up and down arrow when Priceline is hit

J

JDS

Member
Plus
Hello, how can I get green and red arrows to go off @ each price level? Like once price hits the line going up it flashes green and once price goes down through line it flashes red.
plot Leve00 = 0.00;
plot Leve10 = 0.10;
plot Leve20 = 0.20;
plot Leve30 = 0.30;
 
Solution
TRADERSAM
Here you go. I added inputs so that you can easily make the line be at whatever price you want.

Ruby: 
#inputs
input level00 = 0.00;
input level10 = 0.10;
input level20 = 0.20;
input level30 = 0.30;

#lines
plot LevelLine00 = level00;
plot LevelLine10 = level10;
plot LevelLine20 = level20;
plot LevelLine30 = level30;
LevelLine00.SetDefaultColor(Color.GRAY);
LevelLine10.SetDefaultColor(Color.GRAY);
LevelLine20.SetDefaultColor(Color.GRAY);
LevelLine30.SetDefaultColor(Color.GRAY);

#def
def crossUp00 = close crosses above level00;
def crossDown00 = close crosses below level00;
def crossUp10 = close crosses above level10;
def crossDown10 = close crosses below level10;
def crossUp20 = close crosses above level20;
def crossDown20 = close...
Sort by date Sort by votes
Here you go. I added inputs so that you can easily make the line be at whatever price you want.

Ruby: 
#inputs
input level00 = 0.00;
input level10 = 0.10;
input level20 = 0.20;
input level30 = 0.30;

#lines
plot LevelLine00 = level00;
plot LevelLine10 = level10;
plot LevelLine20 = level20;
plot LevelLine30 = level30;
LevelLine00.SetDefaultColor(Color.GRAY);
LevelLine10.SetDefaultColor(Color.GRAY);
LevelLine20.SetDefaultColor(Color.GRAY);
LevelLine30.SetDefaultColor(Color.GRAY);

#def
def crossUp00 = close crosses above level00;
def crossDown00 = close crosses below level00;
def crossUp10 = close crosses above level10;
def crossDown10 = close crosses below level10;
def crossUp20 = close crosses above level20;
def crossDown20 = close crosses below level20;
def crossUp30 = close crosses above level30;
def crossDown30 = close crosses below level30;


#arrows
plot BullArrow00 = if crossUp00 then low - 0.02 else Double.NaN;
BullArrow00.SetPaintingStrategy(PaintingStrategy.ARROW_UP);
BullArrow00.SetDefaultColor(Color.GREEN);
BullArrow00.SetLineWeight(3);

plot BullArrow10 = if crossUp10 then low - 0.02 else Double.NaN;
BullArrow10.SetPaintingStrategy(PaintingStrategy.ARROW_UP);
BullArrow10.SetDefaultColor(Color.GREEN);
BullArrow10.SetLineWeight(3);

plot BullArrow20 = if crossUp20 then low - 0.02 else Double.NaN;
BullArrow20.SetPaintingStrategy(PaintingStrategy.ARROW_UP);
BullArrow20.SetDefaultColor(Color.GREEN);
BullArrow20.SetLineWeight(3);

plot BullArrow30 = if crossUp30 then low - 0.02 else Double.NaN;
BullArrow30.SetPaintingStrategy(PaintingStrategy.ARROW_UP);
BullArrow30.SetDefaultColor(Color.GREEN);
BullArrow30.SetLineWeight(3);

plot BearArrow00 = if crossDown00 then high + 0.02 else Double.NaN;
BearArrow00.SetPaintingStrategy(PaintingStrategy.ARROW_DOWN);
BearArrow00.SetDefaultColor(Color.RED);
BearArrow00.SetLineWeight(3);

plot BearArrow10 = if crossDown10 then high + 0.02 else Double.NaN;
BearArrow10.SetPaintingStrategy(PaintingStrategy.ARROW_DOWN);
BearArrow10.SetDefaultColor(Color.RED);
BearArrow10.SetLineWeight(3);

plot BearArrow20 = if crossDown20 then high + 0.02 else Double.NaN;
BearArrow20.SetPaintingStrategy(PaintingStrategy.ARROW_DOWN);
BearArrow20.SetDefaultColor(Color.RED);
BearArrow20.SetLineWeight(3);

plot BearArrow30 = if crossDown30 then high + 0.02 else Double.NaN;
BearArrow30.SetPaintingStrategy(PaintingStrategy.ARROW_DOWN);
BearArrow30.SetDefaultColor(Color.RED);
BearArrow30.SetLineWeight(3);
 
Upvote 0 Downvote
Solution
TRADERSAM said:
Here you go. I added inputs so that you can easily make the line be at whatever price you want.

Ruby: 
#inputs
input level00 = 0.00;
input level10 = 0.10;
input level20 = 0.20;
input level30 = 0.30;

#lines
plot LevelLine00 = level00;
plot LevelLine10 = level10;
plot LevelLine20 = level20;
plot LevelLine30 = level30;
LevelLine00.SetDefaultColor(Color.GRAY);
LevelLine10.SetDefaultColor(Color.GRAY);
LevelLine20.SetDefaultColor(Color.GRAY);
LevelLine30.SetDefaultColor(Color.GRAY);

#def
def crossUp00 = close crosses above level00;
def crossDown00 = close crosses below level00;
def crossUp10 = close crosses above level10;
def crossDown10 = close crosses below level10;
def crossUp20 = close crosses above level20;
def crossDown20 = close crosses below level20;
def crossUp30 = close crosses above level30;
def crossDown30 = close crosses below level30;


#arrows
plot BullArrow00 = if crossUp00 then low - 0.02 else Double.NaN;
BullArrow00.SetPaintingStrategy(PaintingStrategy.ARROW_UP);
BullArrow00.SetDefaultColor(Color.GREEN);
BullArrow00.SetLineWeight(3);

plot BullArrow10 = if crossUp10 then low - 0.02 else Double.NaN;
BullArrow10.SetPaintingStrategy(PaintingStrategy.ARROW_UP);
BullArrow10.SetDefaultColor(Color.GREEN);
BullArrow10.SetLineWeight(3);

plot BullArrow20 = if crossUp20 then low - 0.02 else Double.NaN;
BullArrow20.SetPaintingStrategy(PaintingStrategy.ARROW_UP);
BullArrow20.SetDefaultColor(Color.GREEN);
BullArrow20.SetLineWeight(3);

plot BullArrow30 = if crossUp30 then low - 0.02 else Double.NaN;
BullArrow30.SetPaintingStrategy(PaintingStrategy.ARROW_UP);
BullArrow30.SetDefaultColor(Color.GREEN);
BullArrow30.SetLineWeight(3);

plot BearArrow00 = if crossDown00 then high + 0.02 else Double.NaN;
BearArrow00.SetPaintingStrategy(PaintingStrategy.ARROW_DOWN);
BearArrow00.SetDefaultColor(Color.RED);
BearArrow00.SetLineWeight(3);

plot BearArrow10 = if crossDown10 then high + 0.02 else Double.NaN;
BearArrow10.SetPaintingStrategy(PaintingStrategy.ARROW_DOWN);
BearArrow10.SetDefaultColor(Color.RED);
BearArrow10.SetLineWeight(3);

plot BearArrow20 = if crossDown20 then high + 0.02 else Double.NaN;
BearArrow20.SetPaintingStrategy(PaintingStrategy.ARROW_DOWN);
BearArrow20.SetDefaultColor(Color.RED);
BearArrow20.SetLineWeight(3);

plot BearArrow30 = if crossDown30 then high + 0.02 else Double.NaN;
BearArrow30.SetPaintingStrategy(PaintingStrategy.ARROW_DOWN);
BearArrow30.SetDefaultColor(Color.RED);
BearArrow30.SetLineWeight(3);
Click to expand...
Thank you! I really appr
TRADERSAM said:
Here you go. I added inputs so that you can easily make the line be at whatever price you want.

Ruby: 
#inputs
input level00 = 0.00;
input level10 = 0.10;
input level20 = 0.20;
input level30 = 0.30;

#lines
plot LevelLine00 = level00;
plot LevelLine10 = level10;
plot LevelLine20 = level20;
plot LevelLine30 = level30;
LevelLine00.SetDefaultColor(Color.GRAY);
LevelLine10.SetDefaultColor(Color.GRAY);
LevelLine20.SetDefaultColor(Color.GRAY);
LevelLine30.SetDefaultColor(Color.GRAY);

#def
def crossUp00 = close crosses above level00;
def crossDown00 = close crosses below level00;
def crossUp10 = close crosses above level10;
def crossDown10 = close crosses below level10;
def crossUp20 = close crosses above level20;
def crossDown20 = close crosses below level20;
def crossUp30 = close crosses above level30;
def crossDown30 = close crosses below level30;


#arrows
plot BullArrow00 = if crossUp00 then low - 0.02 else Double.NaN;
BullArrow00.SetPaintingStrategy(PaintingStrategy.ARROW_UP);
BullArrow00.SetDefaultColor(Color.GREEN);
BullArrow00.SetLineWeight(3);

plot BullArrow10 = if crossUp10 then low - 0.02 else Double.NaN;
BullArrow10.SetPaintingStrategy(PaintingStrategy.ARROW_UP);
BullArrow10.SetDefaultColor(Color.GREEN);
BullArrow10.SetLineWeight(3);

plot BullArrow20 = if crossUp20 then low - 0.02 else Double.NaN;
BullArrow20.SetPaintingStrategy(PaintingStrategy.ARROW_UP);
BullArrow20.SetDefaultColor(Color.GREEN);
BullArrow20.SetLineWeight(3);

plot BullArrow30 = if crossUp30 then low - 0.02 else Double.NaN;
BullArrow30.SetPaintingStrategy(PaintingStrategy.ARROW_UP);
BullArrow30.SetDefaultColor(Color.GREEN);
BullArrow30.SetLineWeight(3);

plot BearArrow00 = if crossDown00 then high + 0.02 else Double.NaN;
BearArrow00.SetPaintingStrategy(PaintingStrategy.ARROW_DOWN);
BearArrow00.SetDefaultColor(Color.RED);
BearArrow00.SetLineWeight(3);

plot BearArrow10 = if crossDown10 then high + 0.02 else Double.NaN;
BearArrow10.SetPaintingStrategy(PaintingStrategy.ARROW_DOWN);
BearArrow10.SetDefaultColor(Color.RED);
BearArrow10.SetLineWeight(3);

plot BearArrow20 = if crossDown20 then high + 0.02 else Double.NaN;
BearArrow20.SetPaintingStrategy(PaintingStrategy.ARROW_DOWN);
BearArrow20.SetDefaultColor(Color.RED);
BearArrow20.SetLineWeight(3);

plot BearArrow30 = if crossDown30 then high + 0.02 else Double.NaN;
BearArrow30.SetPaintingStrategy(PaintingStrategy.ARROW_DOWN);
BearArrow30.SetDefaultColor(Color.RED);
BearArrow30.SetLineWeight(3);
Click to expand...
TRADERSAM said:
Here you go. I added inputs so that you can easily make the line be at whatever price you want.

Ruby: 
#inputs
input level00 = 0.00;
input level10 = 0.10;
input level20 = 0.20;
input level30 = 0.30;

#lines
plot LevelLine00 = level00;
plot LevelLine10 = level10;
plot LevelLine20 = level20;
plot LevelLine30 = level30;
LevelLine00.SetDefaultColor(Color.GRAY);
LevelLine10.SetDefaultColor(Color.GRAY);
LevelLine20.SetDefaultColor(Color.GRAY);
LevelLine30.SetDefaultColor(Color.GRAY);

#def
def crossUp00 = close crosses above level00;
def crossDown00 = close crosses below level00;
def crossUp10 = close crosses above level10;
def crossDown10 = close crosses below level10;
def crossUp20 = close crosses above level20;
def crossDown20 = close crosses below level20;
def crossUp30 = close crosses above level30;
def crossDown30 = close crosses below level30;


#arrows
plot BullArrow00 = if crossUp00 then low - 0.02 else Double.NaN;
BullArrow00.SetPaintingStrategy(PaintingStrategy.ARROW_UP);
BullArrow00.SetDefaultColor(Color.GREEN);
BullArrow00.SetLineWeight(3);

plot BullArrow10 = if crossUp10 then low - 0.02 else Double.NaN;
BullArrow10.SetPaintingStrategy(PaintingStrategy.ARROW_UP);
BullArrow10.SetDefaultColor(Color.GREEN);
BullArrow10.SetLineWeight(3);

plot BullArrow20 = if crossUp20 then low - 0.02 else Double.NaN;
BullArrow20.SetPaintingStrategy(PaintingStrategy.ARROW_UP);
BullArrow20.SetDefaultColor(Color.GREEN);
BullArrow20.SetLineWeight(3);

plot BullArrow30 = if crossUp30 then low - 0.02 else Double.NaN;
BullArrow30.SetPaintingStrategy(PaintingStrategy.ARROW_UP);
BullArrow30.SetDefaultColor(Color.GREEN);
BullArrow30.SetLineWeight(3);

plot BearArrow00 = if crossDown00 then high + 0.02 else Double.NaN;
BearArrow00.SetPaintingStrategy(PaintingStrategy.ARROW_DOWN);
BearArrow00.SetDefaultColor(Color.RED);
BearArrow00.SetLineWeight(3);

plot BearArrow10 = if crossDown10 then high + 0.02 else Double.NaN;
BearArrow10.SetPaintingStrategy(PaintingStrategy.ARROW_DOWN);
BearArrow10.SetDefaultColor(Color.RED);
BearArrow10.SetLineWeight(3);

plot BearArrow20 = if crossDown20 then high + 0.02 else Double.NaN;
BearArrow20.SetPaintingStrategy(PaintingStrategy.ARROW_DOWN);
BearArrow20.SetDefaultColor(Color.RED);
BearArrow20.SetLineWeight(3);

plot BearArrow30 = if crossDown30 then high + 0.02 else Double.NaN;
BearArrow30.SetPaintingStrategy(PaintingStrategy.ARROW_DOWN);
BearArrow30.SetDefaultColor(Color.RED);
BearArrow30.SetLineWeight(3);
Click to expand...
Thank You So Much!!!
 
Upvote 0 Downvote
You must log in or register to reply here.

Join useThinkScript to post your question to a community of 21,000+ developers and traders.

SIGN UP NOW LEARN MORE
Thread starter Similar threads Forum Replies Date
LLP Value $ amount and arrow up and down for MA Questions 6
M Heiken Ashi Momentum Arrow UP/DOWN on Chart with no WICK Questions 12
L Can I plot momentum on the upper chart? and set an arrow up and down when it break 0? Questions 12
R how to add arrow up/down when lines cross? Questions 2
Bezna$ Chart Bubble Conditional Up or Down Questions 1

Similar threads

Not the exact question you're looking for?

Start a new thread and receive assistance from our community.

87k+ Posts
293 Online
Create Post

Similar threads

Similar threads

The Market Trading Game Changer

Join 2,500+ subscribers inside the useThinkScript VIP Membership Club
  • Exclusive indicators
  • Proven strategies & setups
  • Private Discord community
  • ‘Buy The Dip’ signal alerts
  • Exclusive members-only content
  • Add-ons and resources
  • 1 full year of unlimited support
Try VIP Club Today

Frequently Asked Questions

What is useThinkScript?

useThinkScript is the #1 community of stock market investors using indicators and other tools to power their trading strategies. Traders of all skill levels use our forums to learn about scripting and indicators, help each other, and discover new ways to gain an edge in the markets.

How do I get started?

We get it. Our forum can be intimidating, if not overwhelming. With thousands of topics, tens of thousands of posts, our community has created an incredibly deep knowledge base for stock traders. No one can ever exhaust every resource provided on our site.

If you are new, or just looking for guidance, here are some helpful links to get you started.

What are the benefits of VIP Membership?
VIP members get exclusive access to these proven and tested premium indicators: Buy the Dip, Advanced Market Moves 2.0, Take Profit, and Volatility Trading Range. In addition, VIP members get access to over 50 VIP-only custom indicators, add-ons, and strategies, private VIP-only forums, private Discord channel to discuss trades and strategies in real-time, customer support, trade alerts, and much more. Learn all about VIP membership here.
How can I access the premium indicators?
To access the premium indicators, which are plug and play ready, sign up for VIP membership here.
Back
Top