point and concavity == -1 then high else Double.NaN;
#sell.SetDefaultColor(Color.DARK_ORANGE);
#sell.SetPaintingStrategy(PaintingStrategy.ARROW_DOWN);
#sell.SetLineWeight(3);
#sell.hide();

#plot buy = if arrows and turning_point and concavity == 1 then low else Double.NaN;
#buy.SetDefaultColor(Color.CYAN);
#buy.SetPaintingStrategy(PaintingStrategy.ARROW_UP);
#buy.SetLineWeight(3);
#buy.hide();

def divergence = HMA - next_bar;


###################
#
# 2020-05-01
#
# MOBILE TOS SUPPORT
#
# Each color of the HMA needs to be a separate plot as ToS Mobile
# lacks the ability to assign colors the way ToS Desktop does.
# I recommend a plain colored HMA behind the line
# Set the line color of the HMA above to gray or some neutral
#
# CCD_D -> ConCave Down and Decreasing
# CCD_I -> ConCave Down and Increasing
# CCU_D -> ConCave Up and Decreasing
# CCU_I -> ConCave Up and Increasing
#
###################
#plot CCD_D = if concavity == -1 and HMA < HMA[1] then HMA else Double.NaN;
#CCD_D.SetDefaultColor(Color.RED);
#CCD_D.SetLineWeight(1);
#CCD_D.hide();

#plot CCD_I = if concavity == -1 and HMA >= HMA[1] then HMA else Double.NaN;
#CCD_I.SetDefaultColor(Color.DARK_ORANGE);
#CCD_I.SetLineWeight(1);
#CCD_I.hide();

#plot CCU_D = if concavity == 1 and HMA <= HMA[1] then HMA else Double.NaN;
#CCU_D.SetDefaultColor(Color.DARK_GREEN);
#CCU_D.SetLineWeight(1);
#CCU_D.hide();

#plot CCU_I = if concavity == 1 and HMA > HMA[1] then HMA else Double.NaN;
#CCU_I.SetDefaultColor(Color.GREEN);
#CCU_I.SetLineWeight(1);
#CCU_I.hide();

#Hull Label

#AddLabel(yes and labels and CCD_D, "HULL:SELL", color.RED);
#AddLabel(yes and labels and CCU_I, "HULL:BUY", color.green);
#AddLabel(yes and labels and CCU_D, "HULL:WEAK SELL", color.dark_green);
#AddLabel(yes and labels and CCD_I, "HULL:WEAK BUY", color.DARK_ORANGE);

#Target lines
# created by chewie

rec line = if IsNaN(MA_Min) then line[1] else MA_Min[0];
def L_stoploss = if IsNaN(MA_Min) then line else Double.NaN;
def LSL = (if IsNaN(L_stoploss[1]) then L_stoploss else Double.NaN);

rec line2 = if IsNaN(MA_Max) then line2[1] else MA_Max[0];
def S_stoploss = if IsNaN(MA_Max) then line2 else Double.NaN;
def SSL = (if IsNaN(S_stoploss[1]) then S_stoploss else Double.NaN);

#Short Entry
rec line3 = if IsNaN(Long) then line3[1] else Long[0];
def S_Entry = if IsNaN(Long) then line3 else Double.NaN;
def SE = (if IsNaN(S_Entry[1]) then S_Entry else Double.NaN);

#Long Entry
rec line4 = if IsNaN(Short) then line4[1] else Short[0];
def L_Entry = if IsNaN(Short) then line4 else Double.NaN;
def LE = (if IsNaN(L_Entry[1]) then L_Entry else Double.NaN);


#HalfX Long
def x1a_Long =  (L_Entry + (L_Entry - L_stoploss) / 2) ;

#OneX Long
def x1_Long = if x1a_Long > line4 then (L_Entry + (L_Entry - L_stoploss)) else Double.NaN;

#TwoX Long
def x2_Long = x1_Long + (L_Entry - L_stoploss) ;
def X2L = (if IsNaN(x2_Long[1]) then x2_Long else Double.NaN);

#ThreeX Long
def x3_Long = x2_Long + (L_Entry - L_stoploss) ;
def X3L = (if IsNaN(x3_Long[1]) then x3_Long else Double.NaN);

#FourX Long
def x4_Long = x3_Long + (L_Entry - L_stoploss) ;
def X4L = (if IsNaN(x4_Long[1]) then x4_Long else Double.NaN);


#HalfX Short
def x1a_Short = (S_Entry - (S_stoploss - S_Entry) / 2);

#OneX Short
def x1_Short = if x1a_Short < line3 then (S_Entry - (S_stoploss - S_Entry)) else Double.NaN;

#TwoX Short
def x2_Short = x1_Short - (S_stoploss - S_Entry);
def X2S = (if IsNaN(x2_Short[1]) then x2_Short else Double.NaN);

#ThreeX Short
def x3_Short = x2_Short - (S_stoploss - S_Entry);
def X3S = (if IsNaN(x3_Short[1]) then x3_Short else Double.NaN);

#FourX Short
def x4_Short = x3_Short - (S_stoploss - S_Entry);
def X4S = (if IsNaN(x4_Short[1]) then x4_Short else Double.NaN);

#LinearRegCh100 RegressionDivergence - Trigger Lines - Trend Cross
# From Lizard Indicators Link: https://www.lizardindicators.com/trigger-lines-cross-vs-thrust/
# Line #1 - Fast = LinReg (80)
# Line #2 - Slow = EXPEMA[LinReg (80)]

input LinRegLength = 80;
input EMAlength = 20;
input ColorOn = yes;

#Definitions
def price1 = close;
def displace = 0;
def LinReg = Inertia(price1[-displace], LinRegLength);
def EMA_LR = ExpAverage(LinReg[-displace], EMAlength);
def Body = (open + close) / 2;

# Defining Long/Short Filters (these instructions determine entries / exits)
# Entry Requirements
def Long_Entry = close > LinReg and close > EMA_LR and Body > LinReg and Body > EMA_LR and close > high[1] and Body > Body[1];
# LinReg > LinReg[1] and
def Long_Stay_In = close > LinReg and close > EMA_LR;
def Long_Exit = (close < LinReg or close < EMA_LR) or Long_Stay_In == 0;
def Long_State = if Long_Entry then 1 else if Long_Exit then 0 else Long_State[1];
def Long1 = Long_State;

# Exit Requirements
def Short_Entry = close < LinReg and close < EMA_LR and Body < LinReg and Body < EMA_LR and close < low[1] and Body < Body[1];
# LinReg < LinReg[1] and
def Short_Stay_In = close < LinReg and close < EMA_LR;
def Short_Exit = (close > LinReg or close > EMA_LR) or Short_Stay_In == 0;
def Short_State = if Short_Entry then 1 else if Short_Exit then 0 else Short_State[1];
def Short1 = Short_State;

#Adding Linear Regression averages
def LR = LinReg;
def EMA_LinReg = EMA_LR;

#Regression Bands

input deviations = 1.618;  #set your deviation units here.
input length = 500; #set your channel lookback period here.

def stdDeviation = StDevAll(price, length);
def HighBand = if Bands then EMA_LinReg + deviations * stdDeviation else Double.NaN;
def LowBand = if Bands then EMA_LinReg - deviations * stdDeviation else Double.NaN;

#200 DAY MOVING AVERAGE

def price2 = close;
def displace2 = 0;
input lengthAvgEXP = 200;

def AvgExp = ExpAverage(price2[-displace2], lengthAvgEXP);

plot Triangle  = if HMA[-1] < HMA and HMA > HMA[1] then HMA else Double.NaN;
#plot Square = if HMA[-1] > HMA and HMA < HMA[1] then HMA else Double.NaN;

Hope this helps...

Good Luck and Good Trading

this does not work for me - i've tried multiple times - can you confirm it works to scan for the triangle or square?

 

[Zlotko]

hi,
@chewie76 what are your setting for Donchian Trend Ribbon?

Very cool but could it be simplified? it looks very busy

 

[tlebouef]

Line : 355
I changed the code slightly to shut off and on coloring bars.
I found it useful to change it as follows.
# Coloring Bars
AssignPriceColor(
if ColorOn and Long_State then Color.GREEN else
if ColorOn and Short_State then Color.RED else
if ColorOn then Color.WHITE else Color.CURRENT );

 

[JoseB]

Yes. It is my main strategy I am using. Trading the ES and NQ, I like the 2 min and 1600T chart. Seeing some good wins!

Can you explain what "1600T chart" means?

 

[MerryDay]

Can you explain what "1600T chart" means?

On the chart:

1. click on timeframe
2. change it from Time to Tick
3. in the Aggregation Period to 1600 ticks

https://tlc.thinkorswim.com/center/...Chart-Aggregation/Setting-up-Chart-Time-Frame

 

[Zlotko]

Sometimes there is no avoiding chop, unless you look at longer timeframes. I like the 3 and 4 min.

Could we just have one signal once all confirmations line up ? and not plot everything else.

 

[gbears96]

@chewie76 Have been following this thread. Your indicator/system looks great!

Curious to find out if anyone is still using the TOS strategy or the base system. I know we saw a good 30 day result when the thread was started. Also, what are the optimal HMA/ATR/timeframe settings people are seeing?

 

[chewie76]

@chewie76 Have been following this thread. Your indicator/system looks great!

Curious to find out if anyone is still using the TOS strategy or the base system. I know we saw a good 30 day result when the thread was started. Also, what are the optimal HMA/ATR/timeframe settings people are seeing?

I'm using the same timeframes in the code. I'm using the base system.

 

[jamesinvest]

Hey chewie would you happen to offer a 1-1 training on this strategy? I'm new and looking to deposit some money to try this strategy out.

 

[chewie76]

Hey chewie would you happen to offer a 1-1 training on this strategy? I'm new and looking to deposit some money to try this strategy out.

I don't. I suggest you spend a few weeks using paper trading account to test it out for yourself before you put money into it.

 

[JoseB]

Anyone tried using the this system on ToS mobile? I was able to get most of it up on my 4 min chart. But I don't see the square/triangle signal. I would appreciate any help.

 

[chewie76]

Anyone tried using the this system on ToS mobile? I was able to get most of it up on my 4 min chart. But I don't see the square/triangle signal. I would appreciate any help.

You have to go into the settings on mobile of the indicator and make those plots a square and a triangle manually. Then you will see them.

 

[JoseB]

You have to go into the settings on mobile of the indicator and make those plots a square and a triangle manually. Then you will see them.

Thanks for getting back to me. Would you mind being a little more specific at to what to change? I'm new with scripting.

 

[stockscouter87]

@chewie76 there a way to only allow the strategy to trade during RTH or is there a way to make it to where it only trades in after hours?? I want to do some back testing with only certain hours. TIA

 

[Zlotko]

I'm using the same timeframes in the code. I'm using the base system.

Chewie76 Very cool I love it but Could you help me to just get one Green VerticalLine for long and one Red VerticalLine for short once we have all confirmations ? and not plot everything else or have option to hide it. I do not script;{