Archives: RSM Indicator for ThinkorSwim

cos251 · Jan 29, 2021

These are the archived posts for the RSM. The current thread can be found:
https://usethinkscript.com/threads/rsm-indicator-for-thinkorswim.5407/

Update - Version 1.9
Added Feature (thanks to @SleepZ)

Added feature to only plot current ADR Targets and stoploss

Update - Version 1.8
Fixed the following:

Plot Up/Down arrows on weekly chart
Plot uptrend/downtrend stoploss target and price targets on weekly chart
Adjusted shading and trend detection to be greater than 50 or less than 50 (not equal to) per original strategy (thx community)

Update - Version 1.7
A quick update to this indicator for those of you that may be using it. See below for changes in this version.

Added the following:

Added additional price targets (7, 8, 9) as an input option (ShowExtraTargets789) - can be turned on and off independent of targets 1-6 but dependent on trend
Added ADX triangle plot to stoploss in either direction. Indicates if ADX is greater than previous ADX[1] and denotes if ADR has crossed above ADXR for trend confirmation/strength
1. ADX Uptrend - White = ADX > ADX[1], RED = ADX crossed above ADXR, CYAN = ADX > 35
2. ADX DownTrend - Purple = ADX > ADX[1], GREEN = ADX crossed above ADXR, YELLOW = ADX > 35
3. Added ability to show ADX triangles without plotting ADR Targets and Shading

After quite a bit of collaboration from several members - we wanted to provide a central reference point for this indicator. The original request for this write up came from @Joseph Patrick 18 to replicate a well known strategy known as Power X. For the purposes of this indicator, it is being referred to as RSM (RSI, Stochastic,MACD) Indicator.

I'd like to thank the following members for their contributions: @Joseph Patrick 18 , @SuryaKiranC, @RickAns, @TradeUp (and many others, sorry if I forgot you)

Basic requirements for this indicator:

Use RSI, Stochastic and MACD standard indicators (with minor settings tweak) to identify trends
RSI - Set to 7, EXPONENTIAL MOVING AVERAGE
Stochastic Slow- Set to 14 and 3, WILDERS AVERAGE
MACD - Set to 12,26,9 - WEIGHTED AVERAGE
Paint Candles accordintly - (GREEN/UP, RED/DOWN)

Trend Identification

UpTrend = RSI > 50, SlowK > 50, MACD Value > Avg - (Candle color green)
DownTrend = RSI < 50, SlowK < 50, MACD Value < Avg - (Candle color red)
All other instances, candle color gray

Reference material for strategy: https://rockwell-files.s3.amazonaws.com/PXCompanionGuide2ndEd_cover.pdf

Indicators Available (See below for code). The following scripts are provided for this indicator:

RSM Upper - works on any TF and TICK Charts
1. Color candles, Plots Arrows and displays informational labels
2. Most settings can be turned off if desired
RSM Lower
1. 3 Indicators in 1 - can be added to chart seperatly and choose indicator desired
2. Can plot RSI, Stochastic, RSI & Stochastic, or MACD Only as lower study with shading and candle painting
RSM MTF
1. Adds Labels for ALL TF's to show current status of RSM Signal
RSM SCAN - Use to scan for the following:
1. Stocks currently in UpTrend
2. Stocks just starting UpTrend
3. Stocks currently in DownTrend
4. Stocks just starting DownTrend

* - Quick personal note - thanks so much for letting me work on this project and for you patience. I had a chance to learn quite a bit and hopefully improve my trading in the process. Great community here!!!!!!!!!!!

Disclaimer
This indicator may or may not be suitable for you. Constructive criticism welcomed in order to improve. Please report any bugs so we can continue to improve it.

RSM Upper

Features

Paint Bars (Green, Red, Gray)
Shade chart area per trend
Select between trade type (Long,Short,Both)
Dynamic calculation of ADR/ATR at moment of trend start
Select between ADR/ATR for target and stop loss calculations
Plot ADR/ATR target lines while trend is active (on/off)
1. Plot 3 targets up/down by default
Plot additional targets (4-6) if desired (on/off)
Shade the ADR/ATR zones (on/off)
Stop loss multiplier selection
Show Labels for first 3 targets
Show Labels for Trend info

Code:

#START OF RSI/Stochastic/MACD Confluence Strategy for ThinkOrSwim
#RSM_STANDARD_UPPER
#
#CHANGELOG
#
# 2021.05.11 V1.9 @cos251 - Added feature to plot only current ADR Targets and Stoploss
#                            - Feature credit goes to @SleepyZ (thx)
#
# 2021.05.04 V1.8 @cos251 - Fixed >= error to match original strategy as noted by community
#                            - Fixed UpTrend and DownTrend Arrows to display on weekly chart
#                            - Fixed StopLoss and UpTrend/DownTrend targets to display on weekly chart
#
# 2021.04.13 V1.7 @cos251 - Added additional price targets (7, 8, 9) as an input option (ShowExtraTargets789) -
#                            - can be turned on and off independent of targets 1-6 but dependent on trend
#                         - Added ADX triangle plot to stoploss in either direction.  Indicates if ADX #                            - is greater than previous ADX[1] and denotes if ADR has crossed
#                            - above ADXR for trend confirmation/strength
#                            - ADX Uptrend - White = ADX > ADX[1], RED = ADX crossed above ADXR, CYAN = ADX > 35
#                            - ADX DownTrend - Purple = ADX > ADX[1], GREEN = ADX crossed above ADXR, YELLOW = ADX > 35
#
# 2021.01.15 V1.6 @SuryaKirnaC
#                         - Modifed ADR Zones shading colors
#                         - Adjusted Indicator and target labels for space
#                         - Made audible alerts user configurable via settings
#
# 2021.01.04 V1.5 @cos251 - Fixed long, short ADR Zone plots to match TradeType selection (Long, Short, BOTH)
#                         - will only plot as selected
#
# 2020.12.21 V1.4 @cos251 - Added input "plotADR"
#                            - plots dynamic ATR/ADR targets- default plots 3 targets - can be turned off by setting #                              "plotADR" to no
#                         - Added input "showExtraTargets"
#                            -  - plots dynamic ATR/ADR targets- for targets 4, 5, and 6
#                         - Added input "showADRZones"
#                            - Dynamic shading of ATR/ADR targets - can be turned off in settings using "showADRZones"
#                         - Added dynamic calculation of both ATR and ADR. User can select between ATR and ADR in #                              settings
#                         - Added input "showADRLabels"
#                            - Added Dynamic Target labels for UpTrend or DownTrend; they will be green or red #                              depending on Up or Down trend
#                         - Added input "showTodayOnly"
#                            - Added option to display shaded ADR/ATR zones for today only "showTodayOnly"
#                            - if set to no - ADR/ATR plots will be plotted for all available data on chart
#                         - Added ability to plot ATR or ADR on DAY chart - MUST TURN OFF "showTodayOnly"
#                         - Added Labels that can be used for "debug" - MUST change "debug" setting to yes
#                         - Added Trend information labels that can be turned on/off
#                      
#
# 2020.11.30 V1.3 @cos251 - Stripped down TICK Version; No ADR since time based aggregation period do not work on TICK #                           Charts
#
# 2020.11.30 V1.2 @cos251 - Add ADR plots and shading per request; will tweak these settings to improve overall
#                           options
# 2020.11.12 V1.1 @cos251 - Changed from strategy to standard study. Added Green Arrow UP
#                           and Red Arrow down when trend starts.  Added option to change to high
#                           timeframe but this WILL repaint; if used, should be used with other
#                           indicators to confirm an entry/exit.
#
# 2020.10.27 V1.0 @cos251 - Added RSI, StochasticSlow and MACD to same indicator
#                         - also calculates MACD;
#                         - Will shade the lower plot area of the following conditions are met
#                           Shade GREEN = RSI > 50 and SlowK > 50 and (macd)Value > (macd)Avg
#                           Shade RED = RSI < 50 and SlowK < 50 and (macd)Value < (macd)Avg
#
#              
#REQUIREMENTS - RSI Set to 7, EXPONENTIAL
#               Stoch Slow 14 and 3 WILDERS
#               MACD 12,26,9 WEIGHTED


declare upper;
################################################################
##########                 Variables                   #########
################################################################

input paintBars = yes;
input showRSMShade = no;
input tradetype = { "long", "short", default "both" };
input rangeType = { default "ADR", "ATR" };
input stopLossMultiplier = 1.0;
input plotADR = yes;
input showADRZones = yes;
input showCurrentTargetsOnly = yes;
input showTodayOnly = yes;
input showTrendLabels = no;
input showADRLabels = no;
input showExtraTargets = no;
input showExtraTargets789 = no;
input showADXTriangle = yes;
input lengthADX = 21;
input showIndicatorLabels = no;
input audibleAlerts = yes;
input debug = no; # change to "NO" after testing



################################################################
##########              ATR/ADR Calc                   #########
################################################################
input ATRlength = 14;
input ATRaverageType = AverageType.WILDERS;
def Range;
if rangeType == rangeType.ATR {
    Range = MovingAverage(ATRaverageType, TrueRange(high, close, low), ATRlength);
} else {
    Range = Average(high - low, 7);
}

################################################################
##########         Booleans Set for Plot Use           #########
################################################################
def afterStart;
def beforeEnd;
def today;
def openPrice;
if GetAggregationPeriod() <= AggregationPeriod.DAY {
    afterStart = GetTime() > RegularTradingStart(GetYYYYMMDD());
    beforeEnd = GetTime() < RegularTradingEnd(GetYYYYMMDD());
    today = if GetLastDay() == GetDay() then 1 else Double.NaN;
    openPrice = DailyOpen();
} else {
    afterstart = Double.NaN;
    beforeEnd = Double.NaN;
    today = Double.NaN;
    openPrice = Double.NaN;
}

plot DailyO = if openPrice then openPrice else Double.NaN;
AddLabel(if debug then yes else no, "Day = :" + today);
AddLabel(if debug then yes else no, "Day = :" + GetDay());


################################################################
##########           ADX Indicator Reference           #########
################################################################
def ADX = reference ADX();
def ADXR = (ADX + ADX[lengthADX - 1]) / 2;

################################################################
##########                 RSI                         #########
################################################################
input lengthRSI = 7;
input price = close;
input averageTypeRSI = AverageType.EXPONENTIAL;
def NetChgAvg = MovingAverage(averageTypeRSI, close - close[1], lengthRSI);
def TotChgAvg = MovingAverage(averageTypeRSI, AbsValue(close - close[1]), lengthRSI);
def ChgRatio = if TotChgAvg != 0 then NetChgAvg / TotChgAvg else 0;
def RSI = 50 * (ChgRatio + 1);


################################################################
##########                 Stochastic Slow             #########
################################################################
input over_boughtSt = 80;
input over_soldSt = 20;
input KPeriod = 14;
input DPeriod = 3;
input averageTypeStoch = AverageType.WILDERS;
def SlowK = reference StochasticFull(over_boughtSt, over_soldSt, KPeriod, DPeriod, high, low, close, 3, averageTypeStoch).FullK;
def SlowD = reference StochasticFull(over_boughtSt, over_soldSt, KPeriod, DPeriod, high, low, close, 3, averageTypeStoch).FullD;



################################################################
##########                  MACD                       #########
################################################################
input fastLength = 12;
input slowLength = 26;
input MACDLength = 9;
input averageTypeMACD = AverageType.WEIGHTED;
def Value = MovingAverage(averageTypeMACD, close, fastLength) - MovingAverage(averageTypeMACD, close, slowLength);
def Avg = MovingAverage(averageTypeMACD, Value, MACDLength);
def Diff = Value - Avg;



################################################################
##########         Assign Price Color                  #########
################################################################
AssignPriceColor(if paintBars and RSI > 50 and SlowK > 50 and Value > Avg then Color.GREEN else if paintBars and RSI < 50 and SlowK < 50 and Value < Avg then Color.RED else if paintBars then Color.DARK_GRAY else Color.CURRENT);

#################################################################
#####   Up/Down Trend Check/SCAN Variables              #########
#################################################################
plot UpTrend = if RSI > 50 and SlowK > 50 and Value > Avg then 1 else 0;
plot DownTrend = if RSI < 50 and SlowK < 50 and Value < Avg then 1 else 0;
UpTrend.Hide();
DownTrend.Hide();
plot upArrow = if UpTrend == 1 and UpTrend[1] == 0 and (tradetype == tradetype.long or tradetype == tradetype.both) then low else Double.NaN;
upArrow.SetPaintingStrategy(PaintingStrategy.ARROW_UP);
upArrow.SetDefaultColor(Color.GREEN);
upArrow.SetLineWeight(4);
plot downArrow = if DownTrend == 1 and DownTrend[1] == 0 and (tradetype == tradetype.short or tradetype == tradetype.both) then high else Double.NaN;
downArrow.SetPaintingStrategy(PaintingStrategy.ARROW_DOWN);
downArrow.SetDefaultColor(Color.RED);
downArrow.SetLineWeight(4);

def bnumUp;
def bnumDown;
def closeUpTrendStart;
def closeDownTrendStart;
def UpTrendBarCount;
def DownTrendBarCount;
if UpTrend and (!UpTrend[1] or DownTrend[1]) {
    bnumUp = BarNumber();
    bnumDown = 0;
    closeUpTrendStart = close;
    closeDownTrendStart = 0;
    UpTrendBarCount = 1;
    DownTrendBarCount = 0;
} else if UpTrend {
    bnumUp = bnumUp[1];
    bnumDown = 0;
    closeUpTrendStart = closeUpTrendStart[1];
    closeDownTrendStart = 0;
    UpTrendBarCount = UpTrendBarCount[1] + 1;
    DownTrendBarCount = 0;
} else if DownTrend and (!DownTrend[1] or UpTrend[1]) {
    bnumUp = 0;
    bnumDown = BarNumber();
    closeDownTrendStart = close;
    closeUpTrendStart = 0;
    UpTrendBarCount = 0;
    DownTrendBarCount = 1;
} else if DownTrend {
    bnumDown = bnumDown[1];
    closeDownTrendStart = closeDownTrendStart[1];
    DownTrendBarCount = DownTrendBarCount[1] + 1;
    bnumUp = 0;
    closeUpTrendStart = 0;
    UpTrendBarCount = 0;
} else {
    bnumUp = 0;
    bnumDown = 0;
    closeUpTrendStart = 0;
    closeDownTrendStart = 0;
    UpTrendBarCount = 0;
    DownTrendBarCount = 0;
}
def c;
if BarNumber() == bnumUp or BarNumber() == bnumDown {
    c = Range;
} else if UpTrend or DownTrend {
    c = c[1];
} else {
    c = 0;
}
AddLabel(if debug then yes else no, "Current Bar:" + BarNumber());
AddLabel(if debug then yes else no, "C:" + c);
AddLabel( if debug then yes else no, "PlotADR: " + plotADR);
AddLabel( if debug then yes else no, "TodayOnly: " + showTodayOnly);


#################################################################
############        ADR/ATR Targets Shading              #########
#################################################################
def up = if UpTrend   then bnumUp   else Double.NaN;
def dn = if DownTrend then bnumDown else Double.NaN;
# - UpTrend Targets and StopLoss
plot UpTrendStopLoss = if showCurrentTargetsOnly == yes and (bnumUp < Max(HighestAll(dn), HighestAll(up)))
                         then Double.NaN
                         else if (tradetype == tradetype.both or tradetype == tradetype.long) and UpTrend and plotADR and !showTodayOnly then closeUpTrendStart - (c * stopLossMultiplier) else if (tradetype == tradetype.both or tradetype == tradetype.long) and UpTrend and plotADR and showTodayOnly  and today and afterStart and beforeEnd then closeUpTrendStart - c else Double.NaN;
plot oneADRPlus = if showCurrentTargetsOnly == yes and (bnumUp < Max(HighestAll(dn), HighestAll(up)))
                         then Double.NaN
                         else if (tradetype == tradetype.both or tradetype == tradetype.long) and UpTrend and plotADR and !showTodayOnly then closeUpTrendStart + (c * 1) else if (tradetype == tradetype.both or tradetype == tradetype.long) and UpTrend and plotADR and showTodayOnly  and today and afterStart and beforeEnd then closeUpTrendStart + c else Double.NaN;
plot twoADRPlus = if showCurrentTargetsOnly == yes and (bnumUp < Max(HighestAll(dn), HighestAll(up)))
                         then Double.NaN
                         else if (tradetype == tradetype.both or tradetype == tradetype.long) and UpTrend and plotADR and !showTodayOnly then closeUpTrendStart + (c * 2) else if (tradetype == tradetype.both or tradetype == tradetype.long) and UpTrend and plotADR and showTodayOnly  and today and afterStart and beforeEnd then closeUpTrendStart + (c * 2) else Double.NaN;
plot threeADRPlus = if showCurrentTargetsOnly == yes and (bnumUp < Max(HighestAll(dn), HighestAll(up)))
                         then Double.NaN
                         else if (tradetype == tradetype.both or tradetype == tradetype.long) and UpTrend and plotADR and !showTodayOnly then closeUpTrendStart + (c * 3) else if (tradetype == tradetype.both or tradetype == tradetype.long) and UpTrend and plotADR and showTodayOnly  and today and afterStart and beforeEnd then closeUpTrendStart + (c * 3) else Double.NaN;
plot fourADRPlus = if showCurrentTargetsOnly == yes and (bnumUp < Max(HighestAll(dn), HighestAll(up)))
                         then Double.NaN
                         else if (tradetype == tradetype.both or tradetype == tradetype.long) and UpTrend and plotADR and !showTodayOnly and showExtraTargets then closeUpTrendStart + (c * 4) else if (tradetype == tradetype.both or tradetype == tradetype.long) and UpTrend and plotADR and showTodayOnly  and today and afterStart and beforeEnd and showExtraTargets then closeUpTrendStart + (c * 4) else Double.NaN;
plot fiveADRPlus = if showCurrentTargetsOnly == yes and (bnumUp < Max(HighestAll(dn), HighestAll(up)))
                         then Double.NaN
                         else if (tradetype == tradetype.both or tradetype == tradetype.long) and UpTrend and plotADR and !showTodayOnly and showExtraTargets then closeUpTrendStart + (c * 5) else if (tradetype == tradetype.both or tradetype == tradetype.long) and UpTrend and plotADR and showTodayOnly  and today and afterStart and beforeEnd and showExtraTargets then closeUpTrendStart + (c * 5) else Double.NaN;
plot sixADRPlus = if showCurrentTargetsOnly == yes and (bnumUp < Max(HighestAll(dn), HighestAll(up)))
                         then Double.NaN
                         else if (tradetype == tradetype.both or tradetype == tradetype.long) and UpTrend and plotADR and !showTodayOnly and showExtraTargets then closeUpTrendStart + (c * 6) else if (tradetype == tradetype.both or tradetype == tradetype.long) and UpTrend and plotADR and showTodayOnly  and today and afterStart and beforeEnd and showExtraTargets then closeUpTrendStart + (c * 6) else Double.NaN;
plot sevenADRPlus = if showCurrentTargetsOnly == yes and (bnumUp < Max(HighestAll(dn), HighestAll(up)))
                         then Double.NaN
                         else if (tradetype == tradetype.both or tradetype == tradetype.long) and UpTrend and plotADR and !showTodayOnly and showExtraTargets and showExtraTargets789 then closeUpTrendStart + (c * 7) else if (tradetype == tradetype.both or tradetype == tradetype.long) and UpTrend and plotADR and showTodayOnly  and today and afterStart and beforeEnd and showExtraTargets and showExtraTargets789 then closeUpTrendStart + (c * 7) else Double.NaN;
plot eightADRPlus = if showCurrentTargetsOnly == yes and (bnumUp < Max(HighestAll(dn), HighestAll(up)))
                         then Double.NaN
                         else if (tradetype == tradetype.both or tradetype == tradetype.long) and UpTrend and plotADR and !showTodayOnly and showExtraTargets and showExtraTargets789 then closeUpTrendStart + (c * 8) else if (tradetype == tradetype.both or tradetype == tradetype.long) and UpTrend and plotADR and showTodayOnly  and today and afterStart and beforeEnd and showExtraTargets and showExtraTargets789 then closeUpTrendStart + (c * 8) else Double.NaN;
plot nineADRPlus = if showCurrentTargetsOnly == yes and (bnumUp < Max(HighestAll(dn), HighestAll(up)))
                         then Double.NaN
                         else if (tradetype == tradetype.both or tradetype == tradetype.long) and UpTrend and plotADR and !showTodayOnly and showExtraTargets and showExtraTargets789 then closeUpTrendStart + (c * 9) else if (tradetype == tradetype.both or tradetype == tradetype.long) and UpTrend and plotADR and showTodayOnly  and today and afterStart and beforeEnd and showExtraTargets and showExtraTargets789 then closeUpTrendStart + (c * 9) else Double.NaN;

# - DownTrend Targets and StopLoss
plot DownTrendStopLoss = if showCurrentTargetsOnly == yes and (bnumDown < Max(HighestAll(dn), HighestAll(up)))
                         then Double.NaN
                         else if (tradetype == tradetype.both or tradetype == tradetype.short) and DownTrend and plotADR and !showTodayOnly then closeDownTrendStart + (c * stopLossMultiplier) else if (tradetype == tradetype.both or tradetype == tradetype.short) and DownTrend and plotADR and showTodayOnly  and today and afterStart and beforeEnd then closeDownTrendStart + c else Double.NaN;
plot oneADRMinus = if showCurrentTargetsOnly == yes and (bnumDown < Max(HighestAll(dn), HighestAll(up)))
                         then Double.NaN
                         else if (tradetype == tradetype.both or tradetype == tradetype.short) and DownTrend and plotADR and !showTodayOnly then closeDownTrendStart - c else if (tradetype == tradetype.both or tradetype == tradetype.short) and DownTrend and plotADR and showTodayOnly  and today and afterStart and beforeEnd then closeDownTrendStart - c else Double.NaN;
plot twoADRMinus = if showCurrentTargetsOnly == yes and (bnumDown < Max(HighestAll(dn), HighestAll(up)))
                         then Double.NaN
                         else if (tradetype == tradetype.both or tradetype == tradetype.short) and DownTrend and plotADR and !showTodayOnly then closeDownTrendStart - (c * 2) else if (tradetype == tradetype.both or tradetype == tradetype.short) and DownTrend and plotADR and showTodayOnly  and today and afterStart and beforeEnd then closeDownTrendStart - (c * 2) else Double.NaN;
plot threeADRMinus = if showCurrentTargetsOnly == yes and (bnumDown < Max(HighestAll(dn), HighestAll(up)))
                         then Double.NaN
                         else if (tradetype == tradetype.both or tradetype == tradetype.short) and DownTrend and plotADR and !showTodayOnly then closeDownTrendStart - (c * 3) else if (tradetype == tradetype.both or tradetype == tradetype.short) and DownTrend and plotADR and showTodayOnly  and today and afterStart and beforeEnd then closeDownTrendStart - (c * 3) else Double.NaN;
plot fourADRMinus = if showCurrentTargetsOnly == yes and (bnumDown < Max(HighestAll(dn), HighestAll(up)))
                         then Double.NaN
                         else if (tradetype == tradetype.both or tradetype == tradetype.short) and DownTrend and plotADR and !showTodayOnly and showExtraTargets then closeDownTrendStart - (c * 4) else if (tradetype == tradetype.both or tradetype == tradetype.short) and DownTrend and plotADR and showTodayOnly  and today and afterStart and beforeEnd  and showExtraTargets then closeDownTrendStart - (c * 4) else Double.NaN;
plot fiveADRMinus = if showCurrentTargetsOnly == yes and (bnumDown < Max(HighestAll(dn), HighestAll(up)))
                         then Double.NaN
                         else if (tradetype == tradetype.both or tradetype == tradetype.short) and DownTrend and plotADR and !showTodayOnly and showExtraTargets then closeDownTrendStart - (c * 5) else if (tradetype == tradetype.both or tradetype == tradetype.short) and DownTrend and plotADR and showTodayOnly  and today and afterStart and beforeEnd  and showExtraTargets then closeDownTrendStart - (c * 5) else Double.NaN;
plot sixADRMinus = if showCurrentTargetsOnly == yes and (bnumDown < Max(HighestAll(dn), HighestAll(up)))
                         then Double.NaN
                         else if (tradetype == tradetype.both or tradetype == tradetype.short) and DownTrend and plotADR and !showTodayOnly and showExtraTargets then closeDownTrendStart - (c * 6) else if (tradetype == tradetype.both or tradetype == tradetype.short) and DownTrend and plotADR and showTodayOnly  and today and afterStart and beforeEnd  and showExtraTargets then closeDownTrendStart - (c * 6) else Double.NaN;
plot sevenADRMinus = if showCurrentTargetsOnly == yes and (bnumDown < Max(HighestAll(dn), HighestAll(up)))
                         then Double.NaN
                         else if (tradetype == tradetype.both or tradetype == tradetype.short) and DownTrend and plotADR and !showTodayOnly and showExtraTargets and showExtraTargets789 then closeDownTrendStart - (c * 7) else if (tradetype == tradetype.both or tradetype == tradetype.short) and DownTrend and plotADR and showTodayOnly  and today and afterStart and beforeEnd  and showExtraTargets and showExtraTargets789 then closeDownTrendStart - (c * 7) else Double.NaN;
plot eightADRMinus = if showCurrentTargetsOnly == yes and (bnumDown < Max(HighestAll(dn), HighestAll(up)))
                         then Double.NaN
                         else if (tradetype == tradetype.both or tradetype == tradetype.short) and DownTrend and plotADR and !showTodayOnly and showExtraTargets and showExtraTargets789 then closeDownTrendStart - (c * 8) else if (tradetype == tradetype.both or tradetype == tradetype.short) and DownTrend and plotADR and showTodayOnly  and today and afterStart and beforeEnd  and showExtraTargets and showExtraTargets789 then closeDownTrendStart - (c * 8) else Double.NaN;
plot nineADRMinus = if showCurrentTargetsOnly == yes and (bnumDown < Max(HighestAll(dn), HighestAll(up)))
                         then Double.NaN
                         else if (tradetype == tradetype.both or tradetype == tradetype.short) and DownTrend and plotADR and !showTodayOnly and showExtraTargets and showExtraTargets789 then closeDownTrendStart - (c * 9) else if (tradetype == tradetype.both or tradetype == tradetype.short) and DownTrend and plotADR and showTodayOnly  and today and afterStart and beforeEnd  and showExtraTargets and showExtraTargets789 then closeDownTrendStart - (c * 9) else Double.NaN;

UpTrendStopLoss.SetDefaultColor(Color.LIGHT_RED);
oneADRPlus.SetDefaultColor(Color.LIGHT_GREEN);
twoADRPlus.SetDefaultColor(Color.LIGHT_GREEN);
threeADRPlus.SetDefaultColor(Color.LIGHT_GREEN);
fourADRPlus.SetDefaultColor(Color.LIGHT_GREEN);
fiveADRPlus.SetDefaultColor(Color.LIGHT_GREEN);
sixADRPlus.SetDefaultColor(Color.LIGHT_GREEN);
sevenADRPlus.SetDefaultColor(Color.LIGHT_GREEN);
eightADRPlus.SetDefaultColor(Color.LIGHT_GREEN);
nineADRPlus.SetDefaultColor(Color.LIGHT_GREEN);

DownTrendStopLoss.SetDefaultColor(Color.LIGHT_GREEN);
oneADRMinus.SetDefaultColor(Color.LIGHT_RED);
twoADRMinus.SetDefaultColor(Color.LIGHT_RED);
threeADRMinus.SetDefaultColor(Color.LIGHT_RED);
fourADRMinus.SetDefaultColor(Color.LIGHT_RED);
fiveADRMinus.SetDefaultColor(Color.LIGHT_RED);
sixADRMinus.SetDefaultColor(Color.LIGHT_RED);
sevenADRMinus.SetDefaultColor(Color.LIGHT_RED);
eightADRMinus.SetDefaultColor(Color.LIGHT_RED);
nineADRMinus.SetDefaultColor(Color.LIGHT_RED);


########### ADX Triangle Plot ###################################
plot ADXTriangleUp = if showCurrentTargetsOnly == yes and (bnumUp < Max(HighestAll(dn), HighestAll(up)))
                         then Double.NaN
                         else if showADXTriangle and UpTrend and ADX > ADX[1] and !showTodayOnly then closeUpTrendStart - (c * stopLossMultiplier) else if showADXTriangle and UpTrend and ADX > ADX[1] and showTodayOnly and today then closeUpTrendStart - (c * stopLossMultiplier)  else Double.NaN;
ADXTriangleUp.SetPaintingStrategy(PaintingStrategy.TRIANGLES);
ADXTriangleUp.SetDefaultColor(Color.WHITE);
ADXTriangleUp.AssignValueColor(if ADX > ADXR and ADX[1] < ADXR[1] then Color.RED else if ADX > 35 then Color.CYAN else Color.CURRENT);
ADXTriangleUp.SetLineWeight(1);
plot ADXBubbleDown = if showCurrentTargetsOnly == yes and (bnumUp < Max(HighestAll(dn), HighestAll(up)))
                         then Double.NaN
                         else if showADXTriangle and DownTrend and ADX > ADX[1] and !showTodayOnly then closeDownTrendStart + (c * stopLossMultiplier) else if showADXTriangle and DownTrend and ADX > ADX[1] and showTodayOnly and today then closeDownTrendStart + (c * stopLossMultiplier) else Double.NaN;
ADXBubbleDown.SetPaintingStrategy(PaintingStrategy.TRIANGLES);
ADXBubbleDown.SetDefaultColor(Color.MAGENTA);
ADXBubbleDown.AssignValueColor(if ADX > ADXR and ADX[1] < ADXR[1] then Color.GREEN else if ADX > 35 then Color.YELLOW else Color.CURRENT);
ADXBubbleDown.SetLineWeight(1);


#################################################################
############          ADR/ATR Zone Shading              #########
#################################################################
def u = if UpTrend then closeUpTrendStart else Double.NaN;
def d = if DownTrend then closeDownTrendStart else Double.NaN;
def bnumUpCheck = if bnumUp != 0 then 1 else Double.NaN;
def bnumDownCheck = if bnumDown != 0 then 1 else Double.NaN;

AddCloud(if showADRZones and UpTrend and bnumUpCheck and showExtraTargets and showExtraTargets789 then nineADRPlus else if showADRZones and UpTrend and bnumUpCheck and showExtraTargets then sixADRPlus else if showADRZones and UpTrend and bnumUpCheck then threeADRPlus else Double.NaN, if showADRZones and UpTrend and bnumUpCheck then u else Double.NaN , CreateColor(213, 252, 213));
AddCloud(if showADRZones and UpTrend then u else Double.NaN, if showADRZones and UpTrend then UpTrendStopLoss else Double.NaN , CreateColor(255, 174, 174));

# - Shade Downtrend ADR/ATR zones
AddCloud( if showADRZones and DownTrend and bnumDownCheck then d else Double.NaN ,if showADRZones and DownTrend and bnumDownCheck and showExtraTargets and showExtraTargets789 then nineADRminus else if showADRZones and DownTrend and bnumDownCheck and showExtraTargets then sixADRMinus else if showADRZones and DownTrend and bnumDownCheck then threeADRMinus else Double.NaN, CreateColor(213, 252, 213));

AddCloud(if showADRZones and DownTrend then DownTrendStopLoss else Double.NaN, if showADRZones and DownTrend then d else Double.NaN, CreateColor(255, 174, 174));


#################################################################
####    RSM shade areas based on criteria; adjust as needed  ####
#################################################################
AddCloud(if showRSMShade and RSI > 50 and SlowK >= 50 and Value > Avg then Double.POSITIVE_INFINITY else Double.NaN, if RSI > 50 and SlowK > 50 and Value > Avg then Double.NEGATIVE_INFINITY else Double.NaN, Color.LIGHT_GREEN);
AddCloud(if showRSMShade and RSI < 50 and SlowK < 50 and Value < Avg then Double.POSITIVE_INFINITY else Double.NaN, if RSI < 50 and SlowK < 50 and Value < Avg then Double.NEGATIVE_INFINITY else Double.NaN, Color.LIGHT_RED);


#################################################################
############   Labels disable/blockout as needed        #########
#################################################################
# - Trend Labels
AddLabel(showTrendLabels and (bnumDown != 0 or bnumUp != 0), "Trend BAR#: " + (if bnumUp > 0 then bnumUp else + bnumDown), if bnumUp > 0 then Color.GREEN else Color.RED);
AddLabel(showTrendLabels and (bnumDown != 0 or bnumUp != 0), "Trend @ $:" + (if bnumUp > 0 then closeUpTrendStart else  + closeDownTrendStart), if bnumUp > 0 then Color.GREEN else Color.RED);
AddLabel(showTrendLabels, "Tot Bars:" + (if bnumUp > 0 then UpTrendBarCount else DownTrendBarCount), if bnumUp > 0 then Color.GREEN else Color.RED);
AddLabel(showTrendLabels, "RSM:" + (if UpTrend == 1 then "L" else if DownTrend == 1 then "S" else "I"), if UpTrend == 1 then Color.GREEN else if DownTrend == 1 then Color.RED else Color.GRAY);

# - ADR/ATR Labels Targets
AddLabel(openPrice and showADRLabels, "Open:" + dailyO, Color.ORANGE);

AddLabel(showADRLabels and (UpTrend or DownTrend), "Target #1: " + (if UpTrend then Round(oneADRPlus, 2) else if DownTrend then Round(oneADRMinus, 2) else Double.NaN) + " ", if UpTrend then Color.GREEN else if DownTrend then Color.RED else Color.GRAY);
AddLabel(showADRLabels and (UpTrend or DownTrend), "Target #2: " + (if UpTrend then Round(twoADRPlus, 2) else if DownTrend then Round(twoADRMinus, 2) else Double.NaN) + " ", if UpTrend then Color.GREEN else if DownTrend then Color.RED else Color.GRAY);
AddLabel(showADRLabels and (UpTrend or DownTrend), "Target #3: " + (if UpTrend then Round(threeADRPlus, 2) else if DownTrend then Round(threeADRMinus, 2) else Double.NaN) + " ", if UpTrend then Color.GREEN else if DownTrend then Color.RED else Color.GRAY);

# - Indicator Label
AddLabel(if showIndicatorLabels then yes else no, "RSI:" + Round (RSI, 2) + " | sK:" + Round(SlowK, 2) + " | Macd:" + Round(Value, 4) + "  ", Color.ORANGE);




#### ALERTS Sound
Alert(audibleAlerts and upArrow, "RSM UpTrend Started", Alert.BAR, Sound.Ding);
Alert(audibleAlerts and downArrow, "RSM DownTrend Started", Alert.BAR, Sound.Ding);

RSM Lower

Update - Version 1.5 (Lower)

Added Stochastic Divergence Indicator (in addition to RSI)
Added labels for selected plot
Added RSI Drivergence indicator
1. Credit to @BenTen - https://usethinkscript.com/threads/rsi-divergence-indicator-with-scanner-for-thinkorswim.136/
2. Identifies Divergence for RSI only
3. Plotted by ORANGE Dots and Orange Dashed Line
4. Requested by - @bigshow3

Features

3 Indicators in 1
1. RSI - Only
2. Stochastic - Only
3. RSI & Stochastic
4. MACD - Only
Will shade lower area when trend is confirmed for each indicator individually
All settings for each indicator made avaiable in settings for user configuration
Paint Bars if not used with upper study - user configurable

Code:

#RSM_Lower_v1.5
#
#CHANGELOG
#
# 2021.07.06 V1.5 @SuryaKiranC - Updated code to use existing variables; added Stochastic Slow Divergence (in addition
#                           to RSI Divergence - added Labeles to show which plot is enabled; can be turned off
#
# 2021.07.06 V1.4 @cos251 - Added RSI Divergence indicator from "RSI Dirvergence Indicator" from BenTen code
#                           Please note that the overbought and oversold used for divergence is 70/30 and can be adjusted in
#                           settings
#
# 2021.01.11 V1.3 @cos251 - Addjusted lower shading to shade trends when individual indicator crosses respective midline
#                           Shading will match if stochPlots is set to "Both" (RSI & Stochastci)
#
# 2020.11.30 V1.2 @cos251 - Added quick option to select plot(s) (RSI, Stochastic, Both or MACDOnly), set SlowD to enabled,
#                           user can uncheck SlowD plot if desired; adjusted coloring and shading to work with
#                           any plot selected; Combined plots for ease of use.
#
# 2020.10.30 V1.1 @cos251 - Added UpTrend and DownTrend variables that can be used for a SCAN (HAS BEEN REMOVED)
# 2020.10.27 V1.0 @cos251 - Added RSI, StochasticSlow and MACD to same indicator; this
#                           will plot only RSI and Stochastic but also
#                         - calculates MACD; Will shade the lower plot area of the following conditions are met
#                           Shade GREEN = RSI > 50 and SlowK > 50 and (macd)Value > (macd)Avg
#                           Shade RED = RSI < 50 and SlowK < 50 and (macd)Value < (macd)Avg
#                 
#REQUIREMENTS - RSI Set to 7, EXPONENTIAL
#               Stoch Slow 14 and 3 WILDERS
#               MACD 12,26,9 WEIGHTED
#
#
#CREDITS
# requesed by "@Joseph Patrick 18"
#
#LINK
# https://rockwell-files.s3.amazonaws.com/PXCompanionGuide2ndEd_cover.pdf
# Markus Heikoetter who is the author of the Power X Strategy
# https://usethinkscript.com/threads/mimicking-power-x-strategy-by-markus-heitkoetter.4283/
#
#USAGE
#



declare lower;

input paintBars = yes;
input selectPlots = { default "RSI", "Stochastic", "Both", "MACDOnly" };

################################################################
##########                 RSI                         #########
################################################################

input lengthRSI = 7;
input over_BoughtRSI = 80;
input over_SoldRSI = 20;
input price = close;
input averageTypeRSI = AverageType.EXPONENTIAL;
input showBreakoutSignalsRSI = no;
input showRSI_obos = no;


def NetChgAvg = MovingAverage(averageTypeRSI, price - price[1], lengthRSI);
def TotChgAvg = MovingAverage(averageTypeRSI, AbsValue(price - price[1]), lengthRSI);
def ChgRatio = if TotChgAvg != 0 then NetChgAvg / TotChgAvg else 0;
def calcRSI = 50 * (ChgRatio + 1);

plot RSI = if selectPlots == selectPlots.RSI or selectPlots == selectPlots.Both then calcRSI else Double.NaN;
plot OverSold_RSI = if (selectPlots == selectPlots.RSI or selectPlots == selectPlots.Both) and showRSI_obos then over_SoldRSI else Double.NaN;
plot OverBought_RSI = if (selectPlots == selectPlots.RSI or selectPlots == selectPlots.Both) and showRSI_obos then over_BoughtRSI else Double.NaN;
plot UpSignalRSI = if RSI crosses above OverSold_RSI then OverSold_RSI else Double.NaN;
plot DownSignalRSI = if RSI crosses below OverBought_RSI then OverBought_RSI else Double.NaN;
UpSignalRSI.SetHiding(!showBreakoutSignalsRSI);
DownSignalRSI.SetHiding(!showBreakoutSignalsRSI);
RSI.DefineColor("OverBought", GetColor(5));
RSI.DefineColor("Normal", Color.YELLOW);
RSI.DefineColor("OverSold", GetColor(1));
#RSI.AssignValueColor(if RSI > rsiover_Bought then RSI.Color("OverBought") else if RSI < rsiover_Sold then RSI.Color("OverSold") else RSI.Color("Normal"));
OverSold_RSI.SetDefaultColor(GetColor(8));
OverBought_RSI.SetDefaultColor(GetColor(8));
UpSignalRSI.SetDefaultColor(Color.UPTICK);
UpSignalRSI.SetPaintingStrategy(PaintingStrategy.ARROW_UP);
DownSignalRSI.SetDefaultColor(Color.DOWNTICK);
DownSignalRSI.SetPaintingStrategy(PaintingStrategy.ARROW_DOWN);

def BN = barNumber();
def RSI_H = if RSI > over_BoughtRSI then fold Ri = 1 to Floor(lengthRSI / 2) with Rp = 1 while Rp do RSI > GetValue(RSI, -Ri) else 0;
def RSI_PivotH = if (BN > lengthRSI and RSI == Highest(RSI, Floor(lengthRSI / 2)) and RSI_H) then RSI else Double.NaN;
def RSI_L = if RSI < over_SoldRSI then fold Rj = 1 to Floor(lengthRSI / 2) with Rq = 1 while Rq do RSI < GetValue(RSI, -Rj) else 0;
def RSI_PivotL = if (BN > lengthRSI and RSI == Lowest(RSI, Floor(lengthRSI / 2)) and RSI_L) then RSI else Double.NaN;
def RSI_PHBar = if !IsNaN(RSI_PivotH) then BN else RSI_PHBar[1];
def RSI_PLBar = if !IsNaN(RSI_PivotL) then BN else RSI_PLBar[1];
def RSI_PHPoint = if !IsNaN(RSI_PivotH) then RSI_PivotH else RSI_PHPoint[1];
def RSI_LastPHBar = if RSI_PHPoint != RSI_PHPoint[1] then RSI_PHBar[1] else RSI_LastPHBar[1];
def RSI_PLPoint = if !IsNaN(RSI_PivotL) then RSI_PivotL else RSI_PLPoint[1];
def RSI_LastPLBar = if RSI_PLPoint != RSI_PLPoint[1] then RSI_PLBar[1] else RSI_LastPLBar[1];

def RSI_HighPivots = BN >= HighestAll(RSI_LastPHBar);
def RSI_LowPivots = BN >= HighestAll(RSI_LastPLBar);
def RSI_pivotHigh = if RSI_HighPivots then RSI_PivotH else Double.NaN;

plot RSI_plotHline = if selectPlots == selectPlots.RSI then RSI_pivotHigh else Double.NaN;
RSI_plotHline.EnableApproximation();
RSI_plotHline.SetDefaultColor(Color.LIME);
RSI_plotHline.SetStyle(Curve.SHORT_DASH);

plot RSI_pivotLow = if selectPlots == selectPlots.RSI and RSI_LowPivots then RSI_PivotL else Double.NaN;
RSI_pivotLow.EnableApproximation();
RSI_pivotLow.SetDefaultColor(Color.LIME);
RSI_pivotLow.SetStyle(Curve.SHORT_DASH);

plot RSI_pivotDot = if !IsNaN(selectPlots == selectPlots.RSI and RSI_pivotHigh) then RSI_pivotHigh else if !IsNaN(RSI_pivotLow) then RSI_pivotLow else Double.NaN;
RSI_pivotDot.SetDefaultColor(Color.LIME);
RSI_pivotDot.SetPaintingStrategy(PaintingStrategy.POINTS);
RSI_pivotDot.SetLineWeight(3);


################################################################
##########                 Stochastic Slow             #########
################################################################
input over_boughtSt = 80;
input over_soldSt = 20;
input KPeriod = 14;
input DPeriod = 3;
input priceH = high;
input priceL = low;
input priceC = close;
input averageTypeStoch = AverageType.WILDERS;
input showBreakoutSignalsStoch = {default "No", "On SlowK", "On SlowD", "On SlowK & SlowD"};
input showStochastic_ob_os = no;

def calcSlowK = reference StochasticFull(over_boughtSt, over_soldSt, KPeriod, DPeriod, priceH, priceL, priceC, 3, averageTypeStoch).FullK;
def calcSlowD = reference StochasticFull(over_boughtSt, over_soldSt, KPeriod, DPeriod, priceH, priceL, priceC, 3, averageTypeStoch).FullD;
plot SlowK = if selectPlots == selectPlots.Stochastic or selectPlots == selectPlots.Both then calcSlowK else Double.NaN;
plot SlowD = if selectPlots == selectPlots.Stochastic or selectPlots == selectPlots.Both then calcSlowD else Double.NaN;
plot OverBoughtSt = if (selectPlots == selectPlots.Stochastic or selectPlots == selectPlots.Both) and showStochastic_ob_os then over_boughtSt else Double.NaN;
plot OverSoldSt = if (selectPlots == selectPlots.Stochastic or selectPlots == selectPlots.Both) and showStochastic_ob_os then over_soldSt else Double.NaN;

def upK = SlowK crosses above OverSoldSt;
def upD = SlowD crosses above OverSoldSt;
def downK = SlowK crosses below OverBoughtSt;
def downD = SlowD crosses below OverBoughtSt;

plot UpSignalSt;
plot DownSignalSt;
switch (showBreakoutSignalsStoch) {
case "No":
    UpSignalSt = Double.NaN;
    DownSignalSt = Double.NaN;
case "On SlowK":
    UpSignalSt = if upK then OverSoldSt else Double.NaN;
    DownSignalSt = if downK then OverBoughtSt else Double.NaN;
case "On SlowD":
    UpSignalSt = if upD then OverSoldSt else Double.NaN;
    DownSignalSt = if downD then OverBoughtSt else Double.NaN;
case "On SlowK & SlowD":
    UpSignalSt = if upK or upD then OverSoldSt else Double.NaN;
    DownSignalSt = if downK or downD then OverBoughtSt else Double.NaN;
}
UpSignalSt.SetHiding(showBreakoutSignalsStoch == showBreakoutSignalsStoch."No");
DownSignalSt.SetHiding(showBreakoutSignalsStoch == showBreakoutSignalsStoch."No");
SlowK.SetDefaultColor(Color.WHITE);
SlowD.SetDefaultColor(Color.DARK_ORANGE);
OverBoughtSt.SetDefaultColor(GetColor(1));
OverSoldSt.SetDefaultColor(GetColor(1));
UpSignalSt.SetDefaultColor(Color.UPTICK);
UpSignalSt.SetPaintingStrategy(PaintingStrategy.ARROW_UP);
DownSignalSt.SetDefaultColor(Color.DOWNTICK);
DownSignalSt.SetPaintingStrategy(PaintingStrategy.ARROW_DOWN);

def SlowK_H = if SlowK > over_boughtSt then fold Si = 1 to Floor(KPeriod / 2) with Sp = 1 while Sp do SlowK > getValue(SlowK, -Si) else 0;
def SlowK_PivotH = if (BN > KPeriod and SlowK == highest(SlowK, Floor(KPeriod/2)) and SlowK_H) then SlowK else double.NaN;
def SlowK_L = if SlowK < over_soldSt then fold Sj = 1 to Floor(KPeriod / 2) with Sq = 1 while Sq do SlowK < getValue(SlowK, -Sj) else 0;
def SlowK_PivotL = if (BN > KPeriod and SlowK == lowest(SlowK, Floor(KPeriod/2)) and SlowK_L) then SlowK else double.NaN;
def SlowK_PHBar = if !isNaN(SlowK_PivotH) then BN else SlowK_PHBar[1];
def SlowK_PLBar = if !isNaN(SlowK_PivotL) then BN else SlowK_PLBar[1];
def SlowK_PHPoint = if !isNaN(SlowK_PivotH) then SlowK_PivotH else SlowK_PHPoint[1];
def SlowK_LastPHBar = if SlowK_PHPoint != SlowK_PHPoint[1] then SlowK_PHBar[1] else SlowK_LastPHBar[1];
def SlowK_PLPoint = if !isNaN(SlowK_PivotL) then SlowK_PivotL else SlowK_PLPoint[1];
def SlowK_LastPLBar = if SlowK_PLPoint != SlowK_PLPoint[1] then SlowK_PLBar[1] else SlowK_LastPLBar[1];

def SlowK_HighPivots = BN >= highestAll(SlowK_LastPHBar);
def SlowK_LowPivots = BN >= highestAll(SlowK_LastPLBar);
def SlowK_PivotHigh = if SlowK_HighPivots then SlowK_PivotH else double.NaN;

plot SlowK_plotHline = SlowK_PivotHigh;
     SlowK_plotHline.enableApproximation();
     SlowK_plotHline.SetDefaultColor(Color.LIME);
     SlowK_plotHline.SetStyle(Curve.Short_DASH);

plot SlowK_pivotLow = if SlowK_LowPivots then SlowK_PivotL else double.NaN;
     SlowK_pivotLow.enableApproximation();
     SlowK_pivotLow.SetDefaultColor(Color.LIME);
     SlowK_pivotLow.SetStyle(Curve.Short_DASH);

plot SlowK_pivotDot = if !isNaN(SlowK_pivotHigh) then SlowK_pivotHigh else if !isNaN(SlowK_pivotLow) then SlowK_pivotLow else double.NaN;
     SlowK_pivotDot.SetDefaultColor(Color.LIME);
     SlowK_pivotDot.SetPaintingStrategy(PaintingStrategy.POINTS);
     SlowK_pivotDot.SetLineWeight(3);


################################################################
##########                 MACD                        #########
################################################################
input fastLength = 12;
input slowLength = 26;
input MACDLength = 9;
input averageTypeMACD = AverageType.WEIGHTED;
input showBreakoutSignalsMACD = no;
def calcValue = MovingAverage(averageTypeMACD, close, fastLength) - MovingAverage(averageTypeMACD, close, slowLength);
def calcAvg = MovingAverage(averageTypeMACD, calcValue, MACDLength);
def calcDiff = calcValue - calcAvg;
plot ZeroLine = if selectPlots == selectPlots.MACDOnly then 0 else Double.NaN;
plot Value = if selectPlots == selectPlots.MACDOnly then calcValue else Double.NaN;
plot Avg = if selectPlots == selectPlots.MACDOnly then calcAvg else Double.NaN;
plot Diff = if selectPlots == selectPlots.MACDOnly then calcDiff else Double.NaN;
plot UpSignalMACD = if calcDiff crosses above 0 then 0 else Double.NaN;
plot DownSignalMACD = if calcDiff crosses below 0 then 0 else Double.NaN;

UpSignalMACD.SetHiding(!showBreakoutSignalsMACD);
DownSignalMACD.SetHiding(!showBreakoutSignalsMACD);

Value.SetDefaultColor(Color.GREEN);
Avg.SetDefaultColor(Color.RED);
Diff.SetDefaultColor(GetColor(5));
Diff.SetPaintingStrategy(PaintingStrategy.HISTOGRAM);
Diff.SetLineWeight(4);
Diff.DefineColor("Positive and Up", Color.CYAN);
Diff.DefineColor("Positive and Down", Color.BLUE);
Diff.DefineColor("Negative and Down", Color.RED);
Diff.DefineColor("Negative and Up", Color.YELLOW);
Diff.AssignValueColor(if Diff >= 0 then if Diff > Diff[1] then Diff.Color("Positive and Up") else Diff.Color("Positive and Down") else if Diff < Diff[1] then Diff.Color("Negative and Down") else Diff.Color("Negative and Up"));
ZeroLine.SetDefaultColor(GetColor(0));
UpSignalMACD.SetDefaultColor(Color.UPTICK);
UpSignalMACD.SetPaintingStrategy(PaintingStrategy.ARROW_UP);
DownSignalMACD.SetDefaultColor(Color.DOWNTICK);
DownSignalMACD.SetPaintingStrategy(PaintingStrategy.ARROW_DOWN);


# Check Each Signal for over 50 and MACD for Value > Avg
def rsiGreen = if calcRSI > 50 then 1 else Double.NaN;
def rsiRed = if calcRSI < 50 then 1 else Double.NaN;
def stochGreen = if calcSlowK >= 50 then 1 else Double.NaN;
def stochRed = if calcSlowK < 50 then 1 else Double.NaN;
def macdGreen = if calcValue > calcAvg then 1 else Double.NaN;
def macdRed = if calcValue < calcAvg then 1 else Double.NaN;
def green = if rsiGreen and stochGreen and macdGreen then 1 else Double.NaN;
def red = if rsiRed and stochRed and macdRed then 1 else Double.NaN;


#RSI Color Assignment per requeset
RSI.AssignValueColor(if calcRSI > 50 and calcSlowK > 50 and calcValue > calcAvg then Color.GREEN else if calcRSI < 50 and calcSlowK < 50 and calcValue < calcAvg then Color.RED else Color.DARK_GRAY);

#AssignPriceColor
AssignPriceColor(if paintBars and calcRSI > 50 and calcSlowK > 50 and calcValue > calcAvg then Color.GREEN else if paintBars and calcRSI < 50 and calcSlowK < 50 and calcValue < calcAvg then Color.RED else if paintBars then Color.DARK_GRAY else Color.CURRENT);

#################################################################
############  Shade areas based on criteria; adjust as needed  ##
#################################################################
AddCloud(if rsiGreen and stochGreen and selectPlots == selectPlots.Both then Double.POSITIVE_INFINITY else Double.NaN, if rsiGreen and stochGreen and selectPlots == selectPlots.Both then Double.NEGATIVE_INFINITY else Double.NaN, Color.LIGHT_GREEN);


AddCloud(if rsiRed and stochRed and selectPlots == selectPlots.Both then Double.POSITIVE_INFINITY else Double.NaN, if rsiRed and stochRed and selectPlots == selectPlots.Both then Double.NEGATIVE_INFINITY else Double.NaN, Color.LIGHT_RED);

AddCloud(if rsiGreen and selectPlots == selectPlots.RSI then Double.POSITIVE_INFINITY else Double.NaN, if rsiGreen and selectPlots == selectPlots.RSI then Double.NEGATIVE_INFINITY else Double.NaN, Color.LIGHT_GREEN);
AddCloud(if rsiRed and selectPlots == selectPlots.RSI then Double.POSITIVE_INFINITY else Double.NaN, if rsiRed and selectPlots == selectPlots.RSI then Double.NEGATIVE_INFINITY else Double.NaN, Color.LIGHT_RED);

AddCloud(if stochGreen and selectPlots == selectPlots.Stochastic then Double.POSITIVE_INFINITY else Double.NaN, if stochGreen and selectPlots == selectPlots.Stochastic then Double.NEGATIVE_INFINITY else Double.NaN, Color.LIGHT_GREEN);
AddCloud(if stochRed and selectPlots == selectPlots.Stochastic then Double.POSITIVE_INFINITY else Double.NaN, if stochRed and selectPlots == selectPlots.Stochastic then Double.NEGATIVE_INFINITY else Double.NaN, Color.LIGHT_RED);

AddCloud(if macdGreen and selectPlots == selectPlots.MACDOnly then Double.POSITIVE_INFINITY else Double.NaN, if macdGreen and selectPlots == selectPlots.MACDOnly then Double.NEGATIVE_INFINITY else Double.NaN, Color.LIGHT_GREEN);
AddCloud(if macdRed and selectPlots == selectPlots.MACDOnly then Double.POSITIVE_INFINITY else Double.NaN, if macdRed and selectPlots == selectPlots.MACDOnly then Double.NEGATIVE_INFINITY else Double.NaN, Color.LIGHT_RED);


plot fifty = if selectPlots == selectPlots.RSI or selectPlots == selectPlots.Stochastic or selectPlots == selectPlots.Both then 50 else Double.NaN;
fifty.SetDefaultColor(Color.RED);



input showLabels = yes;
AddLabel(if showLabels then yes else no,if selectPlots == selectPlots.RSI then "RSM: RSI PLOT" else if selectPlots == selectPlots.Stochastic then "RSM: Stochastic Plot" else if selectPlots == selectPlots.Both then "RSM: RSI & Stochastic Plot" else "RSM: MACD PLOT", Color.ORANGE);

RSM MTF (Labels)

Features

Provides chart labels (upper left corner of price chart) with current status of MTF RSM Trend for the following TF's
1. 1m, 2m, 3m, 4m, 5m, 10m, 15m, 20m, 30m, 1h, 2h, 4h, 1d, 2d, 3d, 4d, 1wk, 1mnth
2. Add indicator for each time frame you would like shown

Code:

#START OF RSI/Stochastic/MACD Confluence Strategy for ThinkOrSwim
# RSM_MTF_Labels
#
#CHANGELOG
# 2020.12.30 V2.1 @SuryaKiranC - Fork from @cos251 Version, to reduce the number of lines in code and optimize for performance.
#
# 2020.12.11 V1.1 @cos251 - Added 2D, 3D, 4D, 1WK, 1MNTH Agg Period Labels
#
# 2020.12.02 V1.0 @cos251 - Added RSM signal calculation for following timeframes:
#                         - 1m, 2m, 5m, 15m, 30m, 1h, 2h, 4h, D
#                         - Label will be added to top of chart for every allowed TF
#                         - Label will read "TF:L(Long):S(Short):I(Idle)"
#                         - Label Color will be green, red or gray accordingly
#
#
#REQUIREMENTS - RSI Set to 7, EXPONENTIAL
#               Stoch Slow 14 and 3 WILDERS
#               MACD 12,26,9 WEIGHTED
#
#ORIGINAL REQUEST - @Joseph Patrick 18
#                 - Link: https://usethinkscript.com/threads/mimicking-power-x-strategy-by-markus-heitkoetter.4283/
#
#

input period = AggregationPeriod.DAY;

DefineGlobalColor("UpTrend", Color.Green);
DefineGlobalColor("DownTrend", Color.RED);
DefineGlobalColor("NoTrend", Color.GRAY);

script RSM_ {

    input aP = AggregationPeriod.DAY;
    # RSI
    def lengthRSI = 7;
    def averageTypeRSI = AverageType.EXPONENTIAL;
    # Stochastic
    def over_boughtSt = 80;
    def over_soldSt = 20;
    def KPeriod = 14;
    def DPeriod = 3;
    input averageTypeStoch = AverageType.WILDERS;
    # MACD
    def fastLength = 12;
    def slowLength = 26;
    def MACDLength = 9;
    def averageTypeMACD = AverageType.WEIGHTED;

    ###############################################################
    ##########                 RSI                         #########
    ################################################################

    def NetChgAvg = MovingAverage(averageTypeRSI, close(period = aP) - close(period = aP)[1], lengthRSI);
    def TotChgAvg = MovingAverage(averageTypeRSI, AbsValue(close(period = aP) - close(period = aP)[1]), lengthRSI);
    def ChgRatio = if TotChgAvg != 0 then NetChgAvg / TotChgAvg else 0;
    def RSI_ = 50 * (ChgRatio + 1);

    ################################################################
    ##########                 Stochastic Slow             #########
    ################################################################

    def SlowK_ = reference StochasticFull(over_boughtSt,  over_soldSt,  KPeriod,  DPeriod,  high(period = aP),  low(period = aP),  close(period = aP),  3, if (averageTypeStoch == 1) then AverageType.SIMPLE else AverageType.EXPONENTIAL).FullK;
    def SlowD_ = reference StochasticFull(over_boughtSt,  over_soldSt,  KPeriod,  DPeriod,  high(period = aP),  low(period = aP),  close(period = aP),  3, if (averageTypeStoch == 1) then AverageType.SIMPLE else AverageType.EXPONENTIAL).FullD;

    ################################################################
    ##########                 MACD                      ###########
    ################################################################

    def Value_ = MovingAverage(averageTypeMACD, close(period = aP), fastLength) - MovingAverage(averageTypeMACD, close(period = aP), slowLength);
    def Avg_ = MovingAverage(averageTypeMACD, Value_, MACDLength);
    def Diff_ = Value_ - Avg_;

    #################################################################
    ##########          Trend  & Labels                   #########
    #################################################################
    def UpTrend_ = if RSI_ >= 50 and SlowK_ >= 50 and Value_ > Avg_ then 1 else 0;
    def DownTrend_ = if RSI_ < 50 and SlowK_ < 50 and Value_ < Avg_ then 1 else 0;
    plot Trend_ = if UpTrend_ then 1 else if DownTrend_ then 0 else -1;

}

def currentPeriod = GetAggregationPeriod();
def RSM;

if period >= currentPeriod {
    RSM = RSM_(aP = period);

} else {
    RSM = Double.NaN;

}

AddLabel(!IsNaN(RSM), if period == AggregationPeriod.MONTH then "M"
else if period == AggregationPeriod.WEEK then "W"
else if period == AggregationPeriod.FOUR_DAYS then "4D"
else if period == AggregationPeriod.THREE_DAYS then "3D"
else if period == AggregationPeriod.TWO_DAYS then "2D"
else if period == AggregationPeriod.DAY then "D"
else if period == AggregationPeriod.FOUR_HOURS then "4H"
else if period == AggregationPeriod.TWO_HOURS then "2H"
else if period == AggregationPeriod.HOUR then "60m"
else if period == AggregationPeriod.THIRTY_MIN then "30m"
else if period == AggregationPeriod.TWENTY_MIN then "20m"
else if period == AggregationPeriod.FIFTEEN_MIN then "15m"
else if period == AggregationPeriod.TEN_MIN then "10m"
else if period == AggregationPeriod.FIVE_MIN then "5m"
else if period == AggregationPeriod.FOUR_MIN then "4m"
else if period == AggregationPeriod.THREE_MIN then "3m"
else if period == AggregationPeriod.TWO_MIN then "2m"
else if period == AggregationPeriod.MIN then "1m"
else "", if RSM == 1 then GlobalColor("UpTrend") else if RSM == 0 then GlobalColor("DownTrend") else GlobalColor("NoTrend"));

RSM SCAN

Scanner Setup Instructions:
1. Click Create (Create New Study)
2. Remove the default plot statement and past the code block from RSM_SCAN.
3. Save the study with name "RSM_SCAN", make sure it is not loaded in your studies on the right, if it is loaded by default when you saved it, please remove we don't need this on chart study.
4. Go to Scan, Remove all the filters and add a new filter, select "Study" as a filter, Default study selected will be "ADXCrossOver", Click on Pencil Icon next to Default TimeFrame "D" and click "ThinkScript Editor".
5. Here you can past one of the scan query RSM_SCAN().UpTrendJustStarted or RSM_SCAN().DownTrendJustStarted.
6. You can even limit the scan results, select a default narrowed down list as "S&P 500" under "Scan In, on the scan tab itself.
7. Finally you can save the scan query with a name.
8. Repeat Step 4 to 7, for other scan queries.
The following scan queries are available
1. RSM_Scan().UpTrend (UpTrend in Progress, in the selected timeframe for Scan)
2. RSM_Scan().UpTrendJustStarted (Uptrend Just started, in the selected timeframe for Scan)
3. RSM_Scan().DownTrend (DownTrend in Progress, in the selected timeframe for Scan)
4. RSM_Scan().DownTrendJustStarted (DownTrend Just started, in the selected timeframe for Scan)
5. RSM_Scan().UpTrendJustEnded (UpTrend finished, in the selected timeframe for Scan)
6. RSM_Scan().DownTrendJustEnded (DownTrend finished, in the selected timeframe for Scan)
As always, please match the chart timeframe to your Scanner Settings for review.

Code:

#START OF RSI/Stochastic/MACD Confluence combo for ThinkOrSwim
#
# RSM_SCAN
#
#CHANGELOG
# 2020.12.05 - V1.0 @cos251 - RSM SCANS study - to be used to scan for following conditions:
#            - Stocks currently in UpTrend
#            - Stocks currently in DownTrend
#            - Stocks where UpTrendJustSarted - first bar of UpTrend for scanend TF
#            - Stocks where DownTrendJustStarted - first bar of DownTrend for scanned TF
#            - Stocks where UpTredJustEnded - first NO Trend bar after UpTrend
#            - Stocks where DownTrendJustEnded - first NO Trend bar after DownTrend
#            - Recommend using default studies for SCANS of RSI, Stochastics or MACD for efficiency
# 
#REQUIREMENTS - RSI Set to 7, EXPONENTIAL
#               Stoch Slow 14 and 3 WILDERS
#               MACD 12,26,9 WEIGHTED
#
#
#CREDITS
# requesed by "@Joseph Patrick 18"
#
#LINK
# https://rockwell-files.s3.amazonaws.com/PXCompanionGuide2ndEd_cover.pdf
# Markus Heikoetter who is the author of the Power X Strategy
# https://usethinkscript.com/threads/mimicking-power-x-strategy-by-markus-heitkoetter.4283/
#
#USAGE
#
declare lower;

plot fiftyLine = 50;
################################################################
##########                 RSI                         #########
################################################################

input lengthRSI = 7;
input over_BoughtRSI = 80;
input over_SoldRSI = 20;
input price = close;
input averageTypeRSI = AverageType.EXPONENTIAL;
def NetChgAvg = MovingAverage(averageTypeRSI, price - price[1], lengthRSI);
def TotChgAvg = MovingAverage(averageTypeRSI, AbsValue(price - price[1]), lengthRSI);
def ChgRatio = if TotChgAvg != 0 then NetChgAvg / TotChgAvg else 0;
def RSI = 50 * (ChgRatio + 1);


################################################################
##########                 Stochastic Slow             #########
################################################################
input over_boughtSt = 80;
input over_soldSt = 20;
input KPeriod = 14;
input DPeriod = 3;
input priceH = high;
input priceL = low;
input priceC = close;
input averageTypeStoch = AverageType.WILDERS;
def SlowK = reference StochasticFull(over_boughtSt, over_soldSt, KPeriod, DPeriod, priceH, priceL, priceC, 3, averageTypeStoch).FullK;
def SlowD = reference StochasticFull(over_boughtSt, over_soldSt, KPeriod, DPeriod, priceH, priceL, priceC, 3, averageTypeStoch).FullD;


#################################################################
############           MACD Calculation                 #########
#################################################################
input fastLength = 12;
input slowLength = 26;
input MACDLength = 9;
input averageTypeMACD = AverageType.WEIGHTED;
def Value = MovingAverage(averageTypeMACD, close, fastLength) - MovingAverage(averageTypeMACD, close, slowLength);
def Avg = MovingAverage(averageTypeMACD, Value, MACDLength);
def Diff = Value - Avg;


#################################################################
############          SCAN Variables                    #########
#################################################################

# If you want to scan for stocks that are not in either trend you can add two filters and scan for false for both conditions

# The UpTrend and DownTrend plots can be used to scan for stocks that are currently in that trend
plot UpTrend = if RSI > 50 and SlowK > 50 and Value > Avg then 1 else Double.NaN;
plot DownTrend = if RSI < 50 and SlowK < 50 and Value < Avg then 1 else Double.NaN;
UpTrend.Hide();
DownTrend.Hide();

# The UpTrendJustStarted and DownTrendJustStarted plots can be used to find stocks that have just started
# a trend in either direction
def UpTrendJustStartedBool = if RSI > 50 and SlowK > 50 and Value > Avg then 1 else 0;
def DownTrendJustStartedBool = if RSI < 50 and SlowK < 50 and Value < Avg then 1 else 0;
plot UpTrendJustStarted = if UpTrendJustStartedBool == 1 and UpTrendJustStartedBool[1] == 0 then 1 else Double.NaN;
plot DownTrendJustStarted = if DownTrendJustStartedBool == 1 and DownTrendJustStartedBool[1] == 0 then 1 else Double.NaN;
UpTrendJustStarted.Hide();
DownTrendJustStarted.Hide();
plot UpTrendJustEnded= if UpTrendJustStartedBool[1] == 1 and UpTrendJustStartedBool == 0 then 1 else Double.NaN;
plot DownTrendJustEnded= if DownTrendJustStartedBool[1] == 1 and DownTrendJustStartedBool == 0 then 1 else Double.NaN;
UpTrendJustEnded.Hide();
DownTrendJustEnded.Hide();

STRATEGY

Below is code for a basic start to a strategy. Please use as you wish.
The orders are set to only open and close during RTH. Please adjust for what you may be looking for. Thanks.

Code:

#START OF RSI/Stochastic/MACD Confluence Strategy for ThinkOrSwim
# RSM Strategy - BASIC
#CHANGELOG
# 2020.10.27 V1.0 @cos251 - Added RSI, StochasticSlow and MACD to same indicator
#             - also calculates MACD;
#               Will shade the lower plot area of the following conditions are met
#                    Shade GREEN = RSI > 50 and SlowK > 50 and (macd)Value > (macd)Avg
#                    Shade RED = RSI < 50 and SlowK < 50 and (macd)Value < (macd)Avg
#       
#REQUIREMENTS - RSI Set to 7, EXPONENTIAL
#               Stoch Slow 14 and 3 WILDERS
#               MACD 12,26,9 WEIGHTED

declare upper;


################################################################
##########            AddOrder Prep                    #########
################################################################
def bar = BarNumber();
def CloseAllCondition = SecondstillTime(1558) == 0;
def EOD = if SecondsTillTime(1558) == 0 and SecondsFromTime(1558) == 0 then 1 else 0;
def NotActive = if SecondsFromTime(1550) > 0 then 1 else 0;
def Active1 = if SecondsFromTime(0930) > 0 then 1 else 0;
def notrades = if SecondstillTime(1500) > 0 then 1 else 0;


################################################################
##########                 RSI                         #########
################################################################
input paintBars = yes;
input showShade = no;
input tradetype = { default "long", "short", "both" };
input lengthRSI = 7;
input price = close;
input averageTypeRSI = AverageType.EXPONENTIAL;
def NetChgAvg = MovingAverage(averageTypeRSI, price - price[1], lengthRSI);
def TotChgAvg = MovingAverage(averageTypeRSI, AbsValue(price - price[1]), lengthRSI);
def ChgRatio = if TotChgAvg != 0 then NetChgAvg / TotChgAvg else 0;
def RSI = 50 * (ChgRatio + 1);


################################################################
##########                 Stochastic Slow             #########
################################################################
input over_boughtSt = 80;
input over_soldSt = 20;
input KPeriod = 14;
input DPeriod = 3;
input priceH = high;
input priceL = low;
input priceC = close;
input averageTypeStoch = AverageType.WILDERS;
def SlowK = reference StochasticFull(over_boughtSt, over_soldSt, KPeriod, DPeriod, priceH, priceL, priceC, 3, averageTypeStoch).FullK;
def SlowD = reference StochasticFull(over_boughtSt, over_soldSt, KPeriod, DPeriod, priceH, priceL, priceC, 3, averageTypeStoch).FullD;



#################################################################
#MACD Calculation
input fastLength = 12;
input slowLength = 26;
input MACDLength = 9;
input averageTypeMACD = AverageType.WEIGHTED;
def Value = MovingAverage(averageTypeMACD, close, fastLength) - MovingAverage(averageTypeMACD, close, slowLength);
def Avg = MovingAverage(averageTypeMACD, Value, MACDLength);
def Diff = Value - Avg;


#AssignPriceColor
AssignPriceColor(if paintBars and RSI >= 50 and SlowK >= 50 and Value > Avg then Color.GREEN else if paintBars and RSI < 50 and SlowK < 50 and Value < Avg then Color.RED else if paintBars then Color.DARK_GRAY else Color.CURRENT);

#################################################################
############  Shade areas based on criteria; adjust as needed  ##
#################################################################
AddCloud(if showShade and RSI >= 50 and SlowK >= 50 and Value > Avg then Double.POSITIVE_INFINITY else Double.NaN, if RSI >= 50 and SlowK >= 50 and Value > Avg then Double.NEGATIVE_INFINITY else Double.NaN, Color.LIGHT_Green);
AddCloud(if showShade and RSI < 50 and SlowK < 50 and Value < Avg then Double.POSITIVE_INFINITY else Double.NaN, if RSI < 50 and SlowK < 50 and Value < Avg then Double.NEGATIVE_INFINITY else Double.NaN, Color.LIGHT_RED);



#################################################################
############          SCAN Variables                    #########
#################################################################
plot UpTrend = if RSI >= 50 and SlowK >= 50 and Value > Avg then 1 else 0;
plot DownTrend = if RSI < 50 and SlowK < 50 and Value < Avg then 1 else 0;
def LongBuy = if UpTrend == 1 and UpTrend[1] == 0 then 1 else 0;
def LongExit = if UpTrend[1] == 1 and UpTrend == 0 then 1 else 0;
def ShortSell = if DownTrend == 1 and DownTrend[1] == 0 then 1 else 0;
def ShortExit = if DownTrend == 0 and DownTrend[1] == 1 then 1 else 0;
UpTrend.Hide();
DownTrend.Hide();
AddLabel(yes, if UpTrend == 1 then "::RSM-Signal:LONG" else if DownTrend == 1 then "::RSM-Signal:SHORT" else "::RSM-Signal:IDLE", if UpTrend == 1 then Color.GREEN else if DownTrend == 1 then Color.RED else Color.GRAY);

plot upArrow = if UpTrend == 1 and UpTrend[1] == 0 then low else Double.NaN;
upArrow.SetPaintingStrategy(PaintingStrategy.ARROW_UP);
upArrow.SetDefaultColor(Color.GREEN);

plot downArrow = if DownTrend == 1 and DownTrend[1] == 0 then high else Double.NaN;
downArrow.SetPaintingStrategy(PaintingStrategy.ARROW_DOWN);
downArrow.SetDefaultColor(Color.RED);


### BUY
#AddOrder(OrderType.BUY_TO_OPEN, LongBuy == 1 and (tradetype == tradetype.long or tradetype == tradetype.both), open, tickcolor = GetColor(9), #arrowcolor = GetColor(9), name = "LONG");

#AddOrder(OrderType.SELL_TO_CLOSE, LongExit == 1 and (tradetype == tradetype.long or tradetype == tradetype.both), open, tickcolor = #GetColor(9), arrowcolor = GetColor(9), name = "LONG_EXIT");

AddOrder(OrderType.BUY_AUTO, LongBuy == 1 and (tradetype == tradetype.long or tradetype == tradetype.both) and Active1 and notrades, price = close, tickcolor = Color.ORANGE, arrowcolor = Color.ORANGE, name = "BUY");

AddOrder(OrderType.Sell_To_Close, LongExit == 1 and (tradetype == tradetype.long or tradetype == tradetype.both), price = open[-1], tickcolor = Color.ORANGE, arrowcolor = Color.ORANGE, name = "Sell To Close");


AddOrder(OrderType.Sell_TO_CLOSE, EOD or closeAllCondition, price = close, tickcolor = Color.ORANGE, arrowcolor = Color.ORANGE, name = "SELL EOD");

### SELL
#AddOrder(OrderType.SELL_TO_OPEN, ShortSell == 1 and (tradetype == tradetype.short or tradetype == tradetype.both), open, tickcolor = #GetColor(9), arrowcolor = GetColor(8), name = "SHORT");
#AddOrder(OrderType.BUY_TO_CLOSE, ShortExit == 1 and (tradetype == tradetype.short or tradetype == tradetype.both), open, tickcolor = #GetColor(9), arrowcolor = GetColor(8), name = "Short_EXIT");

AddOrder(OrderType.SELL_AUTO, ShortSell == 1 and (tradetype == tradetype.short or tradetype == tradetype.both)  and Active1 and notrades , price = close, tickcolor = Color.YELLOW, arrowcolor = Color.YELLOW, name = "SELL");

AddOrder(OrderType.Buy_To_Close, ShortExit == 1 and (tradetype == tradetype.short or tradetype == tradetype.both), price = open[-1], tickcolor = Color.ORANGE, arrowcolor = Color.ORANGE, name = "Buy To Close");

AddOrder(OrderType.BUY_TO_CLOSE, EOD or closeAllCondition, price = close, tickcolor = Color.ORANGE, arrowcolor = Color.ORANGE, name = "BUY EOD");

ApeX Predator · Jan 29, 2021

Perfect.
Code for Watchlist Posed per Request.

Code:

# RSM_WL
#
#CHANGELOG
# 2021.1.31 - V1.0 @SuryaKiranC - RSM Watch List study - to be used as watchlist:
#              Based on @Cos251 RSM_SCAN Code.
#            - Stocks currently in UpTrend
#            - Stocks currently in DownTrend
#            - Stocks where UpTrendJustSarted - first bar of UpTrend for scanend TF
#            - Stocks where DownTrendJustStarted - first bar of DownTrend for scanned TF
#            - Stocks where UpTredJustEnded - first NO Trend bar after UpTrend
#            - Stocks where DownTrendJustEnded - first NO Trend bar after DownTrend
#            - Recommend using default studies for SCANS of RSI, Stochastics or MACD for efficiency
#            
#REQUIREMENTS - RSI Set to 7, EXPONENTIAL
#               Stoch Slow 14 and 3 WILDERS
#               MACD 12,26,9 WEIGHTED
#
#
#CREDITS
# requesed by "@Joseph Patrick 18"
#
#LINK
# https://rockwell-files.s3.amazonaws.com/PXCompanionGuide2ndEd_cover.pdf
# Markus Heikoetter who is the author of the Power X Strategy
# https://usethinkscript.com/threads/mimicking-power-x-strategy-by-markus-heitkoetter.4283/
#
################################################################
##########                 RSI                         #########
################################################################

def lengthRSI = 7;
def price = close;
def averageTypeRSI = AverageType.EXPONENTIAL;
def NetChgAvg = MovingAverage(averageTypeRSI, price - price[1], lengthRSI);
def TotChgAvg = MovingAverage(averageTypeRSI, AbsValue(price - price[1]), lengthRSI);
def ChgRatio = if TotChgAvg != 0 then NetChgAvg / TotChgAvg else 0;
def RSI = 50 * (ChgRatio + 1);

################################################################
##########                 Stochastic Slow             #########
################################################################
def over_boughtSt = 80;
def over_soldSt = 20;
def KPeriod = 14;
def DPeriod = 3;
def priceH = high;
def priceL = low;
def priceC = close;
def averageTypeStoch = AverageType.WILDERS;
def SlowK = reference StochasticFull(over_boughtSt,  over_soldSt,  KPeriod,  DPeriod,  priceH,  priceL,  priceC,  3, if (averageTypeStoch == 1) then AverageType.SIMPLE else AverageType.EXPONENTIAL).FullK;
def SlowD = reference StochasticFull(over_boughtSt,  over_soldSt,  KPeriod,  DPeriod,  priceH,  priceL,  priceC,  3, if (averageTypeStoch == 1) then AverageType.SIMPLE else AverageType.EXPONENTIAL).FullD;

#################################################################
############           MACD Calculation                 #########
#################################################################
def fastLength = 12;
def slowLength = 26;
def MACDLength = 9;
def averageTypeMACD = AverageType.WEIGHTED;
def Value = MovingAverage(averageTypeMACD, close, fastLength) - MovingAverage(averageTypeMACD, close, slowLength);
def Avg = MovingAverage(averageTypeMACD, Value, MACDLength);
def Diff = Value - Avg;

#################################################################
############          SCAN Variables                    #########
#################################################################

# If you want to scan for stocks that are not in either trend you can add two filters and scan for false for both conditions

# The UpTrend and DownTrend plots can be used to scan for stocks that are currently in that trend
def UpTrend = if RSI > 50 and SlowK > 50 and Value > Avg then 1 else 0;
def DownTrend = if RSI < 50 and SlowK < 50 and Value < Avg then 1 else 0;

# The UpTrendJustStarted and DownTrendJustStarted plots can be used to find stocks that have just started
# a trend in either direction
def UpTrendJustStartedBool = if RSI > 50 and SlowK > 50 and Value > Avg then 1 else 0;
def DownTrendJustStartedBool = if RSI < 50 and SlowK < 50 and Value < Avg then 1 else 0;
def UpTrendJustStarted = if UpTrendJustStartedBool == 1 and UpTrendJustStartedBool[1] == 0 then 1 else 0;
def DownTrendJustStarted = if DownTrendJustStartedBool == 1 and DownTrendJustStartedBool[1] == 0 then 1 else 0;
def UpTrendJustEnded = if UpTrendJustStartedBool[1] == 1 and UpTrendJustStartedBool == 0 then 1 else 0;
def DownTrendJustEnded = if DownTrendJustStartedBool[1] == 1 and DownTrendJustStartedBool == 0 then 1 else 0;

def GetTrend = if UptrendJustStarted then 3 else if Uptrend then 2 else if UpTrendJustEnded then 1 else if DownTrendJustStarted then -1 else if DownTrend then -2 else if DownTrendJustEnded then -3 else 0;

AddLabel (yes, if GetTrend == 3 then "UpTrendJustStarted" else if GetTrend == 2 then "UpTrend" else if GetTrend == 1 then "UpTrendJustEnded" else if GetTrend == -1  then "DownTrendJustStarted" else if GetTrend == -2  then "DownTrend" else if GetTrend == -3 then "DownTrendJustEnded" else "NoTrend",Color.BLACK);

AssignBackgroundColor( if GetTrend == 3 then Color.LIGHT_GREEN else if GetTrend == 2 then Color.Green else if GetTrend == -1 then Color.LIGHT_RED else if GetTrend == -2 then Color.RED else Color.WHITE);

Version 1.1 For watch list with BarCount Since Up/Down Trend has started. Only for those 2 trends coded for now. Please use Version 1.0 if you have performance concerns, I haven't tested the code during market hours yet.

Code:

# RSM_WL
#
#CHANGELOG
# 2021.3.5  - V1.1 @SuryaKiranC - BarCount for how long Up/Down Trend is in progress. 
# 2021.1.31 - V1.0 @SuryaKiranC - RSM Watch List study - to be used as watchlist:
#              Based on @Cos251 RSM_SCAN Code. 
#            - Stocks currently in UpTrend
#            - Stocks currently in DownTrend
#            - Stocks where UpTrendJustSarted - first bar of UpTrend for scanend TF
#            - Stocks where DownTrendJustStarted - first bar of DownTrend for scanned TF
#            - Stocks where UpTredJustEnded - first NO Trend bar after UpTrend
#            - Stocks where DownTrendJustEnded - first NO Trend bar after DownTrend
#            - Recommend using default studies for SCANS of RSI, Stochastics or MACD for efficiency
#              
#REQUIREMENTS - RSI Set to 7, EXPONENTIAL
#               Stoch Slow 14 and 3 WILDERS
#               MACD 12,26,9 WEIGHTED
#
#
#CREDITS
# requesed by "@Joseph Patrick 18"
#
#LINK
# https://rockwell-files.s3.amazonaws.com/PXCompanionGuide2ndEd_cover.pdf
# Markus Heikoetter who is the author of the Power X Strategy
# https://usethinkscript.com/threads/mimicking-power-x-strategy-by-markus-heitkoetter.4283/
#
################################################################
##########                 RSI                         #########
################################################################

def lengthRSI = 7;
def price = close;
def averageTypeRSI = AverageType.EXPONENTIAL;
def NetChgAvg = MovingAverage(averageTypeRSI, price - price[1], lengthRSI);
def TotChgAvg = MovingAverage(averageTypeRSI, AbsValue(price - price[1]), lengthRSI);
def ChgRatio = if TotChgAvg != 0 then NetChgAvg / TotChgAvg else 0;
def RSI = 50 * (ChgRatio + 1);

################################################################
##########                 Stochastic Slow             #########
################################################################
def over_boughtSt = 80;
def over_soldSt = 20;
def KPeriod = 14;
def DPeriod = 3;
def priceH = high;
def priceL = low;
def priceC = close;
def averageTypeStoch = AverageType.WILDERS;
def SlowK = reference StochasticFull(over_boughtSt,  over_soldSt,  KPeriod,  DPeriod,  priceH,  priceL,  priceC,  3, if (averageTypeStoch == 1) then AverageType.SIMPLE else AverageType.EXPONENTIAL).FullK;
def SlowD = reference StochasticFull(over_boughtSt,  over_soldSt,  KPeriod,  DPeriod,  priceH,  priceL,  priceC,  3, if (averageTypeStoch == 1) then AverageType.SIMPLE else AverageType.EXPONENTIAL).FullD;

#################################################################
############           MACD Calculation                 #########
#################################################################
def fastLength = 12;
def slowLength = 26;
def MACDLength = 9;
def averageTypeMACD = AverageType.WEIGHTED;
def Value = MovingAverage(averageTypeMACD, close, fastLength) - MovingAverage(averageTypeMACD, close, slowLength);
def Avg = MovingAverage(averageTypeMACD, Value, MACDLength);
def Diff = Value - Avg;



#################################################################
############          SCAN Variables                    #########
#################################################################

# If you want to scan for stocks that are not in either trend you can add two filters and scan for false for both conditions

# The UpTrend and DownTrend plots can be used to scan for stocks that are currently in that trend
def UpTrend = if RSI > 50 and SlowK > 50 and Value > Avg then 1 else 0;
def DownTrend = if RSI < 50 and SlowK < 50 and Value < Avg then 1 else 0;

def bnumUp;
def bnumDown;
def closeUpTrendStart;
def closeDownTrendStart;
def UpTrendBarCount;
def DownTrendBarCount;
if UpTrend and (!UpTrend[1] or DownTrend[1]) {
    bnumUp = BarNumber();
    bnumDown = 0;
    closeUpTrendStart = close;
    closeDownTrendStart = 0;
    UpTrendBarCount = 1;
    DownTrendBarCount = 0;
} else if UpTrend {
    bnumUp = bnumUp[1];
    bnumDown = 0;
    closeUpTrendStart = closeUpTrendStart[1];
    closeDownTrendStart = 0;
    UpTrendBarCount = UpTrendBarCount[1] + 1;
    DownTrendBarCount = 0;
} else if DownTrend and (!DownTrend[1] or UpTrend[1]) {
    bnumUp = 0;
    bnumDown = BarNumber();
    closeDownTrendStart = close;
    closeUpTrendStart = 0;
    UpTrendBarCount = 0;
    DownTrendBarCount = 1;
} else if DownTrend {
    bnumDown = bnumDown[1];
    closeDownTrendStart = closeDownTrendStart[1];
    DownTrendBarCount = DownTrendBarCount[1] + 1;
    bnumUp = 0;
    closeUpTrendStart = 0;
    UpTrendBarCount = 0;
} else {
    bnumUp = 0;
    bnumDown = 0;
    closeUpTrendStart = 0;
    closeDownTrendStart = 0;
    UpTrendBarCount = 0;
    DownTrendBarCount = 0;
}

# The UpTrendJustStarted and DownTrendJustStarted plots can be used to find stocks that have just started
# a trend in either direction
def UpTrendJustStartedBool = if RSI > 50 and SlowK > 50 and Value > Avg then 1 else 0;
def DownTrendJustStartedBool = if RSI < 50 and SlowK < 50 and Value < Avg then 1 else 0;
def UpTrendJustStarted = if UpTrendJustStartedBool == 1 and UpTrendJustStartedBool[1] == 0 then 1 else 0;
def DownTrendJustStarted = if DownTrendJustStartedBool == 1 and DownTrendJustStartedBool[1] == 0 then 1 else 0;
def UpTrendJustEnded = if UpTrendJustStartedBool[1] == 1 and UpTrendJustStartedBool == 0 then 1 else 0;
def DownTrendJustEnded = if DownTrendJustStartedBool[1] == 1 and DownTrendJustStartedBool == 0 then 1 else 0;

def GetTrend = if UptrendJustStarted then 3 else if Uptrend then 2 else if UpTrendJustEnded then 1 else if DownTrendJustStarted then -1 else if DownTrend then -2 else if DownTrendJustEnded then -3 else 0; 

AddLabel (yes, if GetTrend == 3 then "UpTrendJustStarted" else if GetTrend == 2 then "BC:" + UpTrendBarCount + " UpTrend" else if GetTrend == 1 then "UpTrendJustEnded" else if GetTrend == -1  then "DownTrendJustStarted" else if GetTrend == -2  then "BC:" + DownTrendBarCount + " DownTrend" else if GetTrend == -3 then "DownTrendJustEnded" else "NoTrend",Color.BLACK);

AssignBackgroundColor( if GetTrend == 3 then Color.LIGHT_GREEN else if GetTrend == 2 then Color.Green else if GetTrend == -1 then Color.LIGHT_RED else if GetTrend == -2 then Color.RED else Color.WHITE);

Splinter · Jan 29, 2021

Thank you!

Topas · Jan 29, 2021

Awesome ....Wonderful job Done .... thank you

poststreet · Jan 29, 2021

ton of work, appreciate that

Iceburgh · Jan 30, 2021

@cos251 any chance you have code for that would put colors for trend in the watchlist? btw thanks

Alkkkz · Jan 30, 2021

Great work! The top indicator is showing an error on the periods.

jox51 · Jan 30, 2021

Awesome Sauce.....Strong work

rad14733 · Jan 30, 2021

@Alkkkz You cut off the error messages at the bottom but it says you haven't defined period which requires either a def, input, or plot prior to use...

Alkkkz · Jan 30, 2021

rad14733 said:
@Alkkkz You cut off the error messages at the bottom but it says you haven't defined period which requires either a def, input, or plot prior to use...

Did you check it on your side? the top indicator?

rad14733 · Jan 30, 2021

Alkkkz said:
Did you check it on your side? the top indicator?

No... I tested the Studies last night but not the scanner... I will allow @cos251 the opportunity to debug before I delve further...

cos251 · Jan 30, 2021

Thanks so much for the feedback guys. @Alkkkz - I'll check out the MTF error. I'm sure the copy paste was clean, but can you double check the input "period" variable was not cut off.

Iceburgh said:
@cos251 any chance you have code for that would put colors for trend in the watchlist? btw thanks

We can get that created.

Alkkkz · Jan 30, 2021

cos251 said:
Thanks so much for the feedback guys. @Alkkkz - I'll check out the MTF error. I'm sure the copy paste was clean, but can you double check the input "period" variable was not cut off.

We can get that created.

My apologies! I missed out period while copy/paste. Do we have to add indicator for each time frame to be shown on top?

cos251 · Jan 30, 2021

Alkkkz said:
My apologies! I missed out period while copy/paste. Do we have to add indicator for each time frame to be shown on top?

Awesome. Yup, add each TF you prefer.

Chence27 · Jan 30, 2021

Does anyone use this indicator to trade live? It looks nice backtesting but when I tested it in real time I found that you have to wait three bars after the initial signal for confirmation that the signal is actually valid. By that time you're usually too late. If anyone does use it, I'd be interested to know how you are able to compensate for this disadvantage.

Alkkkz · Jan 30, 2021

Chence27 said:
Does anyone use this indicator to trade live? It looks nice backtesting but when I tested it in real time I found that you have to wait three bars after the initial signal for confirmation that the signal is actually valid. By that time you're usually too late. If anyone does use it, I'd be interested to know how you are able to compensate for this disadvantage.

I backtested on SPY and it shows a mixed signal for each time frame. For example, It shows " No trend" on a daily while it is on a downtrend. Hope the developer looks into it.

Chence27 · Jan 30, 2021

Alkkkz said:
I backtested on SPY and it shows a mixed signal for each time frame. For example, It shows " No trend" on a daily while it is on a downtrend. Hope the developer looks into it.

That may be so. My focus was more on the signals appearing on the chart. I didn't pay too much attention to the upper labels.

hexis777 · Jan 30, 2021

cos251 said:

After quite a bit of collaboration from several members - we wanted to provide a central reference point for this indicator. The original request for this write up came from @Joseph Patrick 18 to replicate a well known strategy known as Power X. For the purposes of this indicator, it is being referred to as RSM (RSI, Stochastic,MACD) Indicator.

I'd like to thank the following members for their contributions: @Joseph Patrick 18 , @SuryaKiranC, @RickAns, @TradeUp (and many others, sorry if I forgot you)

Basic requirements for this indicator:

Use RSI, Stochastic and MACD standard indicators (with minor settings tweak) to identify trends
RSI - Set to 7, EXPONENTIAL MOVING AVERAGE
Stochastic Slow- Set to 14 and 3, WILDERS AVERAGE
MACD - Set to 12,26,9 - WEIGHTED AVERAGE
Paint Candles accordintly - (GREEN/UP, RED/DOWN)

Trend Identification

Reference material for strategy: https://rockwell-files.s3.amazonaws.com/PXCompanionGuide2ndEd_cover.pdf

Indicators Available (See below for code). The following scripts are provided for this indicator:

RSM Upper - works on any TF and TICK Charts
1. Color candles, Plots Arrows and displays informational labels
2. Most settings can be turned off if desired
RSM Lower
1. 3 Indicators in 1 - can be added to chart seperatly and choose indicator desired
2. Can plot RSI, Stochastic, RSI & Stochastic, or MACD Only as lower study with shading and candle painting
RSM MTF
1. Adds Labels for ALL TF's to show current status of RSM Signal
RSM SCAN - Use to scan for the following:
1. Stocks currently in UpTrend
2. Stocks just starting UpTrend
3. Stocks currently in DownTrend
4. Stocks just starting DownTrend

* - Quick personal note - thanks so much for letting me work on this project and for you patience. I had a chance to learn quite a bit and hopefully improve my trading in the process. Great community here!!!!!!!!!!!

Disclaimer
This indicator may or may not be suitable for you. Constructive criticism welcomed in order to improve. Please report any bugs so we can continue to improve it.

RSM Upper

Features

Paint Bars (Green, Red, Gray)
Shade chart area per trend
Select between trade type (Long,Short,Both)
Dynamic calculation of ADR/ATR at moment of trend start
Select between ADR/ATR for target and stop loss calculations
Plot ADR/ATR target lines while trend is active (on/off)
1. Plot 3 targets up/down by default
Plot additional targets (4-6) if desired (on/off)
Shade the ADR/ATR zones (on/off)
Stop loss multiplier selection
Show Labels for first 3 targets
Show Labels for Trend info

Code:

#START OF RSI/Stochastic/MACD Confluence Strategy for ThinkOrSwim
#RSM_STANDARD_UPPER
#
#CHANGELOG
#
# 2021.01.15 V1.6 @SuryaKirnaC
#                         - Modifed ADR Zonse shading colors
#                         - Adjusted Indicator and target labels for space
#                         - Made audible alerts user configurable via settings
#
# 2021.01.04 V1.5 @cos251 - Fixed long, short ADR Zone plots to match TradeType selection (Long, Short, BOTH) - will only plot as selected
#
# 2020.12.21 V1.4 @cos251 - Added input "plotADR"
#                            - plots dynamic ATR/ADR targets- default plots 3 targets - can be turned off by setting "plotADR" to no
#                         - Added input "showExtraTargets"
#                            -  - plots dynamic ATR/ADR targets- for targets 4, 5, and 6
#                         - Added input "showADRZones"
#                            - Dynamic shading of ATR/ADR targets - can be turned off in settings using "showADRZones"
#                         - Added dynamic calculation of both ATR and ADR. User can select between ATR and ADR in settings
#                         - Added input "showADRLabels"
#                            - Added Dynamic Target labels for UpTrend or DownTrend; they will be green or red depending on Up or Down trend
#                         - Added input "showTodayOnly"
#                            - Added option to display shaded ADR/ATR zones for today only "showTodayOnly"
#                            - if set to no - ADR/ATR plots will be plotted for all available data on chart
#                         - Added ability to plot ATR or ADR on DAY chart - MUST TURN OFF "showTodayOnly"
#                         - Added Labels that can be used for "debug" - MUST change "debug" setting to yes
#                         - Added Trend information labels that can be turned on/off
#                    
#
# 2020.11.30 V1.3 @cos251 - Stripped down TICK Version; No ADR since time based aggregation period do not work on TICK #                           Charts
#
# 2020.11.30 V1.2 @cos251 - Add ADR plots and shading per request; will tweak these settings to improve overall
#                           options
# 2020.11.12 V1.1 @cos251 - Changed from strategy to standard study. Added Green Arrow UP
#                           and Red Arrow down when trend starts.  Added option to change to high
#                           timeframe but this WILL repaint; if used, should be used with other
#                           indicators to confirm an entry/exit.
#
# 2020.10.27 V1.0 @cos251 - Added RSI, StochasticSlow and MACD to same indicator
#                         - also calculates MACD;
#                         - Will shade the lower plot area of the following conditions are met
#                           Shade GREEN = RSI > 50 and SlowK > 50 and (macd)Value > (macd)Avg
#                           Shade RED = RSI < 50 and SlowK < 50 and (macd)Value < (macd)Avg
#
#            
#REQUIREMENTS - RSI Set to 7, EXPONENTIAL
#               Stoch Slow 14 and 3 WILDERS
#               MACD 12,26,9 WEIGHTED

declare upper;
################################################################
##########                 Variables                   #########
################################################################

input paintBars = yes;
input showRSMShade = no;
input tradetype = { "long", "short", default "both" };
input rangeType = { default "ADR", "ATR" };
input stopLossMultiplier = 1.0;
input plotADR = yes;
input showADRZones = yes;
input showTodayOnly = yes;
input showTrendLabels = no;
input showADRLabels = no;
input showExtraTargets = no;
input showIndicatorLabels = no;
input audibleAlerts = yes;
input debug = no; # change to "NO" after testing

################################################################
##########              ATR/ADR Calc                   #########
################################################################
input ATRlength = 14;
input ATRaverageType = AverageType.WILDERS;
def Range;
if rangeType == rangeType.ATR {
    Range = MovingAverage(ATRaverageType, TrueRange(high, close, low), ATRlength);
} else {
    Range = Average(high - low, 7);
}

################################################################
##########         Booleans Set for Plot Use           #########
################################################################
def afterStart = GetTime() > RegularTradingStart(GetYYYYMMDD());
def beforeEnd = GetTime() < RegularTradingEnd(GetYYYYMMDD());
def today = if GetLastDay() == GetDay() then 1 else Double.NaN;
def dailyO = if today and afterStart and beforeEnd then DailyOpen() else Double.NaN;
plot openPrice = if dailyO then DailyOpen() else Double.NaN;
AddLabel(if debug then yes else no,"Day = :"+today);
AddLabel(if debug then yes else no,"Day = :"+GetDay());

################################################################
##########                 RSI                         #########
################################################################
input lengthRSI = 7;
input price = close;
input averageTypeRSI = AverageType.EXPONENTIAL;
def NetChgAvg = MovingAverage(averageTypeRSI, close - close[1], lengthRSI);
def TotChgAvg = MovingAverage(averageTypeRSI, AbsValue(close - close[1]), lengthRSI);
def ChgRatio = if TotChgAvg != 0 then NetChgAvg / TotChgAvg else 0;
def RSI = 50 * (ChgRatio + 1);

################################################################
##########                 Stochastic Slow             #########
################################################################
input over_boughtSt = 80;
input over_soldSt = 20;
input KPeriod = 14;
input DPeriod = 3;
input averageTypeStoch = AverageType.WILDERS;
def SlowK = reference StochasticFull(over_boughtSt, over_soldSt, KPeriod, DPeriod, high, low, close, 3, averageTypeStoch).FullK;
def SlowD = reference StochasticFull(over_boughtSt, over_soldSt, KPeriod, DPeriod, high, low, close, 3, averageTypeStoch).FullD;

################################################################
##########                  MACD                       #########
################################################################
input fastLength = 12;
input slowLength = 26;
input MACDLength = 9;
input averageTypeMACD = AverageType.WEIGHTED;
def Value = MovingAverage(averageTypeMACD, close, fastLength) - MovingAverage(averageTypeMACD, close, slowLength);
def Avg = MovingAverage(averageTypeMACD, Value, MACDLength);
def Diff = Value - Avg;

################################################################
##########         Assign Price Color                  #########
################################################################
AssignPriceColor(if paintBars and RSI >= 50 and SlowK >= 50 and Value > Avg then Color.GREEN else if paintBars and RSI < 50 and SlowK < 50 and Value < Avg then Color.RED else if paintBars then Color.DARK_GRAY else Color.CURRENT);

#################################################################
#####   Up/Down Trend Check/SCAN Variables              #########
#################################################################
plot UpTrend = if RSI >= 50 and SlowK >= 50 and Value > Avg then 1 else 0;
plot DownTrend = if RSI < 50 and SlowK < 50 and Value < Avg then 1 else 0;
UpTrend.Hide();
DownTrend.Hide();
plot upArrow = if UpTrend == 1 and UpTrend[1] == 0 and (tradetype == tradetype.long or tradetype == tradetype.both) then low else Double.NaN;
upArrow.SetPaintingStrategy(PaintingStrategy.ARROW_UP);
upArrow.SetDefaultColor(Color.GREEN);
upArrow.SetLineWeight(4);
plot downArrow = if DownTrend == 1 and DownTrend[1] == 0 and (tradetype == tradetype.short or tradetype == tradetype.both) then high else Double.NaN;
downArrow.SetPaintingStrategy(PaintingStrategy.ARROW_DOWN);
downArrow.SetDefaultColor(Color.RED);
downArrow.SetLineWeight(4);

def bnumUp;
def bnumDown;
def closeUpTrendStart;
def closeDownTrendStart;
def UpTrendBarCount;
def DownTrendBarCount;
if UpTrend and (!UpTrend[1] or DownTrend[1]) {
    bnumUp = BarNumber();
    bnumDown = 0;
    closeUpTrendStart = close;
    closeDownTrendStart = 0;
    UpTrendBarCount = 1;
    DownTrendBarCount = 0;
} else if UpTrend {
    bnumUp = bnumUp[1];
    bnumDown = 0;
    closeUpTrendStart = closeUpTrendStart[1];
    closeDownTrendStart = 0;
    UpTrendBarCount = UpTrendBarCount[1] + 1;
    DownTrendBarCount = 0;
} else if DownTrend and (!DownTrend[1] or UpTrend[1]) {
    bnumUp = 0;
    bnumDown = BarNumber();
    closeDownTrendStart = close;
    closeUpTrendStart = 0;
    UpTrendBarCount = 0;
    DownTrendBarCount = 1;
} else if DownTrend {
    bnumDown = bnumDown[1];
    closeDownTrendStart = closeDownTrendStart[1];
    DownTrendBarCount = DownTrendBarCount[1] + 1;
    bnumUp = 0;
    closeUpTrendStart = 0;
    UpTrendBarCount = 0;
} else {
    bnumUp = 0;
    bnumDown = 0;
    closeUpTrendStart = 0;
    closeDownTrendStart = 0;
    UpTrendBarCount = 0;
    DownTrendBarCount = 0;
}
def c;
if BarNumber() == bnumUp or BarNumber() == bnumDown {
    c = Range;
} else if UpTrend or DownTrend {
    c = c[1];
} else {
    c = 0;
}
AddLabel(if debug then yes else no, "Current Bar:" + BarNumber());
AddLabel(if debug then yes else no, "C:" + c);
AddLabel( if debug then yes else no, "PlotADR: "+plotADR);
AddLabel( if debug then yes else no, "TodayOnly: "+showTodayOnly);


#################################################################
############        ADR/ATR Targets Shading              #########
#################################################################
# - UpTrend Targets and StopLoss
plot UpTrendStopLoss = if (tradetype == tradetype.both or tradetype == tradetype.long) and UpTrend and plotADR and !showTodayOnly then closeUpTrendStart - (c * stopLossMultiplier) else if (tradetype == tradetype.both or tradetype == tradetype.long) and UpTrend and plotADR and showTodayOnly  and today and afterStart and beforeEnd then closeUpTrendStart - c else Double.NaN;
plot oneADRPlus = if (tradetype == tradetype.both or tradetype == tradetype.long) and UpTrend and plotADR and !showTodayOnly then closeUpTrendStart + (c * 1) else if (tradetype == tradetype.both or tradetype == tradetype.long) and UpTrend and plotADR and showTodayOnly  and today and afterStart and beforeEnd then closeUpTrendStart + c else Double.NaN;
plot twoADRPlus = if (tradetype == tradetype.both or tradetype == tradetype.long) and UpTrend and plotADR and !showTodayOnly then closeUpTrendStart + (c * 2) else if (tradetype == tradetype.both or tradetype == tradetype.long) and UpTrend and plotADR and showTodayOnly  and today and afterStart and beforeEnd then closeUpTrendStart + (c * 2) else Double.NaN;
plot threeADRPlus = if (tradetype == tradetype.both or tradetype == tradetype.long) and UpTrend and plotADR and !showTodayOnly then closeUpTrendStart + (c * 3) else if (tradetype == tradetype.both or tradetype == tradetype.long) and UpTrend and plotADR and showTodayOnly  and today and afterStart and beforeEnd then closeUpTrendStart + (c * 3) else Double.NaN;
plot fourADRPlus = if (tradetype == tradetype.both or tradetype == tradetype.long) and UpTrend and plotADR and !showTodayOnly and showExtraTargets then closeUpTrendStart + (c * 4) else if (tradetype == tradetype.both or tradetype == tradetype.long) and UpTrend and plotADR and showTodayOnly  and today and afterStart and beforeEnd and showExtraTargets then closeUpTrendStart + (c * 4) else Double.NaN;
plot fiveADRPlus = if (tradetype == tradetype.both or tradetype == tradetype.long) and UpTrend and plotADR and !showTodayOnly and showExtraTargets then closeUpTrendStart + (c * 5) else if (tradetype == tradetype.both or tradetype == tradetype.long) and UpTrend and plotADR and showTodayOnly  and today and afterStart and beforeEnd and showExtraTargets then closeUpTrendStart + (c * 5) else Double.NaN;
plot sixADRPlus = if (tradetype == tradetype.both or tradetype == tradetype.long) and UpTrend and plotADR and !showTodayOnly and showExtraTargets then closeUpTrendStart + (c * 6) else if (tradetype == tradetype.both or tradetype == tradetype.long) and UpTrend and plotADR and showTodayOnly  and today and afterStart and beforeEnd and showExtraTargets then closeUpTrendStart + (c * 6) else Double.NaN;
# - DownTrend Targets and StopLoss
plot DownTrendStopLoss = if (tradetype == tradetype.both or tradetype == tradetype.short) and DownTrend and plotADR and !showTodayOnly then closeDownTrendStart + (c * stopLossMultiplier) else if (tradetype == tradetype.both or tradetype == tradetype.short) and DownTrend and plotADR and showTodayOnly  and today and afterStart and beforeEnd then closeDownTrendStart + c else Double.NaN;
plot oneADRMinus = if (tradetype == tradetype.both or tradetype == tradetype.short) and DownTrend and plotADR and !showTodayOnly then closeDownTrendStart - c else if (tradetype == tradetype.both or tradetype == tradetype.short) and DownTrend and plotADR and showTodayOnly  and today and afterStart and beforeEnd then closeDownTrendStart - c else Double.NaN;
plot twoADRMinus = if (tradetype == tradetype.both or tradetype == tradetype.short) and DownTrend and plotADR and !showTodayOnly then closeDownTrendStart - (c * 2) else if (tradetype == tradetype.both or tradetype == tradetype.short) and DownTrend and plotADR and showTodayOnly  and today and afterStart and beforeEnd then closeDownTrendStart - (c * 2) else Double.NaN;
plot threeADRMinus = if (tradetype == tradetype.both or tradetype == tradetype.short) and DownTrend and plotADR and !showTodayOnly then closeDownTrendStart - (c * 3) else if (tradetype == tradetype.both or tradetype == tradetype.short) and DownTrend and plotADR and showTodayOnly  and today and afterStart and beforeEnd then closeDownTrendStart - (c * 3) else Double.NaN;
plot fourADRMinus = if (tradetype == tradetype.both or tradetype == tradetype.short) and DownTrend and plotADR and !showTodayOnly and showExtraTargets then closeDownTrendStart - (c * 4) else if (tradetype == tradetype.both or tradetype == tradetype.short) and DownTrend and plotADR and showTodayOnly  and today and afterStart and beforeEnd  and showExtraTargets then closeDownTrendStart - (c * 4) else Double.NaN;
plot fiveADRMinus = if (tradetype == tradetype.both or tradetype == tradetype.short) and DownTrend and plotADR and !showTodayOnly and showExtraTargets then closeDownTrendStart - (c * 5) else if (tradetype == tradetype.both or tradetype == tradetype.short) and DownTrend and plotADR and showTodayOnly  and today and afterStart and beforeEnd  and showExtraTargets then closeDownTrendStart - (c * 5) else Double.NaN;
plot sixADRMinus = if (tradetype == tradetype.both or tradetype == tradetype.short) and DownTrend and plotADR and !showTodayOnly and showExtraTargets then closeDownTrendStart - (c * 6) else if (tradetype == tradetype.both or tradetype == tradetype.short) and DownTrend and plotADR and showTodayOnly  and today and afterStart and beforeEnd  and showExtraTargets then closeDownTrendStart - (c * 6) else Double.NaN;

UpTrendStopLoss.SetDefaultColor(Color.LIGHT_RED);
oneADRPlus.SetDefaultColor(Color.LIGHT_GREEN);
twoADRPlus.SetDefaultColor(Color.LIGHT_GREEN);
threeADRPlus.SetDefaultColor(Color.LIGHT_GREEN);
fourADRPlus.SetDefaultColor(Color.LIGHT_GREEN);
fiveADRPlus.SetDefaultColor(Color.LIGHT_GREEN);
sixADRPlus.SetDefaultColor(Color.LIGHT_GREEN);

DownTrendStopLoss.SetDefaultColor(Color.LIGHT_GREEN);
oneADRMinus.SetDefaultColor(Color.LIGHT_RED);
twoADRMinus.SetDefaultColor(Color.LIGHT_RED);
threeADRMinus.SetDefaultColor(Color.LIGHT_RED);
fourADRMinus.SetDefaultColor(Color.LIGHT_RED);
fiveADRMinus.SetDefaultColor(Color.LIGHT_RED);
sixADRMinus.SetDefaultColor(Color.LIGHT_RED);


#################################################################
############          ADR/ATR Zone Shading              #########
#################################################################
def u = if UpTrend then closeUpTrendStart else Double.NaN;
def d = if DownTrend then closeDownTrendStart else Double.NaN;
def bnumUpCheck = if bnumUp != 0 then 1 else Double.NaN;
def bnumDownCheck = if bnumDown != 0 then 1 else Double.NaN;
AddCloud(if showADRZones and UpTrend and bnumUpCheck and showExtraTargets then sixADRPlus else if showADRZones and UpTrend and bnumUpCheck then threeADRPlus else Double.NaN, if showADRZones and UpTrend and bnumUpCheck then u else Double.NaN , CreateColor(213,252,213));
AddCloud(if showADRZones and UpTrend then u else Double.NaN, if showADRZones and UpTrend then UpTrendStopLoss else Double.NaN , CreateColor(255,174,174));
# - Shade Downtrend ADR/ATR zones
AddCloud(if showADRZones and DownTrend and bnumDownCheck then d else Double.NaN, if showADRZones and DownTrend and bnumDownCheck and showExtraTargets then sixADRMinus else if showADRZones and DownTrend and bnumDownCheck then threeADRMinus else Double.NaN , CreateColor(213,252,213));
AddCloud(if showADRZones and DownTrend then DownTrendStopLoss else Double.NaN, if showADRZones and DownTrend then d else Double.NaN, CreateColor(255,174,174));


#################################################################
####    RSM shade areas based on criteria; adjust as needed  ####
#################################################################
AddCloud(if showRSMShade and RSI >= 50 and SlowK >= 50 and Value > Avg then Double.POSITIVE_INFINITY else Double.NaN, if RSI >= 50 and SlowK >= 50 and Value > Avg then Double.NEGATIVE_INFINITY else Double.NaN, Color.LIGHT_GREEN);
AddCloud(if showRSMShade and RSI < 50 and SlowK < 50 and Value < Avg then Double.POSITIVE_INFINITY else Double.NaN, if RSI < 50 and SlowK < 50 and Value < Avg then Double.NEGATIVE_INFINITY else Double.NaN, Color.LIGHT_RED);


#################################################################
############   Labels disable/blockout as needed        #########
#################################################################
# - Trend Labels
AddLabel(showTrendLabels and (bnumDown != 0 or bnumUp != 0), "Trend BAR#: " + (if bnumUp > 0 then bnumUp else + bnumDown), if bnumUp > 0 then Color.GREEN else Color.RED);
AddLabel(showTrendLabels and (bnumDown != 0 or bnumUp != 0), "Trend @ $:" + (if bnumUp > 0 then closeUpTrendStart else  + closeDownTrendStart), if bnumUp > 0 then Color.GREEN else Color.RED);
AddLabel(showTrendLabels, "Tot Bars:" + (if bnumUp > 0 then UpTrendBarCount else DownTrendBarCount), if bnumUp > 0 then Color.GREEN else Color.RED);
AddLabel(showTrendLabels, "RSM:" + (if UpTrend == 1 then "L" else if DownTrend == 1 then "S" else "I"), if UpTrend == 1 then Color.GREEN else if DownTrend == 1 then Color.RED else Color.GRAY);

# - ADR/ATR Labels Targets
AddLabel(showADRLabels, "Open:" + dailyO, Color.ORANGE);

AddLabel(showADRLabels and (UpTrend or DownTrend), "Target #1: " + (if UpTrend then round(oneADRPlus,2) else if DownTrend then round(oneADRMinus,2) else Double.NaN)+ " ", if UpTrend then Color.GREEN else if DownTrend then Color.RED else Color.GRAY);
AddLabel(showADRLabels and (UpTrend or DownTrend), "Target #2: " + (if UpTrend then round(twoADRPlus,2) else if DownTrend then round(twoADRMinus,2) else Double.NaN)+ " ", if UpTrend then Color.GREEN else if DownTrend then Color.RED else Color.GRAY);
AddLabel(showADRLabels and (UpTrend or DownTrend), "Target #3: " + (if UpTrend then round(threeADRPlus,2) else if DownTrend then round(threeADRMinus,2) else Double.NaN)+ " ", if UpTrend then Color.GREEN else if DownTrend then Color.RED else Color.GRAY);

# - Indicator Label
AddLabel(if showIndicatorLabels then yes else no, "RSI:" + Round (RSI, 2) + " | sK:" + Round(SlowK, 2) + " | Macd:" + Round(Value, 4) + "  ", Color.ORANGE);

#### ALERTS Sound
alert(audibleAlerts and upArrow,"RSM UpTrend Started",alert.BAR,sound.DING);
alert(audibleAlerts and downArrow,"RSM DownTrend Started",alert.BAR,sound.DING);

RSM Lower

Features

3 Indicators in 1
1. RSI - Only
2. Stochastic - Only
3. RSI & Stochastic
4. MACD - Only
Will shade lower area when trend is confirmed for each indicator individually
All settings for each indicator made avaiable in settings for user configuration
Paint Bars if not used with upper study - user configurable

Code:

#RSM_Lower_v1.3
#
#CHANGELOG
#
# 2021.01.11 V1.3 @cos251 - Addjusted lower shading to shade trends when individual indicator crosses respective midline
#                           Shading will match if stochPlots is set to "Both" (RSI & Stochastci)
#
# 2020.11.30 V1.2 @cos251 - Added quick option to select plot(s) (RSI, Stochastic, Both or MACDOnly), set SlowD to enabled,
#                           user can uncheck SlowD plot if desired; adjusted coloring and shading to work with
#                           any plot selected; Combined plots for ease of use.
#
# 2020.10.30 V1.1 @cos251 - Added UpTrend and DownTrend variables that can be used for a SCAN (HAS BEEN REMOVED)
# 2020.10.27 V1.0 @cos251 - Added RSI, StochasticSlow and MACD to same indicator; this
#                           will plot only RSI and Stochastic but also
#                         - calculates MACD; Will shade the lower plot area of the following conditions are met
#                           Shade GREEN = RSI > 50 and SlowK > 50 and (macd)Value > (macd)Avg
#                           Shade RED = RSI < 50 and SlowK < 50 and (macd)Value < (macd)Avg
#            
#REQUIREMENTS - RSI Set to 7, EXPONENTIAL
#               Stoch Slow 14 and 3 WILDERS
#               MACD 12,26,9 WEIGHTED
#
#
#CREDITS
# requesed by "@Joseph Patrick 18"
#
#LINK
# https://rockwell-files.s3.amazonaws.com/PXCompanionGuide2ndEd_cover.pdf
# Markus Heikoetter who is the author of the Power X Strategy
# https://usethinkscript.com/threads/mimicking-power-x-strategy-by-markus-heitkoetter.4283/
#
#USAGE
#



declare lower;

input paintBars = yes;
input selectPlots = { default "RSI", "Stochastic", "Both", "MACDOnly" };

################################################################
##########                 RSI                         #########
################################################################

input lengthRSI = 7;
input over_BoughtRSI = 80;
input over_SoldRSI = 20;
input price = close;
input averageTypeRSI = AverageType.EXPONENTIAL;
input showBreakoutSignalsRSI = no;
input showRSI_obos = no;


def NetChgAvg = MovingAverage(averageTypeRSI, price - price[1], lengthRSI);
def TotChgAvg = MovingAverage(averageTypeRSI, AbsValue(price - price[1]), lengthRSI);
def ChgRatio = if TotChgAvg != 0 then NetChgAvg / TotChgAvg else 0;
def calcRSI = 50 * (ChgRatio + 1);

plot RSI = if selectPlots == selectPlots.RSI or selectPlots == selectPlots.Both then calcRSI else Double.NaN;
plot OverSold_RSI = if (selectPlots == selectPlots.RSI or selectPlots == selectPlots.Both) and showRSI_obos then over_SoldRSI else Double.NaN;
plot OverBought_RSI = if (selectPlots == selectPlots.RSI or selectPlots == selectPlots.Both) and showRSI_obos then over_BoughtRSI else Double.NaN;
plot UpSignalRSI = if RSI crosses above OverSold_RSI then OverSold_RSI else Double.NaN;
plot DownSignalRSI = if RSI crosses below OverBought_RSI then OverBought_RSI else Double.NaN;
UpSignalRSI.SetHiding(!showBreakoutSignalsRSI);
DownSignalRSI.SetHiding(!showBreakoutSignalsRSI);
RSI.DefineColor("OverBought", GetColor(5));
RSI.DefineColor("Normal", Color.YELLOW);
RSI.DefineColor("OverSold", GetColor(1));
#RSI.AssignValueColor(if RSI > rsiover_Bought then RSI.Color("OverBought") else if RSI < rsiover_Sold then RSI.Color("OverSold") else RSI.Color("Normal"));
OverSold_RSI.SetDefaultColor(GetColor(8));
OverBought_RSI.SetDefaultColor(GetColor(8));
UpSignalRSI.SetDefaultColor(Color.UPTICK);
UpSignalRSI.SetPaintingStrategy(PaintingStrategy.ARROW_UP);
DownSignalRSI.SetDefaultColor(Color.DOWNTICK);
DownSignalRSI.SetPaintingStrategy(PaintingStrategy.ARROW_DOWN);


################################################################
##########                 Stochastic Slow             #########
################################################################
input over_boughtSt = 80;
input over_soldSt = 20;
input KPeriod = 14;
input DPeriod = 3;
input priceH = high;
input priceL = low;
input priceC = close;
input averageTypeStoch = AverageType.WILDERS;
input showBreakoutSignalsStoch = {default "No", "On SlowK", "On SlowD", "On SlowK & SlowD"};
input showStochastic_ob_os = no;

def calcSlowK = reference StochasticFull(over_boughtSt, over_soldSt, KPeriod, DPeriod, priceH, priceL, priceC, 3, averageTypeStoch).FullK;
def calcSlowD = reference StochasticFull(over_boughtSt, over_soldSt, KPeriod, DPeriod, priceH, priceL, priceC, 3, averageTypeStoch).FullD;
plot SlowK = if selectPlots == selectPlots.Stochastic or selectPlots == selectPlots.Both then calcSlowK else Double.NaN;
plot SlowD = if selectPlots == selectPlots.Stochastic or selectPlots == selectPlots.Both then calcSlowD else Double.NaN;
plot OverBoughtSt = if (selectPlots == selectPlots.Stochastic or selectPlots == selectPlots.Both) and showStochastic_ob_os then over_boughtSt else Double.NaN;
plot OverSoldSt = if (selectPlots == selectPlots.Stochastic or selectPlots == selectPlots.Both) and showStochastic_ob_os then over_soldSt else Double.NaN;

def upK = SlowK crosses above OverSoldSt;
def upD = SlowD crosses above OverSoldSt;
def downK = SlowK crosses below OverBoughtSt;
def downD = SlowD crosses below OverBoughtSt;

plot UpSignalSt;
plot DownSignalSt;
switch (showBreakoutSignalsStoch) {
case "No":
    UpSignalSt = Double.NaN;
    DownSignalSt = Double.NaN;
case "On SlowK":
    UpSignalSt = if upK then OverSoldSt else Double.NaN;
    DownSignalSt = if downK then OverBoughtSt else Double.NaN;
case "On SlowD":
    UpSignalSt = if upD then OverSoldSt else Double.NaN;
    DownSignalSt = if downD then OverBoughtSt else Double.NaN;
case "On SlowK & SlowD":
    UpSignalSt = if upK or upD then OverSoldSt else Double.NaN;
    DownSignalSt = if downK or downD then OverBoughtSt else Double.NaN;
}
UpSignalSt.SetHiding(showBreakoutSignalsStoch == showBreakoutSignalsStoch."No");
DownSignalSt.SetHiding(showBreakoutSignalsStoch == showBreakoutSignalsStoch."No");
SlowK.SetDefaultColor(Color.WHITE);
SlowD.SetDefaultColor(Color.DARK_ORANGE);
OverBoughtSt.SetDefaultColor(GetColor(1));
OverSoldSt.SetDefaultColor(GetColor(1));
UpSignalSt.SetDefaultColor(Color.UPTICK);
UpSignalSt.SetPaintingStrategy(PaintingStrategy.ARROW_UP);
DownSignalSt.SetDefaultColor(Color.DOWNTICK);
DownSignalSt.SetPaintingStrategy(PaintingStrategy.ARROW_DOWN);


#################################################################
#MACD Calculation
input fastLength = 12;
input slowLength = 26;
input MACDLength = 9;
input averageTypeMACD = AverageType.WEIGHTED;
input showBreakoutSignalsMACD = no;
def calcValue = MovingAverage(averageTypeMACD, close, fastLength) - MovingAverage(averageTypeMACD, close, slowLength);
def calcAvg = MovingAverage(averageTypeMACD, calcValue, MACDLength);
def calcDiff = calcValue - calcAvg;
plot ZeroLine = if selectPlots == selectPlots.MACDOnly then 0 else Double.NaN;
plot Value = if selectPlots == selectPlots.MACDOnly then calcValue else Double.NaN;
plot Avg = if selectPlots == selectPlots.MACDOnly then calcAvg else Double.NaN;
plot Diff = if selectPlots == selectPlots.MACDOnly then calcDiff else Double.NaN;
plot UpSignalMACD = if calcDiff crosses above 0 then 0 else Double.NaN;
plot DownSignalMACD = if calcDiff crosses below 0 then 0 else Double.NaN;

UpSignalMACD.SetHiding(!showBreakoutSignalsMACD);
DownSignalMACD.SetHiding(!showBreakoutSignalsMACD);

Value.SetDefaultColor(Color.GREEN);
Avg.SetDefaultColor(Color.RED);
Diff.SetDefaultColor(GetColor(5));
Diff.SetPaintingStrategy(PaintingStrategy.HISTOGRAM);
Diff.SetLineWeight(4);
Diff.DefineColor("Positive and Up", Color.CYAN);
Diff.DefineColor("Positive and Down", Color.BLUE);
Diff.DefineColor("Negative and Down", Color.RED);
Diff.DefineColor("Negative and Up", Color.YELLOW);
Diff.AssignValueColor(if Diff >= 0 then if Diff > Diff[1] then Diff.Color("Positive and Up") else Diff.Color("Positive and Down") else if Diff < Diff[1] then Diff.Color("Negative and Down") else Diff.Color("Negative and Up"));
ZeroLine.SetDefaultColor(GetColor(0));
UpSignalMACD.SetDefaultColor(Color.UPTICK);
UpSignalMACD.SetPaintingStrategy(PaintingStrategy.ARROW_UP);
DownSignalMACD.SetDefaultColor(Color.DOWNTICK);
DownSignalMACD.SetPaintingStrategy(PaintingStrategy.ARROW_DOWN);


# Check Each Signal for over 50 and MACD for Value > Avg
def rsiGreen = if calcRSI > 50 then 1 else Double.NaN;
def rsiRed = if calcRSI < 50 then 1 else Double.NaN;
def stochGreen = if calcSlowK >= 50 then 1 else Double.NaN;
def stochRed = if calcSlowK < 50 then 1 else Double.NaN;
def macdGreen = if calcValue > calcAvg then 1 else Double.NaN;
def macdRed = if calcValue < calcAvg then 1 else Double.NaN;
def green = if rsiGreen and stochGreen and macdGreen then 1 else Double.NaN;
def red = if rsiRed and stochRed and macdRed then 1 else Double.NaN;


#RSI Color Assignment per requeset
RSI.AssignValueColor(if calcRSI > 50 and calcSlowK > 50 and calcValue > calcAvg then Color.GREEN else if calcRSI < 50 and calcSlowK < 50 and calcValue < calcAvg then Color.RED else Color.DARK_GRAY);

#AssignPriceColor
AssignPriceColor(if paintBars and calcRSI > 50 and calcSlowK > 50 and calcValue > calcAvg then Color.GREEN else if paintBars and calcRSI < 50 and calcSlowK < 50 and calcValue < calcAvg then Color.RED else if paintBars then Color.DARK_GRAY else Color.CURRENT);

#################################################################
############  Shade areas based on criteria; adjust as needed  ##
#################################################################
AddCloud(if rsiGreen and stochGreen and selectPlots == selectPlots.Both then Double.POSITIVE_INFINITY else Double.NaN, if rsiGreen and StochGreen and selectPlots == selectPlots.Both then Double.NEGATIVE_INFINITY else Double.NaN, Color.LIGHT_GREEN);
AddCloud(if rsiRed and stochRed and selectPlots == selectPlots.Both then Double.POSITIVE_INFINITY else Double.NaN, if rsiRed and stochRed and selectPlots == selectPlots.Both then Double.NEGATIVE_INFINITY else Double.NaN, Color.LIGHT_RED);

AddCloud(if rsiGreen and selectPlots == selectPlots.RSI then Double.POSITIVE_INFINITY else Double.NaN, if rsiGreen and selectPlots == selectPlots.RSI then Double.NEGATIVE_INFINITY else Double.NaN, Color.LIGHT_GREEN);
AddCloud(if rsiRed and selectPlots == selectPlots.RSI then Double.POSITIVE_INFINITY else Double.NaN, if rsiRed and selectPlots == selectPlots.RSI then Double.NEGATIVE_INFINITY else Double.NaN, Color.LIGHT_RED);

AddCloud(if stochGreen and selectPlots == selectPlots.Stochastic then Double.POSITIVE_INFINITY else Double.NaN, if stochGreen and selectPlots == selectPlots.Stochastic then Double.NEGATIVE_INFINITY else Double.NaN, Color.LIGHT_GREEN);
AddCloud(if stochRed and selectPlots == selectPlots.Stochastic then Double.POSITIVE_INFINITY else Double.NaN, if stochRed and selectPlots == selectPlots.Stochastic then Double.NEGATIVE_INFINITY else Double.NaN, Color.LIGHT_RED);

AddCloud(if macdGreen and selectPlots == selectPlots.MACDOnly then Double.POSITIVE_INFINITY else Double.NaN, if macdGreen and selectPlots == selectPlots.MACDOnly then Double.NEGATIVE_INFINITY else Double.NaN, Color.LIGHT_GREEN);
AddCloud(if macdRed and selectPlots == selectPlots.MACDOnly then Double.POSITIVE_INFINITY else Double.NaN, if macdRed and selectPlots == selectPlots.MACDOnly then Double.NEGATIVE_INFINITY else Double.NaN, Color.LIGHT_RED);

plot fifty = if selectPlots == selectPlots.RSI or selectPlots == selectPlots.Stochastic or selectPlots == selectPlots.Both then 50 else Double.NaN;
fifty.SetDefaultColor(Color.RED);

RSM MTF (Labels)

Features

Provides chart labels (upper left corner of price chart) with current status of MTF RSM Trend for the following TF's
1. 1m, 2m, 3m, 4m, 5m, 10m, 15m, 20m, 30m, 1h, 2h, 4h, 1d, 2d, 3d, 4d, 1wk, 1mnth
2. Add indicator for each time frame you would like shown

Code:

#START OF RSI/Stochastic/MACD Confluence Strategy for ThinkOrSwim
# RSM_MTF_Labels
#
#CHANGELOG
# 2020.12.30 V2.1 @SuryaKiranC - Fork from @cos251 Version, to reduce the number of lines in code and optimize for performance.
#
# 2020.12.11 V1.1 @cos251 - Added 2D, 3D, 4D, 1WK, 1MNTH Agg Period Labels
#
# 2020.12.02 V1.0 @cos251 - Added RSM signal calculation for following timeframes:
#                         - 1m, 2m, 5m, 15m, 30m, 1h, 2h, 4h, D
#                         - Label will be added to top of chart for every allowed TF
#                         - Label will read "TF:L(Long):S(Short):I(Idle)"
#                         - Label Color will be green, red or gray accordingly
#
#         
#REQUIREMENTS - RSI Set to 7, EXPONENTIAL
#               Stoch Slow 14 and 3 WILDERS
#               MACD 12,26,9 WEIGHTED
#
#ORIGINAL REQUEST - @Joseph Patrick 18
#                 - Link: https://usethinkscript.com/threads/mimicking-power-x-strategy-by-markus-heitkoetter.4283/
#
#

input period = AggregationPeriod.DAY;

DefineGlobalColor("UpTrend", Color.Green);
DefineGlobalColor("DownTrend", Color.RED);
DefineGlobalColor("NoTrend", Color.GRAY);

script RSM_ {

    input aP = AggregationPeriod.DAY;
    # RSI
    def lengthRSI = 7;
    def averageTypeRSI = AverageType.EXPONENTIAL;
    # Stochastic
    def over_boughtSt = 80;
    def over_soldSt = 20;
    def KPeriod = 14;
    def DPeriod = 3;
    input averageTypeStoch = AverageType.WILDERS;
    # MACD
    def fastLength = 12;
    def slowLength = 26;
    def MACDLength = 9;
    def averageTypeMACD = AverageType.WEIGHTED;

    ###############################################################
    ##########                 RSI                         #########
    ################################################################

    def NetChgAvg = MovingAverage(averageTypeRSI, close(period = aP) - close(period = aP)[1], lengthRSI);
    def TotChgAvg = MovingAverage(averageTypeRSI, AbsValue(close(period = aP) - close(period = aP)[1]), lengthRSI);
    def ChgRatio = if TotChgAvg != 0 then NetChgAvg / TotChgAvg else 0;
    def RSI_ = 50 * (ChgRatio + 1);

    ################################################################
    ##########                 Stochastic Slow             #########
    ################################################################

    def SlowK_ = reference StochasticFull(over_boughtSt,  over_soldSt,  KPeriod,  DPeriod,  high(period = aP),  low(period = aP),  close(period = aP),  3, if (averageTypeStoch == 1) then AverageType.SIMPLE else AverageType.EXPONENTIAL).FullK;
    def SlowD_ = reference StochasticFull(over_boughtSt,  over_soldSt,  KPeriod,  DPeriod,  high(period = aP),  low(period = aP),  close(period = aP),  3, if (averageTypeStoch == 1) then AverageType.SIMPLE else AverageType.EXPONENTIAL).FullD;

    ################################################################
    ##########                 MACD                      ###########
    ################################################################

    def Value_ = MovingAverage(averageTypeMACD, close(period = aP), fastLength) - MovingAverage(averageTypeMACD, close(period = aP), slowLength);
    def Avg_ = MovingAverage(averageTypeMACD, Value_, MACDLength);
    def Diff_ = Value_ - Avg_;

    #################################################################
    ##########          Trend  & Labels                   #########
    #################################################################
    def UpTrend_ = if RSI_ >= 50 and SlowK_ >= 50 and Value_ > Avg_ then 1 else 0;
    def DownTrend_ = if RSI_ < 50 and SlowK_ < 50 and Value_ < Avg_ then 1 else 0;
    plot Trend_ = if UpTrend_ then 1 else if DownTrend_ then 0 else -1;

}

def currentPeriod = GetAggregationPeriod();
def RSM;

if period >= currentPeriod {
    RSM = RSM_(aP = period);

} else {
    RSM = Double.NaN;

}

AddLabel(!IsNaN(RSM), if period == AggregationPeriod.MONTH then "M"
else if period == AggregationPeriod.WEEK then "W"
else if period == AggregationPeriod.FOUR_DAYS then "4D"
else if period == AggregationPeriod.THREE_DAYS then "3D"
else if period == AggregationPeriod.TWO_DAYS then "2D"
else if period == AggregationPeriod.DAY then "D"
else if period == AggregationPeriod.FOUR_HOURS then "4H"
else if period == AggregationPeriod.TWO_HOURS then "2H"
else if period == AggregationPeriod.HOUR then "60m"
else if period == AggregationPeriod.THIRTY_MIN then "30m"
else if period == AggregationPeriod.TWENTY_MIN then "20m"
else if period == AggregationPeriod.FIFTEEN_MIN then "15m"
else if period == AggregationPeriod.TEN_MIN then "10m"
else if period == AggregationPeriod.FIVE_MIN then "5m"
else if period == AggregationPeriod.FOUR_MIN then "4m"
else if period == AggregationPeriod.THREE_MIN then "3m"
else if period == AggregationPeriod.TWO_MIN then "2m"
else if period == AggregationPeriod.MIN then "1m"
else "", if RSM == 1 then GlobalColor("UpTrend") else if RSM == 0 then GlobalColor("DownTrend") else GlobalColor("NoTrend"));

RSM SCAN

Scanner Setup Instructions:
1. Click Create (Create New Study)
2. Remove the default plot statement and past the code block from RSM_SCAN.
3. Save the study with name "RSM_SCAN", make sure it is not loaded in your studies on the right, if it is loaded by default when you saved it, please remove we don't need this on chart study.
4. Go to Scan, Remove all the filters and add a new filter, select "Study" as a filter, Default study selected will be "ADXCrossOver", Click on Pencil Icon next to Default TimeFrame "D" and click "ThinkScript Editor".
5. Here you can past one of the scan query RSM_SCAN().UpTrendJustStarted or RSM_SCAN().DownTrendJustStarted.
6. You can even limit the scan results, select a default narrowed down list as "S&P 500" under "Scan In, on the scan tab itself.
7. Finally you can save the scan query with a name.
8. Repeat Step 4 to 7, for other scan queries.
The following scan queries are available
1. RSM_Scan().UpTrend (UpTrend in Progress, in the selected timeframe for Scan)
2. RSM_Scan().UpTrendJustStarted (Uptrend Just started, in the selected timeframe for Scan)
3. RSM_Scan().DownTrend (DownTrend in Progress, in the selected timeframe for Scan)
4. RSM_Scan().DownTrendJustStarted (DownTrend Just started, in the selected timeframe for Scan)
5. RSM_Scan().UpTrendJustEnded (UpTrend finished, in the selected timeframe for Scan)
6. RSM_Scan().DownTrendJustEnded (DownTrend finished, in the selected timeframe for Scan)
As always, please match the chart timeframe to your Scanner Settings for review.

Code:

#START OF RSI/Stochastic/MACD Confluence combo for ThinkOrSwim
#
# RSM_SCAN
#
#CHANGELOG
# 2020.12.05 - V1.0 @cos251 - RSM SCANS study - to be used to scan for following conditions:
#            - Stocks currently in UpTrend
#            - Stocks currently in DownTrend
#            - Stocks where UpTrendJustSarted - first bar of UpTrend for scanend TF
#            - Stocks where DownTrendJustStarted - first bar of DownTrend for scanned TF
#            - Stocks where UpTredJustEnded - first NO Trend bar after UpTrend
#            - Stocks where DownTrendJustEnded - first NO Trend bar after DownTrend
#            - Recommend using default studies for SCANS of RSI, Stochastics or MACD for efficiency
#             
#REQUIREMENTS - RSI Set to 7, EXPONENTIAL
#               Stoch Slow 14 and 3 WILDERS
#               MACD 12,26,9 WEIGHTED
#
#
#CREDITS
# requesed by "@Joseph Patrick 18"
#
#LINK
# https://rockwell-files.s3.amazonaws.com/PXCompanionGuide2ndEd_cover.pdf
# Markus Heikoetter who is the author of the Power X Strategy
# https://usethinkscript.com/threads/mimicking-power-x-strategy-by-markus-heitkoetter.4283/
#
#USAGE
#
declare lower;

plot fiftyLine = 50;
################################################################
##########                 RSI                         #########
################################################################

input lengthRSI = 7;
input over_BoughtRSI = 80;
input over_SoldRSI = 20;
input price = close;
input averageTypeRSI = AverageType.EXPONENTIAL;
def NetChgAvg = MovingAverage(averageTypeRSI, price - price[1], lengthRSI);
def TotChgAvg = MovingAverage(averageTypeRSI, AbsValue(price - price[1]), lengthRSI);
def ChgRatio = if TotChgAvg != 0 then NetChgAvg / TotChgAvg else 0;
def RSI = 50 * (ChgRatio + 1);


################################################################
##########                 Stochastic Slow             #########
################################################################
input over_boughtSt = 80;
input over_soldSt = 20;
input KPeriod = 14;
input DPeriod = 3;
input priceH = high;
input priceL = low;
input priceC = close;
input averageTypeStoch = AverageType.WILDERS;
def SlowK = reference StochasticFull(over_boughtSt, over_soldSt, KPeriod, DPeriod, priceH, priceL, priceC, 3, averageTypeStoch).FullK;
def SlowD = reference StochasticFull(over_boughtSt, over_soldSt, KPeriod, DPeriod, priceH, priceL, priceC, 3, averageTypeStoch).FullD;


#################################################################
############           MACD Calculation                 #########
#################################################################
input fastLength = 12;
input slowLength = 26;
input MACDLength = 9;
input averageTypeMACD = AverageType.WEIGHTED;
def Value = MovingAverage(averageTypeMACD, close, fastLength) - MovingAverage(averageTypeMACD, close, slowLength);
def Avg = MovingAverage(averageTypeMACD, Value, MACDLength);
def Diff = Value - Avg;


#################################################################
############          SCAN Variables                    #########
#################################################################

# If you want to scan for stocks that are not in either trend you can add two filters and scan for false for both conditions

# The UpTrend and DownTrend plots can be used to scan for stocks that are currently in that trend
plot UpTrend = if RSI > 50 and SlowK > 50 and Value > Avg then 1 else Double.NaN;
plot DownTrend = if RSI < 50 and SlowK < 50 and Value < Avg then 1 else Double.NaN;
UpTrend.Hide();
DownTrend.Hide();

# The UpTrendJustStarted and DownTrendJustStarted plots can be used to find stocks that have just started
# a trend in either direction
def UpTrendJustStartedBool = if RSI > 50 and SlowK > 50 and Value > Avg then 1 else 0;
def DownTrendJustStartedBool = if RSI < 50 and SlowK < 50 and Value < Avg then 1 else 0;
plot UpTrendJustStarted = if UpTrendJustStartedBool == 1 and UpTrendJustStartedBool[1] == 0 then 1 else Double.NaN;
plot DownTrendJustStarted = if DownTrendJustStartedBool == 1 and DownTrendJustStartedBool[1] == 0 then 1 else Double.NaN;
UpTrendJustStarted.Hide();
DownTrendJustStarted.Hide();
plot UpTrendJustEnded= if UpTrendJustStartedBool[1] == 1 and UpTrendJustStartedBool == 0 then 1 else Double.NaN;
plot DownTrendJustEnded= if DownTrendJustStartedBool[1] == 1 and DownTrendJustStartedBool == 0 then 1 else Double.NaN;
UpTrendJustEnded.Hide();
DownTrendJustEnded.Hide();

hi bro @cos251 Thank you very much for this great job. I tell you I am trying to use this Scan type script in TOS but the system says: Exactly one plot expected, could you please tell me how to fix it
Thanks ,)

ApeX Predator · Jan 30, 2021

@Alkkkz there is nothing wrong with the indicator, trend in each timeframe can be different, generally we refer to higher frames to see how far trend is or if trend is starting from lower frames to higher and take the trade or not.

As described it works on all 3 indicators crossing over their mid line and stay in the direction of crossover.

@Chence27 I use this for live trading and been using it for 5 - 6 weeks. As always when entering a trade always look for where the stock is with respective of atleast 21 days.

@hexis777 You are pasting the whole code in scanner, please check the video and instructions for the scanner setup in the original post.

Kitchasap · Jan 30, 2021

Thanks a lot Guys, I got the PowerX book after reading these posts. It has been very helpful!.

Thread starter	Similar threads	Forum	Replies	Date
C	RSM Indicator for ThinkorSwim	Indicators	100	Jan 29, 2021
	Repaints Cup and Handle Indicator for ThinkorSwim	Indicators	23	Jan 2, 2024
	The Ultimate Buy and Sell Indicator for ThinkOrSwim	Indicators	5	Dec 4, 2023
	Z-Score Probability Indicator for ThinkOrSwim	Indicators	29	Jun 11, 2023
	HTF PO3 Indicator For ThinkOrSwim	Indicators	40	Mar 31, 2023

Archives: RSM Indicator for ThinkorSwim

Well-known member

These are the archived posts for the RSM. The current thread can be found:​

RSM Upper

RSM Lower

RSM MTF (Labels)

RSM SCAN

STRATEGY

Well-known member

Member

Member

Member

New member

New member

Member

Options Expert

New member

Options Expert

Well-known member

New member

Well-known member

Active member

New member

Active member

Member

RSM Upper

RSM Lower

RSM MTF (Labels)

RSM SCAN

Well-known member

Member

Similar threads

Not the exact question you're looking for?

Similar threads

Similar threads

The Market Trading Game Changer

Frequently Asked Questions

These are the archived posts for the RSM. The current thread can be found: