DEEPWATER_THE ONE For ThinkOrSwim

BJ1951 · Aug 18, 2021

I call this study THE ONE. It is basically throw everything but the kitchen sink into one study that would help both a new trader and an experienced trader, Alerts me to things gapping, stocks suddenly seeing large volume, stocks with RSIs in extreme ranges. There are so many widgets of script in here that I look forward to others trying to improve it for the group. It is my payback to all of you who taught me so much and were unselfish with your knowledge and code. This is the one study I can not live without. I have 3 monitors and 30 charts I watch and "THE ONE" is the only indicator under each chart. I recently added what I call cumulative RSI extreme to it. What it does is if RSI goes overbought or oversold it starts cumulating and incrementing a count that seems to give a pretty good sell or buy signal. I have never seen this done and it is some neat code. I also look at MACD as it rounds over the top or bottom to trigger buy or sell signals. I do this with Spikes. Spikes from the top down are sells. Spikes from the Bottom up are buys. IT MAY BE THE EASIEST STUDY AS FAR AS SIGNALING. IF SOMETHING IS IN ALERT AND NEEDS A LOOK YOU GET AN ALERT. EASY FOR NOVICE and NEWBIES. Just load it and watch it for a week. This is not financial advice. it is a tool to help you make your own decisions.

P.S. The code will give signals a bit differently on different time scales so always look at charts that are say 1D 1Min, 2D 5Min and 10D 30Min (these are only examples) and compare the buy and sell signals it's giving you. I am Also running BillWilliams Indicator and Christpher84 ConfirmationCandles (without the arrows) upper and CC Candles Lower Indicators plus I also am running RSI with a RSI Avg only on my main screen chart.
5/17/2021 Added a stronger Buy indicator discriminator for Yellow/Green Buy Spikes.
5/20/2021 Added a stronger buy signal (taller) if a second buy comes within 14 candles of a previous strong buy. Changed Line Width to 2 or 3 to sharpen signal visibility. Reordered plot of yellow line to be after plot of stronger Green buys therefore you should only see Yellow Spike for over sold and only a larger Green Spike for the Strong Buy. No more yellow/Green Spikes.
5/27/2021 Rev 4 Changed RSI threashholds to 65 from 68 and 70 so a Strong Sell Signal should be generated more often at the Tops. changed the 10X volume jump to a 30X volume Jump and set the 5X Volume jump from 8x (mistake) back to 5X.

Note: The Words BUY SIGNAL SELL SIGNAL RSI BUY are added to the graphic for clarification and DO NOT Appear in the study

Code:

#DEEPWATER_THE ONE 5/27/2021 revision 4
#https://usethinkscript.com/threads/deepwater_the-one.6518/
declare lower;
input length = 20;
input length2 = 15;
input price = close;
input averageType = AverageType.WILDERS;

input fastLength = 12;
input slowLength = 26;
input MACDLength = 9;
input averageTypeMACD = AverageType.EXPONENTIAL;

def Diff = MACD(fastLength, slowLength, MACDLength, averageTypeMACD).Diff;

def NetChgAvg = MovingAverage(averageType, price - price[1], length);
def TotChgAvg = MovingAverage(averageType, AbsValue(price - price[1]), length);
def ChgRatio = if TotChgAvg != 0 then NetChgAvg / TotChgAvg else 0;

def RSI = 50 * (ChgRatio + 1);
def RSIAvg3 = MovingAverage(averageType, (RSI), 3);
def RSIAvg5 = MovingAverage(averageType, (RSI), 5);
def RSI3OverSoldpivit = RSIAvg3 > RSIAvg3[1] and RSIAvg3[1] > RSIAvg3[2] and RSIAvg3[2] < RSIAvg3[3] and RSIAvg3[3] < RSIAvg3 [4];
def RSI3OverBoughtpivit = RSIAvg3 < RSIAvg3[1] and RSIAvg3[1] < RSIAvg3[2] and RSIAvg3[2] > RSIAvg3[3] and RSIAvg3[3] > RSIAvg3 [4];
#--------------------5 day MA
input displace = 0;
input showBreakoutSignals = no;
def MAvgExp14 = ExpAverage(price[-displace], 14);
#--------------------oversold
def twoBarPivotMACD = Diff > Diff[1] and Diff[1] > Diff[2] and Diff[2] < Diff[3] and Diff[3] < Diff [4];

def overSoldRSI = RSI <= 32;
def overSoldRSIHeavy = RSI <= 30 and Diff < 0 and (close < close[7]);
def TrendReversalalert = (twoBarPivotMACD and Highest(overSoldRSI, 6) > 0) / 3;

Alert(TrendReversalalert, "Buy Alert");
plot TrendReversal1 = (twoBarPivotMACD and RSIAvg3 < 45 and Highest(overSoldRSIHeavy, 6) > 0) / 1.4;
plot TrendReversalstrongbuy = ((TrendReversal1[1] > 0 or TrendReversal1[2] > 0 or TrendReversal1[3] > 0 or TrendReversal1[4] > 0 or TrendReversal1[5] > 0 or TrendReversal1[6] > 0 or TrendReversal1[7] > 0 or TrendReversal1[8] > 0 or TrendReversal1[9] > 0 or TrendReversal1[10] > 0 or TrendReversal1[11] > 0 or TrendReversal1[12] > 0 or TrendReversal1[13] > 0 or TrendReversal1[14] > 0) and twoBarPivotMACD and RSIAvg3 < 45 and Highest(overSoldRSIHeavy, 6) > 0) / 1.1;
plot TrendReversal = (twoBarPivotMACD and TrendReversalstrongbuy < 1 and Highest(overSoldRSI, 6) > 0) / 3;

TrendReversal.SetDefaultColor(GetColor(4));#yellow
TrendReversal1.SetDefaultColor(GetColor(6));#green
TrendReversalstrongbuy.SetDefaultColor(GetColor(6));#green
TrendReversalstrongbuy.SetLineWeight(3);
TrendReversal1.SetLineWeight(2);


AddLabel(yes, if  TrendReversal > 0 then "Buy" else "");
Alert( TrendReversalalert > 0,  "Chart is now Oversold ", Alert.BAR, Sound.Ring);
AddLabel(TrendReversalalert > 0
, "Chart is now Oversold ", Color.LIME);
#-----------------------Overbought
def twoBarPivotMACD1 = Diff < Diff[1] and Diff[1] < Diff[2] and Diff[2] > Diff[3] and Diff[3] > Diff [4];

def overboughtRSI = RSIAvg3 >= 65 and Diff > 0;
def TrendReversalalert20 = (twoBarPivotMACD1 and Highest(overboughtRSI[1], 7) > 0);
plot TrendReversal20 = 1 - (((RSIAvg3 >= 65 and RSI < RSIAvg3[2]) and RSI3OverBoughtpivit)/ 1.5) ;
plot TrendReversal20a = 1 - ((((RSIAvg3 >= 60 and RSIAvg3 < 65 )and RSI < RSIAvg3[2]) and RSI3OverBoughtpivit) / 4) ;

TrendReversal20.SetDefaultColor(GetColor(5)); #Red
TrendReversal20a.SetDefaultColor(GetColor(2)); #lt Red
TrendReversal20a.SetLineWeight(2);
TrendReversal20.SetLineWeight(3);
plot TrendReversal50 = 1 - ((RSIAvg5 >= 65 and close < MAvgExp14) / 2) ;
TrendReversal50.SetDefaultColor(GetColor(0)); #Red
TrendReversal50.SetLineWeight(3);
AddLabel(yes, if  TrendReversal20 < 1 then "Sell" else "");
Alert( TrendReversal20 < 1 ,  "Chart is now Overbought ", Alert.BAR, Sound.Ring);
AddLabel(TrendReversal20 < 1, "Chart is now Overbought ", Color.LIME);
input show_label = yes;
input show_bubble = no;
#--------------------------- Large 5X and 30X Volume Alert
input AverageLength = 100;
input VolumeMultiplier = 8;
input VolumeMultiplier2 = 5;
input MinutesAfterOpen = 30;

def AvgVol = Average(volume, AverageLength);
def VolX = (volume > AvgVol * VolumeMultiplier2) ;
def Vol30X = (volume > AvgVol * 30) ;

Alert(VolX, Concat(GetSymbolPart(), " has a large volume spike." ), Alert.BAR, Sound.Chimes);
AddLabel(VolX > 0,  " Has 5X Volume Spike ", Color.LIGHT_GREEN);
Alert(Vol30X, Concat(GetSymbolPart(), " has a large volume spike." ), Alert.BAR, Sound.Chimes);
AddLabel(Vol30X > 0,  " Has 30X Volume Spike ", Color.LIGHT_GREEN);
#-------------------------------------GAP UP Price
def IsUp = close > open;
def IsDown = close < open;
def IsDoji = IsDoji();
def avgRange = 0.05 * Average(high - low, 20);
def GapUp =
    IsUp[1] and
    IsUp[0] and
    high[1] < low[0] and
    high[1] < open[0] and
(volume > AvgVol * 5) ;
Alert(GapUp, Concat(GetSymbolPart(), " GAPUP" ), Alert.BAR, Sound.Ring);
AddLabel(GapUp > 0,  " GAP Up  ", Color.LIGHT_GREEN);

#---------------------------------Large Price change 3%
def Priceup =
    IsUp[1] and
    IsUp[0] and
    high[1] < high[0] and
    high[2] * 1.02 < high[0] and
    high[3] * 1.03 < high[0] and
(volume > AvgVol * 3) ;
Alert(Priceup, Concat(GetSymbolPart(), " Price JUMP" ), Alert.BAR, Sound.Bell);
AddLabel(Priceup > 0,  " Price JUMP  ", Color.CYAN);

#---------------------------------HugePrice change 6%
def Priceup2 =
    IsUp[1] and
    IsUp[0] and
    high[1] < high[0] and
    high[3] * 1.04 < high[0] and
    high[4] * 1.06 < high[0] and
(volume > AvgVol * 3) ;
Alert(Priceup2, Concat(GetSymbolPart(), " JUMP! JUMP! JUMP" ), Alert.BAR, Sound.Chimes);
AddLabel(Priceup2 > 0,  " JUMP! JUMP! JUMP  ", Color.LIGHT_RED);

#-----------------------------------------------------------------------------------------
#--------------------------RSI cumulative running total
def MAvgExp7 = ExpAverage(price[-displace], 7);
def RSICalc = 50 * (ChgRatio + 1);
def RSICalc1 = if RSI > 70 then  3 else if RSI < 30 then  -3 else 0;
def RSICalc2 = if RSI[1] > 70 then  2 else if RSI[1] < 30 then  -2 else 0;
def RSICalc3 = if RSI[2] > 70 then  1 else if RSI[2] < 30 then  -1 else 0;
def RSICalc4 = if RSI[3] > 70 then  1 else if RSI[3] < 30 then  -1 else 0;
def RSICalc5 = if RSI[4] > 70 then  1 else if RSI[4] < 30 then  -1 else 0;
def RSICalc6 = if RSI[5] > 70 then  1 else if RSI[5] < 30 then  -1 else 0;
def RSICalc7 = if RSI[6] > 70 then  1 else if RSI[6] < 30 then  -1 else 0;
def RSICalc8 = if RSI[7] > 70 then  1 else if RSI[7] < 30 then  -1 else 0;
def RSICalc9 = if RSI[8] > 70 then  1 else if RSI[8] < 30 then  -1 else 0;
def RSICalc10 = if RSI[9] > 70 then  1 else if RSI[9] < 30 then  -1 else 0;
def RSICalc11 = if RSI[10] > 70 then  1 else if RSI[10] < 30 then  -1 else 0;
def RSICalc12 = if RSI[11] > 70 then  1 else if RSI[11] < 30 then  -1 else 0;
def RSICalc13 = if RSI[12] > 70 then  1 else if RSI[12] < 30 then  -1 else 0;
def RSICalc14 = if RSI[13] > 70 then  1 else if RSI[13] < 30 then  -1 else 0;
def RSICalc15 = if RSI[14] > 70 then  1 else if RSI[14] < 30 then  -1 else 0;
def RSICalc16 = if RSI[15] > 70 then  1 else if RSI[15] < 30 then  -1 else 0;
def RSICalc17 = if RSI[16] > 70 then  1 else if RSI[16] < 30 then  -1 else 0;
def RSICalc18 = if RSI[17] > 70 then  1 else if RSI[17] < 30 then  -1 else 0;
def RSICalc19 = if RSI[18] > 70 then  1 else if RSI[18] < 30 then  -1 else 0;
def RSICalc20 = if RSI[19] > 70 then  1 else if RSI[19] < 30 then  -1 else 0;
def RSICalc21 = if RSI[20] > 70 then  1 else if RSI[20] < 30 then  -1 else 0;
def RSICalc22 = if RSI[21] > 70 then  1 else if RSI[21] < 30 then  -1 else 0;
def RSICalc23 = if RSI[22] > 70 then  1 else if RSI[22] < 30 then  -1 else 0;
def RSICalc24 = if RSI[23] > 70 then  1 else if RSI[23] < 30 then  -1 else 0;
def RSICalc25 = if RSI[24] > 70 then  1 else if RSI[24] < 30 then  -1 else 0;
def RSICalc26 = if RSI[25] > 70 then  1 else if RSI[25] < 30 then  -1 else 0;
def RSICalc27 = if RSI[26] > 70 then  1 else if RSI[26] < 30 then  -1 else 0;
def RSICalc28 = if RSI[27] > 70 then  1 else if RSI[27] < 30 then  -1 else 0;
def RSICalc29 = if RSI[28] > 70 then  1 else if RSI[28] < 30 then  -1 else 0;
def RSICalc30 = if RSI[29] > 70 then  1 else if RSI[29] < 30 then  -1 else 0;

def RSI30DayAvg = RSICalc1 + RSICalc2 + RSICalc3 + RSICalc4 + RSICalc5 + RSICalc6 + RSICalc7 + RSICalc8 + RSICalc9 + RSICalc10 + RSICalc11 + RSICalc12 + RSICalc13 + RSICalc14 + RSICalc15 + RSICalc16 + RSICalc17 + RSICalc18 + RSICalc19 + RSICalc20 + RSICalc21 + RSICalc22 + RSICalc23 + RSICalc24 + RSICalc25 + RSICalc26 + RSICalc27 + RSICalc28 + RSICalc29 + RSICalc30;
AddLabel(RSI30DayAvg >= 10 and RSI30DayAvg < 20, " RSI SELL: " + RSI30DayAvg + "   ",  Color.ORANGE);
AddLabel(RSI30DayAvg >= 20, " RSI SELL: " + RSI30DayAvg + "   ",  Color.RED);
AddLabel(RSI30DayAvg <= -10 and RSI30DayAvg > -20, " RSI BUY: " + RSI30DayAvg + "   ",  Color.LIME);
AddLabel(RSI30DayAvg <= -20, " RSI BUY: " + RSI30DayAvg + "   ",  Color.DARK_GREEN);
plot TrendReversal5 = 1 - (((RSI30DayAvg >= 10 and RSI30DayAvg < 15) and close < MAvgExp7) / 2) ;
TrendReversal5.SetDefaultColor(GetColor(0)); #magenta
plot TrendReversal5a = 1 - (((RSI30DayAvg >= 16  and RSI30DayAvg < 25) and close < MAvgExp7) / 1.3) ;
TrendReversal5a.SetDefaultColor(GetColor(0)); #magenta
plot TrendReversal5b = 1 - ((RSI30DayAvg >= 25 and close < MAvgExp7) / 1.05) ;
TrendReversal5b.SetDefaultColor(GetColor(0)); #magenta
plot TrendReversal6 = ((RSI30DayAvg <= -15 and close > MAvgExp7 ) * .3) ;
TrendReversal6.SetDefaultColor(GetColor(6)); #green
plot TrendReversal6a = (((RSI30DayAvg <= -20 and RSI30DayAvg > -30) and close > MAvgExp7) * .85) ;
TrendReversal6a.SetDefaultColor(GetColor(6)); #green
TrendReversal6a.SetLineWeight(3);
TrendReversal5b.SetLineWeight(3);
TrendReversal6.SetLineWeight(2);
TrendReversal5a.SetLineWeight(2);
#End Code

Love the Deepwater indicator great job. Question I trade forex and can not get it to work at all any suggestions. Thanks again

Deepwater · Aug 19, 2021

BJ1951 said:
Love the Deepwater indicator great job. Question I trade forex and can not get it to work at all any suggestions. Thanks again

Thanks BJ, Can you get RSI or MACD to work with your Forex? You use the FOREX TRADER menu item under TRADE vice the ACTIVE TRADER?
I have never done Forex so I am curious what TA Indicators or Studies you can use

Deepwater · Aug 19, 2021

CaptainNORDO said:
I just wanted to say, thank you for sharing this with the group! Really helpful indicator

Your welcome. I am happy this is a quiet thread, cause that tells me folks can figure out the indicator themselves and it works well. It's good to hear people are happy with it

BJ1951 · Aug 19, 2021

Yes use both and some others B4 and Thermo Lookback bars and change all settings on all indicators.I was interested in Deep Water but something in the script causes it to not work.

Deepwater · Aug 19, 2021

I remember someone saying that thinkorswim doesn't like volume in studies for certain things (like FOREX) so I stripped out the volume alerts.
DEEPWATER_THE ONE_FOREX (Also works with SPY and other index funds)

Code:

#DEEPWATER_THE ONE_FOREX 8/19/2021 revision 4forex No Volume
#https://usethinkscript.com/threads/deepwater_the-one.6518/
declare lower;
input length = 20;
input length2 = 15;
input price = close;
input averageType = AverageType.WILDERS;

input fastLength = 12;
input slowLength = 26;
input MACDLength = 9;
input averageTypeMACD = AverageType.EXPONENTIAL;

def Diff = MACD(fastLength, slowLength, MACDLength, averageTypeMACD).Diff;

def NetChgAvg = MovingAverage(averageType, price - price[1], length);
def TotChgAvg = MovingAverage(averageType, AbsValue(price - price[1]), length);
def ChgRatio = if TotChgAvg != 0 then NetChgAvg / TotChgAvg else 0;

def RSI = 50 * (ChgRatio + 1);
def RSIAvg3 = MovingAverage(averageType, (RSI), 3);
def RSIAvg5 = MovingAverage(averageType, (RSI), 5);
def RSI3OverSoldpivit = RSIAvg3 > RSIAvg3[1] and RSIAvg3[1] > RSIAvg3[2] and RSIAvg3[2] < RSIAvg3[3] and RSIAvg3[3] < RSIAvg3 [4];
def RSI3OverBoughtpivit = RSIAvg3 < RSIAvg3[1] and RSIAvg3[1] < RSIAvg3[2] and RSIAvg3[2] > RSIAvg3[3] and RSIAvg3[3] > RSIAvg3 [4];
#--------------------5 day MA
input displace = 0;
input showBreakoutSignals = no;
def MAvgExp14 = ExpAverage(price[-displace], 14);
#--------------------oversold
def twoBarPivotMACD = Diff > Diff[1] and Diff[1] > Diff[2] and Diff[2] < Diff[3] and Diff[3] < Diff [4];

def overSoldRSI = RSI <= 32;
def overSoldRSIHeavy = RSI <= 30 and Diff < 0 and (close < close[7]);
def TrendReversalalert = (twoBarPivotMACD and Highest(overSoldRSI, 6) > 0) / 3;

Alert(TrendReversalalert, "Buy Alert");
plot TrendReversal1 = (twoBarPivotMACD and RSIAvg3 < 45 and Highest(overSoldRSIHeavy, 6) > 0) / 1.4;
plot TrendReversalstrongbuy = ((TrendReversal1[1] > 0 or TrendReversal1[2] > 0 or TrendReversal1[3] > 0 or TrendReversal1[4] > 0 or TrendReversal1[5] > 0 or TrendReversal1[6] > 0 or TrendReversal1[7] > 0 or TrendReversal1[8] > 0 or TrendReversal1[9] > 0 or TrendReversal1[10] > 0 or TrendReversal1[11] > 0 or TrendReversal1[12] > 0 or TrendReversal1[13] > 0 or TrendReversal1[14] > 0) and twoBarPivotMACD and RSIAvg3 < 45 and Highest(overSoldRSIHeavy, 6) > 0) / 1.1;
plot TrendReversal = (twoBarPivotMACD and TrendReversalstrongbuy < 1 and Highest(overSoldRSI, 6) > 0) / 3;

TrendReversal.SetDefaultColor(GetColor(4));#yellow
TrendReversal1.SetDefaultColor(GetColor(6));#green
TrendReversalstrongbuy.SetDefaultColor(GetColor(6));#green
TrendReversalstrongbuy.SetLineWeight(3);
TrendReversal1.SetLineWeight(2);


AddLabel(yes, if  TrendReversal > 0 then "Buy" else "");
Alert( TrendReversalalert > 0,  "Chart is now Oversold ", Alert.BAR, Sound.Ring);
AddLabel(TrendReversalalert > 0
, "Chart is now Oversold ", Color.LIME);
#-----------------------Overbought
def twoBarPivotMACD1 = Diff < Diff[1] and Diff[1] < Diff[2] and Diff[2] > Diff[3] and Diff[3] > Diff [4];

def overboughtRSI = RSIAvg3 >= 65 and Diff > 0;
def TrendReversalalert20 = (twoBarPivotMACD1 and Highest(overboughtRSI[1], 7) > 0);
plot TrendReversal20 = 1 - (((RSIAvg3 >= 68 and RSI < RSIAvg3[2]) and RSI3OverBoughtpivit)/ 1.5) ;
plot TrendReversal20a = 1 - ((((RSIAvg3 >= 60 and RSIAvg3 < 65 )and RSI < RSIAvg3[2]) and RSI3OverBoughtpivit) / 4) ;

TrendReversal20.SetDefaultColor(GetColor(5)); #Red
TrendReversal20a.SetDefaultColor(GetColor(2)); #lt Red
TrendReversal20a.SetLineWeight(2);
TrendReversal20.SetLineWeight(3);
plot TrendReversal50 = 1 - ((RSIAvg5 >= 65 and close < MAvgExp14) / 2) ;
TrendReversal50.SetDefaultColor(GetColor(0)); #Red
TrendReversal50.SetLineWeight(3);
AddLabel(yes, if  TrendReversal20 < 1 then "Sell" else "");
Alert( TrendReversal20 < 1 ,  "Chart is now Overbought ", Alert.BAR, Sound.Ring);
AddLabel(TrendReversal20 < 1, "Chart is now Overbought ", Color.LIME);
input show_label = yes;
input show_bubble = no;


#--------------------------RSI cumulative running total
def MAvgExp7 = ExpAverage(price[-displace], 7);
def RSICalc = 50 * (ChgRatio + 1);
def RSICalc1 = if RSI > 70 then  3 else if RSI < 30 then  -3 else 0;
def RSICalc2 = if RSI[1] > 70 then  2 else if RSI[1] < 30 then  -2 else 0;
def RSICalc3 = if RSI[2] > 70 then  1 else if RSI[2] < 30 then  -1 else 0;
def RSICalc4 = if RSI[3] > 70 then  1 else if RSI[3] < 30 then  -1 else 0;
def RSICalc5 = if RSI[4] > 70 then  1 else if RSI[4] < 30 then  -1 else 0;
def RSICalc6 = if RSI[5] > 70 then  1 else if RSI[5] < 30 then  -1 else 0;
def RSICalc7 = if RSI[6] > 70 then  1 else if RSI[6] < 30 then  -1 else 0;
def RSICalc8 = if RSI[7] > 70 then  1 else if RSI[7] < 30 then  -1 else 0;
def RSICalc9 = if RSI[8] > 70 then  1 else if RSI[8] < 30 then  -1 else 0;
def RSICalc10 = if RSI[9] > 70 then  1 else if RSI[9] < 30 then  -1 else 0;
def RSICalc11 = if RSI[10] > 70 then  1 else if RSI[10] < 30 then  -1 else 0;
def RSICalc12 = if RSI[11] > 70 then  1 else if RSI[11] < 30 then  -1 else 0;
def RSICalc13 = if RSI[12] > 70 then  1 else if RSI[12] < 30 then  -1 else 0;
def RSICalc14 = if RSI[13] > 70 then  1 else if RSI[13] < 30 then  -1 else 0;
def RSICalc15 = if RSI[14] > 70 then  1 else if RSI[14] < 30 then  -1 else 0;
def RSICalc16 = if RSI[15] > 70 then  1 else if RSI[15] < 30 then  -1 else 0;
def RSICalc17 = if RSI[16] > 70 then  1 else if RSI[16] < 30 then  -1 else 0;
def RSICalc18 = if RSI[17] > 70 then  1 else if RSI[17] < 30 then  -1 else 0;
def RSICalc19 = if RSI[18] > 70 then  1 else if RSI[18] < 30 then  -1 else 0;
def RSICalc20 = if RSI[19] > 70 then  1 else if RSI[19] < 30 then  -1 else 0;
def RSICalc21 = if RSI[20] > 70 then  1 else if RSI[20] < 30 then  -1 else 0;
def RSICalc22 = if RSI[21] > 70 then  1 else if RSI[21] < 30 then  -1 else 0;
def RSICalc23 = if RSI[22] > 70 then  1 else if RSI[22] < 30 then  -1 else 0;
def RSICalc24 = if RSI[23] > 70 then  1 else if RSI[23] < 30 then  -1 else 0;
def RSICalc25 = if RSI[24] > 70 then  1 else if RSI[24] < 30 then  -1 else 0;
def RSICalc26 = if RSI[25] > 70 then  1 else if RSI[25] < 30 then  -1 else 0;
def RSICalc27 = if RSI[26] > 70 then  1 else if RSI[26] < 30 then  -1 else 0;
def RSICalc28 = if RSI[27] > 70 then  1 else if RSI[27] < 30 then  -1 else 0;
def RSICalc29 = if RSI[28] > 70 then  1 else if RSI[28] < 30 then  -1 else 0;
def RSICalc30 = if RSI[29] > 70 then  1 else if RSI[29] < 30 then  -1 else 0;

def RSI30DayAvg = RSICalc1 + RSICalc2 + RSICalc3 + RSICalc4 + RSICalc5 + RSICalc6 + RSICalc7 + RSICalc8 + RSICalc9 + RSICalc10 + RSICalc11 + RSICalc12 + RSICalc13 + RSICalc14 + RSICalc15 + RSICalc16 + RSICalc17 + RSICalc18 + RSICalc19 + RSICalc20 + RSICalc21 + RSICalc22 + RSICalc23 + RSICalc24 + RSICalc25 + RSICalc26 + RSICalc27 + RSICalc28 + RSICalc29 + RSICalc30;
def RSIAvgpercent = AbsValue((RSI30DayAvg / 32) * 100);
AddLabel(RSI30DayAvg >= 10 and RSI30DayAvg < 20, " RSI SELL: " + RSIAvgpercent + " Strength   ",  Color.ORANGE);
AddLabel(RSI30DayAvg >= 20, " RSI STRONG SELL: " +  RSIAvgpercent + " LOOK TO SELL   ",  Color.RED);

AddLabel(RSI30DayAvg <= -10 and RSI30DayAvg > -20, " RSI BUY: " + RSIAvgpercent + " Strength    ",  Color.LIME);
AddLabel(RSI30DayAvg <= -20, " RSI STRONG BUY: " +  RSIAvgpercent + " LOOK TO BUY   ",  Color.DARK_GREEN);
plot TrendReversal5 = 1 - (((RSI30DayAvg >= 10 and RSI30DayAvg < 15) and close < MAvgExp7) / 2) ;
TrendReversal5.SetDefaultColor(GetColor(0)); #magenta
plot TrendReversal5a = 1 - (((RSI30DayAvg >= 16  and RSI30DayAvg < 25) and close < MAvgExp7) / 1.3) ;
TrendReversal5a.SetDefaultColor(GetColor(0)); #magenta
plot TrendReversal5b = 1 - ((RSI30DayAvg >= 25 and close < MAvgExp7) / 1.05) ;
TrendReversal5b.SetDefaultColor(GetColor(0)); #magenta
plot TrendReversal6 = ((RSI30DayAvg <= -15 and close > MAvgExp7 ) * .3) ;
TrendReversal6.SetDefaultColor(GetColor(6)); #green
plot TrendReversal6a = (((RSI30DayAvg <= -20 and RSI30DayAvg > -30) and close > MAvgExp7) * .85) ;
TrendReversal6a.SetDefaultColor(GetColor(6)); #green
TrendReversal6a.SetLineWeight(3);
TrendReversal5b.SetLineWeight(3);
TrendReversal6.SetLineWeight(2);
TrendReversal5a.SetLineWeight(2);
#End Code
{/CODE}

Deepwater · Aug 19, 2021

BJ1951 said:
Yes use both and some others B4 and Thermo Lookback bars and change all settings on all indicators.I was interested in Deep Water but something in the script causes it to not work.

BJ, Try the code I posted for forex above

Deepwater · Sep 5, 2021

BJ1951 said:
Love it, great job. thank you so much, looks very very promising

BJ how is the Forex version working out?

Deepwater · Sep 8, 2021

Page 10 code works with SPX and other indexes as well as Forex

Deepwater · Dec 23, 2021

Merry Christmas Everyone and Happy New Year, My 2022 is going to be profitable I pray, even though it looks like risk-adverse times ahead. Always opportunity.

ssimonn · Dec 23, 2021

Deepwater said:
Merry Christmas Everyone and Happy New Year, My 2022 is going to be profitable I pray, even though it looks like risk-adverse times ahead. Always opportunity.

Same to you and your family, be blessed

Deepwater · Feb 4, 2022

I changed Avg Volume length variable from 100 to 2000 to try and minimize fake volume alerts Rev 5 on page 1

Semserus · Apr 5, 2022

Deepwater said:
I changed Avg Volume length variable from 100 to 2000 to try and minimize fake volume alerts Rev 5 on page 1

Hi, Do You have anything New..?

Deepwater · Apr 20, 2022

Semserus said:
Hi, Do You have anything New..?

No Semserus it's running good

Neo_Matrix · May 17, 2023

Just want to say this is one of the best indicators I’ve ever used. Thanks for making it.

thatsben · Jun 9, 2023

ImKidKid said:
I built it to be used on the 1 min timeframe.

View attachment 10591

Wow, great job. I just stared using the 1min timeframe and think your spot on with your changes. Do you mind sharing you grid. @ImKidKid Thank you.

MerryDay · Jun 9, 2023

thatsben said:
Wow, great job. I just stared using the 1min timeframe and think your spot on with your changes. Do you mind sharing you grid. @ImKidKid Thank you.

Did you know that by clicking on a member's name, you can easily check when they were last seen on the uTS forum? It's a great way to keep track of who's been around recently, and who hasn't. Speaking of which, it looks like @ImKidKid is no longer active.

Thread starter	Similar threads	Forum	Replies	Date
	Repaints Cup and Handle Indicator for ThinkorSwim	Indicators	23	Jan 2, 2024
	Loken (v4) Bullish Smart Money for ThinkOrSwim	Indicators	31	Sep 22, 2023
	Quarterly Theory For ThinkOrSwim	Indicators	23	Sep 12, 2023
R	Megalodon Momentum For ThinkOrSwim	Indicators	34	Jun 22, 2023
T	Mega Moving Average For ThinkOrSwim	Indicators	26	Jun 13, 2023

DEEPWATER_THE ONE For ThinkOrSwim

BJ1951

New member

Deepwater

Member

Deepwater

Member

BJ1951

New member

Deepwater

Member

Deepwater

Member

Deepwater

Member

Deepwater

Member

Deepwater

Member

ssimonn

New member

Deepwater

Member

Semserus

New member

Deepwater

Member

Neo_Matrix

New member

thatsben

New member

MerryDay

Administrative

Similar threads

Not the exact question you're looking for?

Similar threads

Similar threads

The Market Trading Game Changer

Frequently Asked Questions